arm64: tegra: Changes for v5.10-rc1
This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.
It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.
* tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Initial Tegra234 VDK support
arm64: tegra: Populate EEPROMs for Jetson Xavier NX
arm64: tegra: Add label properties for EEPROMs
arm64: tegra: Add DT binding for AHUB components
arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
arm64: tegra: Properly size register regions for GPU on Tegra194
arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210
arm64: tegra: Describe display controller outputs for Tegra210
arm64: tegra: Disable SD card write-protection on Jetson Nano
arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano
arm64: tegra: Wire up pinctrl states for all DPAUX controllers
arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier
Link: https://lore.kernel.org/r/20200918150303.3938852-5-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas ARM DT updates for v5.10 (take two)
- PCIe endpoint support for the RZ/G2H SoC,
- SATA support for the HopeRun HiHope RZ/G2H board,
- Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on
the iWave Qseven board (G21D), and its camera add-on board,
- Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut
boards,
- HDMI display and sound support for the R-Car M3-W+ SoC on the
Salvator-XS board,
- Digital Radio Interface (DRIF) support for the R-Car E3 SoC,
- Minor fixes and cleanups.
* tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (24 commits)
arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Add DRIF support
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB
ARM: dts: r8a7742: Add VSP support
arm64: dts: renesas: Drop superfluous pin configuration containers
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Sound support
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Display support
arm64: dts: renesas: r8a77961: Add HDMI device nodes
arm64: dts: renesas: r8a77961: Add DU device nodes
arm64: dts: renesas: r8a77961: Add VSP device nodes
arm64: dts: renesas: r8a77961: Add FCP device nodes
arm64: dts: renesas: Fix pin controller node names
ARM: dts: renesas: Fix pin controller node names
arm64: dts: renesas: Add Renesas Falcon boards support
arm64: dts: renesas: Add Renesas R8A779A0 SoC support
ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication
ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
ARM: dts: r8a7742: Add VIN DT nodes
...
Link: https://lore.kernel.org/r/20200918124800.15555-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
We intend to use one header file for SERDES MUX for all
TI SoCs so rename the header file.
The exsting macros are too generic. Prefix them with SoC name.
While at that, add the missing configurations for completeness.
Fixes: b766e3b0d5 ("arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200918165930.2031-1-rogerq@ti.com
The NVIDIA Tegra234 VDK is a simulation platform for the Orin SoC. It
supports a subset of the peripherals that will be available in the final
chip and serves as a bootstrapping platform.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Summit SMB3xx series is a Programmable Switching Li+ Battery Charger.
This patch adds device-tree binding for Summit SMB345, SMB347 and SMB358
chargers.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Revert the platform driver conversion of interrupt chip drivers as
it turned out to create more problems than it solves.
- Fix a trivial typo in the new module helpers which made probing
reliably fail.
- Small fixes in the STM32 and MIPS Ingenic drivers
- The TI firmware rework which had badly managed dependencies and had
to wait post rc1"
* tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Leave parent IRQ unmasked on suspend
irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake
irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse
irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers
arm64: dts: k3-am65: Update the RM resource types
arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field
dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml
dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent.
irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml
dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent
firmware: ti_sci: Add support for getting resource with subtype
firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
firmware: ti_sci: Drop the device id to resource type translation
Pull scheduler fix from Thomas Gleixner:
"A single fix for the scheduler:
- Make is_idle_task() __always_inline to prevent the compiler from
putting it out of line into the wrong section because it's used
inside noinstr sections"
* tag 'sched-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Use __always_inline on is_idle_task()
Pull locking fixes from Thomas Gleixner:
"A set of fixes for lockdep, tracing and RCU:
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU
goes idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent"
* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep,trace: Expose tracepoints
lockdep: Only trace IRQ edges
mips: Implement arch_irqs_disabled()
arm64: Implement arch_irqs_disabled()
nds32: Implement arch_irqs_disabled()
locking/lockdep: Cleanup
x86/entry: Remove unused THUNKs
cpuidle: Move trace_cpu_idle() into generic code
cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
sched,idle,rcu: Push rcu_idle deeper into the idle path
cpuidle: Fixup IRQ state
lockdep: Use raw_cpu_*() for per-cpu variables
Pull powerpc fixes from Michael Ellerman:
- Revert our removal of PROT_SAO, at least one user expressed an
interest in using it on Power9. Instead don't allow it to be used in
guests unless enabled explicitly at compile time.
