Previously when retrieving `bpf_link_info.perf_event` for
kprobe/uprobe/tracepoint, the `name_len` field was not populated by the
kernel, leaving it to reflect the value initially set by the user. This
behavior was inconsistent with how other input/output string buffer
fields function (e.g. `raw_tracepoint.tp_name_len`).
This patch fills `name_len` with the actual size of the string name.
Fixes: 1b715e1b0e ("bpf: Support ->fill_link_info for perf_event")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20241008164312.46269-1-wudevelops@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The kzmalloc call in bpf_check can fail when memory is very fragmented,
which in turn can lead to an OOM kill.
Use kvzmalloc to fall back to vmalloc when memory is too fragmented to
allocate an order 3 sized bpf verifier environment.
Admittedly this is not a very common case, and only happens on systems
where memory has already been squeezed close to the limit, but this does
not seem like much of a hot path, and it's a simple enough fix.
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/r/20241008170735.16766766@imladris.surriel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When trying to repeat the btf fields for array of nested struct, it
doesn't check the remaining info_cnt. The following splat will be
reported when the value of ret * nelems is greater than BTF_FIELDS_MAX:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49
index 11 is out of range for type 'btf_field_info [11]'
CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ...
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
ubsan_epilogue+0x9/0x40
__ubsan_handle_out_of_bounds+0x6f/0x80
? kallsyms_lookup_name+0x48/0xb0
btf_parse_fields+0x992/0xce0
map_create+0x591/0x770
__sys_bpf+0x229/0x2410
__x64_sys_bpf+0x1f/0x30
x64_sys_call+0x199/0x9f0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fea56f2cc5d
......
</TASK>
---[ end trace ]---
Fix it by checking the remaining info_cnt in btf_repeat_fields() before
repeating the btf fields.
Fixes: 64e8ee8148 ("bpf: look into the types of the fields of a struct type recursively.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241008071114.3718177-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The sysctl core is moving to allow "struct ctl_table" in read-only memory.
As a preparation for that all functions handling "struct ctl_table" need
to be able to work with "const struct ctl_table".
As __cgroup_bpf_run_filter_sysctl() does not modify its table, it can be
adapted trivially.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
A hung_task problem shown below was found:
INFO: task kworker/0:0:8 blocked for more than 327 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Workqueue: events cgroup_bpf_release
Call Trace:
<TASK>
__schedule+0x5a2/0x2050
? find_held_lock+0x33/0x100
? wq_worker_sleeping+0x9e/0xe0
schedule+0x9f/0x180
schedule_preempt_disabled+0x25/0x50
__mutex_lock+0x512/0x740
? cgroup_bpf_release+0x1e/0x4d0
? cgroup_bpf_release+0xcf/0x4d0
? process_scheduled_works+0x161/0x8a0
? cgroup_bpf_release+0x1e/0x4d0
? mutex_lock_nested+0x2b/0x40
? __pfx_delay_tsc+0x10/0x10
mutex_lock_nested+0x2b/0x40
cgroup_bpf_release+0xcf/0x4d0
? process_scheduled_works+0x161/0x8a0
? trace_event_raw_event_workqueue_execute_start+0x64/0xd0
? process_scheduled_works+0x161/0x8a0
process_scheduled_works+0x23a/0x8a0
worker_thread+0x231/0x5b0
? __pfx_worker_thread+0x10/0x10
kthread+0x14d/0x1c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x59/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
This issue can be reproduced by the following pressuse test:
1. A large number of cpuset cgroups are deleted.
2. Set cpu on and off repeatly.
3. Set watchdog_thresh repeatly.
The scripts can be obtained at LINK mentioned above the signature.
The reason for this issue is cgroup_mutex and cpu_hotplug_lock are
acquired in different tasks, which may lead to deadlock.
It can lead to a deadlock through the following steps:
1. A large number of cpusets are deleted asynchronously, which puts a
large number of cgroup_bpf_release works into system_wq. The max_active
of system_wq is WQ_DFL_ACTIVE(256). Consequently, all active works are
cgroup_bpf_release works, and many cgroup_bpf_release works will be put
into inactive queue. As illustrated in the diagram, there are 256 (in
the acvtive queue) + n (in the inactive queue) works.
