Now that the per-VM, on-demand allocation logic in kvm_setup_gdt() and
vcpu_init_descriptor_tables() is gone, fold them into vcpu_init_sregs().
Note, both kvm_setup_gdt() and vcpu_init_descriptor_tables() configured the
GDT, which is why it looks like kvm_setup_gdt() disappears.
Opportunistically delete the pointless zeroing of the IDT limit (it was
being unconditionally overwritten by vcpu_init_descriptor_tables()).
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace the switch statement on vm->mode in x86's vcpu_init_sregs()'s with
a simple assert that the VM has a 48-bit virtual address space. A switch
statement is both overkill and misleading, as the existing code incorrectly
implies that VMs with LA57 would need different to configuration for the
LDT, TSS, and flat segments. In all likelihood, the only difference that
would be needed for selftests is CR4.LA57 itself.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Initialize the IDT and exception handlers for all non-barebones VMs and
vCPUs on x86. Forcing tests to manually configure the IDT just to save
8KiB of memory is a terrible tradeoff, and also leads to weird tests
(multiple tests have deliberately relied on shutdown to indicate success),
and hard-to-debug failures, e.g. instead of a precise unexpected exception
failure, tests see only shutdown.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix an off-by-one bug in the initialization of the GDT limit, which as
defined in the SDM is inclusive, not exclusive.
Note, vcpu_init_descriptor_tables() gets the limit correct, it's only
vcpu_setup() that is broken, i.e. only tests that _don't_ invoke
vcpu_init_descriptor_tables() can have problems. And the fact that KVM
effectively initializes the GDT twice will be cleaned up in the near
future.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: rewrite changelog]
Link: https://lore.kernel.org/r/20240314232637.2538648-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Effectively revert the movement of code from kvm_util.h => kvm_util_base.h,
as the TL;DR of the justification for the move was to avoid #idefs and/or
circular dependencies between what ended up being ucall_common.h and what
was (and now again, is), kvm_util.h.
But avoiding #ifdef and circular includes is trivial: don't do that. The
cost of removing kvm_util_base.h is a few extra includes of ucall_common.h,
but that cost is practically nothing. On the other hand, having a "base"
version of a header that is really just the header itself is confusing,
and makes it weird/hard to choose names for headers that actually are
"base" headers, e.g. to hold core KVM selftests typedefs.
For all intents and purposes, this reverts commit
7d9a662ed9.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a global snapshot of kvm_is_forced_emulation_enabled() and sync it to
all VMs by default so that core library code can force emulation, e.g. to
allow for easier testing of the intersections between emulation and other
features in KVM.
Link: https://lore.kernel.org/r/20240314185459.2439072-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move memstress' random bool logic into common code to avoid reinventing
the wheel for basic yes/no decisions. Provide an outer wrapper to handle
the basic/common case of just wanting a 50/50 chance of something
happening.
Link: https://lore.kernel.org/r/20240314185459.2439072-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a global guest_random_state instance, i.e. a pseudo-RNG, so that an
RNG is available for *all* tests. This will allow randomizing behavior
in core library code, e.g. x86 will utilize the pRNG to conditionally
force emulation of writes from within common guest code.
To allow for deterministic runs, and to be compatible with existing tests,
allow tests to override the seed used to initialize the pRNG.
Note, the seed *must* be overwritten before a VM is created in order for
the seed to take effect, though it's perfectly fine for a test to
initialize multiple VMs with different seeds.
And as evidenced by memstress_guest_code(), it's also a-ok to instantiate
more RNGs using the global seed (or a modified version of it). The goal
of the global RNG is purely to ensure that _a_ source of random numbers is
available, it doesn't have to be the _only_ RNG.
Link: https://lore.kernel.org/r/20240314185459.2439072-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define _GNU_SOURCE is the base CFLAGS instead of relying on selftests to
manually #define _GNU_SOURCE, which is repetitive and error prone. E.g.
kselftest_harness.h requires _GNU_SOURCE for asprintf(), but if a selftest
includes kvm_test_harness.h after stdio.h, the include guards result in
the effective version of stdio.h consumed by kvm_test_harness.h not
defining asprintf():
In file included from x86_64/fix_hypercall_test.c:12:
In file included from include/kvm_test_harness.h:11:
../kselftest_harness.h:1169:2: error: call to undeclared function
'asprintf'; ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
1169 | asprintf(&test_name, "%s%s%s.%s", f->name,
| ^
When including the rseq selftest's "library" code, #undef _GNU_SOURCE so
that rseq.c controls whether or not it wants to build with _GNU_SOURCE.
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423190308.2883084-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
It would appear that all of the selftests are using the same exact
layout for the GIC frames. Fold this back into the library
implementation to avoid defining magic values all over the selftests.
This is an extension of Colton's change, ripping out parameterization of
from the library internals in addition to the public interfaces.
Co-developed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-15-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
There are a few subtle incongruencies between the GIC definitions used
by the kernel and selftests. Furthermore, the selftests header blends
implementation detail (e.g. default priority) with the architectural
definitions.
This is all rather annoying, since bulk imports of the kernel header
is not possible. Move selftests-specific definitions out of the
offending header and realign tests on the canonical definitions for
things like sysregs. Finally, haul in a fresh copy of the gicv3 header
to enable a forthcoming ITS selftest.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-14-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Allow the caller to set the initial state of the VM. Doing this
before sev_vm_launch() matters for SEV-ES, since that is the
place where the VMSA is updated and after which the guest state
becomes sealed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes the concept of "subtypes", instead letting the tests use proper
VM types that were recently added. While the sev_init_vm() and sev_es_init_vm()
are still able to operate with the legacy KVM_SEV_INIT and KVM_SEV_ES_INIT
ioctls, this is limited to VMs that are created manually with
vm_create_barebones().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With multiple reader threads POLLing a single UFFD, the demand paging test
suffers from the thundering herd problem: performance degrades as the
number of reader threads is increased. Solve this issue [1] by switching
the the polling mechanism to EPOLL + EPOLLEXCLUSIVE.
