Replace _free_event()'s use of perf_addr_filters_splice()s use with an
explicit perf_free_addr_filters() with the explicit propery that it is
able to be called a second time without ill effect.
Most notable, referencing event->pmu must be avoided when there are no
filters left (from eg a previous call).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.868460518@infradead.org
Currently, __reserve_bp_slot() returns -ENOSPC for unsupported
breakpoint types on the architecture. For example, powerpc
does not support hardware instruction breakpoints. This causes
the perf_skip BPF selftest to fail, as neither ENOENT nor
EOPNOTSUPP is returned by perf_event_open for unsupported
breakpoint types. As a result, the test that should be skipped
for this arch is not correctly identified.
To resolve this, hw_breakpoint_event_init() should exit early by
checking for unsupported breakpoint types using
hw_breakpoint_slots_cached() and return the appropriate error
(-EOPNOTSUPP).
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lore.kernel.org/r/20250303092451.1862862-1-skb99@linux.ibm.com
When debugging MSI-related hardware issues (e.g. interrupt delivery
failures), developers currently need to either:
1. Recompile the kernel with dynamic debug for tracing msi_desc.
2. Manually read device registers through low-level tools.
Both approaches become challenging in production environments where
dynamic debugging is often disabled.
The interrupt core provides a debugfs interface for inspection of interrupt
related data, which contains the per interrupt information in the view of
the hierarchical interrupt domains. Though this interface does not expose
the MSI address/data pair, which is important information to:
- Verify whether the MSI configuration matches the hardware expectations
- Diagnose interrupt routing errors (e.g., mismatched destination ID)
- Validate remapping behavior in virtualized environments
Implement the debug_show() callback for the generic MSI interrupt domains,
and use it to expose the MSI address/data pair in the per interrupt
diagnostics.
Sample output:
address_hi: 0x00000000
address_lo: 0xfe670040
msg_data: 0x00000001
[ tglx: Massaged change log. Use irq_data_get_msi_desc() to avoid pointless
lookup. ]
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250303121008.309265-1-18255117159@163.com
Pull for-6.14-fixes to receive:
9360dfe4cb ("sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl()")
which conflicts with:
337d1b354a ("sched_ext: Move built-in idle CPU selection policy to a separate file")
Signed-off-by: Tejun Heo <tj@kernel.org>
If a BPF scheduler provides an invalid CPU (outside the nr_cpu_ids
range) as prev_cpu to scx_bpf_select_cpu_dfl() it can cause a kernel
crash.
To prevent this, validate prev_cpu in scx_bpf_select_cpu_dfl() and
trigger an scx error if an invalid CPU is specified.
Fixes: f0e1a0643a ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull probe events fixes from Masami Hiramatsu:
- probe-events: Remove unused MAX_ARG_BUF_LEN macro - it is not used
- fprobe-events: Log error for exceeding the number of entry args.
Since the max number of entry args is limited, it should be checked
and rejected when the parser detects it.
- tprobe-events: Reject invalid tracepoint name
If a user specifies an invalid tracepoint name (e.g. including '/')
then the new event is not defined correctly in the eventfs.
- tprobe-events: Fix a memory leak when tprobe defined with $retval
There is a memory leak if tprobe is defined with $retval.
* tag 'probes-fixes-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Remove unused MAX_ARG_BUF_LEN macro
tracing: fprobe-events: Log error for exceeding the number of entry args
tracing: tprobe-events: Reject invalid tracepoint name
tracing: tprobe-events: Fix a memory leak when tprobe with $retval
There is a fairly obvious race between perf_init_event() doing
idr_find() and perf_pmu_register() doing idr_alloc() with an
incompletely initialized PMU pointer.
Avoid by doing idr_alloc() on a NULL pointer to register the id, and
swizzling the real struct pmu pointer at the end using idr_replace().
Also making sure to not set struct pmu members after publishing
the struct pmu, duh.
[ introduce idr_cmpxchg() in order to better handle the idr_replace()
error case -- if it were to return an unexpected pointer, it will
already have replaced the value and there is no going back. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.858805880@infradead.org
Commit a63fbed776 ("perf/tracing/cpuhotplug: Fix locking order")
placed pmus_lock inside pmus_srcu, this makes perf_pmu_unregister()
trip lockdep.
Move the locking about such that only pmu_idr and pmus (list) are
modified while holding pmus_lock. This avoids doing synchronize_srcu()
while holding pmus_lock and all is well again.
Fixes: a63fbed776 ("perf/tracing/cpuhotplug: Fix locking order")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.679556858@infradead.org
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
Currently, watch_queue_set_size() modifies the pipe buffers charged to
user->pipe_bufs without updating the pipe->nr_accounted on the pipe
itself, due to the if (!pipe_has_watch_queue()) test in
pipe_resize_ring(). This means that when the pipe is ultimately freed,
we decrement user->pipe_bufs by something other than what than we had
charged to it, potentially leading to an underflow. This in turn can
cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM.