2. Setting watchdog_thresh will hold cpu_hotplug_lock.read and put
smp_call_on_cpu work into system_wq. However step 1 has already filled
system_wq, 'sscs.work' is put into inactive queue. 'sscs.work' has
to wait until the works that were put into the inacvtive queue earlier
have executed (n cgroup_bpf_release), so it will be blocked for a while.
3. Cpu offline requires cpu_hotplug_lock.write, which is blocked by step 2.
4. Cpusets that were deleted at step 1 put cgroup_release works into
cgroup_destroy_wq. They are competing to get cgroup_mutex all the time.
When cgroup_metux is acqured by work at css_killed_work_fn, it will
call cpuset_css_offline, which needs to acqure cpu_hotplug_lock.read.
However, cpuset_css_offline will be blocked for step 3.
5. At this moment, there are 256 works in active queue that are
cgroup_bpf_release, they are attempting to acquire cgroup_mutex, and as
a result, all of them are blocked. Consequently, sscs.work can not be
executed. Ultimately, this situation leads to four processes being
blocked, forming a deadlock.
system_wq(step1) WatchDog(step2) cpu offline(step3) cgroup_destroy_wq(step4)
...
2000+ cgroups deleted asyn
256 actives + n inactives
__lockup_detector_reconfigure
P(cpu_hotplug_lock.read)
put sscs.work into system_wq
256 + n + 1(sscs.work)
sscs.work wait to be executed
warting sscs.work finish
percpu_down_write
P(cpu_hotplug_lock.write)
...blocking...
css_killed_work_fn
P(cgroup_mutex)
cpuset_css_offline
P(cpu_hotplug_lock.read)
...blocking...
256 cgroup_bpf_release
mutex_lock(&cgroup_mutex);
..blocking...
To fix the problem, place cgroup_bpf_release works on a dedicated
workqueue which can break the loop and solve the problem. System wqs are
for misc things which shouldn't create a large number of concurrent work
items. If something is going to generate >WQ_DFL_ACTIVE(256) concurrent
work items, it should use its own dedicated workqueue.
Fixes: 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/cgroups/e90c32d2-2a85-4f28-9154-09c7d320cb60@huawei.com/T/#t
Tested-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
some of those used to be needed, some had been cargo-culted for
no reason...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Once upon a time, predecessors of those used to do file lookup
without bumping a refcount, provided that caller held rcu_read_lock()
across the lookup and whatever it wanted to read from the struct
file found. When struct file allocation switched to SLAB_TYPESAFE_BY_RCU,
that stopped being feasible and these primitives started to bump the
file refcount for lookup result, requiring the caller to call fput()
afterwards.
But that turned them pointless - e.g.
rcu_read_lock();
file = lookup_fdget_rcu(fd);
rcu_read_unlock();
is equivalent to
file = fget_raw(fd);
and all callers of lookup_fdget_rcu() are of that form. Similarly,
task_lookup_fdget_rcu() calls can be replaced with calling fget_task().
task_lookup_next_fdget_rcu() doesn't have direct counterparts, but
its callers would be happier if we replaced it with an analogue that
deals with RCU internally.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
struct btf_kind_operations are not modified in BTF.
Constifying this structures moves some data to a read-only section,
so increase overall security, especially when the structure holds
some function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
184320 7091 548 191959 2edd7 kernel/bpf/btf.o
After:
=====
text data bss dec hex filename
184896 6515 548 191959 2edd7 kernel/bpf/btf.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/9192ab72b2e9c66aefd6520f359a20297186327f.1726417289.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Range propagation must not affect subreg_def marks, otherwise the
following example is rewritten by verifier incorrectly when
BPF_F_TEST_RND_HI32 flag is set:
0: call bpf_ktime_get_ns call bpf_ktime_get_ns
1: r0 &= 0x7fffffff after verifier r0 &= 0x7fffffff
2: w1 = w0 rewrites w1 = w0
3: if w0 < 10 goto +0 --------------> r11 = 0x2f5674a6 (r)
4: r1 >>= 32 r11 <<= 32 (r)
5: r0 = r1 r1 |= r11 (r)
6: exit; if w0 < 0xa goto pc+0
r1 >>= 32
r0 = r1
exit
(or zero extension of w1 at (2) is missing for architectures that
require zero extension for upper register half).
