When running diag.sh in a loop, chk_dump_one will report the following
"grep: write error":
13 ....chk 2 cestab [ OK ]
grep: write error
14 ....chk dump_one [ OK ]
15 ....chk 2->0 msk in use after flush [ OK ]
16 ....chk 2->0 cestab after flush [ OK ]
This error is caused by a broken pipe. When the output of 'ss' is processed
by grep, 'head -n 1' will exit immediately after getting the first line,
causing the subsequent pipe to close. At this time, if 'grep' is still
trying to write data to the closed pipe, it will trigger a SIGPIPE signal,
causing a write error.
One solution is not to use this problematic "head -n 1" command, but to use
mptcp_lib_get_info_value() helper defined in mptcp_lib.sh to get the value
of 'token'.
Fixes: ba24001665 ("selftests: mptcp: add a test for mptcp_diag_dump_one")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Gang Yan <yangang@kylinos.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250421-net-mptcp-pm-defer-freeing-v1-2-e731dc6e86b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc16632
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
mptcp Makefile currently overrides CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure, for example:
make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/mptcp/mptcp_sockopt] Error 1
/usr/bin/ld: /tmp/ccqyMVdb.o: relocation R_X86_64_32 against `.rodata.str1.8' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
Fixes: cc937dad85 ("selftests: centralize -D_GNU_SOURCE= to CFLAGS in lib.mk")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/7abc701da9df39c2d6cd15bc3cf9e6cee445cb96.1737621162.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'du' will print the name of the file, which was already displayed
before, e.g.
Created /tmp/tmp.UOyy0ghfmQ (size 4703740/tmp/tmp.UOyy0ghfmQ) containing data sent by client
Created /tmp/tmp.xq3zvFinGo (size 1391724/tmp/tmp.xq3zvFinGo) containing data sent by server
'stat' can be used instead, to display this instead:
Created /tmp/tmp.UOyy0ghfmQ (size 4703740 B) containing data sent by client
Created /tmp/tmp.xq3zvFinGo (size 1391724 B) containing data sent by server
So easier to spot the file sizes.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-6-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to unify what is printed in case of error, similar to what is
done in mptcp_connect.sh and mptcp_join.sh, it is interesting to do the
following modifications in simult_flows.sh:
- Print the rc errors at the end of the line.
- Print the MIB counters.
- Use the same ss options: add -M (MPTCP sockets) and -e (detailed
socket information).
While at it, also print of the 'max' time only in case of success,
because 'mptcp_connect.c' will already print this info in case of error,
e.g.:
transfer slower than expected! runtime 11948 ms, expected 11921 ms
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-1-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The disconnect test-case generates spurious errors:
INFO: disconnect
INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI
01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL]
file received by server does not match (in, out):
Unexpected revents: POLLERR/POLLNVAL(19)
-rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect
Trailing bytes are:
��\����R���!8��u2��5N%
-rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1
Trailing bytes are:
��\����R���!8��u2��5N%
02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ]
03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ]
04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ]
[FAIL] Tests of the full disconnection have failed
Time: 2 seconds
The root cause is actually in the user-space bits: the test program
currently disconnects as soon as all the pending data has been spooled,
generating an FASTCLOSE. If such option reaches the peer before the
latter has reached the closed status, the msk socket will report an
error to the user-space, as per protocol specification, causing the
above failure.
Address the issue explicitly waiting for all the relevant sockets to
reach a closed status before performing the disconnect.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-3-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, the net/lib.sh file has been modified to include defer.sh from
net/lib/sh/ directory. The Makefile from net/lib has been modified
accordingly, but not the ones from the sub-targets using net/lib.sh.
Because of that, the new file is not installed as expected when
installing the Forwarding, MPTCP, and Netfilter targets, e.g.