To remedy this, explicitly account for the pipe usage in
watch_queue_set_size() to match the number set via account_pipe_buffers()
(It's unclear why watch_queue_set_size() does not update nr_accounted;
it may be due to intentional overprovisioning in watch_queue_set_size()?)
Fixes: e95aada4cb ("pipe: wakeup wr_wait after setting max_usage")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/206682a8-0604-49e5-8224-fdbe0c12b460@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull scheduler fix from Ingo Molnar:
"Prevent cond_resched() based preemption when interrupts are disabled,
on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels"
* tag 'sched-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Prevent rescheduling when interrupts are disabled
Pull perf event fixes from Ingo Molnar:
"Miscellaneous perf events fixes and a minor HW enablement change:
- Fix missing RCU protection in perf_iterate_ctx()
- Fix pmu_ctx_list ordering bug
- Reject the zero page in uprobes
- Fix a family of bugs related to low frequency sampling
- Add Intel Arrow Lake U CPUs to the generic Arrow Lake RAPL support
table
- Fix a lockdep-assert false positive in uretprobes"
* tag 'perf-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Remove too strict lockdep_assert() condition in hprobe_expire()
perf/x86/rapl: Add support for Intel Arrow Lake U
perf/x86/intel: Use better start period for frequency mode
perf/core: Fix low freq setting via IOC_PERIOD
perf/x86: Fix low freqency setting issue
uprobes: Reject the shared zeropage in uprobe_write_opcode()
perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list
perf/core: Add RCU read lock protection to perf_iterate_ctx()
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
iommu shared branch with iommufd
The three dependent series on a shared branch:
- Change the iommufd fault handle into an always present hwpt handle in
the domain
- Give iommufd its own SW_MSI implementation along with some IRQ layer
rework
- Improvements to the handle attach API
The following commands causes a crash:
~# cd /sys/kernel/tracing/events/rcu/rcu_callback
~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=bad:keys=common_pid' > trigger
Because the following occurs:
event_trigger_write() {
trigger_process_regex() {
event_hist_trigger_parse() {
data = event_trigger_alloc(..);
event_trigger_register(.., data) {
cmd_ops->reg(.., data, ..) [hist_register_trigger()] {
data->ops->init() [event_hist_trigger_init()] {
save_named_trigger(name, data) {
list_add(&data->named_list, &named_triggers);
}
}
}
}
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250227163944.1c37f85f@gandalf.local.home
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Closes: https://lore.kernel.org/all/CAP4=nvTsxjckSBTz=Oe_UYh8keD9_sZC4i++4h72mJLic4_W4A@mail.gmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
Due to this recent commit in the x86 tree:
9d7de2aa8b ("Use relative percpu offsets")
percpu addresses went from positive offsets from the GSBASE to negative
kernel virtual addresses. The BPF verifier has an optimization for
x86-64 that loads the address of cpu_number into a register, but was only
doing a 32-bit load which truncates negative addresses.
Change it to a 64-bit load so that the address is properly sign-extended.
Fixes: 9d7de2aa8b ("Use relative percpu offsets")
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250227195302.1667654-1-brgerst@gmail.com
Some filesystems, such as NFS, cifs, ceph, and fuse, do not have
complete control of sequencing on the actual filesystem (e.g. on a
different server) and may find that the inode created for a mkdir
request already exists in the icache and dcache by the time the mkdir
request returns. For example, if the filesystem is mounted twice the
directory could be visible on the other mount before it is on the
original mount, and a pair of name_to_handle_at(), open_by_handle_at()
calls could instantiate the directory inode with an IS_ROOT() dentry
before the first mkdir returns.
This means that the dentry passed to ->mkdir() may not be the one that
is associated with the inode after the ->mkdir() completes. Some
callers need to interact with the inode after the ->mkdir completes and
they currently need to perform a lookup in the (rare) case that the
dentry is no longer hashed.
This lookup-after-mkdir requires that the directory remains locked to
avoid races. Planned future patches to lock the dentry rather than the
directory will mean that this lookup cannot be performed atomically with
the mkdir.
To remove this barrier, this patch changes ->mkdir to return the
resulting dentry if it is different from the one passed in.
Possible returns are:
NULL - the directory was created and no other dentry was used
ERR_PTR() - an error occurred
non-NULL - this other dentry was spliced in
This patch only changes file-systems to return "ERR_PTR(err)" instead of
"err" or equivalent transformations. Subsequent patches will make
further changes to some file-systems to return a correct dentry.
Not all filesystems reliably result in a positive hashed dentry:
- NFS, cifs, hostfs will sometimes need to perform a lookup of
the name to get inode information. Races could result in this
returning something different. Note that this lookup is
non-atomic which is what we are trying to avoid. Placing the
lookup in filesystem code means it only happens when the filesystem
has no other option.
