raspi/linux
1
0
Fork 1
mirror of https://github.com/raspberrypi/linux.git synced 2025-12-17 07:14:25 +00:00
Code Issues Projects Releases Wiki Activity
1,354,251 Commits 106 Branches 108 Tags
9cb15478916e849d62a6ec44b10c593b9663328c
Commit Graph

4397 Commits

Author SHA1 Message Date
Aleksandrs Vinarskis
5a0436e92a drm/msm/dp: Introduce link training per-segment for LTTPRs 
DisplayPort requires per-segment link training when LTTPR are switched
to non-transparent mode, starting with LTTPR closest to the source.
Only when each segment is trained individually, source can link train
to sink.

Implement per-segment link traning when LTTPR(s) are detected, to
support external docking stations. On higher level, changes are:

* Pass phy being trained down to all required helpers
* Run CR, EQ link training per phy
* Set voltage swing, pre-emphasis levels per phy

Since at least some LTTPRs (eg. Parade PS8830) do not correctly report
voltage-swing, pre-emphasis level 3 support, always assume level 3 is
supported. This is permitted under DP 2.1(a) section 3.6.7.2 stating
that LTTPR shall set its transmitter levels as close as possible to
those requested by the DPTX, if the DPTX sets the voltage swing or
pre-emphasis to a level that the LTTPR does not support. It shall be
noted that LTTPR’s level choosing is implementation-specific.

This ensures successful link training both when connected directly to
the monitor (single LTTPR onboard most X1E laptops) and via the docking
station (at least two LTTPRs).

Fixes: 72d0af4acc ("drm/msm/dp: Add support for LTTPR handling")
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/652305/
Link: https://lore.kernel.org/r/20250507230113.14270-5-alex.vinarskis@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:49 +03:00
Aleksandrs Vinarskis
7513ccb884 drm/msm/dp: Prepare for link training per-segment for LTTPRs 
Per-segment link training requires knowing the number of LTTPRs
(if any) present. Store the count during LTTPRs' initialization.

Fixes: 72d0af4acc ("drm/msm/dp: Add support for LTTPR handling")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/652306/
Link: https://lore.kernel.org/r/20250507230113.14270-4-alex.vinarskis@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:49 +03:00
Aleksandrs Vinarskis
c156fe2dd4 drm/msm/dp: Account for LTTPRs capabilities 
Take into account LTTPR capabilities when selecting maximum allowed
link rate, number of data lines.

Fixes: 72d0af4acc ("drm/msm/dp: Add support for LTTPR handling")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/652302/
Link: https://lore.kernel.org/r/20250507230113.14270-3-alex.vinarskis@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:49 +03:00
Aleksandrs Vinarskis
9351d3d302 drm/msm/dp: Fix support of LTTPR initialization 
Initialize LTTPR before msm_dp_panel_read_sink_caps, as DPTX shall
(re)read DPRX caps after LTTPR detection, as required by DP 2.1a,
Section 3.6.7.6.1.

Fixes: 72d0af4acc ("drm/msm/dp: Add support for LTTPR handling")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/652301/
Link: https://lore.kernel.org/r/20250507230113.14270-2-alex.vinarskis@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:49 +03:00
Dmitry Baryshkov
de01fc9fa1 drm/msm/dpu: remove DPU_CTL_SPLIT_DISPLAY from SAR2130P CTL blocks 
Follow the changes in the commit a2649952f6 ("drm/msm/dpu: remove
DPU_CTL_SPLIT_DISPLAY from CTL blocks on DPU >= 5.0") and remove
DPU_CTL_SPLIT_DISPLAY from the CTL blocks on the SAR2130P platform.
Single CTL is used for all interfaces used by a single path

Fixes: 1785751734 ("drm/msm/dpu: add catalog entry for SAR2130P")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/651883/
Link: https://lore.kernel.org/r/20250506-dpu-sar2130p-no-split-display-v1-1-b619c0fddea5@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:49 +03:00
Krzysztof Kozlowski
7520803bb9 drm/msm/dpu: Add handling of LM_6 and LM_7 bits in pending flush mask 
MDSS/MDP v12 comes with new bits in flush registers (e.g.
MDP_CTL_0_FLUSH) for Layer Mixer 6 and 7.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651260/
Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-13-8cab30c3e4df@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:49 +03:00
Krzysztof Kozlowski
a5539d0fbb drm/msm/dpu: Add LM_7, DSC_[67], PP_[67] and MERGE_3D_5 
Add IDs for new blocks present in MDSS/MDP v12 for LM, DSC, PINGPONG and
MERGE_3D blocks.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651262/
Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-12-8cab30c3e4df@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:49 +03:00
Krzysztof Kozlowski
b82dd6d258 drm/msm/dpu: Drop useless comments 
Drop comments about SoC before each 'struct dpu_lm_sub_blks' for given
SoC because it's duplicating the actual name of structure.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651251/
Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-11-8cab30c3e4df@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:49 +03:00
Krzysztof Kozlowski
2e162df9f6 drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE before blend setup 
Before blend setup, all existing blend stages are cleared, so shall be
active fetch pipes.