# make -C tools/testing/selftests TARGETS=net/mptcp install \
INSTALL_PATH=/tmp/kself
# cd /tmp/kself/
# ./run_kselftest.sh -c net/mptcp
TAP version 13
1..7
# timeout set to 1800
# selftests: net/mptcp: mptcp_connect.sh
# ./../lib.sh: line 5: /tmp/kself/net/lib/sh/defer.sh: No such file
or directory
# (...)
This can be fixed simply by adding all the .sh files from net/lib/sh
directory to the TEST_INCLUDES variable in the different Makefile's.
Fixes: a6e263f125 ("selftests: net: lib: Introduce deferred commands")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241104-net-next-selftests-lib-sh-deps-v1-1-7c9f7d939fc2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Listing all the values linked to the MPTCP sysctl knobs was not
exercised in MPTCP test suite.
Let's do that to avoid any regressions, but also to have a kernel with a
debug kconfig verifying more assumptions. For the moment, we are not
interested by the output, only to avoid crashes and warnings.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241021-net-mptcp-sched-lock-v1-3-637759cf061c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Explicitly verify that MPC connection attempts towards a port-based
signal endpoint fail with a reset.
Note that this new test is a bit different from the other ones, not
using 'run_tests'. It is then needed to add the capture capability, and
the picking the right port which have been extracted into three new
helpers. The info about the capture can also be printed from a single
point, which simplifies the exit paths in do_transfer().
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 1729cf186d ("mptcp: create the listening socket for new port")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-2-7faea8e6b6ae@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb2 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the previous commit, the net_helper.sh file from the parent
directory is used by the MPTCP selftests and it needs to be present when
running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
Fixes: 1af3bc912e ("selftests: mptcp: lib: use wait_local_port_listen helper")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-3-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lib.sh file from the parent directory is used by the MPTCP selftests
and it needs to be present when running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
Fixes: f265d3119a ("selftests: mptcp: lib: use setup/cleanup_ns helpers")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-2-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new endpoint using the IP of the initial subflow has been recently
added to increase the code coverage. But it breaks the test when using
old kernels not having commit 86e39e0448 ("mptcp: keep track of local
endpoint still available for each msk"), e.g. on v5.15.
Similar to commit d4c81bbb86 ("selftests: mptcp: join: support local
endpoint being tracked or not"), it is possible to add the new endpoint
conditionally, by checking if "mptcp_pm_subflow_check_next" is present
in kallsyms: this is not directly linked to the commit introducing this
symbol but for the parent one which is linked anyway. So we can know in
advance what will be the expected behaviour, and add the new endpoint
only when it makes sense to do so.
Fixes: 4878f9f842 ("selftests: mptcp: join: validate fullmesh endp on 1st sf")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-1-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is nice to have a visual alignment in the test output to present the
different results, but it makes less sense in the TAP output that is
there for computers.
It sounds then better to remove the duplicated whitespaces in the TAP
output, also because it can cause some issues with TAP parsers expecting
only one space around the directive delimiter (#).
While at it, change the variable name (result_msg) to something more
explicit.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240906-net-next-mptcp-ksft-subtest-time-v2-5-31d5ee4f3bdf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of displaying 'invert' when looking at some events like MP_FAIL,
MP_FASTCLOSE, MP_RESET, RM_ADDR, which is a bit vague because they are
not traditionnaly sent from one side, the host being checked is now
printed.
For the ADD_ADDR, only display the host when it is the client sending
it, which is more unusual.
Also before, the 'invert' message was printed after a few checks, but it
was not clear which ones exactly.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-8-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few new MPJoinSynTx MIB counters have been added in a previous commit.
They are being validated here in mptcp_join.sh selftest, each time the
number of received MPJ are checked.
Most of the time, the number of sent SYN+MPJ is the same as the received
ones. But sometimes, there are more, because there are dropped, or there
are errors.
