Pull SoC driver updates from Arnd Bergmann:
"These are changes to SoC specific drivers and DT bindings that don't
have a separate subsystem tree, or that get grouped here for
simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding
support for additional SoCs in the exssting drivers, and support
for wrapped encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx
and renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the
code and adding a few interfaces to other drivers"
* tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (58 commits)
drivers/soc/litex: Use devm_register_restart_handler()
reset: amlogic: aux: drop aux registration helper
reset: amlogic: aux: get regmap through parent device
reset: amlogic: add support for A1 SoC in auxiliary reset driver
dt-bindings: reset: add bindings for A1 SoC audio reset controller
soc/tegra: fuse: Update Tegra234 nvmem keepout list
soc/tegra: Fix spelling error in tegra234_lookup_slave_timeout()
soc/tegra: cbb: Drop unnecessary debugfs error handling
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove
soc: mediatek: mtk-devapc: Fix leaking IO map on error paths
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
...
Reset controller updates for v6.14 (v2)
* Add support for A1 SoC in amlogic reset driver.
* Drop aux registration helper from amlogic reset driver.
* tag 'reset-for-v6.14-2' of git://git.pengutronix.de/pza/linux:
reset: amlogic: aux: drop aux registration helper
reset: amlogic: aux: get regmap through parent device
reset: amlogic: add support for A1 SoC in auxiliary reset driver
dt-bindings: reset: add bindings for A1 SoC audio reset controller
clk: amlogic: axg-audio: revert reset implementation
Revert "clk: Fix invalid execution of clk_set_rate"
Link: https://lore.kernel.org/r/20250115170247.1303656-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Having the aux registration helper along with the registered driver is not
great dependency wise. It does not allow the registering driver to be
properly decoupled from the registered auxiliary driver.
Drop the registration helper from the amlogic auxiliary reset driver.
This will be handled in the registering clock driver to start with while
a more generic solution is worked on.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241209-meson-rst-aux-rework-v1-2-d2afb69cc72e@baylibre.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reset controller fixes for v6.13
* Fix rzg2l-usb-vbus-regulator lookup by assigning the proper of node
to the allocated platform device in the rzg2l-usbphy-ctrl driver.
* tag 'reset-fixes-for-v6.13' of git://git.pengutronix.de/pza/linux:
reset: rzg2l-usbphy-ctrl: Assign proper of node to the allocated device
Link: https://lore.kernel.org/r/20250113163642.1757160-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The platform device named "rzg2l-usb-vbus-regulator", allocated by
the rzg2l-usbphy-ctrl driver, is used to instantiate a regulator driver.
This regulator driver is associated with a device tree (DT) node, which
is a child of the rzg2l-usbphy-ctrl DT node. The regulator's DT node allows
consumer nodes to reference the regulator and configure the regulator as
needed.
Starting with commit cd7a38c40b ("regulator: core: do not silently ignore
provided init_data") the struct regulator_dev::dev::of_node is no longer
populated using of_node_get(config->of_node) if the regulator does not
provide init_data. Since the rzg2l-usb-vbus-regulator does not provide
init_data, this behaviour causes the of_find_regulator_by_node() function
to fails, resulting in errors when attempting to request the regulator.
To fix this issue, call device_set_of_node_from_dev() for the
"rzg2l-usb-vbus-regulator" platform device.
Fixes: 84fbd61987 ("regulator: Add Renesas RZ/G2L USB VBUS regulator driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20241119085554.1035881-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull clk updates from Stephen Boyd:
"The core framework gained a clk provider helper, a clk consumer
helper, and some unit tests for the assigned clk rates feature in
DeviceTree. On the vendor driver side, we gained a whole pile of SoC
driver support detailed below. The majority in the diffstat is
Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
additions in here as well. The top vendors is quite common, but the
sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P
SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
SAR2130P
- Global, camera, display, GPU, and video clock controllers for
Qualcomm SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support
for the Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
reset on Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various
binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
dt-bindings: clock: axi-clkgen: include AXI clk
clk: mmp: Add Marvell PXA1908 MPMU driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APBC driver
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Switch to use struct u32_fract instead of custom one
...