The following happens w/o this patch:
- r0 is marked as not a subreg at (0);
- w1 is marked as subreg at (2);
- w1 subreg_def is overridden at (3) by copy_register_state();
- w1 is read at (5) but mark_insn_zext() does not mark (2)
for zero extension, because w1 subreg_def is not set;
- because of BPF_F_TEST_RND_HI32 flag verifier inserts random
value for hi32 bits of (2) (marked (r));
- this random value is read at (5).
Fixes: 75748837b7 ("bpf: Propagate scalar ranges through register assignments.")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/bpf/7e2aa30a62d740db182c170fdd8f81c596df280d.camel@gmail.com
Link: https://lore.kernel.org/bpf/20240924210844.1758441-1-eddyz87@gmail.com
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function __bpf_ringbuf_reserve is invoked from a tracepoint, which
disables preemption. Using spinlock_t in this context can lead to a
"sleep in atomic" warning in the RT variant. This issue is illustrated
in the example below:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556208, name: test_progs
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
INFO: lockdep is turned off.
Preemption disabled at:
[<ffffd33a5c88ea44>] migrate_enable+0xc0/0x39c
CPU: 7 PID: 556208 Comm: test_progs Tainted: G
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
dump_backtrace+0xac/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0xac/0xe8
dump_stack+0x18/0x30
__might_resched+0x3bc/0x4fc
rt_spin_lock+0x8c/0x1a4
__bpf_ringbuf_reserve+0xc4/0x254
bpf_ringbuf_reserve_dynptr+0x5c/0xdc
bpf_prog_ac3d15160d62622a_test_read_write+0x104/0x238
trace_call_bpf+0x238/0x774
perf_call_bpf_enter.isra.0+0x104/0x194
perf_syscall_enter+0x2f8/0x510
trace_sys_enter+0x39c/0x564
syscall_trace_enter+0x220/0x3c0
do_el0_svc+0x138/0x1dc
el0_svc+0x54/0x130
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Switch the spinlock to raw_spinlock_t to avoid this error.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Brian Grech <bgrech@redhat.com>
Signed-off-by: Wander Lairson Costa <wander.lairson@gmail.com>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240920190700.617253-1-wander@redhat.com
Pull bpf 'struct fd' updates from Alexei Starovoitov:
"This includes struct_fd BPF changes from Al and Andrii"
* tag 'bpf-next-6.12-struct-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: convert bpf_token_create() to CLASS(fd, ...)
security,bpf: constify struct path in bpf_token_create() LSM hook
bpf: more trivial fdget() conversions
bpf: trivial conversions for fdget()
bpf: switch maps to CLASS(fd, ...)
bpf: factor out fetching bpf_map from FD and adding it to used_maps list
bpf: switch fdget_raw() uses to CLASS(fd_raw, ...)
bpf: convert __bpf_prog_get() to CLASS(fd, ...)
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
Pull bpf updates from Alexei Starovoitov:
- Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with
corresponding support in LLVM.
It is similar to existing 'no_caller_saved_registers' attribute in
GCC/LLVM with a provision for backward compatibility. It allows
compilers generate more efficient BPF code assuming the verifier or
JITs will inline or partially inline a helper/kfunc with such
attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast,
bpf_get_smp_processor_id are the first set of such helpers.
- Harden and extend ELF build ID parsing logic.
When called from sleepable context the relevants parts of ELF file
will be read to find and fetch .note.gnu.build-id information. Also
harden the logic to avoid TOCTOU, overflow, out-of-bounds problems.
