Initially in commit 6891c4509c memset() was required to clear a variable
allocated on stack. Commit 2482097c6c removed the on stack variable and
retained the memset() despite the fact that the memory is allocated via
kmem_cache_zalloc() and therefore zereoed already.
Drop the redundant memset().
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/Z9ctVxwaYOV4A2g4@grain
Pinned performance events can enter an error state when they fail to be
scheduled in the context due to a failed constraint or some other conflict
or condition.
In error state these events won't generate any samples anymore and are
silently ignored until they are recovered by PERF_EVENT_IOC_ENABLE,
or the condition can also change so that they can be scheduled in.
Tooling should be allowed to know about the state change, but
currently there's no mechanism to notify tooling when events enter
an error state.
One way to do this is to issue a POLLHUP event to poll(2) to handle this.
Reading events in an error state would return 0 (EOF) and it matches to
the behavior of POLLHUP according to the man page.
Tooling should remove the fd of the event from pollfd after getting
POLLHUP, otherwise it'll be returned repeatedly.
[ mingo: Clarified the changelog ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250317061745.1777584-1-namhyung@kernel.org
Patch series "reboot: support runtime configuration of emergency
hw_protection action", v3.
We currently leave the decision of whether to shutdown or reboot to
protect hardware in an emergency situation to the individual drivers.
This works out in some cases, where the driver detecting the critical
failure has inside knowledge: It binds to the system management controller
for example or is guided by hardware description that defines what to do.
This is inadequate in the general case though as a driver reporting e.g.
an imminent power failure can't know whether a shutdown or a reboot would
be more appropriate for a given hardware platform.
To address this, this series adds a hw_protection kernel parameter and
sysfs toggle that can be used to change the action from the shutdown
default to reboot. A new hw_protection_trigger API then makes use of this
default action.
My particular use case is unattended embedded systems that don't have
support for shutdown and that power on automatically when power is
supplied:
- A brief power cycle gets detected by the driver
- The kernel powers down the system and SoC goes into shutdown mode
- Power is restored
- The system remains oblivious to the restored power
- System needs to be manually power cycled for a duration long enough
to drain the capacitors
With this series, such systems can configure the kernel with
hw_protection=reboot to have the boot firmware worry about critical
conditions.
This patch (of 12):
Currently __hw_protection_shutdown() either reboots or shuts down the
system according to its shutdown argument.
To make the logic easier to follow, both inside __hw_protection_shutdown
and at caller sites, lets replace the bool parameter with an enum.
This will be extra useful, when in a later commit, a third action is added
to the enumeration.
No functional change.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-0-e1c09b090c0c@pengutronix.de
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-1-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Although the crashkernel area is reserved, on architectures like PowerPC,
it is possible for the crashkernel reserved area to contain components
like RTAS, TCE, OPAL, etc. To avoid placing kexec segments over these
components, PowerPC has its own set of APIs to locate holes in the
crashkernel reserved area.
Add an arch hook in the generic locate mem hole APIs so that architectures
can handle such special regions in the crashkernel area while locating
memory holes for kexec segments using generic APIs. With this, a lot of
redundant arch-specific code can be removed, as it performs the exact same
job as the generic APIs.
To keep the generic and arch-specific changes separate, the changes
related to moving PowerPC to use the generic APIs and the removal of
PowerPC-specific APIs for memory hole allocation are done in a subsequent
patch titled "powerpc/crash: Use generic APIs to locate memory hole for
kdump.
Link: https://lkml.kernel.org/r/20250131113830.925179-4-sourabhjain@linux.ibm.com
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "powerpc/crash: use generic crashkernel reservation", v3.
Commit 0ab97169aa ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Additionally move powerpc to use generic APIs to locate memory hole for
kexec segments while loading kdump kernel.
This patch (of 7):
kexec_elf_load() loads an ELF executable and sets the address of the
lowest PT_LOAD section to the address held by the lowest_load_addr
function argument.
To determine the lowest PT_LOAD address, a local variable lowest_addr
(type unsigned long) is initialized to UINT_MAX. After loading each
PT_LOAD, its address is compared to lowest_addr. If a loaded PT_LOAD
address is lower, lowest_addr is updated. However, setting lowest_addr to
UINT_MAX won't work when the kernel image is loaded above 4G, as the
returned lowest PT_LOAD address would be invalid. This is resolved by
initializing lowest_addr to ULONG_MAX instead.
