Pull arm64 fixes from Will Deacon:
"Ryan's been hard at work finding and fixing mm bugs in the arm64 code,
so here's a small crop of fixes for -rc5.
The main changes are to fix our zapping of non-present PTEs for
hugetlb entries created using the contiguous bit in the page-table
rather than a block entry at the level above. Prior to these fixes, we
were pulling the contiguous bit back out of the PTE in order to
determine the size of the hugetlb page but this is clearly bogus if
the thing isn't present and consequently both the clearing of the
PTE(s) and the TLB invalidation were unreliable.
Although the problem was found by code inspection, we really don't
want this sitting around waiting to trigger and the changes are CC'd
to stable accordingly.
Note that the diffstat looks a lot worse than it really is;
huge_ptep_get_and_clear() now takes a size argument from the core code
and so all the arch implementations of that have been updated in a
pretty mechanical fashion.
- Fix a sporadic boot failure due to incorrect randomization of the
linear map on systems that support it
- Fix the zapping (both clearing the entries *and* invalidating the
TLB) of hugetlb PTEs constructed using the contiguous bit"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Fix flush_hugetlb_tlb_range() invalidation level
arm64: hugetlb: Fix huge_ptep_get_and_clear() for non-present ptes
mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()
arm64/mm: Fix Boot panic on Ampere Altra
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull objtool fixes from Ingo Molnar:
"Fix an objtool false positive, and objtool related build warnings that
happens on PIE-enabled architectures such as LoongArch"
* tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
objtool: Fix C jump table annotations for Clang
vmlinux.lds: Ensure that const vars with relocations are mapped R/O
Pull locking fix from Ingo Molnar:
"Fix an rcuref_put() slowpath race"
* tag 'locking-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcuref: Plug slowpath race in rcuref_put()
Pull block fixes from Jens Axboe:
- Fix plugging for native zone writes
- Fix segment limit settings for != 4K page size archs
- Fix for slab names overflowing
* tag 'block-6.14-20250228' of git://git.kernel.dk/linux:
block: fix 'kmem_cache of name 'bio-108' already exists'
block: Remove zone write plugs when handling native zone append writes
block: make segment size limit workable for > 4K PAGE_SIZE
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the huge_pte is being cleared in huge_ptep_get_and_clear().
Provide for this by adding an `unsigned long sz` parameter to the
function. This follows the same pattern as huge_pte_clear() and
set_huge_pte_at().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, loongarch, mips,
parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed
in a separate commit.
Cc: stable@vger.kernel.org
Fixes: 66b3923a1a ("arm64: hugetlb: add support for PTE contiguous bit")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20250226120656.2400136-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
Pull NFS client fixes from Anna Schumaker:
"Stable Fixes:
- O_DIRECT writes should adjust file length
Other Bugfixes:
- Adjust delegated timestamps for O_DIRECT reads and writes
- Prevent looping due to rpc_signal_task() races
- Fix a deadlock when recovering state on a sillyrenamed file
- Properly handle -ETIMEDOUT errors from tlshd
- Suppress build warnings for unused procfs functions
- Fix memory leak of lsm_contexts"
* tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
lsm,nfs: fix memory leak of lsm_context
sunrpc: suppress warnings for unused procfs functions
SUNRPC: Handle -ETIMEDOUT return from tlshd
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
SUNRPC: Prevent looping due to rpc_signal_task() races
NFS: Adjust delegated timestamps for O_DIRECT reads and writes
NFS: O_DIRECT writes must check and adjust the file length
For devices that natively support zone append operations,
REQ_OP_ZONE_APPEND BIOs are not processed through zone write plugging
and are immediately issued to the zoned device. This means that there is
no write pointer offset tracking done for these operations and that a
zone write plug is not necessary.
However, when receiving a zone append BIO, we may already have a zone
write plug for the target zone if that zone was previously partially
written using regular write operations. In such case, since the write
pointer offset of the zone write plug is not incremented by the amount
of sectors appended to the zone, 2 issues arise:
1) we risk leaving the plug in the disk hash table if the zone is fully
written using zone append or regular write operations, because the
write pointer offset will never reach the "zone full" state.
