To make sure that we don't unintentionally perform any unclocked and/or
unpowered R/W operation on GPU registers, before turning off clocks and
regulators we must make sure that no GPU, JOB or MMU ISR execution is
pending: doing that requires to add a mechanism to synchronize the
interrupts on suspend.
Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform
interrupts masking and ISR execution synchronization, and then call
those in the panfrost_device_runtime_suspend() handler in the exact
sequence of job (may require mmu!) -> mmu -> gpu.
As a side note, JOB and MMU suspend_irq functions needed some special
treatment: as their interrupt handlers will unmask interrupts, it was
necessary to add an `is_suspended` bitmap which is used to address the
possible corner case of unintentional IRQ unmasking because of ISR
execution after a call to synchronize_irq().
At resume, clear each is_suspended bit in the reset path of JOB/MMU
to allow unmasking the interrupts.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-4-angelogioacchino.delregno@collabora.com
Currently, the GPU is being internally powered off for runtime suspend
and turned back on for runtime resume through commands sent to it, but
note that the GPU doesn't need to be clocked during the poweroff state,
hence it is possible to save some power on selected platforms.
Add suspend and resume handlers for full system sleep and then add
a new panfrost_gpu_pm enumeration and a pm_features variable in the
panfrost_compatible structure: BIT(GPU_PM_CLK_DIS) will be used to
enable this power saving technique only on SoCs that are able to
safely use it.
Note that this was implemented only for the system sleep case and not
for runtime PM because testing on one of my MediaTek platforms showed
issues when turning on and off clocks aggressively (in PM runtime)
resulting in a full system lockup.
Doing this only for full system sleep never showed issues during my
testing by suspending and resuming the system continuously for more
than 100 cycles.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109102543.42971-4-angelogioacchino.delregno@collabora.com
The drm-stats fdinfo tags made available to user space are drm-engine,
drm-cycles, drm-max-freq and drm-curfreq, one per job slot.
This deviates from standard practice in other DRM drivers, where a single
set of key:value pairs is provided for the whole render engine. However,
Panfrost has separate queues for fragment and vertex/tiler jobs, so a
decision was made to calculate bus cycles and workload times separately.
Maximum operating frequency is calculated at devfreq initialisation time.
Current frequency is made available to user space because nvtop uses it
when performing engine usage calculations.
It is important to bear in mind that both GPU cycle and kernel time numbers
provided are at best rough estimations, and always reported in excess from
the actual figure because of two reasons:
- Excess time because of the delay between the end of a job processing,
the subsequent job IRQ and the actual time of the sample.
- Time spent in the engine queue waiting for the GPU to pick up the next
job.
To avoid race conditions during enablement/disabling, a reference counting
mechanism was introduced, and a job flag that tells us whether a given job
increased the refcount. This is necessary, because user space can toggle
cycle counting through a debugfs file, and a given job might have been in
flight by the time cycle counting was disabled.
The main goal of the debugfs cycle counter knob is letting tools like nvtop
or IGT's gputop switch it at any time, to avoid power waste in case no
engine usage measuring is necessary.
Also add a documentation file explaining the possible values for fdinfo's
engine keystrings and Panfrost-specific drm-curfreq-<keystr> pairs.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929181616.2769345-3-adrian.larumbe@collabora.com
Use the EXPORT_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr() macros to handle
the PM callbacks.
These macros allow the PM functions to be automatically dropped by the
compiler when CONFIG_PM is disabled, without having to use #ifdef
guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-3-paul@crapouillou.net
We've fixed many races in panfrost_job_timedout() but some remain.
Instead of trying to fix it again, let's simplify the logic and move
the reset bits to a separate work scheduled when one of the queue
reports a timeout.
v5:
- Simplify panfrost_scheduler_stop() (Steven Price)
- Always restart the queue in panfrost_scheduler_start() even if
the status is corrupted (Steven Price)
v4:
- Rework the logic to prevent a race between drm_sched_start()
(reset work) and drm_sched_job_timedout() (timeout work)
- Drop Steven's R-b
- Add dma_fence annotation to the panfrost_reset() function (Daniel Vetter)
v3:
- Replace the atomic_cmpxchg() by an atomic_xchg() (Robin Murphy)
- Add Steven's R-b
v2:
- Use atomic_cmpxchg() to conditionally schedule the reset work
(Steven Price)
Fixes: 1a11a88cfd ("drm/panfrost: Fix job timeout handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105151704.2010667-1-boris.brezillon@collabora.com
The panfrost driver requests a supply using regulator_get_optional()
but both the name of the supply and the usage pattern suggest that it is
being used for the main power for the device and is not at all optional
for the device for function, there is no meaningful handling for absent
supplies. Such regulators should use the vanilla regulator_get()
interface, it will ensure that even if a supply is not described in the
system integration one will be provided in software.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904123032.23263-1-broonie@kernel.org
There's a few issues with the runtime PM initialization.