This issue was discovered while implementing crashkernel high/low
reservation on the PowerPC architecture.
Link: https://lkml.kernel.org/r/20250131113830.925179-1-sourabhjain@linux.ibm.com
Link: https://lkml.kernel.org/r/20250131113830.925179-2-sourabhjain@linux.ibm.com
Fixes: a0458284f0 ("powerpc: Add support code for kexec_file_load()")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's very common for various tracing and profiling toolis to need to
access /proc/PID/maps contents for stack symbolization needs to learn
which shared libraries are mapped in memory, at which file offset, etc.
Currently, access to /proc/PID/maps requires CAP_SYS_PTRACE (unless we are
looking at data for our own process, which is a trivial case not too
relevant for profilers use cases).
Unfortunately, CAP_SYS_PTRACE implies way more than just ability to
discover memory layout of another process: it allows to fully control
arbitrary other processes. This is problematic from security POV for
applications that only need read-only /proc/PID/maps (and other similar
read-only data) access, and in large production settings CAP_SYS_PTRACE is
frowned upon even for the system-wide profilers.
On the other hand, it's already possible to access similar kind of
information (and more) with just CAP_PERFMON capability. E.g., setting up
PERF_RECORD_MMAP collection through perf_event_open() would give one
similar information to what /proc/PID/maps provides.
CAP_PERFMON, together with CAP_BPF, is already a very common combination
for system-wide profiling and observability application. As such, it's
reasonable and convenient to be able to access /proc/PID/maps with
CAP_PERFMON capabilities instead of CAP_SYS_PTRACE.
For procfs, these permissions are checked through common mm_access()
helper, and so we augment that with cap_perfmon() check *only* if
requested mode is PTRACE_MODE_READ. I.e., PTRACE_MODE_ATTACH wouldn't be
permitted by CAP_PERFMON. So /proc/PID/mem, which uses
PTRACE_MODE_ATTACH, won't be permitted by CAP_PERFMON, but /proc/PID/maps,
/proc/PID/environ, and a bunch of other read-only contents will be
allowable under CAP_PERFMON.
Besides procfs itself, mm_access() is used by process_madvise() and
process_vm_{readv,writev}() syscalls. The former one uses
PTRACE_MODE_READ to avoid leaking ASLR metadata, and as such CAP_PERFMON
seems like a meaningful allowable capability as well.
process_vm_{readv,writev} currently assume PTRACE_MODE_ATTACH level of
permissions (though for readv PTRACE_MODE_READ seems more reasonable, but
that's outside the scope of this change), and as such won't be affected by
this patch.
Link: https://lkml.kernel.org/r/20250127222114.1132392-1-andrii@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
rw_semaphore is a sizable structure of 40 bytes and consumes considerable
space for each vm_area_struct. However vma_lock has two important
specifics which can be used to replace rw_semaphore with a simpler
structure:
1. Readers never wait. They try to take the vma_lock and fall back to
mmap_lock if that fails.
2. Only one writer at a time will ever try to write-lock a vma_lock
because writers first take mmap_lock in write mode. Because of these
requirements, full rw_semaphore functionality is not needed and we can
replace rw_semaphore and the vma->detached flag with a refcount
(vm_refcnt).
When vma is in detached state, vm_refcnt is 0 and only a call to
vma_mark_attached() can take it out of this state. Note that unlike
before, now we enforce both vma_mark_attached() and vma_mark_detached() to
be done only after vma has been write-locked. vma_mark_attached() changes
vm_refcnt to 1 to indicate that it has been attached to the vma tree.
When a reader takes read lock, it increments vm_refcnt, unless the top
usable bit of vm_refcnt (0x40000000) is set, indicating presence of a
writer. When writer takes write lock, it sets the top usable bit to
indicate its presence. If there are readers, writer will wait using newly
introduced mm->vma_writer_wait. Since all writers take mmap_lock in write
mode first, there can be only one writer at a time. The last reader to
release the lock will signal the writer to wake up. refcount might
overflow if there are many competing readers, in which case read-locking
will fail. Readers are expected to handle such failures.
In summary:
1. all readers increment the vm_refcnt;
2. writer sets top usable (writer) bit of vm_refcnt;
3. readers cannot increment the vm_refcnt if the writer bit is set;
4. in the presence of readers, writer must wait for the vm_refcnt to drop
to 1 (plus the VMA_LOCK_OFFSET writer bit), indicating an attached vma
with no readers;
5. vm_refcnt overflow is handled by the readers.