2) Regular write operations that are issued after zone append operations
will always be failed by blk_zone_wplug_prepare_bio() as the write
pointer alignment check will fail, even if the user correctly
accounted for the zone append operations and issued the regular
writes with a correct sector.
Avoid these issues by immediately removing the zone write plug of zones
that are the target of zone append operations when blk_zone_plug_bio()
is called. The new function blk_zone_wplug_handle_native_zone_append()
implements this for devices that natively support zone append. The
removal of the zone write plug using disk_remove_zone_wplug() requires
aborting all plugged regular write using disk_zone_wplug_abort() as
otherwise the plugged write BIOs would never be executed (with the plug
removed, the completion path will never see again the zone write plug as
disk_get_zone_wplug() will return NULL). Rate-limited warnings are added
to blk_zone_wplug_handle_native_zone_append() and to
disk_zone_wplug_abort() to signal this.
Since blk_zone_wplug_handle_native_zone_append() is called in the hot
path for operations that will not be plugged, disk_get_zone_wplug() is
optimized under the assumption that a user issuing zone append
operations is not at the same time issuing regular writes and that there
are no hashed zone write plugs. The struct gendisk atomic counter
nr_zone_wplugs is added to check this, with this counter incremented in
disk_insert_zone_wplug() and decremented in disk_remove_zone_wplug().
To be consistent with this fix, we do not need to fill the zone write
plug hash table with zone write plugs for zones that are partially
written for a device that supports native zone append operations.
So modify blk_revalidate_seq_zone() to return early to avoid allocating
and inserting a zone write plug for partially written sequential zones
if the device natively supports zone append.
Reported-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Fixes: 9b1ce7f0c6 ("block: Implement zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Link: https://lore.kernel.org/r/20250214041434.82564-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, we report -ETOOSMALL (err) only on the first iteration
(!sent). When we get put_cmsg error after a bunch of successful
put_cmsg calls, we don't signal the error at all. This might be
confusing on the userspace side which will see truncated CMSGs
but no MSG_CTRUNC signal.
Consider the following case:
- sizeof(struct cmsghdr) = 16
- sizeof(struct dmabuf_cmsg) = 24
- total cmsg size (CMSG_LEN) = 40 (16+24)
When calling recvmsg with msg_controllen=60, the userspace
will receive two(!) dmabuf_cmsg(s), the first one will
be a valid one and the second one will be silently truncated. There is no
easy way to discover the truncation besides doing something like
"cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))".
Introduce new put_devmem_cmsg wrapper that reports an error instead
of doing the truncation. Mina suggests that it's the intended way
this API should work.
Note that we might now report MSG_CTRUNC when the users (incorrectly)
call us with msg_control == NULL.
Fixes: 8f0b3cc9a4 ("tcp: RX path for devmem TCP")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250224174401.3582695-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit b530104f50 ("lsm: lsm_context in security_dentry_init_security")
did not preserve the lsm id for subsequent release calls, which results
in a memory leak. Fix it by saving the lsm id in the nfs4_label and
providing it on the subsequent release call.
Fixes: b530104f50 ("lsm: lsm_context in security_dentry_init_security")
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
A C jump table (such as the one used by the BPF interpreter) is a const
global array of absolute code addresses, and this means that the actual
values in the table may not be known until the kernel is booted (e.g.,
when using KASLR or when the kernel VA space is sized dynamically).
When using PIE codegen, the compiler will default to placing such const
global objects in .data.rel.ro (which is annotated as writable), rather
than .rodata (which is annotated as read-only). As C jump tables are
explicitly emitted into .rodata, this used to result in warnings for
LoongArch builds (which uses PIE codegen for the entire kernel) like
Warning: setting incorrect section attributes for .rodata..c_jump_table
due to the fact that the explicitly specified .rodata section inherited
the read-write annotation that the compiler uses for such objects when
using PIE codegen.
This warning was suppressed by explicitly adding the read-only
annotation to the __attribute__((section(""))) string, by commit
c5b1184dec ("compiler.h: specify correct attribute for .rodata..c_jump_table")
Unfortunately, this hack does not work on Clang's integrated assembler,
which happily interprets the appended section type and permission
specifiers as part of the section name, which therefore no longer
matches the hard-coded pattern '.rodata..c_jump_table' that objtool
expects, causing it to emit a warning
kernel/bpf/core.o: warning: objtool: ___bpf_prog_run+0x20: sibling call from callable instruction with modified stack frame
Work around this, by emitting C jump tables into .data.rel.ro instead,
which is treated as .rodata by the linker script for all builds, not
just PIE based ones.