- A fix for a crash introduced by a recent change to FP handling.
- Revert a change to our idle code that left Power10 with no idle
support.
- One minor fix for the new scv system call path to set PPR.
- Fix a crash in our "generic" PMU if branch stack events were enabled.
- A fix for the IMC PMU, to correctly identify host kernel samples.
- The ADB_PMU powermac code was found to be incompatible with
VMAP_STACK, so make them incompatible in Kconfig until the code can
be fixed.
- A build fix in drivers/video/fbdev/controlfb.c, and a documentation
fix.
Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.
* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
powerpc/64s: scv entry should set PPR
Documentation/powerpc: fix malformed table in syscall64-abi
video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
powerpc/64s: Disallow PROT_SAO in LPARs by default
Revert "powerpc/64s: Remove PROT_SAO support"
Pull xen fixes from Juergen Gross:
"Two fixes for Xen: one needed for ongoing work to support virtio with
Xen, and one for a corner case in IRQ handling with Xen"
* tag 'for-linus-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: Add misuse warning to virt_to_gfn
xen/xenbus: Fix granting of vmalloc'd memory
XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.
Pull power management fixes from Rafael Wysocki:
"These fix the recently added Tegra194 cpufreq driver and the handling
of devices using runtime PM during system-wide suspend, improve the
intel_pstate driver documentation and clean up the cpufreq core.
Specifics:
- Make the recently added Tegra194 cpufreq driver use
read_cpuid_mpir() instead of cpu_logical_map() to avoid exporting
logical_cpu_map (Sumit Gupta).
- Drop the automatic system wakeup event reporting for devices with
pending runtime-resume requests during system-wide suspend to avoid
spurious aborts of the suspend flow (Rafael Wysocki).
- Fix build warning in the intel_pstate driver documentation and
improve the wording in there (Randy Dunlap).
- Clean up two pieces of code in the cpufreq core (Viresh Kumar)"
* tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Use WARN_ON_ONCE() for invalid relation
cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
PM: sleep: core: Fix the handling of pending runtime resume requests
Documentation: fix pm/intel_pstate build warning and wording
cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
* pm-cpufreq:
cpufreq: Use WARN_ON_ONCE() for invalid relation
cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
Documentation: fix pm/intel_pstate build warning and wording
cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
I keep getting sparse warnings in crypto such as:
CHECK drivers/crypto/ccree/cc_hash.c
drivers/crypto/ccree/cc_hash.c:49:9: warning: cast truncates bits from constant value (47b5481dbefa4fa4 becomes befa4fa4)
drivers/crypto/ccree/cc_hash.c:49:26: warning: cast truncates bits from constant value (db0c2e0d64f98fa7 becomes 64f98fa7)
[.. many more ..]
This patch removes the warning by adding a mask to keep sparse
happy.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull writeback fixes from Jan Kara:
"Fixes for writeback code occasionally skipping writeback of some
inodes or livelocking sync(2)"
* tag 'writeback_for_v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
writeback: Drop I_DIRTY_TIME_EXPIRE
writeback: Fix sync livelock due to b_dirty_time processing
writeback: Avoid skipping inode writeback
writeback: Protect inode->i_io_list with inode->i_lock
Pull ceph fixes from Ilya Dryomov:
"We have an inode number handling change, prompted by s390x which is a
64-bit architecture with a 32-bit ino_t, a patch to disallow leases to
avoid potential data integrity issues when CephFS is re-exported via
NFS or CIFS and a fix for the bulk of W=1 compilation warnings"
* tag 'ceph-for-5.9-rc3' of git://github.com/ceph/ceph-client:
ceph: don't allow setlease on cephfs
ceph: fix inode number handling on arches with 32-bit ino_t
libceph: add __maybe_unused to DEFINE_CEPH_FEATURE
Pull drm fixes from Dave Airlie:
"As expected a bit of an rc3 uptick, amdgpu and msm are the main ones,
one msm patch was from the merge window, but had dependencies and we
dropped it until the other tree had landed. Otherwise it's a couple of
fixes for core, and etnaviv, and single i915, exynos, omap fixes.
