Vulkan can't support DCC and Z/S compression on GFX12 without
WRITE_COMPRESS_DISABLE in this commit or a completely different DCC
interface.
AMDGPU_TILING_GFX12_SCANOUT is added because it's already used by userspace.
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
Groups can be killed during a reset even though they did nothing wrong.
That usually happens when the FW is put in a bad state by other groups,
resulting in group suspension failures when the reset happens.
If we end up in that situation, flag the group innocent and report
innocence through a new DRM_PANTHOR_GROUP_STATE flag.
Bump the minor driver version to reflect the uAPI change.
Changes in v4:
- Add an entry to the driver version changelog
- Add R-bs
Changes in v3:
- Actually report innocence to userspace
Changes in v2:
- New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211080500.2349505-1-boris.brezillon@collabora.com
Add SET_STATE ioctl to configure device power mode for aie2 device.
Three modes are supported initially.
POWER_MODE_DEFAULT: Enable clock gating and set DPM (Dynamic Power
Management) level to value which has been set by resource solver or
maximum DPM level the device supports.
POWER_MODE_HIGH: Enable clock gating and set DPM level to maximum DPM
level the device supports.
POWER_MODE_TURBO: Disable clock gating and set DPM level to maximum DPM
level the device supports.
Disabling clock gating means all clocks always run on full speed. And
the different clock frequency are used based on DPM level been set.
Initially, the driver set the power mode to default mode.
Co-developed-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Signed-off-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-4-lizhi.hou@amd.com
Add a new property called DRM_XE_OA_PROPERTY_OA_BUFFER_SIZE to
allow OA buffer size to be configurable from userspace.
With this OA buffer size can be configured to any power of 2
size between 128KB and 128MB and it would default to 16MB in case
the size is not supplied.
v2:
- Rebase
v3:
- Add oa buffer size to capabilities [Ashutosh]
- Address several nitpicks [Ashutosh]
- Fix commit message/subject [Ashutosh]
BSpec: 61100, 61228
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241205041913.883767-2-sai.teja.pottumuttu@intel.com
There different types of BOs are supported:
- shmem
A user application uses shmem BOs as input/output for its workload running
on NPU.
- device memory heap
The fixed size buffer dedicated to the device.
- device buffer
The buffer object allocated from device memory heap.
- command buffer
The buffer object created for delivering commands. The command buffer
object is small and pinned on creation.
New IOCTLs are added: CREATE_BO, GET_BO_INFO, SYNC_BO. SYNC_BO is used
to explicitly flush CPU cache for BO memory.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-7-lizhi.hou@amd.com
The hardware can be shared among multiple user applications. The
hardware resources are allocated/freed based on the request from
user application via driver IOCTLs.
DRM_IOCTL_AMDXDNA_CREATE_HWCTX
Allocate tile columns and create a hardware context structure to track the
usage and status of the resources. A hardware context ID is returned for
XDNA command execution.
DRM_IOCTL_AMDXDNA_DESTROY_HWCTX
Release hardware context based on its ID. The tile columns belong to
this hardware context will be reclaimed.
DRM_IOCTL_AMDXDNA_CONFIG_HWCTX
Config hardware context. Bind the hardware context to the required
resources.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-6-lizhi.hou@amd.com
UAPI Changes:
- Define and parse OA sync properties (Ashutosh)
Driver Changes:
- Add caller info to xe_gt_reset_async (Nirmoy)
- A large forcewake rework / cleanup (Himal)
- A g2h response timeout fix (Badal)
- A PTL workaround (Vinay)
- Handle unreliable MMIO reads during forcewake (Shuicheng)
- Ufence user-space access fixes (Nirmoy)
- Annotate flexible arrays (Matthew Brost)
- Enable GuC lite restore (Fei)
- Prevent GuC register capture on VF (Zhanjun)
- Show VFs VRAM / LMEM provisioning summary over debugfs (Michal)
- Parallel queues fix on GT reset (Nirmoy)
- Move reference grabbing to a job's dma-fence (Matt Brost)
- Mark a number of local workqueues WQ_MEM_RECLAIM (Matt Brost)
- OA synchronization support (Ashutosh)
- Capture all available bits of GuC timestamp to GuC log (John)
- Increase readability of guc_info debugfs (John)
- Add a mmio barrier before GGTT invalidate (Matt Brost)
- Don't short-circuit TDR on jobs not started (Matt Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZyNvA_vZZYR-1eWE@fedora
Updates for v6.13
Core:
- Switch to aperture_remove_all_conflicting_devices()
- Simplify msm_disp_state_dump_regs()
DPU:
- Add SA8775P support
- Add (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996
support
- Enable support for larger framebuffers (required for X.Org working
with several outputs)
- Dropped LM_3, LM_4 (MSM8998, SDM845)
- Fixed DSPP_3 routing on SDM845
DP:
- Add SA8775P support
HDMI:
- Mark two arrays as const in MSM8998 HDMI PHY driver
GPU:
- a7xx preemption support
- Adreno A663 support
- Typos fixes, etc
- Fix excessive stack usage in a6xx GMU
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt7k8zDHsg2Uzx9apzyQMut8XdLXMQSRNn7WArdPUV5Qw@mail.gmail.com
On PTL platforms with media version 30.00, the fuse registers for
reporting L3 bank availability to the GT just read out as ~0 and do not
provide proper values. Xe does not use the L3 bank mask for anything
internally; it only passes the mask through to userspace via the GT
topology query.
