Strengthen the distinction between code that abstracts the
implementation of the KCS behaviours (device drivers) and code that
exploits KCS behaviours (clients). Neither needs to know about the APIs
required by the other, so provide separate headers.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-7-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Make the KCS device drivers responsible for allocating their own memory.
Until now the private data for the device driver was allocated internal
to the private data for the chardev interface. This coupling required
the slightly awkward API of passing through the struct size for the
driver private data to the chardev constructor, and then retrieving a
pointer to the driver private data from the allocated chardev memory.
In addition to being awkward, the arrangement prevents the
implementation of alternative userspace interfaces as the device driver
private data is not independent.
Peel a layer off the onion and turn the data-structures inside out by
exploiting container_of() and embedding `struct kcs_device` in the
driver private data.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-6-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Take steps towards defining a coherent API to separate the KCS device
drivers from the userspace interface. Decreasing the coupling will
improve the separation of concerns and enable the introduction of
alternative userspace interfaces.
For now, simply split the chardev logic out to a separate file. The code
continues to build into the same module.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-5-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Enable more efficient implementation of read-modify-write sequences.
Both device drivers for the KCS BMC stack use regmaps. The new callback
allows us to exploit regmap_update_bits().
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-3-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of just initializing always, which will invariably
create problems on multiplatform builds, turn this driver into
a module and pass a resource with the memory location.
The device only exist on the IXP46x so we only register
the device for the IXP46x SoC.
Cc: Deepak Saxena <dsaxena@plexity.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use DEVICE_ATTR_RW()/DEVICE_ATTR_RO() helper instead of
plain DEVICE_ATTR, which makes the code a bit shorter and
easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove leading spaces before tabs in Kconfig file(s) by running the
following command:
$ find drivers/char/hw_random -name 'Kconfig*' | x\
args sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The XillyUSB driver is the USB variant for the Xillybus FPGA IP core.
Even though it presents a nearly identical API on the FPGA and host,
it's almost a complete rewrite of the driver: The framework for exchanging
data on a USB bus is fundamentally different from doing the same with a
PCIe interface, which leaves very little in common between the existing
driver and the new one for XillyUSB.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20210526100311.56327-3-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is a preparation for adding another related driver, XillyUSB.
In order to share some code between the existing Xillybus driver and the
one to be added, some functions are moved to xillybus_class.c
XILLYBUS_CLASS is added to Kconfig and is common to all drivers in this
group. The relation with the existing XILLYBUS symbol is "select" rather
than "depends on" XILLYBUS_CLASS, or else "make olddefconfig" will silently
turn off XILLYBUS, which is currently enabled in several distributions.
XILLYBUS_CLASS doesn't depend on anything else, hence using it with
"select" poses no risk for a broken configuration.
After the future addition of the XillyUSB module, the tree of symbols
will be as follows:
XILLYBUS_CLASS --+-- XILLYBUS --+-- XILLYBUS_PCIE
| |
| +-- XILLYBUS_OF
|
+-- XILLYUSB
XILLYBUS is for drivers based upon memory registers + DMA-based interfaces,
and it's combined with XILLYBUS_PCIE and/or XILLYBUS_OF.
XILLYUSB is for the USB variant only.
Or a more detailed, bottom-up outline:
* CONFIG_XILLYBUS_PCIE -> xillybus_pcie.c: Functions related to PCIe.
* CONFIG_XILLYBUS_OF -> xillybus_of.c: Functions related to Xillybus as a
peripheral on an FPGA / Processor combo chip.
* CONFIG_XILLYBUS -> xillybus_core.c: Functions that are common to the two
above, mainly access to the peripheral with memory-mapped registers and
DMA.
* CONFIG_XILLYUSB -> xillyusb.c: The driver for the USB variant, accesses
the peripheral through the USB framework.
* CONFIG_XILLYBUS_CLASS -> xillybus_class.c: The new module, which contains
the class and API parts that would otherwise appear both in
xillybus_core.c and xillyusb.c. Contains utility functions for the two
latter.
And since I'm at it, comments on the module names are added in the
Kconfig's help part.
The functions are exported with the non-GPL EXPORT_SYMBOL (a matter of
taste).
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20210526100311.56327-2-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TI K3 family of SoCs have a SA2UL IP that contains a
SafeXcel IP-76 RNG block which is supported by the OMAP
RNG driver. Allow this driver to be built for TI K3
family as well.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull char/misc driver fixes from Greg KH:
"Here is a big set of char/misc/other driver fixes for 5.13-rc3.
The majority here is the fallout of the umn.edu re-review of all prior
submissions. That resulted in a bunch of reverts along with the
"correct" changes made, such that there is no regression of any of the
potential fixes that were made by those individuals. I would like to
thank the over 80 different developers who helped with the review and
fixes for this mess.
