Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, target, tcmu,
smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).
The major core change is using a sbitmap instead of an atomic for
queue tracking"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
scsi: target: tcm_fc: Fix a kernel-doc header
scsi: target: Shorten ALUA error messages
scsi: target: Fix two format specifiers
scsi: target: Compare explicitly with SAM_STAT_GOOD
scsi: sd: Introduce a new local variable in sd_check_events()
scsi: dc395x: Open-code status_byte(u8) calls
scsi: 53c700: Open-code status_byte(u8) calls
scsi: smartpqi: Remove unused functions
scsi: qla4xxx: Remove an unused function
scsi: myrs: Remove unused functions
scsi: myrb: Remove unused functions
scsi: mpt3sas: Fix two kernel-doc headers
scsi: fcoe: Suppress a compiler warning
scsi: libfc: Fix a format specifier
scsi: aacraid: Remove an unused function
scsi: core: Introduce enum scsi_disposition
scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
scsi: core: Rename scsi_softirq_done() into scsi_complete()
scsi: core: Remove an incorrect comment
scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
...
OFA, Online Firmware Activation, allows users to update firmware without a
reboot.
- Change OFA setup to a worker thread
- Delay soft resets
- Add OFA event handler to allow FW to initiate OFA
- Add in-memory allocation to OFA events
- Update OFA buffer size calculations
- Add ability to cancel OFA events
- Update OFA quiesce/un-quiesce
- Prevent Kernel crashes while issuing ioctl during OFA
- Returned EBUSY for pass-through IOCTLs throughout all stages of OFA
- Add mutex to prevent parallel OFA updates.
Link: https://lore.kernel.org/r/161549381563.25025.2647205502550052197.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cleanup soft reset code for Online Firmware Activation (OFA). OFA allows
controller firmware updates without a reboot.
OFA updates require an on-line controller reset to activate the updated
firmware. There were some missing actions for some of the reset cases. The
controller is first set back to sis mode before returning to pqi mode.
Check to ensure the controller is in sis mode.
Release QRM memory (OFA buffer) on OFA error conditions. Clean up
controller state which can cause a kernel panic upon reboot after an
unsuccessful OFA.
Link: https://lore.kernel.org/r/161549379215.25025.10654441314249183621.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow R5/R6 stream detection to be disabled/enabled using sysfs entry
enable_stream_detection.
Example usage:
lsscsi
[2:2:0:0] storage Adaptec 3258P-32i /e 0010
^
|
+---- NOTE: here host is host2
find /sys -name \*enable_stream\*
/sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
/sys/devices/pci0000:5b/0000:5b:00.0/0000:5c:00.0/host3/scsi_host/host3/enable_stream_detection
Current stream detection:
cat /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
1
Turn off stream detection:
echo 0 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
Turn on stream detection:
echo 1 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
Link: https://lore.kernel.org/r/161549376281.25025.1132304698441513738.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhance performance by adding sequential stream detection for RAID5/RAID6
sequential write requests. Reduce stripe lock contention with full-stripe
write operations.
There is one common stripe lock for each RAID volume that can be set by
either the RAID engine or the AIO engine. The AIO path has I/O request
sizes well below the stripe size resulting in many Read-Modify-Write
operations.
Sending the request to the RAID engine allows for coalescing requests into
full stripe operations resulting in reduced Read-Modify-Write operations.
Link: https://lore.kernel.org/r/161549375693.25025.2962141451773219796.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
The PCI config accessors (pci_read_config_word(), et al) return
PCIBIOS_SUCCESSFUL (zero) or positive error values like
PCIBIOS_FUNC_NOT_SUPPORTED.
The PCIe capability accessors (pcie_capability_read_word(), et al)
similarly return PCIBIOS errors, but some callers assume they return
generic errno values like -EINVAL.
For example, the Myri-10G probe function returns a positive PCIBIOS error
if the pcie_capability_clear_and_set_word() in pcie_set_readrq() fails:
myri10ge_probe
status = pcie_set_readrq
return pcie_capability_clear_and_set_word
if (status)
return status
A positive return from a PCI driver probe function would cause a "Driver
probe function unexpectedly returned" warning from local_pci_probe()
instead of the desired probe failure.
Convert PCIBIOS errors to generic errno for all callers of:
pcie_capability_read_word
pcie_capability_read_dword
pcie_capability_write_word
pcie_capability_write_dword
pcie_capability_set_word
pcie_capability_set_dword
pcie_capability_clear_word
pcie_capability_clear_dword
pcie_capability_clear_and_set_word
pcie_capability_clear_and_set_dword
that check the return code for anything other than zero.
[bhelgaas: commit log, squash together]
Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Link: https://lore.kernel.org/r/20200615073225.24061-1-refactormyself@gmail.com
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
