Although we have comments in intel_display_limits.h saying that the
code expects PIPE_A and TRANSCODER_A to be zero, it doesn't hurt to add
them as explicit base values for calculating the power domain offset in
POWER_DOMAIN_*() macros.
On the plus side, we have that this:
* Fixes a warning reported by kernel test robot <lkp@intel.com>
about doing arithmetic with two different enum types.
* Makes the code arguably more robust (in the unlikely event of those
bases becoming non-zero).
v2:
- Prefer using explicit base values instead of simply casting the
macro argument to int. (Ville)
- Update commit message to match the new approach (for reference, the
old message subject was "drm/i915/display: Use explicit cast in
POWER_DOMAIN_*() macros").
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502120809.XfmcqkBD-lkp@intel.com/
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-improve-type-safey-power-domain-macros-v3-1-b6eaa00f9c33@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Move intel_power_domains_{suspend,resume} to inside
intel_display_power_{suspend_late, resume_early}.
With this also change the VLV suspend failure to call
the intel_display_power_resume_early. In the end, the only
function executed there for VLV is the intel_power_domains_resume.
Besides make the code more consistency give the call that was
immediately before: intel_display_power_suspend_late.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113225016.208673-7-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add support for specifying a delay different than the current 100 ms
default for powering off a display power domain. This is needed by the
next patch which delays re-enabling DC states during modesets to avoid
the off->on->off toggling overhead of the DC_off power well, but does
this using a < 100 ms delay for a better utilization of DC power saving
states.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616185104.2502003-3-imre.deak@intel.com
There's only one reference to the struct intel_dmc members dc_state,
target_dc_state, and allowed_dc_mask within intel_dmc.c, begging the
question why they are under struct intel_dmc to begin with.
Moreover, the only references to i915->display.dmc outside of
intel_dmc.c are to these members.
They don't belong. Move them from struct intel_dmc to struct
i915_power_domains, which seems like a more suitable place.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-1-jani.nikula@intel.com
Starting with TGL eDP is supported on ports B+ (besides port A), so make
sure DC states are not blocked on any such ports. For this add an
AUX_IO_<port> power domain for each port with eDP support. These domains
similarly to AUX_IO_A enable only the AUX_IO_<port> power well for an
enabled port, whereas the existing AUX_<port> domains enable both the
AUX_IO_<port> and the DC_OFF power wells as required by DP AUX transfers.
v2: (Ville)
- Split the change using AUX vs. AUX_IO on port A to a separate patch.
- Select AUX_IO vs. AUX based on crtc_state->has_psr instead of
is_edp().
v3:
- Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr.
v4:
- Fix warn in intel_display_power_aux_io_domain(). (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-6-imre.deak@intel.com
The spec calls the XELPD_D/E ports just D/E, the platform prefix in the
domain names was only needed by the port->domain mapping relying on
matching enum values for the whole port/domain range (and the
corresponding aliasing between the platform specific domain enums).
Since a previous patch we can define the port->domain mapping explicitly
so do this by reusing the already existing D/E power domain names.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-18-imre.deak@intel.com
Aliasing the intel_display_power_domain enum values was required because
of the u64 power domain mask size limit. This makes the dmesg/debugfs
printouts of the domain names somewhat unclear, for instance domain
names for port D are shown on D12+ platforms where the corresponding
port is called TC1. Make this clearer by removing the aliasing which is
possible after a previous patch converting the mask to a bitmap.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-15-imre.deak@intel.com
Atm the port -> DDI and AUX power domain mapping is specified by relying
on the aliasing of the platform specific intel_display_power_domain enum
values. For instance D12+ platforms refer to the 'D' port and power
domain instances, which doesn't match the bspec terminology, on these
platforms the corresponding port is TC1. To make it clear what
port/domain the code refers to add a mapping between them which matches
the bspec terms on different display versions.
This also allows for removing the aliasing in enum values in a follow-up
patch.
v2: Add the functions to intel_display_power.c, use
intel_display_power_ prefix.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-14-imre.deak@intel.com
To remove the aliasing of the power domain enum values in a follow-up
patch in this patchset (requiring a bigger mask) and allow for defining
additional power domains in the future (at least some upcoming TypeC
changes requires this) convert the u64 i915_power_well_desc::domains
mask to a bitmap.
For simplicity I changed the for_each_power_domain_well() macros to
accept one domain only instead of a mask, as there isn't any current
user passing multiple domains.
v2: Don't add a typedef for the bitmap struct. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-9-imre.deak@intel.com
Move the implementation of platform specific power well hooks to
intel_display_power_well.c, to reduce the clutter in
intel_display_power.c.
