Pull objtool fixes from Ingo Molnar:
"Fix an objtool false positive, and objtool related build warnings that
happens on PIE-enabled architectures such as LoongArch"
* tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
objtool: Fix C jump table annotations for Clang
vmlinux.lds: Ensure that const vars with relocations are mapped R/O
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com
Fixes: e85c5e9792 ("selftests/ftrace: Update fprobe test to check enabled_functions file")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf2704242 ("net: selftest: add test for netdev netlink queue-get API")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix tools/ quiet build Makefile infrastructure that was broken when
working on tools/perf/ without testing on other tools/ living
utilities.
* tag 'perf-tools-fixes-for-v6.14-2-2025-02-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools: Remove redundant quiet setup
tools: Unify top-level quiet infrastructure
Fix the following objtool warning during build time:
fs/bcachefs/btree_cache.o: warning: objtool: btree_node_lock.constprop.0() falls through to next function bch2_recalc_btree_reserve()
fs/bcachefs/btree_update.o: warning: objtool: bch2_trans_update_get_key_cache() falls through to next function need_whiteout_for_snapshot()
bch2_trans_unlocked_or_in_restart_error() is an Obviously Correct (tm)
panic() wrapper, add it to the list of known noreturns.
Fixes: b318882022 ("bcachefs: bch2_trans_verify_not_unlocked_or_in_restart()")
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20250218064230.219997-1-youling.tang@linux.dev
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
A C jump table (such as the one used by the BPF interpreter) is a const
global array of absolute code addresses, and this means that the actual
values in the table may not be known until the kernel is booted (e.g.,
when using KASLR or when the kernel VA space is sized dynamically).
When using PIE codegen, the compiler will default to placing such const
global objects in .data.rel.ro (which is annotated as writable), rather
than .rodata (which is annotated as read-only). As C jump tables are
explicitly emitted into .rodata, this used to result in warnings for
LoongArch builds (which uses PIE codegen for the entire kernel) like
Warning: setting incorrect section attributes for .rodata..c_jump_table
due to the fact that the explicitly specified .rodata section inherited
the read-write annotation that the compiler uses for such objects when
using PIE codegen.
This warning was suppressed by explicitly adding the read-only
annotation to the __attribute__((section(""))) string, by commit
c5b1184dec ("compiler.h: specify correct attribute for .rodata..c_jump_table")
Unfortunately, this hack does not work on Clang's integrated assembler,
which happily interprets the appended section type and permission
specifiers as part of the section name, which therefore no longer
matches the hard-coded pattern '.rodata..c_jump_table' that objtool
expects, causing it to emit a warning
kernel/bpf/core.o: warning: objtool: ___bpf_prog_run+0x20: sibling call from callable instruction with modified stack frame
Work around this, by emitting C jump tables into .data.rel.ro instead,
which is treated as .rodata by the linker script for all builds, not
just PIE based ones.
Fixes: c5b1184dec ("compiler.h: specify correct attribute for .rodata..c_jump_table")
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> # on LoongArch
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250221135704.431269-6-ardb+git@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for cacheinfo DT probing to avoid reading non-boolean
properties as booleans.
- A fix for cpufeature to use bitmap_equal() instead of memcmp(), so
unused bits are ignored.
- Fixes for cmpxchg and futex cmpxchg that properly encode the sign
extension requirements on inline asm, which results in spurious
successes. This manifests in at least inode_set_ctime_current, but is
likely just a disaster waiting to happen.
- A fix for the rseq selftests, which was using an invalid constraint.
- A pair of fixes for signal frame size handling:
- We were reserving space for an extra empty extension context
header on systems with extended signal context, thus resulting in
unnecessarily large allocations.
- We weren't properly checking for available extensions before
calculating the signal stack size, which resulted in undersized
stack allocations on some systems (at least those with T-Head
custom vectors).
Also, we've added Alex as a reviewer. He's been helping out a ton
lately, thanks!
* tag 'riscv-for-linus-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add myself as a riscv reviewer
riscv: signal: fix signal_minsigstksz
riscv: signal: fix signal frame size
rseq/selftests: Fix riscv rseq_offset_deref_addv inline asm
riscv/futex: sign extend compare value in atomic cmpxchg
riscv/atomic: Do proper sign extension also for unsigned in arch_cmpxchg
riscv: cpufeature: use bitmap_equal() instead of memcmp()
riscv: cacheinfo: Use of_property_present() for non-boolean properties
Test XDP and HDS interaction. While at it add a test for using the IOCTL,
as that turned out to be the real culprit.
Testing bnxt:
# NETIF=eth0 ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
and netdevsim:
# ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Netdevsim needs a sane default for tx/rx ring size.
ethtool 6.11 is needed for the --disable-netlink option.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250221025141.1132944-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some tools like KGraphViewer interpret the "ON" nodes not having an
explicitly set fill colour as them being entirely black, which obscures
the text on them and looks funny. In fact, I thought they were off for
the longest time. Comparing to the output of the `dot` tool, I assume
they are supposed to be white.
