Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
Signed-off-by: Len Brown <len.brown@intel.com>
Create "pct_idle" counter group, the sofware notion of residency
so it can now be singled out, independent of other counter groups.
Create "cpuidle" group, the cpuidle invocation counts.
Disable "cpuidle", by default.
Create "swidle" = "cpuidle" + "pct_idle".
Undocument "sysfs", the old name for "swidle", but keep it working
for backwards compatibilty.
Create "hwidle", all the HW idle counters
Modify "idle", enabled by default
"idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle")
Signed-off-by: Len Brown <len.brown@intel.com>
Probe cpuidle "sysfs" residency and counts separately,
since soon we will make one disabled on, and the
other disabled off.
Clarify that some BIC (build-in-counters) are actually "groups".
since we're about to re-name some of those groups.
no functional change.
Signed-off-by: Len Brown <len.brown@intel.com>
Do fflush() to discard the buffered data, before each read of the
graphics sysfs knobs.
Fixes: ba99a4fc8c ("tools/power turbostat: Remove unnecessary fflush() call")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Document that on Intel Granite Rapids Systems,
Uncore domains 0-2 are CPU domains, and
uncore domains 3-4 are IO domains.
Signed-off-by: Len Brown <len.brown@intel.com>
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053f ("turbostat: Support thermal throttle count print")
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
# turbostat -c 1100-1151
"--cpu 1100-1151" malformed
...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
This version has fix for:
- Display of die ID and optimize array size for multi package
systems.
- Fix build warning with cross compiler
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
This helps when using a cross-compiler for building intel-speed-select,
currently, its hardcoded to pick libnl3 headers from build host which may
not be same as build target when cross compiling.
cc -print-sysroot will print nothing if compiler is configured without
a sysroot and result in same string as it is now.
Fixes errors with gcc configured with host include poisoning e.g.
cc1: error: include location "/usr/include/libnl3" is unsafe for
cross-compilation [-Werror=poison-system-directories]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
[ srinivas: Changelog edits for checkpatch warning ]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Even when there is no die exported by CPUID leaf 0x1F, the kernel version
after 6.9 will show non zero die_id in the sysfs. In that case maximum
die_id can still match maximum power domain ID. So the condition to check
if the power domain ID is same a die_id to prevent duplicate display
doesn't hold true.
The better condition is to check if the maximum die_id is more than the
maximum package_id. If the die_id is exposed by CPUID leaf 0x1F, the
maximum die_id will be more than maximum package_id.
With this change tracking of max_punit_id is not used, so remove storing
max_punit_id.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
In the function for_each_online_power_domain_in_set() to pick one CPU
from each power domain a three-dimensional array is used, which assumes
that a package contains multiple dies, that means the die_id from
/sys/devices/system/cpu/cpu0/topology/die_id is only local to package.
If it is not unique, still there will be no functional issues in the
current generation of products, but the MAX_DIE_PER_PACKAGE will need to
be increased for future products with many packages.
After kernel version 6.9 die ID is unique system wide not per package.
Even if the CPU topology has no dies, the ID will still increment across
package. In this case the die_id in package 0 will be 0 and die_id in
package 1 will be 1 in a 2-package system.
Since the die count must be same for packages, just count the number of
dies in package 0 and calculate die index from
/sys/devices/system/cpu/cpu0/topology/die_id which is only unique within
a package.
In this way the array size
"int cpus[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE][MAX_PUNIT_PER_DIE]"
doesn't have to increase with increasing package count.
No functional change is expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The idle governor provides the following per-idle state sysfs files:
* above - Indicates overshoots, where a more shallow state should have
been requested (if avaliale and enabled).
* below - Indicates undershoots, where a deeper state should have been
requested (if available and enabled).
These files offer valuable insights into how effectively the Linux kernel
idle governor selects idle states for a given workload. This commit adds
support for these files in turbostat.
Expose the contents of these files with the following naming convention:
* C1: The number of times the C1 state was requested (existing counter).
* C1+: The number of times the idle governor selected C1, but a deeper
idle state should have been selected instead.
* C1-: The number of times the idle governor selected C1, but a shallower
idle state should have been selected instead.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix the 'find_msrp_by_name()' function which returns incorrect matches for
cases like this:
s1 = "C1-";
find_msrp_by_name(head, s1);
Inside 'find_msrp_by_name()':
...
s2 = "C1"
if !(strcnmp(s1, s2, len(s2)))
// Incorrect match!
return mp;
Full strings should be match istead. Switch to 'strcmp()' to fix the problem.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat aborted with below messages on a dual-package system,
turbostat: turbostat.c:3744: rapl_counter_accumulate: Assertion `dst->unit == src->unit' failed.
Aborted
This is because
1. the MSR_DRAM_PERF_STATUS returns Zero for one package, and non-Zero
for another package
2. probe_msr() treats Zero return value as a failure so this feature is
enabled on one package, and disabled for another package.
3. turbostat aborts because the feature is invalid on some package
Unlike the RAPL energy counter registers, MSR_DRAM_PERF_STATUS can
return Zero value, and this should not be treated as a failure.