- Improvements and fixes for sched-ext:
- Allow passing BPF iterators as kfunc arguments
- Make the pointer returned from iter_next method trusted
- Fix x86 JIT convergence issue due to growing/shrinking conditional
jumps in variable length encoding
- BPF_LSM related:
- Introduce few VFS kfuncs and consolidate them in
fs/bpf_fs_kfuncs.c
- Enforce correct range of return values from certain LSM hooks
- Disallow attaching to other LSM hooks
- Prerequisite work for upcoming Qdisc in BPF:
- Allow kptrs in program provided structs
- Support for gen_epilogue in verifier_ops
- Important fixes:
- Fix uprobe multi pid filter check
- Fix bpf_strtol and bpf_strtoul helpers
- Track equal scalars history on per-instruction level
- Fix tailcall hierarchy on x86 and arm64
- Fix signed division overflow to prevent INT_MIN/-1 trap on x86
- Fix get kernel stack in BPF progs attached to tracepoint:syscall
- Selftests:
- Add uprobe bench/stress tool
- Generate file dependencies to drastically improve re-build time
- Match JIT-ed and BPF asm with __xlated/__jited keywords
- Convert older tests to test_progs framework
- Add support for RISC-V
- Few fixes when BPF programs are compiled with GCC-BPF backend
(support for GCC-BPF in BPF CI is ongoing in parallel)
- Add traffic monitor
- Enable cross compile and musl libc
* tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits)
btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version
btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug
btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh
bpf: Call the missed kfree() when there is no special field in btf
bpf: Call the missed btf_record_free() when map creation fails
selftests/bpf: Add a test case to write mtu result into .rodata
selftests/bpf: Add a test case to write strtol result into .rodata
selftests/bpf: Rename ARG_PTR_TO_LONG test description
selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
bpf: Fix helper writes to read-only maps
bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers
bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
selftests/bpf: Add tests for sdiv/smod overflow cases
bpf: Fix a sdiv overflow issue
libbpf: Add bpf_object__token_fd accessor
docs/bpf: Add missing BPF program types to docs
docs/bpf: Add constant values for linkages
bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
...
Call the missed kfree() in btf_parse_struct_metas() when there is no
special field in btf, otherwise will get the following kmemleak report:
unreferenced object 0xffff888101033620 (size 8):
comm "test_progs", pid 604, jiffies 4295127011
......
backtrace (crc e77dc444):
[<00000000186f90f3>] kmemleak_alloc+0x4b/0x80
[<00000000ac8e9c4d>] __kmalloc_cache_noprof+0x2a1/0x310
[<00000000d99d68d6>] btf_new_fd+0x72d/0xe90
[<00000000f010b7f8>] __sys_bpf+0xec3/0x2410
[<00000000e077ed6f>] __x64_sys_bpf+0x1f/0x30
[<00000000a12f9e55>] x64_sys_call+0x199/0x9f0
[<00000000f3029ea6>] do_syscall_64+0x3b/0xc0
[<000000005640913a>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 7a851ecb18 ("bpf: Search for kptrs in prog BTF structs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240912012845.3458483-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When security_bpf_map_create() in map_create() fails, map_create() will
call btf_put() and ->map_free() callback to free the map. It doesn't
free the btf_record of map value, so add the missed btf_record_free()
when map creation fails.
However btf_record_free() needs to be called after ->map_free() just
like bpf_map_free_deferred() did, because ->map_free() may use the
btf_record to free the special fields in preallocated map value. So
factor out bpf_map_free() helper to free the map, btf_record, and btf
orderly and use the helper in both map_create() and
bpf_map_free_deferred().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240912012845.3458483-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input
arguments, zero the value for the case of an error as otherwise it could leak
memory. For tracing, it is not needed given CAP_PERFMON can already read all
kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped
in here.
Also, the MTU helpers mtu_len pointer value is being written but also read.
Technically, the MEM_UNINIT should not be there in order to always force init.
Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now
implies two things actually: i) write into memory, ii) memory does not have
to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory,
ii) memory must be initialized. This means that for bpf_*_check_mtu() we're
readding the issue we're trying to fix, that is, it would then be able to
write back into things like .rodata BPF maps. Follow-up work will rework the
MEM_UNINIT semantics such that the intent can be better expressed. For now
just clear the *mtu_len on error path which can be lifted later again.
Fixes: 8a67f2de9b ("bpf: expose bpf_strtol and bpf_strtoul to all program types")
Fixes: d7a4cb9b67 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/e5edd241-59e7-5e39-0ee5-a51e31b6840a@iogearbox.net
Link: https://lore.kernel.org/r/20240913191754.13290-5-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When checking malformed helper function signatures, also take other argument
types into account aside from just ARG_PTR_TO_UNINIT_MEM.