While this vm_lock replacement does not yet result in a smaller
vm_area_struct (it stays at 256 bytes due to cacheline alignment), it
allows for further size optimization by structure member regrouping to
bring the size of vm_area_struct below 192 bytes.
[surenb@google.com: fix a crash due to vma_end_read() that should have been removed]
Link: https://lkml.kernel.org/r/20250220200208.323769-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250213224655.1680278-13-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull tracing fix from Steven Rostedt:
"Fix ref count of trace_array in error path of histogram file open
Tracing instances have a ref count to keep them around while files
within their directories are open. This prevents them from being
deleted while they are used.
The histogram code had some files that needed to take the ref count
and that was added, but the error paths did not decrement the ref
counts. This caused the instances from ever being removed if a
histogram file failed to open due to some error"
* tag 'trace-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Correct the refcount if the hist/hist_debug file fails to open
When there are no special fields in the map value, there is no need to
invoke bpf_obj_free_fields(). Therefore, checking the validity of
map->record in advance.
After the change, the benchmark result of the per-cpu update case in
map_perf_test increased by 40% under a 16-CPU VM.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250315150930.1511727-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Modpost complains when extra warnings are enabled:
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/bpf/preload/bpf_preload.o
Add a description from the Kconfig help text.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250310134920.4123633-1-arnd@kernel.org
----
Not sure if that description actually fits what the module does. If not,
please add a different description instead.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Certain bpf syscall subcommands are available for usage from both
userspace and the kernel. LSM modules or eBPF gatekeeper programs may
need to take a different course of action depending on whether or not
a BPF syscall originated from the kernel or userspace.
Additionally, some of the bpf_attr struct fields contain pointers to
arbitrary memory. Currently the functionality to determine whether or
not a pointer refers to kernel memory or userspace memory is exposed
to the bpf verifier, but that information is missing from various LSM
hooks.
Here we augment the LSM hooks to provide this data, by simply passing
a boolean flag indicating whether or not the call originated in the
kernel, in any hook that contains a bpf_attr struct that corresponds
to a subcommand that may be called from the kernel.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250310221737.821889-2-bboscaccy@linux.microsoft.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
may_goto instruction does not use any registers,
but in compute_insn_live_regs() it was treated as a regular
conditional jump of kind BPF_K with r0 as source register.
Thus unnecessarily marking r0 as used.
Fixes: 14c8552db6 ("bpf: simple DFA-based live registers analysis")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250305085436.2731464-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Compute may-live registers before each instruction in the program.
The register is live before the instruction I if it is read by I or
some instruction S following I during program execution and is not
overwritten between I and S.
This information would be used in the next patch as a hint in
func_states_equal().
Use a simple algorithm described in [1] to compute this information:
- define the following:
- I.use : a set of all registers read by instruction I;
- I.def : a set of all registers written by instruction I;
- I.in : a set of all registers that may be alive before I execution;
- I.out : a set of all registers that may be alive after I execution;
- I.successors : a set of instructions S that might immediately
follow I for some program execution;
- associate separate empty sets 'I.in' and 'I.out' with each instruction;
- visit each instruction in a postorder and update corresponding
'I.in' and 'I.out' sets as follows:
I.out = U [S.in for S in I.successors]
I.in = (I.out / I.def) U I.use
(where U stands for set union, / stands for set difference)
- repeat the computation while I.{in,out} changes for any instruction.
On implementation side keep things as simple, as possible:
- check_cfg() already marks instructions EXPLORED in post-order,
modify it to save the index of each EXPLORED instruction in a vector;
- represent I.{in,out,use,def} as bitmasks;
- don't split the program into basic blocks and don't maintain the
work queue, instead:
- do fixed-point computation by visiting each instruction;
- maintain a simple 'changed' flag if I.{in,out} for any instruction
change;
Measurements show that even such simplistic implementation does not
add measurable verification time overhead (for selftests, at-least).
Note on check_cfg() ex_insn_beg/ex_done change:
To avoid out of bounds access to env->cfg.insn_postorder array,
it should be guaranteed that instruction transitions to EXPLORED state
only once. Previously this was not the fact for incorrect programs
with direct calls to exception callbacks.
The 'align' selftest needs adjustment to skip computed insn/live
registers printout. Otherwise it matches lines from the live registers
printout.