Fixes: c5b1184dec ("compiler.h: specify correct attribute for .rodata..c_jump_table")
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> # on LoongArch
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250221135704.431269-6-ardb+git@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Pull vfs fixes from Christian Brauner:
- Use __readahead_folio() in fuse again to fix a UAF issue
when using splice
- Remove d_op->d_delete method from pidfs
- Remove d_op->d_delete method from nsfs
- Simplify iomap_dio_bio_iter()
- Fix a UAF in ovl_dentry_update_reval
- Fix a miscalulated file range for filemap_fdatawrite_range_kick()
- Don't skip skip dirty page in folio_unmap_invalidate()
* tag 'vfs-6.14-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Minor code simplification in iomap_dio_bio_iter()
nsfs: remove d_op->d_delete
pidfs: remove d_op->d_delete
mm/truncate: don't skip dirty page in folio_unmap_invalidate()
mm/filemap: fix miscalculated file range for filemap_fdatawrite_range_kick()
fuse: don't truncate cached, mutated symlink
ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up
fuse: revert back to __readahead_folio() for readahead
device.h is a huge header which is hard to follow and easy to miss
something. Improve that by splitting devres APIs to device/devres.h.
In particular this helps to speedup the build of the code that includes
device.h solely for a devres APIs.
While at it, cast the error pointers to __iomem using IOMEM_ERR_PTR()
and fix sparse warnings.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Pull rseq fixes from Ingo Molnar:
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y (This debug option is disabled on most
distributions)
* tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix rseq registration with CONFIG_DEBUG_RSEQ
sched: Compact RSEQ concurrency IDs with reduced threads and affinity
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)
- MD pull request via Yu:
- Fix queue limits error handling for raid0, raid1 and raid10
- Fix for a NULL pointer deref in request data mapping
- Code cleanup for request merging
* tag 'block-6.14-20250221' of git://git.kernel.dk/linux:
nvme: only allow entering LIVE from CONNECTING state
nvme-fc: rely on state transitions to handle connectivity loss
apple-nvme: Support coprocessors left idle
apple-nvme: Release power domains when probe fails
nvmet: Use enum definitions instead of hardcoded values
nvme: Cleanup the definition of the controller config register fields
nvme/ioctl: add missing space in err message
nvme-tcp: fix connect failure on receiving partial ICResp PDU
nvme: tcp: Fix compilation warning with W=1
nvmet: pci-epf: Avoid RCU stalls under heavy workload
nvmet: pci-epf: Do not uselessly write the CSTS register
nvmet: pci-epf: Correctly initialize CSTS when enabling the controller
nvmet-rdma: recheck queue state is LIVE in state lock in recv done
nvmet: Fix crash when a namespace is disabled
nvme-tcp: add basic support for the C2HTermReq PDU
nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
block: fix NULL pointer dereferenced within __blk_rq_map_sg
block/merge: remove unnecessary min() with UINT_MAX
md/raid*: Fix the set_queue_limits implementations
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
Pull networking fixes from Paolo Abeni:
"Smaller than usual with no fixes from any subtree.
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev))
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth:
- geneve: fix use-after-free in geneve_find_dev()
- ibmvnic: don't reference skb after sending to VIOS"
* tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: skb: introduce and use a single page frag cache"
net: allow small head cache usage with large MAX_SKB_FRAGS values
nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
tcp: drop secpath at the same time as we currently drop dst
net: axienet: Set mac_managed_pm
arp: switch to dev_getbyhwaddr() in arp_req_set_public()
net: Add non-RCU dev_getbyhwaddr() helper
sctp: Fix undefined behavior in left shift operation
selftests/bpf: Add a specific dst port matching
flow_dissector: Fix port range key handling in BPF conversion
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
flow_dissector: Fix handling of mixed port and port-range keys
geneve: Suppress list corruption splat in geneve_destroy_tunnels().
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
dev: Use rtnl_net_dev_lock() in unregister_netdev().
net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
net: Add net_passive_inc() and net_passive_dec().
net: pse-pd: pd692x0: Fix power limit retrieval
MAINTAINERS: trim the GVE entry
gve: set xdp redirect target only when it is available
...
Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).
It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.
This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes
This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.
The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size. This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.
The solution is to just remove this truncation. This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely. If that happens we'd need to make
this behavior conditional.
Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
After the previous commit is finally safe to revert commit dbae2b0628
("net: skb: introduce and use a single page frag cache"): do it here.
The intended goal of such change was to counter a performance regression
introduced by commit 3226b158e6 ("net: avoid 32 x truesize
under-estimation for tiny skbs").
Unfortunately, the blamed commit introduces another regression for the
virtio_net driver. Such a driver calls napi_alloc_skb() with a tiny
size, so that the whole head frag could fit a 512-byte block.
The single page frag cache uses a 1K fragment for such allocation, and
the additional overhead, under small UDP packets flood, makes the page
allocator a bottleneck.
Thanks to commit bf9f1baa27 ("net: add dedicated kmem_cache for
typical/small skb->head"), this revert does not re-introduce the
original regression. Actually, in the relevant test on top of this
revert, I measure a small but noticeable positive delta, just above
noise level.
The revert itself required some additional mangling due to recent updates
in the affected code.
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: dbae2b0628 ("net: skb: introduce and use a single page frag cache")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 39494194f9 ("SUNRPC: Fix races with rpc_killall_tasks()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Pull sound fixes from Takashi Iwai:
"A slightly large collection of fixes, spread over various drivers.
Almost all are small and device-specific fixes and quirks in ASoC SOF
Intel and AMD, Renesas, Cirrus, HD-audio, in addition to a small fix
for MIDI 2.0"
* tag 'sound-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (41 commits)
ALSA: seq: Drop UMP events when no UMP-conversion is set
ALSA: hda/conexant: Add quirk for HP ProBook 450 G4 mute LED
ALSA: hda/cirrus: Reduce codec resume time
ALSA: hda/cirrus: Correct the full scale volume set logic
virtio_snd.h: clarify that `controls` depends on VIRTIO_SND_F_CTLS
ALSA: hda: Add error check for snd_ctl_rename_id() in snd_hda_create_dig_out_ctls()
ALSA: hda/tas2781: Fix index issue in tas2781 hda SPI driver
ASoC: imx-audmix: remove cpu_mclk which is from cpu dai device
ALSA: hda/realtek: Fixup ALC225 depop procedure
ALSA: hda/tas2781: Update tas2781 hda SPI driver
ASoC: cs35l41: Fix acpi_device_hid() not found
ASoC: SOF: amd: Add branch prediction hint in ACP IRQ handler
ASoC: SOF: amd: Handle IPC replies before FW_BOOT_COMPLETE
ASoC: SOF: amd: Drop unused includes from Vangogh driver
ASoC: SOF: amd: Add post_fw_run_delay ACP quirk
ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt713_vb_l2_rt1320_l13
ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt712_vb + rt1320 support
ALSA: Switch to use hrtimer_setup()
ALSA: hda: hda-intel: add Panther Lake-H support
ASoC: SOF: Intel: pci-ptl: Add support for PTL-H
...
Reorganized the enum used to define the fields of the contrller
configuration (CC) register in include/linux/nvme.h to:
1) Group together all the values defined for each field.
2) Add the missing field masks definitions.
3) Add comments to describe the enum and each field.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Previously, the NVMe/TCP host driver did not handle the C2HTermReq PDU,
instead printing "unsupported pdu type (3)" when received. This patch adds
support for processing the C2HTermReq PDU, allowing the driver
to print the Fatal Error Status field.
Example of output:
nvme nvme4: Received C2HTermReq (FES = Invalid PDU Header Field)
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When a process reduces its number of threads or clears bits in its CPU
affinity mask, the mm_cid allocation should eventually converge towards
smaller values.
However, the change introduced by:
commit 7e019dcc47 ("sched: Improve cache locality of RSEQ concurrency
IDs for intermittent workloads")
adds a per-mm/CPU recent_cid which is never unset unless a thread
migrates.
This is a tradeoff between:
A) Preserving cache locality after a transition from many threads to few
threads, or after reducing the hamming weight of the allowed CPU mask.