Also, change the error-handling convention of uffd_handler_thread_fn.
Instead of just printing errors and returning early from the polling
loop, check for them via TEST_ASSERT(). "return NULL" is reserved for a
successful exit from uffd_handler_thread_fn, i.e. one triggered by a
write to the exit pipe.
Performance samples generated by the command in [2] are given below.
Num Reader Threads, Paging Rate (POLL), Paging Rate (EPOLL)
1 249k 185k
2 201k 235k
4 186k 155k
16 150k 217k
32 89k 198k
[1] Single-vCPU performance does suffer somewhat.
[2] ./demand_paging_test -u MINOR -s shmem -v 4 -o -r <num readers>
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20240215235405.368539-13-amoorthy@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
At the moment, demand_paging_test does not support profiling/testing
multiple vCPU threads concurrently faulting on a single uffd because
(a) "-u" (run test in userfaultfd mode) creates a uffd for each vCPU's
region, so that each uffd services a single vCPU thread.
(b) "-u -o" (userfaultfd mode + overlapped vCPU memory accesses)
simply doesn't work: the test tries to register the same memory
to multiple uffds, causing an error.
Add support for many vcpus per uffd by
(1) Keeping "-u" behavior unchanged.
(2) Making "-u -a" create a single uffd for all of guest memory.
(3) Making "-u -o" implicitly pass "-a", solving the problem in (b).
In cases (2) and (3) all vCPU threads fault on a single uffd.
With potentially multiple vCPUs per UFFD, it makes sense to allow
configuring the number of reader threads per UFFD as well: add the "-r"
flag to do so.
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20240215235405.368539-12-amoorthy@google.com
[sean: fix kernel style violations, use calloc() for arrays]
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM x86 PMU changes for 6.9:
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
KVM selftests changes for 6.9:
- Add macros to reduce the amount of boilerplate code needed to write "simple"
selftests, and to utilize selftest TAP infrastructure, which is especially
beneficial for KVM selftests with multiple testcases.
- Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
- Fix benign bugs where tests neglect to close() guest_memfd files.
Move vcpu_has_ext to the processor.c and rename it to __vcpu_has_ext
so that other test cases can use it for vCPU extension check.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add guest_get_vcpuid() helper to simplify accessing to per-cpu
private data. The sscratch CSR was used to store the vcpu id.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add the infrastructure for guest exception handling in riscv selftests.
Customized handlers can be enabled by vm_install_exception_handler(vector)
or vm_install_interrupt_handler().
The code is inspired from that of x86/arm64.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Extend sev_smoke_test to also run a minimal SEV-ES smoke test so that it's
possible to test KVM's unique VMRUN=>#VMEXIT path for SEV-ES guests
without needing a full blown SEV-ES capable VM, which requires a rather
absurd amount of properly configured collateral.
Punt on proper GHCB and ucall support, and instead use the GHCB MSR
protocol to signal test completion. The most important thing at this
point is to have _any_ kind of testing of KVM's __svm_sev_es_vcpu_run().
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Carlos Bilbao <carlos.bilbao@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract the code to set a vCPU's entry point out of vm_arch_vcpu_add() and
into a new API, vcpu_arch_set_entry_point(). Providing a separate API
will allow creating a KVM selftests hardness that can handle tests that
use different entry points for sub-tests, whereas *requiring* the entry
point to be specified at vCPU creation makes it difficult to create a
generic harness, e.g. the boilerplate setup/teardown can't easily create
and destroy the VM and vCPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-4-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and
'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock'
mode when either is in use. Transform 'sys_clocksource_is_tsc()' into
'sys_clocksource_is_based_on_tsc()' to support the later. This affects
two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem
to work well when system clocksource is 'hyperv_clocksource_tsc_page'.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-4-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Several existing x86 selftests need to check that the underlying system
clocksource is TSC or based on TSC but every test implements its own
check. As a first step towards unification, extract check_clocksource()
from kvm_clock_test and split it into two functions: arch-neutral
'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'.
Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in
check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE().
The change also makes the test fail when system clocksource can't be read
from sysfs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-2-vkuznets@redhat.com
[sean: eliminate if-elif pattern just to set a bool true]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to read integer module params, which is painfully non-trivial
because the pain of dealing with strings in C is exacerbated by the kernel
inserting a newline.
Don't bother differentiating between int, uint, short, etc. They all fit
in an int, and KVM (thankfully) doesn't have any integer params larger
than an int.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-24-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
open_path_or_exit() is used for '/dev/kvm', '/dev/sev', and
'/sys/module/%s/parameters/%s' and skipping test when the entry is missing
is completely reasonable. Other errors, however, may indicate a real issue
which is easy to miss. E.g. when 'hyperv_features' test was entering an
infinite loop the output was:
./hyperv_features
Testing access to Hyper-V specific MSRs
1..0 # SKIP - /dev/kvm not available (errno: 24)
and this can easily get overlooked.
Keep ENOENT case 'special' for skipping tests and fail when open() results
in any other errno.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240129085847.2674082-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM/arm64 updates for Linux 6.8
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