Since we don't have any way to get the real L3 bank mask, we don't want
to pass garbage to userspace. Passing a zeroed mask or a copy of the
primary GT's L3 bank mask would also be inaccurate and likely to cause
confusion for userspace. The best approach is to simply not include L3
in the list of masks returned by the topology query in cases where we
aren't able to provide a meaningful value. This won't change the
behavior for any existing platforms (where we can always obtain L3 masks
successfully for all GTs), it will only prevent us from mis-reporting
bad information on upcoming platform(s).
There's a good chance this will become a formal workaround in the
future, but for now we don't have a lineage number so "no_media_l3" is
used in place of a lineage as the OOB workaround descriptor.
v2:
- Re-calculate query size to properly match data returned. (Gustavo)
- Update kerneldoc to clarify that the L3bank mask may not be included
in the query results if the hardware doesn't make it available.
(Gustavo)
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007154143.2021124-2-matthew.d.roper@intel.com
Some userspace changes are necessary so add a flag for userspace to
advertise support for preemption when creating the submitqueue.
When this flag is not set preemption will not be allowed in the middle
of the submitted IBs therefore mantaining compatibility with older
userspace.
The flag is rejected if preemption is not supported on the target, this
allows userspace to know whether preemption is supported.
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618028/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Expose allowed group priorities with a new device query.
This new uAPI will be used in Mesa to properly report what priorities a
user can use for EGL_IMG_context_priority.
Since this extends the uAPI and because userland needs a way to
advertise priorities accordingly, this also bumps the driver minor
version.
v2:
- Remove drm_panthor_group_allow_priority_flags definition
- Document that allowed_mask is a bitmask of drm_panthor_group_priority
v3:
- Use BIT macro in panthor_query_group_priorities_info
- Add r-b from Steven Price and Boris Brezillon
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909064820.34982-4-mary.guillemard@collabora.com
Thomas needs 5a498d4d06 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Expose timestamp information supported by the GPU with a new device
query.
Mali uses an external timer as GPU system time. On ARM, this is wired to
the generic arch timer so we wire cntfrq_el0 as device frequency.
This new uAPI will be used in Mesa to implement timestamp queries and
VK_KHR_calibrated_timestamps.
Since this extends the uAPI and because userland needs a way to advertise
those features conditionally, this also bumps the driver minor version.
v2:
- Rewrote to use GPU timestamp register
- Added timestamp_offset to drm_panthor_timestamp_info
- Add missing include for arch_timer_get_cntfrq
- Rework commit message
v3:
- Add panthor_gpu_read_64bit_counter
- Change panthor_gpu_read_timestamp to use
panthor_gpu_read_64bit_counter
v4:
- Fix multiple typos in uAPI documentation
- Mention behavior when the timestamp frequency is unknown
- Use u64 instead of unsigned long long
for panthor_gpu_read_timestamp
- Apply r-b from Mihail
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830080349.24736-2-mary.guillemard@collabora.com
Extend the uAPI with a new job requirement flag for cycle
counters. This requirement is used by userland to indicate that a job
requires cycle counters or system timestamp to be propagated. (for use
with write value timestamp jobs)
We cannot enable cycle counters unconditionally as this would result in
an increase of GPU power consumption. As a result, they should be left
off unless required by the application.
If a job requires cycle counters or system timestamps propagation, we
must enable cycle counting before issuing a job and disable it right
after the job completes.
Since this extends the uAPI and because userland needs a way to advertise
features like VK_KHR_shader_clock conditionally, we bumps the driver
minor version.
v2:
- Rework commit message
- Squash uAPI changes and implementation in this commit
- Simplify changes based on Steven Price comments
v3:
- Add Steven Price r-b
- Fix a codestyle issue
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240819080224.24914-3-mary.guillemard@collabora.com
Expose system timestamp and frequency supported by the GPU.
Mali uses an external timer as GPU system time. On ARM, this is wired to
the generic arch timer so we wire cntfrq_el0 as device frequency.
This new uAPI will be used in Mesa to implement timestamp queries and
VK_KHR_calibrated_timestamps.
v2:
- Rewrote to use GPU timestamp register
- Add missing include for arch_timer_get_cntfrq
- Rework commit message
v3:
- Move panfrost_cycle_counter_get and panfrost_cycle_counter_put to
panfrost_ioctl_query_timestamp
- Handle possible overflow in panfrost_timestamp_read
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240819080224.24914-2-mary.guillemard@collabora.com
Need to take some Xe bo definition in here before
we can add the BMG display 64k aligned size restrictions.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When building with gcc-5:
In function ‘decode_oa_format.isra.26’,
inlined from ‘xe_oa_set_prop_oa_format’ at drivers/gpu/drm/xe/xe_oa.c:1664:6:
././include/linux/compiler_types.h:510:38: error: call to ‘__compiletime_assert_1336’ declared with attribute error: FIELD_GET: mask is not constant
[...]
./include/linux/bitfield.h:155:3: note: in expansion of macro ‘__BF_FIELD_CHECK’
__BF_FIELD_CHECK(_mask, _reg, 0U, "FIELD_GET: "); \
^
drivers/gpu/drm/xe/xe_oa.c:1573:18: note: in expansion of macro ‘FIELD_GET’
u32 bc_report = FIELD_GET(DRM_XE_OA_FORMAT_MASK_BC_REPORT, fmt);
^
Fixes: b6fd51c621 ("drm/xe/oa/uapi: Define and parse OA stream properties")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729092634.2227611-1-geert+renesas@glider.be
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit f2881dfdaa)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
