With the warning from the core about missing firmware gone,
users still may be notified of missing optional firmware by
a more friendly message to clarify it's optional.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
Add ACA support for vcn v4.0.3.
v2:
- split VCN ACA(v1) to 2 parts: vcn and jpeg.
- move mmSMNAID_AID0_MCA_SMU to amdgpu_aca.h file.
v3:
- split JPEG ACA to another patch.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After the introduction of NPS RAS, one bad page record on eeprom may be
related to 1 or 16 bad pages, so the bad page record and bad page are
two different concepts, define a new variable to store bad page number.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Init function is for ras table header read and check function is
responsible for the validation of the header. Call them in different
stages.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the firmware that is loaded by amdgpu is not actually required.
For example the ISP firmware on some SoCs is optional, and if it's not
present the ISP IP block just won't be initialized.
The firmware loader core however will show a warning when this happens
like this:
```
Direct firmware load for amdgpu/isp_4_1_0.bin failed with error -2
```
To avoid confusion for non-required firmware, adjust the amd-ucode helper
to take an extra argument indicating if the firmware is required or
optional.
On optional firmware use firmware_request_nowarn() instead of
request_firmware() to avoid the warnings.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/amd-gfx/df71d375-7abd-4b32-97ce-15e57846eed8@amd.com/T/#t
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update cwsr area size for gfx950 to fit the new user queue buffer validation.
The size of LDS calculation is referred from gfx950 thunk implementation.
Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfx-9 trap handler is reading LDS allocation size in 256 bytes
granularity (from SQ_WAVE_LDS_ALLOC), but it using the assumption that
this value is always even (i.e. the LDS allocation is really done in
multiple of 512 bytes). This was true so far, but gfx-950 allocates LDS
in chunks of 1280 bytes, making this assumption invalid. This can cause
the trap handler to try to save / restore past the end of LDS, and past
the LDS allocated slot in the save are, overriding data from the
following wave.
This patch updates the trap handler to support LDS allocated in 1280
bytes blocks:
- During restore, copy from main memory directly to LDS in batch of 1280
bytes.
- During save, continue to use 512 bytes blocks (we only have 2 VGPRs we
can use to hold data), making sure to mask the upper half of the wave
when handling when the LDS size is not a multiple of 512 bytes.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Co-authored-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In gfx950, the SQ_WAVE_LDS_ALLOC.LDS_SIZE field is extended to bits 12
to 22. The LDS_SIZE granularity remains unchanged (units of 64 dwords,
or 256 bytes). This patch adjusts the CWSR trap handler to read the
full extent of LDS_SIZE.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instruction modifiers of the untyped vector memory buffer instructions
(MUBUF encoded) changed in gfx940. The slc, scc and glc modifiers have
been replaced with sc0, sc1 and nt.
The current CWSR trap handler is written using pre-gfx940 modifier
names, making the source incompatible with a strict gfx940 assembler.
This patch updates the cwsr_trap_handler_gfx9.s source file to be
compatible with all gfx9 variants of the ISA. The binary assembled code
is unchanged (so the behaviour is unchanged as well), only the source
representation is updated.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There will to release the FW twice when the FW validated error.
Even if the release_firmware() will further validate the FW whether
is empty, but that will be redundant and inefficient.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function atomctrl_get_smc_sclk_range_table() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to
retrieve SMU_Info table, it returns NULL which is later dereferenced.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In practice this should never happen as this code only gets called
on polaris chips and the vbios data table will always be present on
those chips.
Fixes: a23eefa2f4 ("drm/amd/powerplay: enable dpm for baffin.")
Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debugfs entry to enable or disable job submission to
specific vcn instances. The entry is created only when
there is more than an instance and is unified queue type.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return eeprom table checksum error result, otherwise
it might be overwritten by next call.
V2: replace DRM_ERROR with dev_err
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When using a sw cursor and flip immediate, the plane that is flipping
immediately will do partial updates causing tearing.
When on certain displays, subvp is expected based on
timings but should be disabled in specific use cases that are not
accounted for.
[HOW]
This was fixed by improving the timings check by using the hw cursor
required flag to cover the unaccounted use cases.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Peterson <peterson.guo@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The existing changes to the DPMS off flag should help reduce
accidental entry, but this change further restricts the entry condition.
[How]
Record last power state as sent to DMUB.
Don't send IPS2 allow if it's D0.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Soft hang/lag observed during 10bit playback + moving cursor, corruption
observed in other tickets for same reason, also failing MPO.
1. Currently, we are always running
calculate_lowest_supported_state_for_temp_read which is only
necessary on dGPU
2. Fast validate path does not apply DET buffer allocation policy
3. Prefetch UrgBFactor chroma parameter not populated in prefetch
calculation
[HOW]
1. Add a check to see if we are on APU, if so, skip the code
2. Add det buffer alloc policy checks to fast validate path
3. Populate UrgentBurstChroma param in call to calculate
UrgBChroma prefetch values
-revision commits: small formatting/brackets/null check addition + remove test change + dGPU code
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add "restore" missing variable in the fucntions
sdma_v4_4_2_page_resume and sdma_v4_4_2_inst_start.
This fixes the warning:
warning: Function parameter or struct member 'restore' not described in 'sdma_v4_4_2_page_resume'
warning: Function parameter or struct member 'restore' not described in 'sdma_v4_4_2_inst_start'
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of fixing the warning for missing variable
its better to update the variable name to match
with the style followed in the code.
This will fix the below mentioned warning:
warning: Function parameter or struct member 'dbuf' not described in 'amdgpu_bo_create_isp_user'
warning: Excess function parameter 'dma_buf' description in 'amdgpu_bo_create_isp_user'
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All legacy RAS bad pages are generated in NPS1 mode, but new bad page
can be generated in any NPS mode, so we can't use retired_page stored
on eeprom directly in non-nps1 mode even for legacy data. We need to
take different actions for different data, new data can be identified
from old data by UMC_CHANNEL_IDX_V2 flag.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV, when host driver performs MODE 1 reset and notifies FLR to
guest driver, there is a small chance that there is no job running on hw
but the driver has not updated the pending list yet, causing the driver
not respond the FLR request. Modify the has_job_running function to
make sure if there is still running job.
v2: Use amdgpu_fence_count_emitted to determine job running status.
v3: Remove the timeout wait in has_job_running
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Shikang Fan <shikang.fan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Add hblank borrowing support
- Limit VTotal range to max hw cap minus fp
- Correct prefetch calculation
- Add option to retrieve detile buffer size
- Add support for custom recout_width in SPL
- Add disable_ips_in_dpms_off flag for IPS
- Enable EASF based on luma taps only
- Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add support for custom recout_width for mpc combine in SPL
[HOW]
1. Rename mpc_combine_h and mpc_combine_v
2. Add flag use_recout_width_aligned to use custom recout_width
3. Create union to use either mpc_num_h_slices or mpc_recout_width_align
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