Reset controller updates for v6.13
* Split the Amlogic reset-meson driver into platform and auxiliary
bus drivers. Add support for the reset controller in the G12 and
SM1 audio clock controllers.
* Replace the list of boolean parameters to the internal
reset_control_get functions with an enum reset_flags bitfield,
to make the code more self-descriptive.
* Add devres helpers to request pre-deasserted (and automatically
re-asserting during cleanup) reset controls. This allows reducing
boilerplate in drivers that deassert resets for the lifetime of a
device.
* Use the new auto-deasserting devres helpers in reset-uniphier-glue
as an example.
* Add support for the LAN966x PCI device in drivers/misc, as a
dependency for the following reset-microchip-sparx5 patches.
* Add support for being used on the LAN966x PCI device to the
reset-microchip-sparx5 driver.
Commit 86f134941a ("MAINTAINERS: Add the Microchip LAN966x PCI driver
entry") introduces a trivial merge conflict with commit 7280f01e79
("net: lan969x: add match data for lan969x") from the net-next tree [1].
[1] https://lore.kernel.org/all/20241101122505.3eacd183@canb.auug.org.au/
* tag 'reset-for-v6.13' of git://git.pengutronix.de/pza/linux: (21 commits)
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
reset: mchp: sparx5: set the dev member of the reset controller
reset: mchp: sparx5: Allow building as a module
reset: mchp: sparx5: Add MCHP_LAN966X_PCI dependency
reset: mchp: sparx5: Map cpu-syscon locally in case of LAN966x
MAINTAINERS: Add the Microchip LAN966x PCI driver entry
misc: Add support for LAN966x PCI device
reset: uniphier-glue: Use devm_reset_control_bulk_get_shared_deasserted()
reset: Add devres helpers to request pre-deasserted reset controls
reset: replace boolean parameters with flags parameter
reset: amlogic: Fix small whitespace issue
reset: amlogic: add auxiliary reset driver support
reset: amlogic: split the device core and platform probe
reset: amlogic: move drivers to a dedicated directory
reset: amlogic: add reset status support
reset: amlogic: use reset number instead of register count
reset: amlogic: add driver parameters
reset: amlogic: make parameters unsigned
reset: amlogic: use generic data matching function
...
Link: https://lore.kernel.org/r/20241105105229.3729474-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add devres helpers
- devm_reset_control_bulk_get_exclusive_deasserted
- devm_reset_control_bulk_get_optional_exclusive_deasserted
- devm_reset_control_bulk_get_optional_shared_deasserted
- devm_reset_control_bulk_get_shared_deasserted
- devm_reset_control_get_exclusive_deasserted
- devm_reset_control_get_optional_exclusive_deasserted
- devm_reset_control_get_optional_shared_deasserted
- devm_reset_control_get_shared_deasserted
to request and immediately deassert reset controls. During cleanup,
reset_control_assert() will be called automatically on the returned
reset controls.
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240925-reset-get-deasserted-v2-2-b3601bbd0458@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add Mobileye EyeQ reset controller driver, for EyeQ5, EyeQ6L and EyeQ6H
SoCs. Instances belong to a shared register region called OLB and gets
spawned as auxiliary device to the platform driver for clock.
There is one OLB instance for EyeQ5 and EyeQ6L. There are seven OLB
instances on EyeQ6H; three have a reset controller embedded:
- West and east get handled by the same compatible.
- Acc (accelerator) is another one.
Each instance vary in the number and types of reset domains.
Instances with single domain expect a single cell, others two.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-2-00b870a6a2ff@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"
* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...
As soon as the reset controller is registered, it could be used by a
reset consumer. That means hardware setup to be done first and then the
registration of the reset controller. So move the registration of reset
controller at the end of probe().
While at it, fix the issue that the reset is not re-asserted in case
devm_reset_controller_register() fails and also use goto statements to
simplify the error path in probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240610164845.89666-1-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