The locking of all the power domain/power well state is handled in the
power domain functions in intel_display_power.c using
i915_power_domains::lock. This patch also moves the
chy_phy_powergate_ch/lanes() functions to intel_display_power_well.c
which borrow the same lock to protect the DISPLAY_PHY_CONTROL register
state, which the HW uses both for toggling power wells and power gating
PHY lanes.
No functional change.
v2:
- Clarify in the commit log why CHV functions using the
i915_power_domains::lock were moved, while others locking the power
domain/well state were kept in intel_display_power.c . (Jouni)
- Move forward declaration of chv_phy_powergate_ch/lanes() to
intel_display_power_well.h .
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-1-imre.deak@intel.com
The POWER_DOMAIN_TRANSCODER() macro depends on the
POWER_DOMAIN_TRANSCODER_A/B .. DSI_A/C enum values to be consecutive,
move POWER_DOMAIN_TRANSCODER_VDSC_PW2 after these to ensure this. The
wrong order didn't cause a problem, since the DSI_A/C domains are in
always-on power wells on all relevant platforms. The same power well
ends up being enabled/disabled when the VDSC_PW2 domain is selected
incorrectly.
While at it add a code comment about enum values that need to stay
consecutive.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-2-imre.deak@intel.com
Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.
We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.
There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
DG1 and XE_PLD platforms has Audio MMIO/VERBS lies in PG0 power
well. Adjusting the power domain accordingly to
POWER_DOMAIN_AUDIO_MMIO for audio detection and
POWER_DOMAIN_AUDIO_PLAYBACK for audio playback.
While doing this it requires to use POWER_DOMAIN_AUDIO_MMIO
power domain instead of POWER_DOMAIN_AUDIO in crtc power domain mask
and POWER_DOMAIN_AUDIO_PLAYBACK with intel_display_power_{get, put}
to enable/disable display audio codec power.
It will save the power in use cases when DP/HDMI connectors
configured with PIPE_A without any audio playback.
v1: Changes since RFC
- changed power domain names. [Imre]
- Removed TC{3,6}, AUX_USBC{3,6} and TBT from DG1
power well and PW_3 power domains. [Imre]
- Fixed the order of powe wells , power domains and its
registration. [Imre]
v2:
- Not allowe DC states when AUDIO_MMIO domain enabled. [Imre]
v3:
- Squashes the commits of series to avoid build failure.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
[Fix typo in commit message and in AUDIO_PLAYBACK domain name]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729121858.16897-2-anshuman.gupta@intel.com
DG2 extends our DDB to four DBuf slices; pipes A+B only have access to
the first two slices, whereas pipes C+D only have access to the second
two.
Confusingly, our bspec decided to switch from 1-based numbering
of dbuf slices (S1, S2) to 0-based numbering (S0, S1, S2, S3) in
Display13. At the moment we're using the 0-based number scheme for the
DBUF_CTL_S() register addressing, but the 1-based number scheme in the
actual slice assignment tables. We may want to consider switching the
assignment over to 0-based numbering too at some point...
Bspec: 49255
Bspec: 50057
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-16-matthew.d.roper@intel.com
Aside from the hardware-managed PG0, XE_LPD has power wells 1-2 and
A-D. These power wells should be enabled/disabled according to the
following dependency tree (enable top to bottom, disable bottom to top):
PG0
|
--PG1--
/ \
PGA --PG2--
/ | \
PGB PGC PGD
PWR_WELL_CTL follows the general ICL/TGL design and places PG A-D in the
bits that would have been PG 6-9 under the old scheme.
PWR_WELL_CTL_{DDI,AUX}'s bit indexing for DDI's A-C and TC1 is the same
as TGL, but DDI-D is placed at index 7 (bits 14 & 15).
v2:
- Squash in LPSP status patch from Uma since it's also a
powerwell-specific change.
Bspec: 49233
Bspec: 49503
Bspec: 49504
Bspec: 49505
Bspec: 49296
Bspec: 50090
Bspec: 53920
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512042144.2089071-4-matthew.d.roper@intel.com
In Bspec the TGL TypeC ports are TC1-6, the AUX power well request flags
are USBC1-6/TBT1-6, so for clarity use these names in the port power
domain names instead of the D-I terminology (which Bspec uses only for
the ICL TypeC ports).
A domain name should follow the <domain>_<pipe/transcoder/port/aux_ch>
format. Add the new aliases based on this, leaving a change to rename
all the rest accordingly for a follow-up.
No functional change.
v2: Add comment to commit log about unifying domain names. (Jose)
Cc: Souza Jose <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222210400.940158-1-imre.deak@intel.com