Fixes: b3652e87c0 ("drm/msm/disp/dpu1: add support to program fetch active in ctl path")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651263/
Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-10-8cab30c3e4df@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:49 +03:00
Krzysztof Kozlowski
3c072d50ae drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on ctl_path reset 
Resetting entire CTL path should also include resetting active fetch
pipes.

Fixes: e1a950eec2 ("drm/msm/dpu: add reset_intf_cfg operation for dpu_hw_ctl")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651252/
Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-9-8cab30c3e4df@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:49 +03:00
Krzysztof Kozlowski
164e00a9e6 drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on mixer reset 
Resetting mixers should also include resetting active fetch pipes.

Fixes: ae4d721ce1 ("drm/msm/dpu: add an API to reset the encoder related hw blocks")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651246/
Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-8-8cab30c3e4df@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Krzysztof Kozlowski
1d0a6c9e3b drm/msm/dpu: Add missing "fetch" name to set_active_pipes() 
The set_active_pipes() callback configures CTL_FETCH_PIPE_ACTIVE and
newer DPU v12.0 comes with CTL_PIPE_ACTIVE, thus rename it to
set_active_fetch_pipes() to better match the purpose.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651261/
Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-7-8cab30c3e4df@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
666832f7c2 drm/msm/hdmi: wire in hpd_enable/hpd_disable bridge ops 
The HDMI driver already has msm_hdmi_hpd_enable() and
msm_hdmi_hpd_disable() functions. Wire them into the
msm_hdmi_bridge_funcs, so that HPD  can be enabled and disabled
dynamically rather than always having HPD events generation enabled.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-13-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
b93f19d8d0 drm/msm/hdmi: ensure that HDMI is up if HPD is requested 
The HDMI block needs to be enabled to properly generate HPD events. Make
sure it is not turned off in the disable paths if HPD delivery is enabled.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651722/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-12-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
969bbbf7fb drm/msm/hdmi: expand the HDMI_CFG macro 
Expand the HDMI_CFG() macro in HDMI config description. It has no added
value other than hiding some boilerplate declarations.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651724/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-11-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
a7a1550d04 drm/msm/hdmi: rename hpd_clks to pwr_clks 
As these clocks are now used in the runtime PM callbacks, they have no
connection to 'HPD'. Rename corresponding fields to follow clocks
purpose, to power up the HDMI controller.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651720/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-10-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
0c5ec818cc drm/msm/hdmi: implement proper runtime PM handling 
It is completely not obvious, but the so-called 'hpd' clocks and
regulators are required for the HDMI host to function properly. Merge
pwr and hpd regulators. Use regulators, clocks and pinctrl to implement
proper runtime PM callbacks.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651715/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-9-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
531b4e2c20 drm/msm/hdmi: add runtime PM calls to DDC transfer function 
We must be sure that the HDMI controller is powered on, while performing
the DDC transfer. Add corresponding runtime PM calls to
msm_hdmi_i2c_xfer().

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651727/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-8-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
81aa834197 drm/msm/hdmi: switch to pm_runtime_resume_and_get() 
The pm_runtime_get_sync() function is a bad choise for runtime power
management. Switch HDMI driver to pm_runtime_resume_and_get() and add
proper error handling, while we are at it.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651713/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-7-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
15a5223dc6 drm/msm/hdmi: switch to clk_bulk API 
The last platform using legacy clock names for HDMI block (APQ8064)
switched to new clock names in 5.16. It's time to stop caring about old
DT, drop hand-coded helpers and switch to clk_bulk_* API.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651716/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-6-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
a6984a3f9a drm/msm/hdmi: drop clock frequency assignment 
The only clock which has frequency being set through hpd_freqs is the
"core" aka MDSS_HDMI_CLK clock. It always has the specified frequency,
so we can drop corresponding clk_set_rate() call together with the
hpd_freq infrastructure.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651717/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-5-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
7e53b0a98f drm/msm/hdmi: simplify extp clock handling 
With the extp being the only "power" clock left, remove the surrounding
loops and handle the extp clock directly.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651710/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-4-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
e300f26b7e drm/msm/hdmi: move the alt_iface clock to the hpd list 
According to the vendor kernel [1] , the alt_iface clock should be
enabled together with the rest of HPD clocks, to make HPD to work
properly.

