In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct vkms_plane_state **", but the returned type
will be "struct drm_plane **". These are the same size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Fixes: 8b18658736 ("drm/vkms: totally reworked crc data tracking")
Link: https://lore.kernel.org/r/20250426061431.work.304-kees@kernel.org
Signed-off-by: Louis Chauvet <contact@louischauvet.fr>
The workqueue used for the reset worker is marked as WQ_MEM_RECLAIM,
while the GSC one isn't (and can't be as we need to do memory
allocations in the gsc worker). Therefore, we can't flush the latter
from the former.
The reason why we had such a flush was to avoid interrupting either
the GSC FW load or in progress GSC proxy operations. GSC proxy
operations fall into 2 categories:
1) GSC proxy init: this only happens once immediately after GSC FW load
and does not support being interrupted. The only way to recover from
an interruption of the proxy init is to do an FLR and re-load the GSC.
2) GSC proxy request: this can happen in response to a request that
the driver sends to the GSC. If this is interrupted, the GSC FW will
timeout and the driver request will be failed, but overall the GSC
will keep working fine.
Flushing the work allowed us to avoid interruption in both cases (unless
the hang came from the GSC engine itself, in which case we're toast
anyway). However, a failure on a proxy request is tolerable if we're in
a scenario where we're triggering a GT reset (i.e., something is already
gone pretty wrong), so what we really need to avoid is interrupting
the init flow, which we can do by polling on the register that reports
when the proxy init is complete (as that ensure us that all the load and
init operations have been completed).
Note that during suspend we still want to do a flush of the worker to
make sure it completes any operations involving the HW before the power
is cut.
v2: fix spelling in commit msg, rename waiter function (Julia)
Fixes: dd0e89e5ed ("drm/xe/gsc: GSC FW load")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4830
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://lore.kernel.org/r/20250502155104.2201469-1-daniele.ceraolospurio@intel.com
Keep only the latest fences to reduce the number of values
given back to userspace
v2: - Export this code from dma-fence-unwrap.c(by Christian).
v3: - To split this in a dma_buf patch and amd userq patch(by Sunil).
- No need to add a new function just re-use existing(by Christian).
v4: Export dma_fence_dedub_array function and used it(by Christian).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_file will be used in usermode queues code to
enable better process information in logging and hence
add drm_file part of the userq_mgr struct.
update the drm_file pointer in userq_mgr for each
amdgpu_driver_open_kms.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a drm helper function which appends the process information for
the drm_file over drm_err formatted output.
v5: change to macro from function (Christian Koenig)
add helper functions for lock/unlock (Christian Koenig)
v6: remove __maybe_unused and make function inline (Jani Nikula)
remove drm_print.h
v7: Use va_format and %pV to concatenate fmt and vargs (Jani Nikula)
v8: Code formatting and typos (Ursulin tvrtko)
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary
* Remove redundant NULL check
* Fix invalid context error in dml helper
* Prepare for Fused I2C-over-AUX
* Allow DSCClock disable
* Vmax / Vmin update for Vsync
* Fix race condition in DPIA AUX transfer
* Fix wrong handling for AUX_DEFER case
* Only wait for required space in DMUB mailbox
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For dpia, preferred engine instance availability is not checked
when assigning stream encoder instance.
[How]
Check for dpia preferred engine id and assign the same stream
encoder instance for the stream if available.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We incorrectly ack all bytes get written when the reply actually is defer.
When it's defer, means sink is not ready for the request. We should
retry the request.
[How]
Only reply all data get written when receive I2C_ACK|AUX_ACK. Otherwise,
reply the number of actual written bytes received from the sink.
Add some messages to facilitate debugging as well.
Fixes: ad6756b4d7 ("drm/amd/display: Shift dc link aux to aux_payload")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_dm_process_dmub_aux_transfer_sync() should return all exact data
reply from the sink side. Don't do the analysis job in it.
[How]
Remove unnecessary check condition AUX_TRANSACTION_REPLY_AUX_ACK.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
"Request length != reply length" is expected behavior defined in spec.
It's not an invalid reply. Besides, replied data handling logic is not
designed to be written in amdgpu_dm_process_dmub_aux_transfer_sync().
Remove the incorrectly handling section.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Defined value of dmub AUX reply command field get updated but didn't
adjust dm receiving side accordingly.
[How]
Check the received reply command value to see if it's updated version
or not. Adjust it if necessary.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There are several gaps that can result in SubVP being enabled with
incompatible HW cursor sizes, and unjust restrictions to cursor size due
to wrong predictions on future usage of SubVP.
