Interrupt sq data bits were not taken properly from contextid0 and contextid1.
Use macro KFD_CONTEXT_ID_GET_SQ_INT_DATA instead.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if hmm_range_get_pages returns EBUSY error during
svm_range_validate_and_map, within the context of a page fault
interrupt. This should retry through svm_range_restore_pages
callback. Therefore we treat this as EAGAIN error instead, and defer
it to restore pages fallback.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To prevent its redundant implementation and streamline
code, use memdup_user.
This fixes warnings reported by Coccinelle:
./drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c:2811:13-20: WARNING opportunity for memdup_user
Signed-off-by: Atul Raut <rauji.raut@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When CONFIG_DYNAMIC_DEBUG is disabled altogether, calling
_dynamic_func_call_no_desc() does not work:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c: In function 'svm_range_set_attr':
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:52:9: error: implicit declaration of function '_dynamic_func_call_no_desc' [-Werror=implicit-function-declaration]
52 | _dynamic_func_call_no_desc("svm_range_dump", svm_range_debug_dump, svms)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:3564:9: note: in expansion of macro 'dynamic_svm_range_dump'
3564 | dynamic_svm_range_dump(svms);
| ^~~~~~~~~~~~~~~~~~~~~~
Add a compile-time conditional in addition to the runtime check.
Fixes: 8923137dbe ("drm/amdkfd: avoid svm dump when dynamic debug disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
v2: use the dGPU queue manager functions
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch:
- adds a doorbell object in kfd pdd structure.
- allocates doorbells for a process while creating its queue.
- frees the doorbells with pdd destroy.
- moves doorbell bitmap init function to kfd_doorbell.c
PS: This patch ensures that we don't break the existing KFD
functionality, but now KFD userspace library should also
create doorbell pages as AMDGPU GEM objects using libdrm
functions in userspace. The reference code for the same
is available with AMDGPU Usermode queue libdrm MR. Once
this is done, we will not need to create process doorbells
in kernel.
V2: - Do not use doorbell wrapper API, use amdgpu_bo_create_kernel
instead (Alex).
- Do not use custom doorbell structure, instead use separate
variables for bo and doorbell_bitmap (Alex)
V3:
- Do not allocate doorbell page with PDD, delay doorbell process
page allocation until really needed (Felix)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felilx.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch:
- adds a doorbell bo in kfd device structure.
- creates doorbell page for kfd kernel usages.
- updates the get_kernel_doorbell and free_kernel_doorbell functions
accordingly
V2: Do not use wrapper API, use direct amdgpu_create_kernel(Alex)
V3:
- Move single variable declaration below (Christian)
- Add a to-do item to reuse the KGD kernel level doorbells for
KFD for non-MES cases, instead of reserving one page (Felix)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMEM instructions can reach addresses above 47 bits but require
bit 47 to be sign-extended through bits [63:48].
This allows the TMA to be relocated in a following patch.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The TBA and TMA, along with an unused IB allocation, reside at low
addresses in the VM address space. A stray VM fault which hits these
pages must be serviced by making their page table entries invalid.
The scheduler depends upon these pages being resident and fails,
preventing a debugger from inspecting the failure state.
By relocating these pages above 47 bits in the VM address space they
can only be reached when bits [63:48] are set to 1. This makes it much
less likely for a misbehaving program to generate accesses to them.
The current placement at VA (PAGE_SIZE*2) is readily hit by a NULL
access with a small offset.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMA address reference within svm_ranges should be unmapped only after
the memory has been released from the system. In case of range
splitting, the DMA address information should be copied to the
corresponding range after this has split. But leaving dma mapping
intact.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES cached process context must be cleared on adding any queue for
the first time.
For proper debug support, the MES will clear it's cached process context
on the first call to SET_SHADER_DEBUGGER.
This allows TTMPs to be pesistently enabled in a safe manner.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Eric Huang <jinhuieric@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set dynamic_svm_range_dump macro to avoid iterating over SVM lists
from svm_range_debug_dump when dynamic debug is disabled. Otherwise,
it could drop performance, specially with big number of SVM ranges.
Make sure both svm_range_set_attr and svm_range_debug_dump functions
are dynamically enabled to print svm_range_debug_dump debug traces.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Tested-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES can concurrently schedule queues on the device that require
exclusive device access if marked exclusively_scheduled without the
requirement of GWS. Similar to the F32 HWS, MES will manage
quality of service for these queues.
Use this for cooperative groups since cooperative groups are device
occupancy limited.
Since some GFX11 devices can only be debugged with partial CUs, do not
allow the debugging of cooperative groups on these devices as the CU
occupancy limit will change on attach.
In addition, zero initialize the MES add queue submission vector for MES
initialization tests as we do not want these to be cooperative
dispatches.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
The feature to save the dispatch ID in trap temporaries 6 & 7 on context
save is unconditionally enabled during MQD initialization.
Now that TTMPs are always setup regardless of debug mode for GC 9.4.3, we
should report that the dispatch ID is always available for debug/trap
handling.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to GC v9.4.2, GC v9.4.3 should use the 5-Dword extended
MAP_PROCESS packet to support multi-process debugging. Update the
mutli-process debug support list so that the KFD updates the runlist
on debug mode setting and that it allocates enough GTT memory during
KFD device initialization.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the SVM range has no GPU access nor access-in-place attribute,
validate and map to GPU should skip the range.
Add NULL pointer check if find_first_bit(ctx->bitmap, MAX_GPU_INSTANCE)
returns MAX_GPU_INSTANCE as gpuidx if ctx->bitmap is empty.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we unmap HIQ by directly writing to HQD
registers. This doesn't work for GFX9.4.3. Instead,
use KIQ to unmap HIQ, similar to how we use KIQ to
map HIQ. Using KIQ to unmap HIQ works for all GFX
series post GFXv9.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Directly invoking the function amdgpu_gem_prime_export() from within
KFD is not correct. By utilizing the KFD API to obtain Dmabuf, the
implementation can prevent the creation of multiple instances of
struct dma_buf.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX 9.4.3, interrupt handling needs to be updated for:
- Interrupt cookie will have a NodeId field. Each KFD
node needs to check the NodeId before processing the
interrupt.
- For CPX mode, there are additional checks of client ID
needed to process the interrupt.
- Add NodeId to the process drain interrupt.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update user space last_event_age when event age is enabled.
It is only for KFD_EVENT_TYPE_SIGNAL which is checked by user space.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