[1] e07a5487e5

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651709/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-3-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Dmitry Baryshkov
72dff0b04e drm/msm/hdmi: convert clock and regulator arrays to const arrays 
As a preparation to the next patches convert 'static const char *'
arrays to 'static const char * const', as required by the checkpatch.pl

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/651705/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-2-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-12 19:18:48 +03:00
Rob Clark
8f5264d302 drm/msm/adreno: Remove MODULE_FIRMWARE()'s 
The driver handles the case where gpu fw is not in the initrd.  OTOH it
doesn't always handle the case where _some_ fw is in the initrd, but
others are not.  In particular the zap fw tends to be signed with an OEM
specific key, so the paths/names differ across devices with the same
SoC/GPU, so we cannot sanely list them with MODULE_FIRMWARE().

So MODULE_FIRMWARE() just ends up causing problems without actually
solving anything.  Remove them!

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/652195/
 2025-05-10 09:06:36 -07:00
Konrad Dybcio
5a9c1bea01 drm/msm/a6xx: Disable rgb565_predicator on Adreno 7c3 
This feature is supposed to be enabled with UBWC v4 or later.
Implementations of this SKU feature an effective UBWC version of 3, so
disable it, in line with the BSP kernel.

Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Fixes: 192f4ee3e4 ("drm/msm/a6xx: Add support for Adreno 7c Gen 3 gpu")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/651759/
Signed-off-by: Rob Clark <robdclark@chromium.org>
 2025-05-10 09:05:20 -07:00
Akhil P Oommen
19c17841e3 drm/msm/adreno: Add module param to disable ACD 
Add a module param to disable ACD which will help to quickly rule it
out for any GPU issues.

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/649349/
Signed-off-by: Rob Clark <robdclark@chromium.org>
 2025-05-04 09:20:29 -07:00
Akhil P Oommen
8e98a81da2 drm/msm: a6x: Rework qmp_get() error handling 
Fix the following for qmp_get() errors:

1. Correctly handle probe defer for A6x GPUs
2. Ignore other errors because those are okay when GPU ACD is
not required. They are checked again during gpu acd probe.

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Patchwork: https://patchwork.freedesktop.org/patch/649346/
Signed-off-by: Rob Clark <robdclark@chromium.org>
 2025-05-04 09:20:29 -07:00
Akhil P Oommen
5f02f5e78e drm/msm/a6xx: Increase HFI response timeout 
When ACD feature is enabled, it triggers some internal calibrations
which result in a pretty long delay during the first HFI perf vote.
So, increase the HFI response timeout to match the downstream driver.

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Patchwork: https://patchwork.freedesktop.org/patch/649344/
Signed-off-by: Rob Clark <robdclark@chromium.org>
 2025-05-04 09:20:29 -07:00
Akhil P Oommen
b733fe7bff drm/msm/adreno: Add support for ACD 
ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce
the power consumption. In some chipsets, it is also a requirement to
support higher GPU frequencies. This patch adds support for GPU ACD by
sending necessary data to GMU and AOSS. The feature support for the
chipset is detected based on devicetree data.

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/649342/
Signed-off-by: Rob Clark <robdclark@chromium.org>
 2025-05-04 09:20:28 -07:00
Rob Clark
dda72ac390 drm/msm/adreno: Drop fictional address_space_size 
Really the only purpose of this was to limit the address space size to
4GB to avoid 32b rollover problems in 64b pointer math in older sqe fw.
So replace the address_space_size with a quirk limiting the address
space to 4GB.  In all other cases, use the SMMU input address size (IAS)
to determine the address space size.

v2: Properly account for vm_start

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/649467/
 2025-05-04 09:20:28 -07:00
Connor Abbott
c0134808a9 drm/msm: Be more robust when HFI response times out 
If the GMU takes too long to respond to an HFI message, we may return
early. If the GMU does eventually respond, and then we send a second
message, we will see the response for the first, throw another error,
and keep going. But we don't currently wait for the interrupt from the
GMU again, so if the second response isn't there immediately we may
prematurely return. This can cause a continuous cycle of missed HFI
messages, and for reasons I don't quite understand the GMU does not shut
down properly when this happens.