Fix the problem by allowing Zero return value for RAPL registers other
than the energy counters.
Fixes: 7c6fee25bd ("tools/power turbostat: Check for non-zero value when MSR probing")
Reported-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The clustered uncore frequency counters, UMHz*.*
should honor the --show and --hide options.
All non-specified counters should be implicityly hidden.
But when --show was used, UMHz*.* showed up anyway:
$ sudo turbostat -q -S --show Busy%
Busy% UMHz0.0 UMHz1.0 UMHz2.0 UMHz3.0 UMHz4.0
Indeed, there was no string that can be used to explicitly
show or hide clustered uncore counters.
Even through they are dynamically probed and added,
group the clustered UMHz*.* counters with the legacy
built-in-counter "UncMHz" for show/hide.
turbostat --show Busy%
does not show UMHz*.*.
turbostat --show UncMHz
shows either UncMHz or UMHz*.*, if present
turbostat --hide UncMHz
hides either UncMHz or UMHz*.*, if present
Reported-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
Intel Clearwater Forest report PMT telemetry with GUID 0x14421519, which
can be used to obtain module c1e residency counter of type tcore clock.
Add early support for the counter by using heuristic that should work
for the Clearwater Forest platforms.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
when turbostat interval mode can't migrate to a CPU, it complains,
prints no data, re-initializes with the new CPU configuration
and starts a new interval.
But this strategy in the face of a CPU hotplug offline during an interval
doesn't help in one-shot mode. When the missing CPU is discovered
at the end of the interval, the forked program has already returned
and there is nothing left for a new interval to measure.
So instead of aborting get_coutners() and delta_cpu() if a missing CPU
is detected, complain, but carry on and output what statistics are
actually present.
Use the same strategy for delta_cpu when aperf:mperf are observed
to have been reset -- complain, but carry on and print data for
the CPUs that are still present.
Interval mode error handling is unchanged.
One-shot mode can now do this:
$ sudo chcpu -e 1 ; sudo ./turbostat --quiet --show PkgWatt,Busy%,CPU chcpu -d 1
CPU 1 enabled
CPU 1 disabled
get_counters: Could not migrate to CPU 1
./turbostat: Counter reset detected
0.036920 sec
CPU Busy% PkgWatt
- 0.00 10.00
0 99.73 10.00
1 0.00
2 91.53
3 16.83
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
In "one-shot" mode, turbostat
1. takes a counter snapshot
2. forks and waits for a child
3. takes the end counter snapshot and prints the result.
But turbostat counter snapshots currently use affinity to travel
around the system so that counter reads are "local", and this
affinity must be cleared between #1 and #2 above.
The offending commit removed that reset that allowed the child
to run on cpu_present_set.
Fix that issue, and improve upon the original by using
cpu_possible_set for the child. This allows the child
to also run on CPUs that hotplug online during its runtime.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Fixes: 7bb3fe27ad ("tools/power/turbostat: Obey allowed CPUs during startup")
Signed-off-by: Len Brown <len.brown@intel.com>
Some PMT counters, for example module c1e residency on Intel Clearwater
Forest, are reported using tcore clock type.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix checkpatch whitespace issues since 2024.11.30
Summary of Changes since 2024.11.30:
Enable SysWatt by default.
Add initial PTL, CWF platform support.
Refuse to run on unsupported platforms without --force
to avoid not-so-useful measurements mistakenly made
using obsolete versions.
Harden initial PMT code in response to early use.
Signed-off-by: Len Brown <len.brown@intel.com>
Allow user to add PMT counters by either identifying the source with:
guid=%u,seq=%u
or, since this patch, with direct sysfs path:
path=%s, for example path=/sys/class/intel_pmt/telem5
In the later case, the guid and sequence number will be infered
by turbostat.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some platforms may expose multiple telemetry files identified with the
same GUID. Interpreting it correctly, to associate given counter with a
CPU, core or a package requires more metadata from the user.
Parse and create ordered, linked list of those PMT aggregators, so that
we can identify specific aggregator with GUID + sequence number.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
PMT directories exposed in sysfs use the following pattern:
telem%u
for example:
telem0, telem2, telem3, ..., telem15, telem16
This naming scheme preserves the ordering from the PCIe discovery, which
is important to correctly map the telemetry directory to the specific
domain (cpu, core, package etc).
Because readdir() traverses the entries in alphabetical order, causing
for example "telem13" to be traversed before "telem3", it is necessary
to use scandir() with custom compare() callback to preserve the PCIe
ordering.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When platforms expose multiple PMT aggregators with the same GUID, the
only way to identify them and map to specific domain is by reading them
in an order they were exposed via PCIe. Intel PMT kernel driver does
keep the same order and numbers the telemetry directories accordingly.
Use GUID and sequence number (order) to uniquely identify PMT
aggregators.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When requesting PMT counters with --add command, user may want to skip
specifying values for all the domains (that is, cpu, core, package etc).
For the domains that user did not provide information on how to read the
counter, return default value - zero.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
For some MSRs, for example, the Platform Energy Counter (RAPL PSYS), it
is required to additionally check for a non-zero value to confirm that
it is present.