I'm still tracking the Sandybridge gpu relocations issue, if we don't
see much movement I might just queue up the reverts. I'll talk to
Daniel next week once he's back from holidays.
core:
- Take modeset bkl for legacy drivers
dp_mst:
- Allow null crtc in dp_mst
i915:
- Fix command parser desc matching with masks
amdgpu:
- Misc display fixes
- Backlight fixes
- MPO fix for DCN1
- Fixes for Sienna Cichlid
- Fixes for Navy Flounder
- Vega SW CTF fixes
- SMU fix for Raven
- Fix a possible overflow in INFO ioctl
- Gfx10 clockgating fix
msm:
- opp/bw scaling patch followup
- frequency restoring fux
- vblank in atomic commit fix
- dpu modesetting fixes
- fencing fix
etnaviv:
- scheduler interaction fix
- gpu init regression fix
exynos:
- Just drop __iommu annotation to fix sparse warning
omap:
- locking state fix"
* tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init
drm/amdgpu: disable runtime pm for navy_flounder
drm/amd/display: Retry AUX write when fail occurs
drm/amdgpu: Fix buffer overflow in INFO ioctl
drm/amd/powerplay: Fix hardmins not being sent to SMU for RV
drm/amdgpu: use MODE1 reset for navy_flounder by default
drm/amd/pm: correct the thermal alert temperature limit settings
drm/amdgpu: add asd fw check before loading asd
drm/amd/display: Keep current gain when ABM disable immediately
drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation
drm/amd/display: Revert HDCP disable sequence change
drm/amd/display: Send DISPLAY_OFF after power down on boot
drm/amdgpu/gfx10: refine mgcg setting
drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting
drm/amd/pm: set VCN pg per instances
drm/amd/pm: enable run_btc callback for sienna_cichlid
drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps
drm/amd/display: Reject overlay plane configurations in multi-display scenarios
...
The relation can't be invalid here, so if it turns out to be invalid,
just WARN_ON_ONCE() and return 0.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Problem:
raw_local_irq_save(); // software state on
local_irq_save(); // software state off
...
local_irq_restore(); // software state still off, because we don't enable IRQs
raw_local_irq_restore(); // software state still off, *whoopsie*
existing instances:
- lock_acquire()
raw_local_irq_save()
__lock_acquire()
arch_spin_lock(&graph_lock)
pv_wait() := kvm_wait() (same or worse for Xen/HyperV)
local_irq_save()
- trace_clock_global()
raw_local_irq_save()
arch_spin_lock()
pv_wait() := kvm_wait()
local_irq_save()
- apic_retrigger_irq()
raw_local_irq_save()
apic->send_IPI() := default_send_IPI_single_phys()
local_irq_save()
Possible solutions:
A) make it work by enabling the tracing inside raw_*()
B) make it work by keeping tracing disabled inside raw_*()
C) call it broken and clean it up now
Now, given that the only reason to use the raw_* variant is because you don't
want tracing. Therefore A) seems like a weird option (although it can be done).
C) is tempting, but OTOH it ends up converting a _lot_ of code to raw just
because there is one raw user, this strips the validation/tracing off for all
the other users.
So we pick B) and declare any code that ends up doing:
raw_local_irq_save()
local_irq_save()
lockdep_assert_irqs_disabled();
broken. AFAICT this problem has existed forever, the only reason it came
up is because commit: 859d069ee1 ("lockdep: Prepare for NMI IRQ
state tracking") changed IRQ tracing vs lockdep recursion and the
first instance is fairly common, the other cases hardly ever happen.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[rewrote changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200723105615.1268126-1-npiggin@gmail.com
Sven reported that commit a21ee6055c ("lockdep: Change
hardirq{s_enabled,_context} to per-cpu variables") caused trouble on
s390 because their this_cpu_*() primitives disable preemption which
then lands back tracing.