Fix this by waiting for the GMU interrupt when we see an empty queue. If
the GMU never responds then the queue really is empty and we quit. We
can't wait for the interrupt when we see a wrong response seqnum because
the GMU might have already queued both responses by the time we clear
the interrupt the first time so we do need to check the queue before
waiting on the interrupt again.

Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650013/
Signed-off-by: Rob Clark <robdclark@chromium.org>
 2025-05-04 09:20:28 -07:00
Stephan Gerhold
b71717735b drm/msm/gpu: Fix crash when throttling GPU immediately during boot 
There is a small chance that the GPU is already hot during boot. In that
case, the call to of_devfreq_cooling_register() will immediately try to
apply devfreq cooling, as seen in the following crash:

  Unable to handle kernel paging request at virtual address 0000000000014110
  pc : a6xx_gpu_busy+0x1c/0x58 [msm]
  lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm]
  Call trace:
   a6xx_gpu_busy+0x1c/0x58 [msm] (P)
   devfreq_simple_ondemand_func+0x3c/0x150
   devfreq_update_target+0x44/0xd8
   qos_max_notifier_call+0x30/0x84
   blocking_notifier_call_chain+0x6c/0xa0
   pm_qos_update_target+0xd0/0x110
   freq_qos_apply+0x3c/0x74
   apply_constraint+0x88/0x148
   __dev_pm_qos_update_request+0x7c/0xcc
   dev_pm_qos_update_request+0x38/0x5c
   devfreq_cooling_set_cur_state+0x98/0xf0
   __thermal_cdev_update+0x64/0xb4
   thermal_cdev_update+0x4c/0x58
   step_wise_manage+0x1f0/0x318
   __thermal_zone_device_update+0x278/0x424
   __thermal_cooling_device_register+0x2bc/0x308
   thermal_of_cooling_device_register+0x10/0x1c
   of_devfreq_cooling_register_power+0x240/0x2bc
   of_devfreq_cooling_register+0x14/0x20
   msm_devfreq_init+0xc4/0x1a0 [msm]
   msm_gpu_init+0x304/0x574 [msm]
   adreno_gpu_init+0x1c4/0x2e0 [msm]
   a6xx_gpu_init+0x5c8/0x9c8 [msm]
   adreno_bind+0x2a8/0x33c [msm]
   ...

At this point we haven't initialized the GMU at all yet, so we cannot read
the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before
in commit 6694482a70 ("drm/msm: Avoid unclocked GMU register access in
6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but
unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag
accordingly. This means the df->suspended flag does not match the actual
devfreq state after initialization and msm_devfreq_get_dev_status() will
end up accessing GMU registers, causing the crash.

Fix this by setting df->suspended correctly during initialization.

Cc: stable@vger.kernel.org
Fixes: 6694482a70 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650772/
Signed-off-by: Rob Clark <robdclark@chromium.org>
 2025-05-04 09:20:28 -07:00
Ayushi Makhija
249a965c37 drm/msm/dsi: add DSI support for SA8775P 
Add DSI Controller v2.5.1 support for SA8775P SoC.

Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/651433/
Link: https://lore.kernel.org/r/20250424062431.2040692-6-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 03:54:03 +03:00
Ayushi Makhija
d3979192fa drm/msm/dsi: add DSI PHY configuration on SA8775P 
The SA8775P SoC uses the 5nm (v4.2) DSI PHY driver with
different enable regulator load.

Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/649842/
Link: https://lore.kernel.org/r/20250424062431.2040692-5-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
98a8920e7b drm/msm/dp: reuse generic HDMI codec implementation 
The MSM DisplayPort driver implements several HDMI codec functions
in the driver, e.g. it manually manages HDMI codec device registration,
returning ELD and plugged_cb support. In order to reduce code
duplication reuse drm_hdmi_audio_* helpers and drm_bridge_connector
integration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/649728/
Link: https://lore.kernel.org/r/20250423-dp-hdmi-audio-v7-1-8407a23e55b2@oss.qualcomm.com
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
075667e986 drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630 
The SDM630 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask, replacing PINGPONG_SDM845_MASK with
BIT(DPU_PINGPONG_DITHER).