- kernfs and tracefs leave the dentry negative and the ->revalidate
operation ensures that lookup will be called to correctly populate
the dentry. This could be fixed but I don't think it is important
to any of the users of vfs_mkdir() which look at the dentry.
The recommendation to use
d_drop();d_splice_alias()
is ugly but fits with current practice. A planned future patch will
change this.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250227013949.536172-2-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The commit b824766504 ("cgroup/rstat: add force idle show helper")
retrieves forceidle_time outside cgroup_rstat_lock for non-root cgroups
which can be potentially inconsistent with other stats.
Rather than reverting that commit, fix it in a way that retains the
effort of cleaning up the ifdef-messes.
Fixes: b824766504 ("cgroup/rstat: add force idle show helper")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that cpumap uses GRO, which drops unused skb heads to the NAPI
cache, use napi_skb_cache_get_bulk() to try to reuse cached entries
and lower MM layer pressure. Always disable the BH before checking and
running the cpumap-pinned XDP prog and don't re-enable it in between
that and allocating an skb bulk, as we can access the NAPI caches only
from the BH context.
The better GRO aggregates packets, the less new skbs will be allocated.
If an aggregated skb contains 16 frags, this means 15 skbs were returned
to the cache, so next 15 skbs will be built without allocating anything.
The same trafficgen UDP GRO test now shows:
GRO off GRO on
threaded GRO 2.3 4 Mpps
thr bulk GRO 2.4 4.7 Mpps
diff +4 +17 %
Comparing to the baseline cpumap:
baseline 2.7 N/A Mpps
thr bulk GRO 2.4 4.7 Mpps
diff -11 +74 %
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
cpumap still uses linked lists to store a list of skbs to pass to the
stack. Now that we don't use listified Rx in favor of
napi_gro_receive(), linked list is now an unneeded overhead.
Inside the polling loop, we already have an array of skbs. Let's reuse
it for skbs passed to cpumap (generic XDP) and keep there in case of
XDP_PASS when a program is installed to the map itself. Don't list
regular xdp_frames after converting them to skbs as well; store them
in the mentioned array (but *before* generic skbs as the latters have
lower priority) and call gro_receive_skb() for each array element after
they're done.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
cpumap has its own BH context based on kthread. It has a sane batch
size of 8 frames per one cycle.
GRO can be used here on its own. Adjust cpumap calls to the upper stack
to use GRO API instead of netif_receive_skb_list() which processes skbs
by batches, but doesn't involve GRO layer at all.
In plenty of tests, GRO performs better than listed receiving even
given that it has to calculate full frame checksums on the CPU.
As GRO passes the skbs to the upper stack in the batches of
@gro_normal_batch, i.e. 8 by default, and skb->dev points to the
device where the frame comes from, it is enough to disable GRO
netdev feature on it to completely restore the original behaviour:
untouched frames will be being bulked and passed to the upper stack
by 8, as it was with netif_receive_skb_list().
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on
future loaded modules") allows user to set a tprobe on non-exist
tracepoint but it does not check the tracepoint name is acceptable.
So it leads tprobe has a wrong character for events (e.g. with
subsystem prefix). In this case, the event is not shown in the
events directory.
Reject such invalid tracepoint name.
The tracepoint name must consist of alphabet or digit or '_'.
Link: https://lore.kernel.org/all/174055073461.4079315.15875502830565214255.stgit@mhiramat.tok.corp.google.com/
Fixes: 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on future loaded modules")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Pull workqueue update from Tejun Heo:
"This contains a patch improve debug visibility.
While it isn't a fix, the change carries virtually no risk and makes
it substantially easier to chase down a class of problems"
* tag 'wq-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Log additional details when rejecting work
Pull sched_ext fix from Tejun Heo:
"pick_task_scx() has a workaround to avoid stalling when the fair
class's balance() says yes but pick_task() says no.
The workaround was incorrectly deciding to keep the prev taks running
if the task is on SCX even when the task is in a sleeping state, which
can lead to several confusing failure modes.
Fix it by testing the prev task is currently queued on SCX instead"
* tag 'sched_ext-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance()
It seems that the attr parameter was never been used in security
checks since it was first introduced by:
commit da97e18458 ("perf_event: Add support for LSM and SELinux checks")
so remove it.
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fix the following deadlock:
CPU A
_free_event()
perf_kprobe_destroy()
mutex_lock(&event_mutex)
perf_trace_event_unreg()
synchronize_rcu_tasks_trace()
There are several paths where _free_event() grabs event_mutex
and calls sync_rcu_tasks_trace. Above is one such case.
CPU B
bpf_prog_test_run_syscall()
rcu_read_lock_trace()
bpf_prog_run_pin_on_cpu()
bpf_prog_load()
bpf_tracing_func_proto()
trace_set_clr_event()
mutex_lock(&event_mutex)
Delegate trace_set_clr_event() to workqueue to avoid
such lock dependency.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250224221637.4780-1-alexei.starovoitov@gmail.com
