On GFXIP9.4.3 APP APU where there is no dedicated VRAM domain handle
VRAM BO allocation requests on CPU domain and validate them on GTT.
Support for handling multi-socket and multi-numa partitions within a
socket will be added by future patches, this enables 1P NPS1 asic
bringup configuration.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[For 1P NPS1 mode driver bringup]
Changes required to initialize the amdgpu driver with frontdoor firmware
loading and discovery=2 with the native mode SBIOS that enables CPU GPU
unified interleaved memory.
sudo modprobe amdgpu discovery=2
Once PSP TMR region is reported via the ACPI interface, the dependency
on the ip_discovery.bin will be removed.
Choice of where to allocate driver table is given to each IP version. In
general, both GTT and VRAM domains will be considered. If one of the
tables has a strict restriction for VRAM domain, then only VRAM domain
is considered.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
(lijo: Modified the handling for SMU Tables)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add query_ras_error_count callback for mmhub v1_8.
It will be used to query and log mmhub error count
and memory block.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add query_ras_error_count callback for sdma
v4_4_2. It will be used to query and log sdma
uncorrectable error count and memory block.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add common helper to reset ras error status. It
applies to IP blocks that follow the new ras error
logging register design, and need to write 0 to
reset the error status. For IP blocks that don't
support the new design, please still implement ip
specific helper.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add common helper to query ras error status and
log error information, including memory block id
and erorr count. The helpers are applicable to IP
blocks that follow the new ras error logging design.
For IP blocks that don't support the new design,
please still implement ip specific helper to query
ras error.
v2: optimize struct amdgpu_ras_err_status_reg_entry
and the implementaion in helper (Lijo/Tao)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With SDMA_CTNL.CTXEMPTY_INT_ENABLE set, the F32 clock can be gated when
SDMA finishes all job and goes to idle.
And no specific interrupt handling is required in driver.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For MQD init, an XCC's queue is selected with GRBM select. However, for
initialization of MQD, values read from logical XCC0 registers are used.
This results in garbage values being read from XCC0 whose queue is not
selected. Change to read from the right XCC for MQD initialization.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable coarse grain clockgating/light sleep for GC v9.4.3. Remove
programming that is not meant for GC 9.4.3.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Program different ranges in each XCC with MEC_DOORBELL_RANGE_LOWER/HIGHER.
Keeping the same range causes CPF in other XCCs also to be busy when an IB
packet is submitted to KCQ. Only the XCC which processes the packet
comes back to idle afterwards and this causes other CPs not be idle.
This in turn affects clockgating behavior as RLC doesn't get idle
interrupt.
LOWER/HIGHER covers only KIQ/KCQs which are per XCC queues. Assigning
different ranges doesn't seem to have any side effect as user queue ranges
are outside of this range. User queue tests - PM4 through KFD and AQL
through rocr - have the same results after this change.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During ASIC wide reset, SDMA shouldn't be clockgated and be ready to
accept freeze requests from PMFW. For that, don't stop SDMA engine
during reset and keep the clocks active.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WA] Increase AMDGPU_MAX_HWIP_RINGS to 64 to support more compute
ring resource. Later need redesign with queue/prirority/scheduler
factors to reduce AMDGPU_MAX_HWIP_RINGS.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When overridden with module param, directly read discovery info
from discovery binary instead of reading from VRAM.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some AMD APUs may not have a dedicated VRAM. On such platforms the GART
table should be allocated on the system memory. When real vram size is
zero, place the GART table in system memory and create an SG BO to make
it GPU accessible.
v2: fix includes
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
(rajneesh: removed set_memory_wc workaround)
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add logic for fine grain clock gating logic for GFX v9.4.3. The feature
will be controlled using CG flags. Also, make a change so that RLC safe
mode entry/exit is done only once during CG update sequence.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On AMD APP APUs, to make UTCL2 snoop CPU caches, its not sufficient to
rely on xgmi connected flag so add the logic to use is_app_apu to
program the PDE_REQUEST_PHYSICAL bit correctly for gfxhub and mmhub
both.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Each compute cluster gets 8 compute queues in GFX v9.4.3. Fix the EOP
buffer allocation so that compute queue on every XCC gets a unique
address.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-and-Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to check return value, as the function internally
used - amdgpu_discovery_read_binary_from_vram() - returns void.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The AMDGPU_GFXHUB was bind to each xcc in the logical order.
Thus convert the node_id to logical xcc_id to index the
correct AMDGPU_GFXHUB. And "node_id / 4" can get the correct
AMDGPU_MMHUB0 index.
Signed-off-by: Le Ma <le.ma@amd.com>
Tested-by: Asad kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply the GFXIP 9.4.3 specific snoop and mtype settings for various
scenarios such as APU, APU in Carveout mode and dGPU mode.
Note: This is expected to change due to:
1 - NPS > 1 support in future
2 - Hardware bugs found during initial asic bringup.
Cc: Graham Sider <graham.sider@amd.com>
Cc: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA instances per active cluster and SDMA instance mask are used
to find the number of active clusters.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