B) Making the mm_cid upper bounds wrt nr threads and allowed CPU mask
easy to document and understand.
C) Allowing applications to eventually react to mm_cid compaction after
reduction of the nr threads or allowed CPU mask, making the tracking
of mm_cid compaction easier by shrinking it back towards 0 or not.
D) Making sure applications that periodically reduce and then increase
again the nr threads or allowed CPU mask still benefit from good
cache locality with mm_cid.
Introduce the following changes:
* After shrinking the number of threads or reducing the number of
allowed CPUs, reduce the value of max_nr_cid so expansion of CID
allocation will preserve cache locality if the number of threads or
allowed CPUs increase again.
* Only re-use a recent_cid if it is within the max_nr_cid upper bound,
else find the first available CID.
Fixes: 7e019dcc47 ("sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lkml.kernel.org/r/20250210153253.460471-2-gmonaco@redhat.com
Pull vfs fixes from Christian Brauner:
"It was reported that the acct(2) system call can be used to trigger a
NULL deref in cases where it is set to write to a file that triggers
an internal lookup.
This can e.g., happen when pointing acct(2) to /sys/power/resume. At
the point the where the write to this file happens the calling task
has already exited and called exit_fs() but an internal lookup might
be triggered through lookup_bdev(). This may trigger a NULL-deref when
accessing current->fs.
Reorganize the code so that the the final write happens from the
workqueue but with the caller's credentials. This preserves the
(strange) permission model and has almost no regression risk.
Also block access to kernel internal filesystems as well as procfs and
sysfs in the first place.
Various fixes for netfslib:
- Fix a number of read-retry hangs, including:
- Incorrect getting/putting of references on subreqs as we retry
them
- Failure to track whether a last old subrequest in a retried set
is superfluous
- Inconsistency in the usage of wait queues used for subrequests
(ie. using clear_and_wake_up_bit() whilst waiting on a private
waitqueue)
- Add stats counters for retries and publish in /proc/fs/netfs/stats.
This is not a fix per se, but is useful in debugging and shouldn't
otherwise change the operation of the code
- Fix the ordering of queuing subrequests with respect to setting the
request flag that says we've now queued them all"
* tag 'vfs-6.14-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix setting NETFS_RREQ_ALL_QUEUED to be after all subreqs queued
netfs: Add retry stat counters
netfs: Fix a number of read-retry hangs
acct: block access to kernel internal filesystems
acct: perform last write from workqueue
Merge series from broonie@kernel.org:
This is a random subset of the patches for the tas2764 driver that I
found in the Asahi Linux tree which seemed to be clear fixes and
improvements which apply easily to mainline without much effort, there's
a bunch more work on the driver that should also be applicable.
I've only build tested this.
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
KVM fixes for 6.14 part 1
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be
loaded before KVM module. In case of module loading any dependent
modules are automatically loaded but in case of built-in modules there
is no inherent mechanism available to specify dependencies between
modules and ensure that any dependent modules are loaded implicitly.
Add a new external API interface for PSP module initialization which
allows PSP SEV driver to be loaded explicitly if KVM is built-in.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull EFI fixes from Ard Biesheuvel:
"Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute
into account when placing the kernel image in memory at boot.
Otherwise, the presence of the kernel image could prevent such a
memory region from being unplugged at runtime if it was 'cold
plugged', i.e., already plugged in at boot time (and exposed via the
EFI memory map).
This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory
attribute is used consistently by Linux before it ever turns up in
production, ensuring that we can make meaningful use of it without
running the risk of regressing existing users"
* tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Use BIT_ULL() constants for memory attributes
efi: Avoid cold plugged memory for placing the kernel
Pull block fixes from Jens Axboe:
- Fix for request rejection for batch addition
- Fix a few issues for bogus mac partition tables
* tag 'block-6.14-20250214' of git://git.kernel.dk/linux:
partitions: mac: fix handling of bogus partition table
block: cleanup and fix batch completion adding conditions
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
The conditions for whether or not a request is allowed adding to a
completion batch are a bit hard to read, and they also have a few
issues. One is that ioerror may indeed be a random value on passthrough,
and it's being checked unconditionally of whether or not the given
request is a passthrough request or not.