This concerns (formerly) ARG_PTR_TO_{INT,LONG} given uninitialized memory can
be passed there, too.
The func proto sanity check goes back to commit 435faee1aa ("bpf, verifier:
add ARG_PTR_TO_RAW_STACK type"), and its purpose was to detect wrong func protos
which had more than just one MEM_UNINIT-tagged type as arguments.
The reason more than one is currently not supported is as we mark stack slots with
STACK_MISC in check_helper_call() in case of raw mode based on meta.access_size to
allow uninitialized stack memory to be passed to helpers when they just write into
the buffer.
Probing for base type as well as MEM_UNINIT tagging ensures that other types do not
get missed (as it used to be the case for ARG_PTR_TO_{INT,LONG}).
Fixes: 57c3bb725a ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types")
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240913191754.13290-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lonial found an issue that despite user- and BPF-side frozen BPF map
(like in case of .rodata), it was still possible to write into it from
a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT}
as arguments.
In check_func_arg() when the argument is as mentioned, the meta->raw_mode
is never set. Later, check_helper_mem_access(), under the case of
PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the
subsequent call to check_map_access_type() and given the BPF map is
read-only it succeeds.
The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT
when results are written into them as opposed to read out of them. The
latter indicates that it's okay to pass a pointer to uninitialized memory
as the memory is written to anyway.
However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM
just with additional alignment requirement. So it is better to just get
rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the
fixed size memory types. For this, add MEM_ALIGNED to additionally ensure
alignment given these helpers write directly into the args via *<ptr> = val.
The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>).
MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated
argument types, since in !MEM_FIXED_SIZE cases the verifier does not know
the buffer size a priori and therefore cannot blindly write *<ptr> = val.
Fixes: 57c3bb725a ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240913191754.13290-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Both bpf_strtol() and bpf_strtoul() helpers passed a temporary "long long"
respectively "unsigned long long" to __bpf_strtoll() / __bpf_strtoull().
Later, the result was checked for truncation via _res != ({unsigned,} long)_res
as the destination buffer for the BPF helpers was of type {unsigned,} long
which is 32bit on 32bit architectures.
Given the latter was a bug in the helper signatures where the destination buffer
got adjusted to {s,u}64, the truncation check can now be removed.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240913191754.13290-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_strtol() and bpf_strtoul() helpers are currently broken on 32bit:
The argument type ARG_PTR_TO_LONG is BPF-side "long", not kernel-side "long"
and therefore always considered fixed 64bit no matter if 64 or 32bit underlying
architecture.
This contract breaks in case of the two mentioned helpers since their BPF_CALL
definition for the helpers was added with {unsigned,}long *res. Meaning, the
transition from BPF-side "long" (BPF program) to kernel-side "long" (BPF helper)
breaks here.
Both helpers call __bpf_strtoll() with "long long" correctly, but later assigning
the result into 32-bit "*(long *)" on 32bit architectures. From a BPF program
point of view, this means upper bits will be seen as uninitialised.
Therefore, fix both BPF_CALL signatures to {s,u}64 types to fix this situation.
Now, changing also uapi/bpf.h helper documentation which generates bpf_helper_defs.h
for BPF programs is tricky: Changing signatures there to __{s,u}64 would trigger
compiler warnings (incompatible pointer types passing 'long *' to parameter of type
'__s64 *' (aka 'long long *')) for existing BPF programs.
Leaving the signatures as-is would be fine as from BPF program point of view it is
still BPF-side "long" and thus equivalent to __{s,u}64 on 64 or 32bit underlying
architectures.
Note that bpf_strtol() and bpf_strtoul() are the only helpers with this issue.
Fixes: d7a4cb9b67 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/481fcec8-c12c-9abb-8ecb-76c71c009959@iogearbox.net
Link: https://lore.kernel.org/r/20240913191754.13290-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Zac Ecob reported a problem where a bpf program may cause kernel crash due
to the following error:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI
The failure is due to the below signed divide:
LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808.
LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808,
but it is impossible since for 64-bit system, the maximum positive
number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will
cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is
LLONG_MIN.