[HOW]
- remove "prediction" logic in favor of tagging based on previous SubVP
usage
- block SubVP if current HW cursor settings are incompatible
- provide interface for DM to determine if HW cursor should be disabled
due to an attempt to enable SubVP
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Memory allocation occurs within dml21_validate() for adding phantom planes.
May cause kernel to be tainted due to usage of FP Start.
[How]
Move FP start from dml21_validate to before mode programming/mode support.
Calculations requiring floating point are all done within mode programming
or mode support.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Remove the unnecessary DC_FP_START/DC_FP_END pair to reduce time in
preempt_disable. It also fixes "BUG: sleeping function called from
invalid context" error messages because of calling kzalloc with
GFP_KERNEL which can sleep.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FAMS2 expects vmin/vmax to be updated in the case when freesync is
off, but supported. But we only update it when freesync is enabled.
[How]
Change the vsync handler such that dc_stream_adjust_vmin_vmax() its called
irrespective of whether freesync is enabled. If freesync is supported,
then there is no harm in updating vmin/vmax registers.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
when dscclk rcg disabled from usr reg option,
dsc clock will remain enabled because driver was doing two things
both dscclk and dsc rcg in the same routine.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Passive DP-HDMI dongles use I2C-over-AUX protocol which is currently
not supported using HDCP Locality Check FW path.
[How]
Prepare code for switching to I2C-over-AUX protocol. Passive dongle
detection to be added in another commit.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
"BUG: sleeping function called from invalid context" error.
after:
"drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()"
The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag
for memory allocation, which shouldn't be used in atomic contexts.
The allocation is needed only for using another helper function
get_scaler_data_for_plane().
[How]
Modify helpers to pass a pointer to scaler_data within existing context,
eliminating the need for dynamic memory allocation/deallocation
and copying.
Fixes: 366e77cd49 ("drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When always scale flag is set at the API level, the number of taps
should not be overridden to zero in the identity scaling ratio case,
and luma scale should not be set to bypass regardless of luma scale
ratio
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Jesse Agate <jesse.agate@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary
* Update IPS checks to properly include all ASICs.
* Refactoring DSC enum dsc_bits_per_comp
* Fix ACPI edid parsing issue
* Update AUX read interval for LTTPR with old sinks
* Correct prefetch calculation
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously the 'dsc_bits_per_comp' enumeration was defined in individual
.c files, making it unavailable for other files that may need it.
[How]
The 'dsc_bits_per_comp' enumeration has been relocated to a common header
file.
Reviewed-by: Mounika Adhuri <Mounika.Adhuri@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use gpiod_set_value_cansleep() instead of gpiod_set_value()
to fix the below call trace in the boot log:
[ 5.690534] Call trace:
[ 5.690536] gpiod_set_value+0x40/0xa4
[ 5.690540] anx7625_runtime_pm_resume+0xa0/0x324 [anx7625]
[ 5.690545] __rpm_callback+0x48/0x1d8
[ 5.690549] rpm_callback+0x6c/0x78
Certain GPIO controllers require access via message-based buses
such as I2C or SPI, which may cause the GPIOs to enter a sleep
state. Therefore, use the gpiod_set_value_cansleep().
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250505094245.2660750-7-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In the anx7625_sink_detect(), the device is checked to see
if it is a panel bridge, and it always sends a "connected"
status to the connector. When adding the DP port on port 1 of the
anx7625, it incorrectly treats it as a panel bridge and sends an
always "connected" status. Instead of checking the status on the
panel bridge, it's better to check the hpd_status for connectors
that supports hot-plugging. This way, it verifies the hpd_status
variable before sending the status to the connector.
In case of eDP, anx7625_bridge_detect() will not get called because
the bridge->ops condition in anx7625_link_bridge() will not be
satisfied. Since anx7625_sink_detect() is called from
anx7625_bridge_detect(), this results in the sink_detect logic not
being executed for eDP.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-6-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The anx7625_link_bridge() checks if a device is not a panel
bridge and add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT
flags to the drm_bridge->ops. However, on port 1 of the anx7625
bridge, any device added is always treated as a panel bridge,
preventing connector_detect() from being called. To resolve
this, instead of just checking if it is a panel bridge, verify
the type of device based on aux whether it is a DisplayPort or
eDP panel. If the device is not of the eDP type, add
DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT flags to the to
the drm_bridge->ops.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-5-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