On the one hand, per-cpu ops should use preempt_*able_notrace() and
raw_local_irq_*(), on the other hand, we can trivialy use raw_cpu_*()
ops for this.
Fixes: a21ee6055c ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200821085348.192346882@infradead.org
Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
protection, bad ref counting, missing memset(), etc.) all over the
place:
1) Use get_file_rcu() in task_file iterator, from Yonghong Song.
2) There are two ways to set remote source MAC addresses in macvlan
driver, but only one of which validates things properly. Fix this.
From Alvin Šipraga.
3) Missing of_node_put() in gianfar probing, from Sumera
Priyadarsini.
4) Preserve device wanted feature bits across multiple netlink
ethtool requests, from Maxim Mikityanskiy.
5) Fix rcu_sched stall in task and task_file bpf iterators, from
Yonghong Song.
6) Avoid reset after device destroy in ena driver, from Shay
Agroskin.
7) Missing memset() in netlink policy export reallocation path, from
Johannes Berg.
8) Fix info leak in __smc_diag_dump(), from Peilin Ye.
9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
Tomlinson.
10) Fix number of data stream negotiation in SCTP, from David Laight.
11) Fix double free in connection tracker action module, from Alaa
Hleihel.
12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: nexthop: don't allow empty NHA_GROUP
bpf: Fix two typos in uapi/linux/bpf.h
net: dsa: b53: check for timeout
tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
net: sctp: Fix negotiation of the number of data streams.
dt-bindings: net: renesas, ether: Improve schema validation
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
hv_netvsc: Remove "unlikely" from netvsc_select_queue
bpf: selftests: global_funcs: Check err_str before strstr
bpf: xdp: Fix XDP mode when no mode flags specified
selftests/bpf: Remove test_align leftovers
tools/resolve_btfids: Fix sections with wrong alignment
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
sfc: fix build warnings on 32-bit
net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
libbpf: Fix map index used in error message
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
net: atlantic: Use readx_poll_timeout() for large timeout
...
Alexei Starovoitov says:
====================
pull-request: bpf 2020-08-21
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 78 insertions(+), 24 deletions(-).
The main changes are:
1) three fixes in BPF task iterator logic, from Yonghong.
2) fix for compressed dwarf sections in vmlinux, from Jiri.
3) fix xdp attach regression, from Andrii.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull RISC-V fixes from Palmer Dabbelt:
- The CLINT driver has been split in two: one to handle the M-mode
CLINT (memory mapped and used on NOMMU systems) and one to handle the
S-mode CLINT (via SBI).
- The addition of SiFive's drivers to rv32_defconfig
* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SiFive drivers to rv32_defconfig
dt-bindings: timer: Add CLINT bindings
RISC-V: Remove CLINT related code from timer and arch
clocksource/drivers: Add CLINT timer driver
RISC-V: Add mechanism to provide custom IPI operations
Pull ext4 updates from Ted Ts'o:
"Improvements to ext4's block allocator performance for very large file
systems, especially when the file system or files which are highly
fragmented. There is a new mount option, prefetch_block_bitmaps which
will pull in the block bitmaps and set up the in-memory buddy bitmaps
when the file system is initially mounted.
Beyond that, a lot of bug fixes and cleanups. In particular, a number
of changes to make ext4 more robust in the face of write errors or
file system corruptions"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
ext4: limit the length of per-inode prealloc list
ext4: reorganize if statement of ext4_mb_release_context()
ext4: add mb_debug logging when there are lost chunks
ext4: Fix comment typo "the the".
jbd2: clean up checksum verification in do_one_pass()
ext4: change to use fallthrough macro
ext4: remove unused parameter of ext4_generic_delete_entry function
mballoc: replace seq_printf with seq_puts
ext4: optimize the implementation of ext4_mb_good_group()
ext4: delete invalid comments near ext4_mb_check_limits()
ext4: fix typos in ext4_mb_regular_allocator() comment
ext4: fix checking of directory entry validity for inline directories
fs: prevent BUG_ON in submit_bh_wbc()
ext4: correctly restore system zone info when remount fails
ext4: handle add_system_zone() failure in ext4_setup_system_zone()
ext4: fold ext4_data_block_valid_rcu() into the caller
ext4: check journal inode extents more carefully
ext4: don't allow overlapping system zones
ext4: handle error of ext4_setup_system_zone() on remount
ext4: delete the invalid BUGON in ext4_mb_load_buddy_gfp()
...
