Christian reports that 4K output using YUV420 encoding fails with the
following error:
Fatal Error, invalid HDMI vclk freq 593406
Modetest shows the following:
3840x2160 59.94 3840 4016 4104 4400 2160 2168 2178 2250 593407 flags: xxxx, xxxx,
drm calculated value -------------------------------------^
This indicates that there's a (1kHz) mismatch between the clock
calculated by the drm framework and the meson driver.
Relevant function call stack:
(drm framework)
-> meson_encoder_hdmi_atomic_enable()
-> meson_encoder_hdmi_set_vclk()
-> meson_vclk_setup()
The video clock requested by the drm framework is 593407kHz. This is
passed by meson_encoder_hdmi_atomic_enable() to
meson_encoder_hdmi_set_vclk() and the following formula is applied:
- the frequency is halved (which would be 296703.5kHz) and rounded down
to the next full integer, which is 296703kHz
- TMDS clock is calculated (296703kHz * 10)
- video encoder clock is calculated - this needs to match a table from
meson_vclk.c and so it doubles the previously halved value again
(resulting in 593406kHz)
- meson_vclk_setup() can't find (either directly, or by deriving it from
594000kHz * 1000 / 1001 and rounding to the closest integer value -
which is 593407kHz as originally requested by the drm framework) a
matching clock in it's internal table and errors out with "invalid
HDMI vclk freq"
Fix the division precision by switching the whole meson driver to use
unsigned long long (64-bit) Hz values for clock frequencies instead of
unsigned int (32-bit) kHz to fix the rouding error.
Fixes: e5fab2ec9c ("drm/meson: vclk: add support for YUV420 setup")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-3-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-3-martin.blumenstingl@googlemail.com
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
This implements the necessary change to no more use the embedded
connector in dw-hdmi and use the dedicated bridge connector driver
by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.
The necessary connector properties are added to handle the same
functionalities as the embedded dw-hdmi connector, i.e. the HDR
metadata, the CEC notifier & other flags.
The dw-hdmi output_port is set to 1 in order to look for a connector
next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-5-narmstrong@baylibre.com
This moves all the non-DW-HDMI code where it should be:
an encoder in the drm/meson core driver.
The bridge functions are copied as-is, except:
- the encoder init uses the simple kms helper
- the mode_set has been moved to atomic_enable()
- debug prints are converted to dev_debg()
For now the bridge attach flags is 0, DRM_BRIDGE_ATTACH_NO_CONNECTOR
will be handled later.
The meson dw-hdmi glue is slightly fixed to live without the
encoder in the same driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed warning because missing meson_encoder_hdmi.h include]
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-4-narmstrong@baylibre.com