While at it, the "no MPC reuse with single endpoint" subtest has been
modified to force a bind() error.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-6-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chk_join_nr() currently takes 9 positional parameters, 6 of them are
optional. It makes it hard to read:
chk_join_nr 1 1 1 1 0 1 1 0 4
Naming these vars helps to make it easier to read:
join_csum_ns1=1 join_csum_ns2=0 \
join_fail_nr=1 join_rst_nr=1 join_infi_nr=0 \
join_corrupted_pkts=4 \
chk_join_nr 1 1 1
It will then be easier to add new optional parameters.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-4-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.
A new helper has been introduced to easily check these events. The
missing events have been added to the lib.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b911c97c7d ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" to validate the previous commit:
when the endpoint linked to the initial subflow (ID 0) is re-added
multiple times, it was no longer being used, because the internal linked
counters are not decremented for this special endpoint: it is not an
additional endpoint.
Here, the "del/add id 0" steps are done 3 times to unsure this case is
validated.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The checksum and fail counters might not be available. Then no need to
display an extra message with missing info.
While at it, fix the indentation around, which is wrong since the same
commit.
Fixes: 47867f0a7e ("selftests: mptcp: join: skip check if MIB counter not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID, but the kernel should still use the ID 0 if it corresponds
to the initial address.
This test validates this behaviour: the endpoint linked to the initial
subflow is removed, and re-added with a different ID.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Removing the endpoint linked to the initial subflow should trigger a
RM_ADDR for the right ID, and the removal of the subflow. That's what is
now being verified in the "delete and re-add" test.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thanks to the previous commit, the MPTCP subflows are now closed on both
directions even when only the MPTCP path-manager of one peer asks for
their closure.
In the two tests modified here -- "userspace pm add & remove address"
and "userspace pm create destroy subflow" -- one peer is controlled by
the userspace PM, and the other one by the in-kernel PM. When the
userspace PM sends a RM_ADDR notification, the in-kernel PM will
automatically react by closing all subflows using this address. Now,
thanks to the previous commit, the subflows are properly closed on both
directions, the userspace PM can then no longer closes the same
subflows if they are already closed. Before, it was OK to do that,
because the subflows were still half-opened, still OK to send a RM_ADDR.
In other words, thanks to the previous commit closing the subflows, an
error will be returned to the userspace if it tries to close a subflow
that has already been closed. So no need to run this command, which mean
that the linked counters will then not be incremented.
These tests are then no longer sending both a RM_ADDR, then closing the
linked subflow just after. The test with the userspace PM on the server
side is now removing one subflow linked to one address, then sending
a RM_ADDR for another address. The test with the userspace PM on the
client side is now only removing the subflow that was previously
created.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-2-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This case was not covered, and the wrong ID was set before the previous
commit.
The rest is not modified, it is just that it will increase the code
coverage.
The right address ID can be verified by looking at the packet traces. We
could automate that using Netfilter with some cBPF code for example, but
that's always a bit cryptic. Packetdrill seems better fitted for that.
Fixes: 4f49d63352 ("selftests: mptcp: add fullmesh testcases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-13-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After having flushed endpoints that didn't cause the creation of new
subflows, it is important to check endpoints can be re-created, re-using
previously used IDs.
Before the previous commit, the client would not have been able to
re-create the subflow that was previously rejected.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 06faa22710 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-6-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test extends "delete and re-add" to validate the previous commit. A
new 'subflow' endpoint is added, but the subflow request will be
rejected. The result is that no subflow will be established from this
address.
Later, the endpoint is removed and re-added after having cleared the
firewall rule. Before the previous commit, the client would not have
been able to create this new subflow.
While at it, extra checks have been added to validate the expected
numbers of MPJ and RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-4-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test extends "delete re-add signal" to validate the previous
commit. An extra address is announced by the server, but this address
cannot be used by the client. The result is that no subflow will be
established to this address.
Later, the server will delete this extra endpoint, and set a new one,
with a valid address, but re-using the same ID. Before the previous
commit, the server would not have been able to announce this new
address.
While at it, extra checks have been added to validate the expected
numbers of MPJ, ADD_ADDR and RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-2-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