[1] https://en.wikipedia.org/wiki/Live-variable_analysis
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250304195024.2478889-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor mark_fastcall_pattern_for_call() to extract a utility
function get_call_summary(). For a helper or kfunc call this function
fills the following information: {num_params, is_void, fastcall}.
This function would be used in the next patch in order to get number
of parameters of a helper or kfunc call.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250304195024.2478889-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract two utility functions:
- One BPF jump instruction uses .imm field to encode jump offset,
while the rest use .off. Encapsulate this detail as jmp_offset()
function.
- Avoid duplicating instruction printing callback definitions by
defining a verbose_insn() function, which disassembles an
instruction into the verifier log while hiding this detail.
These functions will be used in the next patch.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250304195024.2478889-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce BPF instructions with load-acquire and store-release
semantics, as discussed in [1]. Define 2 new flags:
#define BPF_LOAD_ACQ 0x100
#define BPF_STORE_REL 0x110
A "load-acquire" is a BPF_STX | BPF_ATOMIC instruction with the 'imm'
field set to BPF_LOAD_ACQ (0x100).
Similarly, a "store-release" is a BPF_STX | BPF_ATOMIC instruction with
the 'imm' field set to BPF_STORE_REL (0x110).
Unlike existing atomic read-modify-write operations that only support
BPF_W (32-bit) and BPF_DW (64-bit) size modifiers, load-acquires and
store-releases also support BPF_B (8-bit) and BPF_H (16-bit). As an
exception, however, 64-bit load-acquires/store-releases are not
supported on 32-bit architectures (to fix a build error reported by the
kernel test robot).
An 8- or 16-bit load-acquire zero-extends the value before writing it to
a 32-bit register, just like ARM64 instruction LDARH and friends.
Similar to existing atomic read-modify-write operations, misaligned
load-acquires/store-releases are not allowed (even if
BPF_F_ANY_ALIGNMENT is set).
As an example, consider the following 64-bit load-acquire BPF
instruction (assuming little-endian):
db 10 00 00 00 01 00 00 r0 = load_acquire((u64 *)(r1 + 0x0))
opcode (0xdb): BPF_ATOMIC | BPF_DW | BPF_STX
imm (0x00000100): BPF_LOAD_ACQ
Similarly, a 16-bit BPF store-release:
cb 21 00 00 10 01 00 00 store_release((u16 *)(r1 + 0x0), w2)
opcode (0xcb): BPF_ATOMIC | BPF_H | BPF_STX
imm (0x00000110): BPF_STORE_REL
In arch/{arm64,s390,x86}/net/bpf_jit_comp.c, have
bpf_jit_supports_insn(..., /*in_arena=*/true) return false for the new
instructions, until the corresponding JIT compiler supports them in
arena.
[1] https://lore.kernel.org/all/20240729183246.4110549-1-yepeilin@google.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/a217f46f0e445fbd573a1a024be5c6bf1d5fe716.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement support in the verifier for replacing may_goto implementation
from a counter-based approach to one which samples time on the local CPU
to have a bigger loop bound.
We implement it by maintaining 16-bytes per-stack frame, and using 8
bytes for maintaining the count for amortizing time sampling, and 8
bytes for the starting timestamp. To minimize overhead, we need to avoid
spilling and filling of registers around this sequence, so we push this
cost into the time sampling function 'arch_bpf_timed_may_goto'. This is
a JIT-specific wrapper around bpf_check_timed_may_goto which returns us
the count to store into the stack through BPF_REG_AX. All caller-saved
registers (r0-r5) are guaranteed to remain untouched.
The loop can be broken by returning count as 0, otherwise we dispatch
into the function when the count drops to 0, and the runtime chooses to
refresh it (by returning count as BPF_MAX_TIMED_LOOPS) or returning 0
and aborting the loop on next iteration.
Since the check for 0 is done right after loading the count from the
stack, all subsequent cond_break sequences should immediately break as
well, of the same loop or subsequent loops in the program.
We pass in the stack_depth of the count (and thus the timestamp, by
adding 8 to it) to the arch_bpf_timed_may_goto call so that it can be
passed in to bpf_check_timed_may_goto as an argument after r1 is saved,
by adding the offset to r10/fp. This adjustment will be arch specific,
and the next patch will introduce support for x86.
Note that depending on loop complexity, time spent in the loop can be
more than the current limit (250 ms), but imposing an upper bound on
program runtime is an orthogonal problem which will be addressed when
program cancellations are supported.
The current time afforded by cond_break may not be enough for cases
where BPF programs want to implement locking algorithms inline, and use
cond_break as a promise to the verifier that they will eventually
terminate.