Further investigation found all the following sdiv/smod cases may trigger
an exception when bpf program is running on x86_64 platform:
- LLONG_MIN/-1 for 64bit operation
- INT_MIN/-1 for 32bit operation
- LLONG_MIN%-1 for 64bit operation
- INT_MIN%-1 for 32bit operation
where -1 can be an immediate or in a register.
On arm64, there are no exceptions:
- LLONG_MIN/-1 = LLONG_MIN
- INT_MIN/-1 = INT_MIN
- LLONG_MIN%-1 = 0
- INT_MIN%-1 = 0
where -1 can be an immediate or in a register.
Insn patching is needed to handle the above cases and the patched codes
produced results aligned with above arm64 result. The below are pseudo
codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0
and the divisor is stored in a register.
sdiv:
tmp = rX
tmp += 1 /* [-1, 0] -> [0, 1]
if tmp >(unsigned) 1 goto L2
if tmp == 0 goto L1
rY = 0
L1:
rY = -rY;
goto L3
L2:
rY /= rX
L3:
smod:
tmp = rX
tmp += 1 /* [-1, 0] -> [0, 1]
if tmp >(unsigned) 1 goto L1
if tmp == 1 (is64 ? goto L2 : goto L3)
rY = 0;
goto L2
L1:
rY %= rX
L2:
goto L4 // only when !is64
L3:
wY = wY // only when !is64
L4:
[1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240913150326.1187788-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-09-11
We've added 12 non-merge commits during the last 16 day(s) which contain
a total of 20 files changed, 228 insertions(+), 30 deletions(-).
There's a minor merge conflict in drivers/net/netkit.c:
00d066a4d4 ("netdev_features: convert NETIF_F_LLTX to dev->lltx")
d966087948 ("netkit: Disable netpoll support")
The main changes are:
1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used
to easily parse skbs in BPF programs attached to tracepoints,
from Philo Lu.
2) Add a cond_resched() point in BPF's sock_hash_free() as there have
been several syzbot soft lockup reports recently, from Eric Dumazet.
3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which
got noticed when zero copy ice driver started to use it,
from Maciej Fijalkowski.
4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs
up via netif_receive_skb_list() to better measure latencies,
from Daniel Xu.
5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann.
6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but
instead gather the actual value via /proc/sys/net/core/max_skb_frags,
also from Maciej Fijalkowski.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
sock_map: Add a cond_resched() in sock_hash_free()
selftests/bpf: Expand skb dynptr selftests for tp_btf
bpf: Allow bpf_dynptr_from_skb() for tp_btf
tcp: Use skb__nullable in trace_tcp_send_reset
selftests/bpf: Add test for __nullable suffix in tp_btf
bpf: Support __nullable argument suffix for tp_btf
bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv
selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob
xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc()
tcp_bpf: Remove an unused parameter for bpf_tcp_ingress()
bpf, sockmap: Correct spelling skmsg.c
netkit: Disable netpoll support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://patch.msgid.link/20240911211525.13834-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Keep file reference through the entire thing, don't bother with grabbing
struct path reference and while we are at it, don't confuse the hell out
of readers by random mix of path.dentry->d_sb and path.mnt->mnt_sb uses -
these two are equal, so just put one of those into a local variable and
use that.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add sleepable implementations of bpf_get_stack() and
bpf_get_task_stack() helpers and allow them to be used from sleepable
BPF program (e.g., sleepable uprobes).
Note, the stack trace IPs capturing itself is not sleepable (that would
need to be a separate project), only build ID fetching is sleepable and
thus more reliable, as it will wait for data to be paged in, if
necessary. For that we make use of sleepable build_id_parse()
implementation.
Now that build ID related internals in kernel/bpf/stackmap.c can be used
both in sleepable and non-sleepable contexts, we need to add additional
rcu_read_lock()/rcu_read_unlock() protection around fetching
perf_callchain_entry, but with the refactoring in previous commit it's
now pretty straightforward. We make sure to do rcu_read_unlock (in
sleepable mode only) right before stack_map_get_build_id_offset() call
which can sleep. By that time we don't have any more use of
perf_callchain_entry.
Note, bpf_get_task_stack() will fail for user mode if task != current.