From Intel SDM vol. 4:
Platform Energy Counter (R/O)
This MSR is valid only if both platform vendor hardware
implementation and BIOS enablement support it.
This MSR will read 0 if not valid.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Include procfs and sysfs data collection time in the system summary
row of the "usec" column. This is useful for isolating where the
time goes during turbostat data collection.
Background:
Column "usec" shows
1. the number of microseconds elapsed during counter collection,
including thread migration -- if any, for each CPU row.
2. total elapsed time to collect the counters on all cpus, for the
summary row.
This can be used to check the time cost of a give column. For example,
run below commands separately
turbostat --show usec sleep 1
turbostat --show usec,CoreTmp sleep 1
and the delta in the usec column will tell the time cost for CoreTmp
(Thermal MSR read)
Problem:
Some of the kernel procfs/sysfs accesses are expensive, especially on
high core count systems. "usec" column cannot tell this because it only
includes the time cost of the counters.
Solution:
Leave the per CPU "usec" as it is and modify the summary "usec" to
include the time cost of the procfs/sysfs snapshot.
With it, the "usec" column can be used to get
1. the baseline, e.g.
turbostat --show usec sleep 1
2. the baseline + some per CPU counter cost, e.g.
turbostat --show usec,CoreTmp sleep 1
3. the baseline + some per CPU sysfs cost, e.g.
turbostat --show usec,C1 sleep 1
4. the baseline + /proc/interrupts cost, e.g
turbostat --show usec,IRQ sleep 1
Man-page update is also included.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Intel Sapphire Rapids is an exception and has fixed divisor for RAPL PSYS
counter set to 1.0. Add a platform bit and enable it for SPR.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This (the old code) is just not how you round up to a page size.
Noticed on a recent Intel platform. Previous ones must have been
reporting sizes already aligned to a page and so the bug was missed when
testing.
Fixes: f0e4ed752f ("tools/power turbostat: Add early support for PMT counters")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The counter is present on most supporting Intel platforms and provides
useful data to the user. There is no reason to disable the counter by
default.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add an NMI column, a proper sub-set of the IRQ column.
It would be preferable if the kernel exported
/sys/kernel/irq/NMI/per_cpu_count.
But since we are already forced to parse /proc/interrupts,
noticing which row is the NMI is simple enough.
Suggested-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When SST-TF is disabled, the TRL (Turbo Ratio Limit) of config level 0
is getting restored. But the TRL of current level should be restored
which may not be config level 0.
This is caused by a bug in treating config level as TRL level. So
arguments needs to be swapped.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Turbostat currently exits under the following conditions:
1. When running on non-Intel/AMD/Hygon x86 vendors.
2. When running on Intel models that lack specific platform features.
Introduce a new `--force` parameter that allows turbostat to run on
these unsupported platforms with minimal default feature support. This
provides users with the flexibility to gather basic information even on
unsupported systems.
[lenb: updated warning message text]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Improve the `--help` output of turbostat by standardizing the format
and enhancing readability. The following changes are made to ensure
consistency and clarity in the help message:
1. Use a consistent pattern for each parameter's help message:
- Display the parameter and its input (if any) on the same line,
separated by a space.
- Provide the detailed description on a separate line.
2. Ensure that the first character of each description is in lower-case.
These changes make the help output more uniform and easier to read,
helping users quickly understand the available options and their usage.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat currently supports x86 processors from Intel, AMD, and Hygon.
The behavior of turbostat on CPUs from other vendors has not been
evaluated and may lead to incorrect or undefined behavior.
Enhance turbostat to exit by default when running on an unsupported CPU
vendor. This ensures that users are aware that their CPU is not
currently supported by turbostat, guiding them to seek support for their
specific hardware through future patches.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat requires per-platform enabling for Intel CPU models due to
platform-specific features. When running on unsupported Intel CPU
models, turbostat currently operates with limited default features,
which can lead to users unknowingly using an outdated version of the
tool.
Enhance turbostat to exit by default when run on unsupported Intel CPU
models, with a clear message to users, informing them that their CPU
model is not supported and advising them to update to the latest version
of turbostat for full functionality.
[lenb: updated error message wording]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add initial support for ClearwaterForest.
It shares the same features with SierraForest.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add initial support for PantherLake.
It shares the same features with Lunarlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
since 2024.07.26:
assorted minor bug fixes
assorted platform specific tweaks
initial RAPL PSYS (SysWatt) support
Signed-off-by: Len Brown <len.brown@intel.com>
Introduce the counter as a part of global, platform counters structure.
We open the counter for only one cpu, but otherwise treat it as an
ordinary RAPL counter, allowing for grouped perf read.
The counter is disabled by default, because it's interpretation may
require additional, platform specific information, making it unsuitable
for general use.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add '+' to optstring when early scanning for --no-msr and --no-perf.
It causes option processing to stop as soon as a nonoption argument is
encountered, effectively skipping child's arguments.
Fixes: 3e4048466c ("tools/power turbostat: Add --no-msr option")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