The documentation states pm_runtime_set_active() should be called before
pm_runtime_enable(). The pm_runtime_put_autosuspend() could suspend the GPU
before panfrost_perfcnt_init() is called which touches the h/w. The
autosuspend delay keeps things from breaking. There's no need explicitly
power off the GPU only to wake back up with pm_runtime_get_sync(). Just
delaying pm_runtime_enable to the end of probe is sufficient.
Lets move all the runtime PM calls into the probe() function so they are
all in one place and are done after all initialization.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826223317.28509-2-robh@kernel.org
Up until now, a single shared GPU address space was used. This is not
ideal as there's no protection between processes and doesn't work for
supporting the same GPU/CPU VA feature. Most importantly, this will
hopefully mitigate Alyssa's fear of WebGL, whatever that is.
Most of the changes here are moving struct drm_mm and struct
panfrost_mmu objects from the per device struct to the per FD struct.
The critical function is panfrost_mmu_as_get() which handles allocating
and switching the h/w address spaces.
There's 3 states an AS can be in: free, allocated, and in use. When a
job runs, it requests an address space and then marks it not in use when
job is complete(but stays assigned). The first time thru, we find a free
AS in the alloc_mask and assign the AS to the FD. Then the next time
thru, we most likely already have our AS and we just mark it in use with
a ref count. We need a ref count because we have multiple job slots. If
the job/FD doesn't have an AS assigned and there are no free ones, then
we pick an allocated one not in use from our LRU list and switch the AS
from the old FD to the new one.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813150115.30338-1-robh@kernel.org
Expose performance counters through 2 driver specific ioctls: one to
enable/disable the perfcnt block, and one to dump the counter values.
There are discussions to expose global performance monitors (those
counters that can't be retrieved on a per-job basis) in a consistent
way, but this is likely to take time to settle on something that works
for various HW/users.
The ioctls are marked unstable so we can get rid of them when the time
comes. We initally went for a debugfs-based interface, but this was
making the transition to per-FD address space more complicated (we need
to specify the namespace the GPU has to use when dumping the perf
counters), hence the decision to switch back to driver specific ioctls
which are passed the FD they operate on and thus will have a dedicated
address space attached to them.
Other than that, the implementation is pretty simple: it basically dumps
all counters and copy the values to a userspace buffer. The parsing is
left to userspace which has to know the specific layout that's used
by the GPU (layout differs on a per-revision basis).
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081648.17297-5-boris.brezillon@collabora.com
This adds the initial driver for panfrost which supports Arm Mali
Midgard and Bifrost family of GPUs. Currently, only the T860 and
T760 Midgard GPUs have been tested.
v2:
- Add GPU reset on job hangs (Tomeu)
- Add RuntimePM and devfreq support (Tomeu)
- Fix T760 support (Tomeu)
- Add a TODO file (Rob, Tomeu)
- Support multiple in fences (Tomeu)
- Drop support for shared fences (Tomeu)
- Fill in MMU de-init (Rob)
- Move register definitions back to single header (Rob)
- Clean-up hardcoded job submit todos (Rob)
- Implement feature setup based on features/issues (Rob)
- Add remaining Midgard DT compatible strings (Rob)
v3:
- Add support for reset lines (Neil)
- Add a MAINTAINERS entry (Rob)
- Call dma_set_mask_and_coherent (Rob)
- Do MMU invalidate on map and unmap. Restructure to do a single
operation per map/unmap call. (Rob)
- Add a missing explicit padding to struct drm_panfrost_create_bo (Rob)
- Fix 0-day error: "panfrost_devfreq.c:151:9-16: ERROR: PTR_ERR applied after initialization to constant on line 150"
- Drop HW_FEATURE_AARCH64_MMU conditional (Rob)
- s/DRM_PANFROST_PARAM_GPU_ID/DRM_PANFROST_PARAM_GPU_PROD_ID/ (Rob)
- Check drm_gem_shmem_prime_import_sg_table() error code (Rob)
- Re-order power on sequence (Rob)
- Move panfrost_acquire_object_fences() before scheduling job (Rob)
- Add NULL checks on array pointers in job clean-up (Rob)
- Rework devfreq (Tomeu)
- Fix devfreq init with no regulator (Rob)
- Various WS and comments clean-up (Rob)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-4-robh@kernel.org