And for kernel mode build ID are irrelevant. So in that sense adding
sleepable bpf_get_task_stack() implementation is a no-op. It feel right
to wire this up for symmetry and completeness, but I'm open to just
dropping it until we support `user && crosstask` condition.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Change stack_map_get_build_id_offset() which is used to convert stack
trace IP addresses into build ID+offset pairs. Right now this function
accepts an array of u64s as an input, and uses array of
struct bpf_stack_build_id as an output.
This is problematic because u64 array is coming from
perf_callchain_entry, which is (non-sleepable) RCU protected, so once we
allows sleepable build ID fetching, this all breaks down.
But its actually pretty easy to make stack_map_get_build_id_offset()
works with array of struct bpf_stack_build_id as both input and output.
Which is what this patch is doing, eliminating the dependency on
perf_callchain_entry. We require caller to fill out
bpf_stack_build_id.ip fields (all other can be left uninitialized), and
update in place as we do build ID resolution.
We make sure to READ_ONCE() and cache locally current IP value as we
used it in a few places to find matching VMA and so on. Given this data
is directly accessible and modifiable by user's BPF code, we should make
sure to have a consistent view of it.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make it clear that build_id_parse() assumes that it can take no page
fault by renaming it and current few users to build_id_parse_nofault().
Also add build_id_parse() stub which for now falls back to non-sleepable
implementation, but will be changed in subsequent patches to take
advantage of sleepable context. PROCMAP_QUERY ioctl() on
/proc/<pid>/maps file is using build_id_parse() and will automatically
take advantage of more reliable sleepable context implementation.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pointers passed to tp_btf were trusted to be valid, but some tracepoints
do take NULL pointer as input, such as trace_tcp_send_reset(). Then the
invalid memory access cannot be detected by verifier.
This patch fix it by add a suffix "__nullable" to the unreliable
argument. The suffix is shown in btf, and PTR_MAYBE_NULL will be added
to nullable arguments. Then users must check the pointer before use it.
A problem here is that we use "btf_trace_##call" to search func_proto.
As it is a typedef, argument names as well as the suffix are not
recorded. To solve this, I use bpf_raw_event_map to find
"__bpf_trace##template" from "btf_trace_##call", and then we can see the
suffix.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240911033719.91468-2-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
cpumap takes RX processing out of softirq and onto a separate kthread.
Since the kthread needs to be scheduled in order to run (versus softirq
which does not), we can theoretically experience extra latency if the
system is under load and the scheduler is being unfair to us.
Moving the tracepoint to before passing the skb list up the stack allows
users to more accurately measure enqueue/dequeue latency introduced by
cpumap via xdp:xdp_cpumap_enqueue and xdp:xdp_cpumap_kthread tracepoints.
f9419f7bd7 ("bpf: cpumap add tracepoints") which added the tracepoints
states that the intent behind them was for general observability and for
a feedback loop to see if the queues are being overwhelmed. This change
does not mess with either of those use cases but rather adds a third
one.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/bpf/47615d5b5e302e4bd30220473779e98b492d47cd.1725585718.git.dxu@dxuuu.xyz
When "arg#%d expected pointer to ctx, but got %s" error is printed, both
template parts actually point to the type of the argument, therefore, it
will also say "but got PTR", regardless of what was the actual register
type.
Fix the message to print the register type in the second part of the
template, change the existing test to adapt to the new format, and add a
new test to test the case when arg is a pointer to context, but reg is a
scalar.
Fixes: 00b85860fe ("bpf: Rewrite kfunc argument handling")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240909133909.1315460-1-maxim@isovalent.com
Commit 980ca8ceea ("bpf: check bpf_dummy_struct_ops program params for
test runs") does bitwise AND between reg_type and PTR_MAYBE_NULL, which
is correct, but due to type difference the compiler complains:
net/bpf/bpf_dummy_struct_ops.c:118:31: warning: bitwise operation between different enumeration types ('const enum bpf_reg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
118 | if (info && (info->reg_type & PTR_MAYBE_NULL))
| ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
Workaround the warning by moving the type_may_be_null() helper from
verifier.c into bpf_verifier.h, and reuse it here to check whether param
is nullable.