Fixes: 7204df5e7e ("drm/msm/dpu: add support for SDM660 and SDM630 platforms")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/640308/
Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-5-498271be8b50@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
e1fbb0d78e drm/msm/dpu: drop TE2 definitions 
Neither DPU driver nor vendor SDE driver do not use TE2 definitions
(and, in case of SDE driver, never did). Semantics of the TE2 feature
bit and .te2 sblk are not completely clear. Drop these bits from the
catalog with the possibility of reintroducing them later if we need to
support ppsplit.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/640305/
Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-4-498271be8b50@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
5232a29ebc drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953 
The MSM8953 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask and, as it is the only remaining bit,
drop the .features assignment completely.

Fixes: 7a6109ce1c ("drm/msm/dpu: Add support for MSM8953")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/640303/
Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-3-498271be8b50@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
5be9812011 drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917 
The MSM8917 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask and, as it is the only remaining bit,
drop the .features assignment completely.

Fixes: 62af6e1cb5 ("drm/msm/dpu: Add support for MSM8917")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/640301/
Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-2-498271be8b50@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
b43c524134 drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937 
The MSM8937 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask and, as it is the only remaining bit,
drop the .features assignment completely.

Fixes: c079680bb0 ("drm/msm/dpu: Add support for MSM8937")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/640299/
Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-1-498271be8b50@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
88321e3529 drm/msm/hdmi: use new helper for ACR tables 
Use new drm_hdmi_acr_get_n_cts() helper instead of hand-coding the
tables. Instead of storing the rate 'index', store the audio sample rate
in hdmi->audio.rate, removing the need for even more defines.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/647507/
Link: https://lore.kernel.org/r/20250408-drm-hdmi-acr-v2-3-dee7298ab1af@oss.qualcomm.com
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
1735917ac4 drm/msm/hdmi: move msm_hdmi_audio_update() out of msm_hdmi_set_timings() 
There is a duplication between msm_hdmi_audio_update() calls in
msm_hdmi_set_timings() and msm_hdmi_bridge_atomic_pre_enable(). Merge
those two calls to be performed unconditionally at
msm_hdmi_bridge_atomic_pre_enable().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/647505/
Link: https://lore.kernel.org/r/20250408-drm-hdmi-acr-v2-2-dee7298ab1af@oss.qualcomm.com
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
1785751734 drm/msm/dpu: add catalog entry for SAR2130P 
Add DPU driver support for the Qualcomm SAR2130P platform. It is mostly
the same as SM8550, minor differences in the CDP configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/649258/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-8-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
8e63b2075e drm/msm/dsi/phy: add configuration for SAR2130P 
Qualcomm SAR2130P requires slightly different setup for the DSI PHY. It
is a 5nm PHY (like SM8450), so supplies are the same, but the rest of
the configuration is the same as SM8550 DSI PHY.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/649257/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-7-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
1e7cbfea66 drm/msm/mdss: add SAR2130P device configuration 
Add compatible and device configuration for the Qualcomm SAR2130P
platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/649256/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-6-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 03:54:03 +03:00
Dmitry Baryshkov
79af56964e drm/msm/dpu: rename non-SmartDMA feature masks to be more explicit 
It is easy to skip or ignore the fact that the default SSPP feature
masks for SDM845+ don't include the SmartDMA bit (both during
development and during the review stage). Rename SSPP feature masks to
make it more explicit that using non-SmartDMA masks should not be an
exception rather than the rule.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/650425/
Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-5-c71900687d08@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 01:14:27 +03:00
Dmitry Baryshkov
3f5e910b33 drm/msm/dpu: enable SmartDMA on SM8550 
In order to support more versatile configuration of the display pipes on
SM8550, enable SmartDMA for this platform.

Patchwork: https://patchwork.freedesktop.org/patch/650424/
Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-4-c71900687d08@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 01:14:27 +03:00
Dmitry Baryshkov
63958b80c2 drm/msm/dpu: enable SmartDMA on SC8280XP 
In order to support more versatile configuration of the display pipes on
SC8280XP, enable SmartDMA for this platform.

Patchwork: https://patchwork.freedesktop.org/patch/650420/
Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-3-c71900687d08@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 01:14:27 +03:00
Dmitry Baryshkov
8dcccd7a15 drm/msm/dpu: enable SmartDMA on SC8180X 
Reworking of the catalog dropped the SmartDMA feature bit on the SC8180X
platform. Renable SmartDMA support on this SoC.

Fixes: 460c410f02 ("drm/msm/dpu: duplicate sdm845 catalog entries")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/650421/
Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-2-c71900687d08@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-02 01:14:27 +03:00