Below are some benchmarking numbers on the time taken per-iteration for
an empty loop that counts the number of iterations until cond_break
fires. For comparison, we compare it against bpf_for/bpf_repeat which is
another way to achieve the same number of spins (BPF_MAX_LOOPS). The
hardware used for benchmarking was a Sapphire Rapids Intel server with
performance governor enabled, mitigations were enabled.
+-----------------------------+--------------+--------------+------------------+
| Loop type | Iterations | Time (ms) | Time/iter (ns) |
+-----------------------------|--------------+--------------+------------------+
| may_goto | 8388608 | 3 | 0.36 |
| timed_may_goto (count=65535)| 589674932 | 250 | 0.42 |
| bpf_for | 8388608 | 10 | 1.19 |
+-----------------------------+--------------+--------------+------------------+
This gives a good approximation at low overhead while staying close to
the current implementation.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250304003239.2390751-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, check_atomic() only handles atomic read-modify-write (RMW)
instructions. Since we are planning to introduce other types of atomic
instructions (i.e., atomic load/store), extract the existing RMW
handling logic into its own function named check_atomic_rmw().
Remove the @insn_idx parameter as it is not really necessary. Use
'env->insn_idx' instead, as in other places in verifier.c.
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/6323ac8e73a10a1c8ee547c77ed68cf8eb6b90e1.1740978603.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier currently does not permit global subprog calls when a lock
is held, preemption is disabled, or when IRQs are disabled. This is
because we don't know whether the global subprog calls sleepable
functions or not.
In case of locks, there's an additional reason: functions called by the
global subprog may hold additional locks etc. The verifier won't know
while verifying the global subprog whether it was called in context
where a spin lock is already held by the program.
Perform summarization of the sleepable nature of a global subprog just
like changes_pkt_data and then allow calls to global subprogs for
non-sleepable ones from atomic context.
While making this change, I noticed that RCU read sections had no
protection against sleepable global subprog calls, include it in the
checks and fix this while we're at it.
Care needs to be taken to not allow global subprog calls when regular
bpf_spin_lock is held. When resilient spin locks is held, we want to
potentially have this check relaxed, but not for now.
Also make sure extensions freplacing global functions cannot do so
in case the target is non-sleepable, but the extension is. The other
combination is ok.
Tests are included in the next patch to handle all special conditions.
Fixes: 9bb00b2895 ("bpf: Add kfunc bpf_rcu_read_lock/unlock()")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250301151846.1552362-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently for bpf progs in a cgroup hierarchy, the effective prog array
is computed from bottom cgroup to upper cgroups (post-ordering). For
example, the following cgroup hierarchy
root cgroup: p1, p2
subcgroup: p3, p4
have BPF_F_ALLOW_MULTI for both cgroup levels.
The effective cgroup array ordering looks like
p3 p4 p1 p2
and at run time, progs will execute based on that order.
But in some cases, it is desirable to have root prog executes earlier than
children progs (pre-ordering). For example,
- prog p1 intends to collect original pkt dest addresses.
- prog p3 will modify original pkt dest addresses to a proxy address for
security reason.
The end result is that prog p1 gets proxy address which is not what it
wants. Putting p1 to every child cgroup is not desirable either as it
will duplicate itself in many child cgroups. And this is exactly a use case
we are encountering in Meta.
To fix this issue, let us introduce a flag BPF_F_PREORDER. If the flag
is specified at attachment time, the prog has higher priority and the
ordering with that flag will be from top to bottom (pre-ordering).
For example, in the above example,
root cgroup: p1, p2
subcgroup: p3, p4
Let us say p2 and p4 are marked with BPF_F_PREORDER. The final
effective array ordering will be
p2 p4 p3 p1
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250224230116.283071-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introducing bpf_dynptr_copy kfunc allowing copying data from one dynptr to
another. This functionality is useful in scenarios such as capturing XDP
data to a ring buffer.
The implementation consists of 4 branches:
* A fast branch for contiguous buffer capacity in both source and
destination dynptrs
* 3 branches utilizing __bpf_dynptr_read and __bpf_dynptr_write to copy
data to/from non-contiguous buffer
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250226183201.332713-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This reverts commit 973b710b88.
As I mentioned in the review [1], I do not believe this was the correct
fix.
Commit 41a0005128 ("kheaders: prevent `find` from seeing perl temp
files") addressed the root cause of the issue. I asked David to test
it but received no response.