Other than that, there's a few habanna driver fixes for reported
issues, and some dyndbg fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (82 commits)
misc: eeprom: at24: check suspend status before disable regulator
uio_hv_generic: Fix another memory leak in error handling paths
uio_hv_generic: Fix a memory leak in error handling paths
uio/uio_pci_generic: fix return value changed in refactoring
Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""
dyndbg: drop uninformative vpr_info
dyndbg: avoid calling dyndbg_emit_prefix when it has no work
binder: Return EFAULT if we fail BINDER_ENABLE_ONEWAY_SPAM_DETECTION
cdrom: gdrom: initialize global variable at init time
brcmfmac: properly check for bus register errors
Revert "brcmfmac: add a check for the status of usb_register"
video: imsttfb: check for ioremap() failures
Revert "video: imsttfb: fix potential NULL pointer dereferences"
net: liquidio: Add missing null pointer checks
Revert "net: liquidio: fix a NULL pointer dereference"
media: gspca: properly check for errors in po1030_probe()
Revert "media: gspca: Check the return value of write_bridge for timeout"
media: gspca: mt9m111: Check write_bridge for timeout
Revert "media: gspca: mt9m111: Check write_bridge for timeout"
media: dvb: Add check on sp8870_readreg return
...
pm_runtime_resume_and_get() wraps around pm_runtime_get_sync() and
decrements the runtime PM usage counter in case the latter function
fails and keeps the counter balanced.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The variable err is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When an IPMI watchdog timer is being stopped in ipmi_close() or
ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to
WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called
to install this action. The latter function ends up invoking
__ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI
request.
For IPMI 1.0, this operation results in fully stopping the watchdog timer.
For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't
stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes
that the watchdog timer has its action correctly updated to 'none' but the
timer continues to run. A problem is that IPMI firmware can then still log
an expiration event when the configured timeout is reached, which is
unexpected because the watchdog timer was requested to be stopped.
The patch fixes this problem by not setting the "don't stop" flag in
__ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which
results in stopping the watchdog timer. This makes the behaviour for
IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in
__ipmi_heartbeat() which does not allow to reset the watchdog if the
current action is WDOG_TIMEOUT_NONE as that would start the timer.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Message-Id: <10a41bdc-9c99-089c-8d89-fa98ce5ea080@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This reverts commit 13bd14a41c.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
While this is technically correct, it is only fixing ONE of these errors
in this function, so the patch is not fully correct. I'll leave this
revert and provide a fix for this later that resolves this same
"problem" everywhere in this function.
Cc: Kangjie Lu <kjlu@umn.edu>
Link: https://lore.kernel.org/r/20210503115736.2104747-29-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Group the flow flags under a single struct called flow. The new struct
contains 'stopped' and 'tco_stopped' bools which used to be bits in a
bitfield. The struct also contains the lock protecting them to
potentially share the same cache line.
Note that commit c545b66c69 (tty: Serialize tcflow() with other tty
flow control changes) added a padding to the original bitfield. It was
for the bitfield to occupy a whole 64b word to avoid interferring stores
on Alpha (cannot we evaporate this arch with weird implications to C
code yet?). But it doesn't work as expected as the padding
(tty_struct::unused) is aligned to a 8B boundary too and occupies some
bytes from the next word.
So make it reliable by:
1) setting __aligned of the struct -- that aligns the start, and
2) making 'unsigned long unused[0]' as the last member of the struct --
pads the end.
This is also the perfect time to start the documentation of tty_struct
where all this lives. So we start by documenting what these bools
actually serve for. And why we do all the alignment dances. Only the few
up-to-date information from the Theodore's comment made it into this new
Kerneldoc comment.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: "Maciej W. Rozycki" <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/20210505091928.22010-13-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Noone stepped up in the past two years since it was marked as BROKEN by
commit c7084edc3f (tty: mark Siemens R3964 line discipline as BROKEN).
Remove the line discipline for good.
Three remarks:
* we remove also the uapi header (as noone is able to use that interface
anyway)
* we do *not* remove the N_R3964 constant definition from tty.h, so it
remains reserved.
* in_interrupt() check is now removed from vt's con_put_char. Noone else
calls tty_operations::put_char from interrupt context.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210505091928.22010-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the total number of commands queried through TPM2_CAP_COMMANDS is
different from that queried through TPM2_CC_GET_CAPABILITY, it indicates
an unknown error. In this case, an appropriate error code -EFAULT should
be returned. However, we currently do not explicitly assign this error
code to 'rc'. As a result, 0 was incorrectly returned.
Cc: stable@vger.kernel.org
Fixes: 58472f5cd4f6("tpm: validate TPM 2.0 commands")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pull IPMI updates from Corey Minyard:
"A bunch of little cleanups
Nothing major, no functional changes"
* tag 'for-linus-5.13-1' of git://github.com/cminyard/linux-ipmi:
ipmi_si: Join string literals back
ipmi_si: Drop redundant check before calling put_device()
ipmi_si: Use strstrip() to remove surrounding spaces
ipmi_si: Get rid of ->addr_source_cleanup()
ipmi_si: Reuse si_to_str[] array in ipmi_hardcode_init_one()
ipmi_si: Introduce ipmi_panic_event_str[] array
ipmi_si: Use proper ACPI macros to check error code for failures
ipmi_si: Utilize temporary variable to hold device pointer
ipmi_si: Remove bogus err_free label
ipmi_si: Switch to use platform_get_mem_or_io()
ipmi: Handle device properties with software node API
ipmi:ssif: make ssif_i2c_send() void
ipmi: Refine retry conditions for getting device id
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