Instead of speclawyering over who's in the wrong and must immediately
atone for their wickedness at the altar of RFC2119, just be explicit
about it, set the fillcolor to white, and nobody gets confused.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250221-dapm-graph-node-colour-v1-1-514ed0aa7069@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
A few bugs were found in the fprobe accounting logic along with it using
the function graph infrastructure. Update the fprobe selftest to catch
those bugs in case they or something similar shows up in the future.
The test now checks the enabled_functions file which shows all the
functions attached to ftrace or fgraph. When enabling a fprobe, make sure
that its corresponding function is also added to that file. Also add two
more fprobes to enable to make sure that the fprobe logic works properly
with multiple probes.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.733001756@goodmis.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
Pull networking fixes from Paolo Abeni:
"Smaller than usual with no fixes from any subtree.
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev))
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth:
- geneve: fix use-after-free in geneve_find_dev()
- ibmvnic: don't reference skb after sending to VIOS"
* tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: skb: introduce and use a single page frag cache"
net: allow small head cache usage with large MAX_SKB_FRAGS values
nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
tcp: drop secpath at the same time as we currently drop dst
net: axienet: Set mac_managed_pm
arp: switch to dev_getbyhwaddr() in arp_req_set_public()
net: Add non-RCU dev_getbyhwaddr() helper
sctp: Fix undefined behavior in left shift operation
selftests/bpf: Add a specific dst port matching
flow_dissector: Fix port range key handling in BPF conversion
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
flow_dissector: Fix handling of mixed port and port-range keys
geneve: Suppress list corruption splat in geneve_destroy_tunnels().
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
dev: Use rtnl_net_dev_lock() in unregister_netdev().
net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
net: Add net_passive_inc() and net_passive_dec().
net: pse-pd: pd692x0: Fix power limit retrieval
MAINTAINERS: trim the GVE entry
gve: set xdp redirect target only when it is available
...
Verify that for a connectible AF_VSOCK socket, merely having a transport
assigned is insufficient; socket must be connected for the sockmap to
accept.
This does not test datagram vsocks. Even though it hardly matters. VMCI is
the only transport that features VSOCK_TRANSPORT_F_DGRAM, but it has an
unimplemented vsock_transport::readskb() callback, making it unsupported by
BPF/sockmap.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 515745445e ("selftest/bpf: Add test for vsock removal from sockmap
on close()") added test that checked if proto::close() callback was invoked
on AF_VSOCK socket release. I.e. it verified that a close()d vsock does
indeed get removed from the sockmap.
It was done simply by creating a socket pair and attempting to replace a
close()d one with its peer. Since, due to a recent change, sockmap does not
allow updating index with a non-established connectible vsock, redo it with
a freshly established one.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
getdelays had a compilation issue because the format string was not
updated when the "delay min" was added. For example, after adding the
"delay min" in printf, there were 7 strings but only 6 "%s" format
specifiers. Similarly, after adding the 't->cpu_delay_total', there were
7 variables but only 6 format characters specifiers, causing compilation
issues as follows. This commit fixes these issues to ensure that
getdelays compiles correctly.
root@xx:~/linux-next/tools/accounting$ make
getdelays.c:199:9: warning: format `%llu' expects argument of type
`long long unsigned int', but argument 8 has type `char *' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
216 | "delay total", "delay average", "delay max", "delay min",
| ~~~~~~~~~~~
| |
| char *
getdelays.c:200:21: note: format string is defined here
200 | " %15llu%15llu%15llu%15llu%15.3fms%13.6fms\n"
| ~~~~~^
| |
| long long unsigned int
| %15s
getdelays.c:199:9: warning: format `%f' expects argument of type
`double', but argument 12 has type `long long unsigned int' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
220 | (unsigned long long)t->cpu_delay_total,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long long unsigned int
.....
Link: https://lkml.kernel.org/r/20250208144400544RduNRhwIpT3m2JyRBqskZ@zte.com.cn
Fixes: f65c64f311 ("delayacct: add delay min to record delay peak")
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: Qiang Tu <tu.qiang35@zte.com.cn>
Cc: wangyong <wang.yong12@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull objtool fixes from Borislav Petkov:
- Move a warning about a lld.ld breakage into the verbose setting as
said breakage has been fixed in the meantime
- Teach objtool to ignore dangling jump table entries added by Clang
* tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Move dodgy linker warn to verbose
objtool: Ignore dangling jump table entries
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
Pull rust fixes from Miguel Ojeda:
- Fix objtool warning due to future Rust 1.85.0 (to be released in a
few days)
- Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning
* tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: rbtree: fix overindented list item
objtool/rust: add one more `noreturn` Rust function
When working on OpenRISC support for restartable sequences I noticed
and fixed these two issues with the riscv support bits.
1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly
passed to the macro. Fix this by adding 'inc' to the list of macro
arguments.
