The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case an upstream bridge modified the required clock frequency
in its .atomic_check callback by setting adjusted_mode.clock ,
make sure that clock frequency is generated by the LCDIFv3 block.
This is useful e.g. when LCDIFv3 feeds DSIM which feeds TC358767
with (e)DP output, where the TC358767 expects precise timing on
its input side, the precise timing must be generated by the LCDIF.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531202813.277109-1-marex@denx.de
In case the LCDIF is enabled in DT but unused, the clocks used by the
LCDIF are not enabled. Those clocks may even have a use count of 0 in
case there are no other users of those clocks. This can happen e.g. in
case the LCDIF drives HDMI bridge which has no panel plugged into the
HDMI connector.
Do not attempt to disable clocks in the suspend callback and re-enable
clocks in the resume callback unless the LCDIF is enabled and was in
use before the system entered suspend, otherwise the driver might end
up trying to disable clocks which are already disabled with use count
0, and would trigger a warning from clock core about this condition.
Note that the lcdif_rpm_suspend() and lcdif_rpm_resume() functions
internally perform the clocks disable and enable operations and act
as runtime PM hooks too.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Fixes: 9db35bb349 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226082644.32603-1-marex@denx.de
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the mxsfb driver from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-33-u.kleine-koenig@pengutronix.de
In case the LCDIFv3 is used to drive a 4k panel via i.MX8MP HDMI bridge,
the LCDIFv3 becomes susceptible to FIFO underflows, these lead to nasty
flicker of the image on the panel, or image being shifted by half frame
horizontally every second frame. The flicker can be easily triggered by
running 3D application on top of weston compositor, like neverball or
chromium. Surprisingly glmark2-es2-wayland or glmark2-es2-drm does not
trigger this effect so easily.
Configure the FIFO Panic threshold register and enable the FIFO Panic
mode, which internally boosts the NoC interconnect priority for LCDIFv3
transactions in case of possible underflow. This mitigates the flicker
effect on 4k panels as well.
Fixes: 9db35bb349 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8mp EVK
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101152629.21768-1-marex@denx.de
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.
v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
Up to and including v1.3, HDMI supported limited quantization range only
for YCbCr. HDMI v1.4 introduced selectable quantization ranges, but this
feature isn't supported in the dw-hdmi driver that is used in
conjunction with the LCDIF in the i.MX8MP. The HDMI YCbCr output is thus
always advertised in the AVI infoframe as limited range.
The LCDIF driver, on the other hand, configures the CSC to produce full
range YCbCr. This mismatch results in loss of details and incorrect
colours. Fix it by switching to limited range YCbCr.
The coefficients are copied from drivers/media/platforms/nxp/imx-pxp.c
for coherency, as the hardware is most likely identical.
Fixes: 9db35bb349 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930083955.31580-4-laurent.pinchart@ideasonboard.com
The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the platform,
it can also be a bus address or a virtual address managed by an IOMMU.
Hence, rename the field to dma_addr, which is more applicable.
In order to do this renaming the following coccinelle script was used:
```
@@
struct drm_gem_dma_object *gem;
@@
- gem->paddr
+ gem->dma_addr
@@
struct drm_gem_dma_object gem;
@@
- gem.paddr
+ gem.dma_addr
@exists@
typedef dma_addr_t;
symbol paddr;
@@
dma_addr_t paddr;
<...
- paddr
+ dma_addr
...>
@@
symbol paddr;
@@
dma_addr_t
- paddr
+ dma_addr
;
```
This patch is compile-time tested with:
```
make ARCH={x86_64,arm,arm64} allyesconfig
make ARCH={x86_64,arm,arm64} drivers/gpu/drm`
```
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.
Besides that, commit e57924d4ae ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".
Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.
Besides that, commit e57924d4ae ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
The LCDIF controller as present in i.MX28/i.MX6SX/i.MX8M Mini/Nano has
CRC_STAT register, which contains CRC32 of the frame as it was clocked
out of the DPI interface of the LCDIF. This is most likely meant as a
functional safety feature.
Unfortunately, there is zero documentation on how the CRC32 is calculated,
there is no documentation of the polynomial, the init value, nor on which
data is the checksum applied.
By applying brute-force on 8 pixel / 2 line frame, which is the minimum
size LCDIF would work with, it turns out the polynomial is CRC32_POLY_LE
0xedb88320 , init value is 0xffffffff , the input data are bitrev32()
of the entire frame and the resulting CRC has to be also bitrev32()ed.
Doing this calculation in kernel for each frame is unrealistic due to the
CPU demand, so attach the CRC collected from hardware to a frame instead.
The DRM subsystem already has an interface for this purpose and the CRC
can be accessed e.g. via debugfs:
"
$ echo auto > /sys/kernel/debug/dri/1/crtc-0/crc/control
$ cat /sys/kernel/debug/dri/1/crtc-0/crc/data
0x0000408c 0xa4e5cdd8
0x0000408d 0x72f537b4
"
The per-frame CRC can be used by userspace e.g. during automated testing,
to verify that whatever buffer was sent to be scanned out was actually
scanned out of the LCDIF correctly.
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429212313.305556-1-marex@denx.de