Pull dma-mapping fixes from Christoph Hellwig:
"Fix more fallout from the dma-pool changes (Nicolas Saenz Julienne,
me)"
* tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: Only allocate from CMA when in same memory zone
dma-pool: fix coherent pool allocations for IOMMU mappings
In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.
After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:
Running time on unfixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m2.051s
user 0m0.008s
sys 0m2.026s
Running time on fixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m0.471s
user 0m0.004s
sys 0m0.395s
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch is to do 3 things for ipv6_dev_find():
As David A. noticed,
- rt6_lookup() is not really needed. Different from __ip_dev_find(),
ipv6_dev_find() doesn't have a compatibility problem, so remove it.
As Hideaki suggested,
- "valid" (non-tentative) check for the address is also needed.
ipv6_chk_addr() calls ipv6_chk_addr_and_flags(), which will
traverse the address hash list, but it's heavy to be called
inside ipv6_dev_find(). This patch is to reuse the code of
ipv6_chk_addr_and_flags() for ipv6_dev_find().
- dev parameter is passed into ipv6_dev_find(), as link-local
addresses from user space has sin6_scope_id set and the dev
lookup needs it.
Fixes: 81f6cb3122 ("ipv6: add ipv6_dev_find()")
Suggested-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ia64 page table fix from Mike Rapoport:
"Fix regression in IA-64 caused by page table allocation refactoring
The refactoring and consolidation of <asm/pgalloc.h> caused regression
on parisc and ia64. The fix for parisc made it into v5.9-rc1 while the
fix ia64 got delayed a bit and here it is"
* tag 'fixes-2020-08-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arch/ia64: Restore arch-specific pgd_offset_k implementation
Pull networking fixes from David Miller:
"Another batch of fixes:
1) Remove nft_compat counter flush optimization, it generates warnings
from the refcount infrastructure. From Florian Westphal.
2) Fix BPF to search for build id more robustly, from Jiri Olsa.
3) Handle bogus getopt lengths in ebtables, from Florian Westphal.
4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and
Oleksij Rempel.
5) Reset iter properly on mptcp sendmsg() error, from Florian
Westphal.
6) Show a saner speed in bonding broadcast mode, from Jarod Wilson.
7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones.
8) Fix double unregister in bonding during namespace tear down, from
Cong Wang.
9) Disable RP filter during icmp_redirect selftest, from David Ahern"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
otx2_common: Use devm_kcalloc() in otx2_config_npa()
net: qrtr: fix usage of idr in port assignment to socket
selftests: disable rp_filter for icmp_redirect.sh
Revert "net: xdp: pull ethernet header off packet after computing skb->protocol"
phylink: <linux/phylink.h>: fix function prototype kernel-doc warning
mptcp: sendmsg: reset iter on error redux
net: devlink: Remove overzealous WARN_ON with snapshots
tipc: not enable tipc when ipv6 works as a module
tipc: fix uninit skb->data in tipc_nl_compat_dumpit()
net: Fix potential wrong skb->protocol in skb_vlan_untag()
net: xdp: pull ethernet header off packet after computing skb->protocol
ipvlan: fix device features
bonding: fix a potential double-unregister
can: j1939: add rxtimer for multipacket broadcast session
can: j1939: abort multipacket broadcast session when timeout occurs
can: j1939: cancel rxtimer on multipacket broadcast session complete
can: j1939: fix support for multipacket broadcast message
net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs'
net: fddi: skfp: cfm: Remove set but unused variable 'oldstate'
net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs'
...
IA-64 is special and treats pgd_offset_k() differently to pgd_offset(),
using different formulae to calculate the indices into the kernel and user
PGDs. The index into the user PGDs takes into account the region number,
but the index into the kernel (init_mm) PGD always assumes a predefined
kernel region number. Commit 974b9b2c68 ("mm: consolidate pte_index() and
pte_offset_*() definitions") made IA-64 use a generic pgd_offset_k() which
incorrectly used pgd_index() for kernel page tables. As a result, the
index into the kernel PGD was going out of bounds and the kernel hung
during early boot.