Fixes: 980ca8ceea ("bpf: check bpf_dummy_struct_ops program params for test runs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404241956.HEiRYwWq-lkp@intel.com/
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240905055233.70203-1-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch removes the insn_buf array stack usage from the
inline_bpf_loop(). Instead, the env->insn_buf is used. The
usage in inline_bpf_loop() needs more than 16 insn, so the
INSN_BUF_SIZE needs to be increased from 16 to 32.
The compiler stack size warning on the verifier is gone
after this change.
Cc: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240904180847.56947-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If the length of the name string is 1 and the value of name[0] is NULL
byte, an OOB vulnerability occurs in btf_name_valid_section() and the
return value is true, so the invalid name passes the check.
To solve this, you need to check if the first position is NULL byte and
if the first character is printable.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Fixes: bd70a8fb7c ("bpf: Allow all printable characters in BTF DATASEC names")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240831054702.364455-1-aha310510@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
According to the documentation, when building a kernel with the C=2
parameter, all source files should be checked. But this does not happen
for the kernel/bpf/ directory.
$ touch kernel/bpf/core.o
$ make C=2 CHECK=true kernel/bpf/core.o
Outputs:
CHECK scripts/mod/empty.c
CALL scripts/checksyscalls.sh
DESCEND objtool
INSTALL libsubcmd_headers
CC kernel/bpf/core.o
As can be seen the compilation is done, but CHECK is not executed. This
happens because kernel/bpf/Makefile has defined its own rule for
compilation and forgotten the macro that does the check.
There is no need to duplicate the build code, and this rule can be
removed to use generic rules.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/r/20240830074350.211308-1-legion@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently we cannot pass the pointer returned by iter next method as
argument to KF_TRUSTED_ARGS or KF_RCU kfuncs, because the pointer
returned by iter next method is not "valid".
This patch sets the pointer returned by iter next method to be valid.
This is based on the fact that if the iterator is implemented correctly,
then the pointer returned from the iter next method should be valid.
This does not make NULL pointer valid. If the iter next method has
KF_RET_NULL flag, then the verifier will ask the ebpf program to
check NULL pointer.
KF_RCU_PROTECTED iterator is a special case, the pointer returned by
iter next method should only be valid within RCU critical section,
so it should be with MEM_RCU, not PTR_TRUSTED.
Another special case is bpf_iter_num_next, which returns a pointer with
base type PTR_TO_MEM. PTR_TO_MEM should not be combined with type flag
PTR_TRUSTED (PTR_TO_MEM already means the pointer is valid).
The pointer returned by iter next method of other types of iterators
is with PTR_TRUSTED.
In addition, this patch adds get_iter_from_state to help us get the
current iterator from the current state.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB584869F8B448EA1C87B7CDA399962@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a .gen_epilogue to the bpf_verifier_ops. It is similar
to the existing .gen_prologue. Instead of allowing a subsystem
to run code at the beginning of a bpf prog, it allows the subsystem
to run code just before the bpf prog exit.
One of the use case is to allow the upcoming bpf qdisc to ensure that
the skb->dev is the same as the qdisc->dev_queue->dev. The bpf qdisc
struct_ops implementation could either fix it up or drop the skb.
Another use case could be in bpf_tcp_ca.c to enforce snd_cwnd
has sane value (e.g. non zero).
The epilogue can do the useful thing (like checking skb->dev) if it
can access the bpf prog's ctx. Unlike prologue, r1 may not hold the
ctx pointer. This patch saves the r1 in the stack if the .gen_epilogue
has returned some instructions in the "epilogue_buf".
The existing .gen_prologue is done in convert_ctx_accesses().
The new .gen_epilogue is done in the convert_ctx_accesses() also.
When it sees the (BPF_JMP | BPF_EXIT) instruction, it will be patched
with the earlier generated "epilogue_buf". The epilogue patching is
only done for the main prog.
Only one epilogue will be patched to the main program. When the
bpf prog has multiple BPF_EXIT instructions, a BPF_JA is used
to goto the earlier patched epilogue. Majority of the archs
support (BPF_JMP32 | BPF_JA): x86, arm, s390, risv64, loongarch,
powerpc and arc. This patch keeps it simple and always
use (BPF_JMP32 | BPF_JA). A new macro BPF_JMP32_A is added to
generate the (BPF_JMP32 | BPF_JA) insn.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