Rewrite the conditions to be separate for easier reading, and only check
ioerror for non-passthrough requests. This fixes an issue with bio
unmapping on passthrough, where it fails getting added to a batch. This
both leads to suboptimal performance, and may trigger a potential
schedule-under-atomic condition for polled passthrough IO.
Fixes: f794f3351f ("block: add support for blk_mq_end_request_batch()")
Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix a number of hangs in the netfslib read-retry code, including:
(1) netfs_reissue_read() doubles up the getting of references on
subrequests, thereby leaking the subrequest and causing inode eviction
to wait indefinitely. This can lead to the kernel reporting a hang in
the filesystem's evict_inode().
Fix this by removing the get from netfs_reissue_read() and adding one
to netfs_retry_read_subrequests() to deal with the one place that
didn't double up.
(2) The loop in netfs_retry_read_subrequests() that retries a sequence of
failed subrequests doesn't record whether or not it retried the one
that the "subreq" pointer points to when it leaves the loop. It may
not if renegotiation/repreparation of the subrequests means that fewer
subrequests are needed to span the cumulative range of the sequence.
Because it doesn't record this, the piece of code that discards
now-superfluous subrequests doesn't know whether it should discard the
one "subreq" points to - and so it doesn't.
Fix this by noting whether the last subreq it examines is superfluous
and if it is, then getting rid of it and all subsequent subrequests.
If that one one wasn't superfluous, then we would have tried to go
round the previous loop again and so there can be no further unretried
subrequests in the sequence.
(3) netfs_retry_read_subrequests() gets yet an extra ref on any additional
subrequests it has to get because it ran out of ones it could reuse to
to renegotiation/repreparation shrinking the subrequests.
Fix this by removing that extra ref.
(4) In netfs_retry_reads(), it was using wait_on_bit() to wait for
NETFS_SREQ_IN_PROGRESS to be cleared on all subrequests in the
sequence - but netfs_read_subreq_terminated() is now using a wait
queue on the request instead and so this wait will never finish.
Fix this by waiting on the wait queue instead. To make this work, a
new flag, NETFS_RREQ_RETRYING, is now set around the wait loop to tell
the wake-up code to wake up the wait queue rather than requeuing the
request's work item.
Note that this flag replaces the NETFS_RREQ_NEED_RETRY flag which is
no longer used.
(5) Whilst not strictly anything to do with the hang,
netfs_retry_read_subrequests() was also doubly incrementing the
subreq_counter and re-setting the debug index, leaving a gap in the
trace. This is also fixed.
One of these hangs was observed with 9p and with cifs. Others were forced
by manual code injection into fs/afs/file.c. Firstly, afs_prepare_read()
was created to provide an changing pattern of maximum subrequest sizes:
static int afs_prepare_read(struct netfs_io_subrequest *subreq)
{
struct netfs_io_request *rreq = subreq->rreq;
if (!S_ISREG(subreq->rreq->inode->i_mode))
return 0;
if (subreq->retry_count < 20)
rreq->io_streams[0].sreq_max_len =
umax(200, 2222 - subreq->retry_count * 40);
else
rreq->io_streams[0].sreq_max_len = 3333;
return 0;
}
and pointed to by afs_req_ops. Then the following:
struct netfs_io_subrequest *subreq = op->fetch.subreq;
if (subreq->error == 0 &&
S_ISREG(subreq->rreq->inode->i_mode) &&
subreq->retry_count < 20) {
subreq->transferred = subreq->already_done;
__clear_bit(NETFS_SREQ_HIT_EOF, &subreq->flags);
__set_bit(NETFS_SREQ_NEED_RETRY, &subreq->flags);
afs_fetch_data_notify(op);
return;
}
was inserted into afs_fetch_data_success() at the beginning and struct
netfs_io_subrequest given an extra field, "already_done" that was set to
the value in "subreq->transferred" by netfs_reissue_read().
When reading a 4K file, the subrequests would get gradually smaller, a new
subrequest would be allocated around the 3rd retry and then eventually be
rendered superfluous when the 20th retry was hit and the limit on the first
subrequest was eased.
Fixes: e2d46f2ec3 ("netfs: Change the read result collector to only use one work item")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250212222402.3618494-2-dhowells@redhat.com
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Steve French <stfrench@microsoft.com>
cc: Ihor Solodrai <ihor.solodrai@pm.me>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