Allow overrides of pgd_offset_k() and override it on IA-64 with the old
implementation that will correctly index the kernel PGD.
Fixes: 974b9b2c68 ("mm: consolidate pte_index() and pte_offset_*() definitions")
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Fix a kernel-doc warning for the pcs_config() function prototype:
../include/linux/phylink.h:406: warning: Excess function parameter 'permit_pause_to_mac' description in 'pcs_config'
Fixes: 7137e18f6f ("net: phylink: add struct phylink_pcs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Impose a limit on the number of watches that a user can hold so that
they can't use this mechanism to fill up all the available memory.
This is done by putting a counter in user_struct that's incremented when
a watch is allocated and decreased when it is released. If the number
exceeds the RLIMIT_NOFILE limit, the watch is rejected with EAGAIN.
This can be tested by the following means:
(1) Create a watch queue and attach it to fd 5 in the program given - in
this case, bash:
keyctl watch_session /tmp/nlog /tmp/gclog 5 bash
(2) In the shell, set the maximum number of files to, say, 99:
ulimit -n 99
(3) Add 200 keyrings:
for ((i=0; i<200; i++)); do keyctl newring a$i @s || break; done
(4) Try to watch all of the keyrings:
for ((i=0; i<200; i++)); do echo $i; keyctl watch_add 5 %:a$i || break; done
This should fail when the number of watches belonging to the user hits
99.
(5) Remove all the keyrings and all of those watches should go away:
for ((i=0; i<200; i++)); do keyctl unlink %:a$i; done
(6) Kill off the watch queue by exiting the shell spawned by
watch_session.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Endianness issue in IPv4 option support in nft_exthdr,
from Stephen Suryaputra.
2) Removes the waitcount optimization in nft_compat,
from Florian Westphal.
3) Remove ipv6 -> nf_defrag_ipv6 module dependency, from
Florian Westphal.
4) Memleak in chain binding support, also from Florian.
5) Simplify nft_flowtable.sh selftest, from Fabian Frederick.
6) Optional MTU arguments for selftest nft_flowtable.sh,
also from Fabian.
7) Remove noise error report when killing process in
selftest nft_flowtable.sh, from Fabian Frederick.
8) Reject bogus getsockopt option length in ebtables,
from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With SYSFW ABI 3.0 changes, interrupts coming out of an interrupt
controller is identified by a type and it is consistent across SoCs.
Similarly global events for Interrupt aggregator. So add an API to get
resource range using a resource type.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20200806074826.24607-4-lokeshvutla@ti.com
Pull io_uring fixes from Jens Axboe:
"A few differerent things in here.
Seems like syzbot got some more io_uring bits wired up, and we got a
handful of reports and the associated fixes are in here.
General fixes too, and a lot of them marked for stable.
Lastly, a bit of fallout from the async buffered reads, where we now
more easily trigger short reads. Some applications don't really like
that, so the io_read() code now handles short reads internally, and
got a cleanup along the way so that it's now easier to read (and
documented). We're now passing tests that failed before"
* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
io_uring: short circuit -EAGAIN for blocking read attempt
io_uring: sanitize double poll handling
io_uring: internally retry short reads
io_uring: retain iov_iter state over io_read/io_write calls
task_work: only grab task signal lock when needed
io_uring: enable lookup of links holding inflight files
io_uring: fail poll arm on queue proc failure
io_uring: hold 'ctx' reference around task_work queue + execute
fs: RWF_NOWAIT should imply IOCB_NOIO
io_uring: defer file table grabbing request cleanup for locked requests
io_uring: add missing REQ_F_COMP_LOCKED for nested requests
io_uring: fix recursive completion locking on oveflow flush
io_uring: use TWA_SIGNAL for task_work uncondtionally
io_uring: account locked memory before potential error case
io_uring: set ctx sq/cq entry count earlier
io_uring: Fix NULL pointer dereference in loop_rw_iter()
io_uring: add comments on how the async buffered read retry works
io_uring: io_async_buf_func() need not test page bit