Commit 973b710b88 ("kheaders: Ignore silly-rename files") merely
worked around the issue by excluding such files, rather than preventing
their creation.
I have reverted the latter commit, hoping the issue has already been
resolved by the former. If the silly-rename files come back, I will
restore this change (or preferably, investigate the root cause).
[1]: https://lore.kernel.org/lkml/CAK7LNAQndCMudAtVRAbfSfnV+XhSMDcnP-s1_GAQh8UiEdLBSg@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit eff6c8ce8d.
Hazem reported a 30% drop in UnixBench spawn test with commit
eff6c8ce8d ("sched/core: Reduce cost of sched_move_task when config
autogroup") on a m6g.xlarge AWS EC2 instance with 4 vCPUs and 16 GiB RAM
(aarch64) (single level MC sched domain):
https://lkml.kernel.org/r/20250205151026.13061-1-hagarhem@amazon.com
There is an early bail from sched_move_task() if p->sched_task_group is
equal to p's 'cpu cgroup' (sched_get_task_group()). E.g. both are
pointing to taskgroup '/user.slice/user-1000.slice/session-1.scope'
(Ubuntu '22.04.5 LTS').
So in:
do_exit()
sched_autogroup_exit_task()
sched_move_task()
if sched_get_task_group(p) == p->sched_task_group
return
/* p is enqueued */
dequeue_task() \
sched_change_group() |
task_change_group_fair() |
detach_task_cfs_rq() | (1)
set_task_rq() |
attach_task_cfs_rq() |
enqueue_task() /
(1) isn't called for p anymore.
Turns out that the regression is related to sgs->group_util in
group_is_overloaded() and group_has_capacity(). If (1) isn't called for
all the 'spawn' tasks then sgs->group_util is ~900 and
sgs->group_capacity = 1024 (single CPU sched domain) and this leads to
group_is_overloaded() returning true (2) and group_has_capacity() false
(3) much more often compared to the case when (1) is called.
I.e. there are much more cases of 'group_is_overloaded' and
'group_fully_busy' in WF_FORK wakeup sched_balance_find_dst_cpu() which
then returns much more often a CPU != smp_processor_id() (5).
This isn't good for these extremely short running tasks (FORK + EXIT)
and also involves calling sched_balance_find_dst_group_cpu() unnecessary
(single CPU sched domain).
Instead if (1) is called for 'p->flags & PF_EXITING' then the path
(4),(6) is taken much more often.
select_task_rq_fair(..., wake_flags = WF_FORK)
cpu = smp_processor_id()
new_cpu = sched_balance_find_dst_cpu(..., cpu, ...)
group = sched_balance_find_dst_group(..., cpu)
do {
update_sg_wakeup_stats()
sgs->group_type = group_classify()
if group_is_overloaded() (2)
return group_overloaded
if !group_has_capacity() (3)
return group_fully_busy
return group_has_spare (4)
} while group
if local_sgs.group_type > idlest_sgs.group_type
return idlest (5)
case group_has_spare:
if local_sgs.idle_cpus >= idlest_sgs.idle_cpus
return NULL (6)
Unixbench Tests './Run -c 4 spawn' on:
(a) VM AWS instance (m7gd.16xlarge) with v6.13 ('maxcpus=4 nr_cpus=4')
and Ubuntu 22.04.5 LTS (aarch64).
Shell & test run in '/user.slice/user-1000.slice/session-1.scope'.
w/o patch w/ patch
21005 27120
(b) i7-13700K with tip/sched/core ('nosmt maxcpus=8 nr_cpus=8') and
Ubuntu 22.04.5 LTS (x86_64).
Shell & test run in '/A'.
w/o patch w/ patch
67675 88806
CONFIG_SCHED_AUTOGROUP=y & /sys/proc/kernel/sched_autogroup_enabled equal
0 or 1.
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Hagar Hemdan <hagarhem@amazon.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314151345.275739-1-dietmar.eggemann@arm.com
Repeat calls of static_branch_enable() to an already enabled
static key introduce overhead, because it calls cpus_read_lock().
Users may frequently set the uclamp value of tasks, triggering
the repeat enabling of the sched_uclamp_used static key.
Optimize this and avoid repeat calls to static_branch_enable()
by checking whether it's enabled already.
[ mingo: Rewrote the changelog for legibility ]
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250219093747.2612-2-xuewen.yan@unisoc.com