2 The inline asm input constraints for 'inc' and 'off' use "er", The
riscv gcc port does not have an "e" constraint, this looks to be
copied from the x86 port. Fix this by just using an "r" constraint.
I have compile tested this only for riscv. However, the same fixes I
use in the OpenRISC rseq selftests and everything passes with no issues.
Fixes: 171586a6ab ("selftests/rseq: riscv: Template memory ordering and percpu access mode")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250114170721.3613280-1-shorne@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull sched_ext fixes from Tejun Heo:
- Fix lock imbalance in a corner case of dispatch_to_local_dsq()
- Migration disabled tasks were confusing some BPF schedulers and its
handling had a bug. Fix it and simplify the default behavior by
dispatching them automatically
- ops.tick(), ops.disable() and ops.exit_task() were incorrectly
disallowing kfuncs that require the task argument to be the rq
operation is currently operating on and thus is rq-locked.
Allow them.
- Fix autogroup migration handling bug which was occasionally
triggering a warning in the cgroup migration path
- tools/sched_ext, selftest and other misc updates
* tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
sched_ext: selftests: Fix grammar in tests description
sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq()
sched_ext: Fix migration disabled handling in targeted dispatches
sched_ext: Implement auto local dispatching of migration disabled tasks
sched_ext: Fix incorrect time delta calculation in time_delta()
sched_ext: Fix lock imbalance in dispatch_to_local_dsq()
sched_ext: selftests/dsp_local_on: Fix selftest on UP systems
tools/sched_ext: Add helper to check task migration state
sched_ext: Fix incorrect autogroup migration detection
sched_ext: selftests/dsp_local_on: Fix sporadic failures
selftests/sched_ext: Fix enum resolution
sched_ext: Include task weight in the error state dump
sched_ext: Fixes typos in comments
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
Since commit 5155cbcdbf ("af_unix: Add a prompt to
CONFIG_AF_UNIX_OOB"), the Landlock selftests's configuration is not
enough to build a minimal kernel. Because scoped_signal_test checks
with the MSG_OOB flag, we need to enable CONFIG_AF_UNIX_OOB for tests:
# RUN fown.no_sandbox.sigurg_socket ...
# scoped_signal_test.c:420:sigurg_socket:Expected 1 (1) == send(client_socket, ".", 1, MSG_OOB) (-1)
# sigurg_socket: Test terminated by assertion
# FAIL fown.no_sandbox.sigurg_socket
...
Cc: Günther Noack <gnoack@google.com>
Acked-by: Florent Revest <revest@chromium.org>
Link: https://lore.kernel.org/r/20250211132531.1625566-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
Now BPF only supports bpf_list_push_{front,back}_impl kfunc, not bpf_list_
push_{front,back}.
This patch fix this issue. Without this patch, if we use bpf_list kfunc
in scx, the BPF verifier would complain:
libbpf: extern (func ksym) 'bpf_list_push_back': not found in kernel or
module BTFs
libbpf: failed to load object 'scx_foo'
libbpf: failed to load BPF skeleton 'scx_foo': -EINVAL
With this patch, the bpf list kfunc will work as expected.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Fixes: 2a52ca7c98 ("sched_ext: Add scx_simple and scx_example_qmap example schedulers")
Signed-off-by: Tejun Heo <tj@kernel.org>
Starting with Rust 1.85.0 (currently in beta, to be released 2025-02-20),
under some kernel configurations with `CONFIG_RUST_DEBUG_ASSERTIONS=y`,
one may trigger a new `objtool` warning:
rust/kernel.o: warning: objtool: _R...securityNtB2_11SecurityCtx8as_bytes()
falls through to next function _R...core3ops4drop4Drop4drop()
due to a call to the `noreturn` symbol:
core::panicking::assert_failed::<usize, usize>
Thus add it to the list so that `objtool` knows it is actually `noreturn`.
Do so matching with `strstr` since it is a generic.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250112143951.751139-1-ojeda@kernel.org
[ Updated Cc: stable@ to include 6.13.y. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Allocate, get, and free the CPUID array in the Hyper-V CPUID test in the
test's core helper, instead of copy+pasting code at each call site. In
addition to deduplicating a small amount of code, restricting visibility
of the array to a single invocation of the core test prevents "leaking" an
array across test cases. Passing in @vcpu to the helper will also allow
pivoting on VM-scoped information without needing to pass more booleans,
e.g. to conditionally assert on features that require an in-kernel APIC.
To avoid use-after-free bugs due to overzealous and careless developers,
opportunstically add a comment to explain that the system-scoped helper
caches the Hyper-V CPUID entries, i.e. that the caller is not responsible
for freeing the memory.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
Pull seccomp fix from Kees Cook:
"This is really a work-around for x86_64 having grown a syscall to
implement uretprobe, which has caused problems since v6.11.
This may change in the future, but for now, this fixes the unintended
seccomp filtering when uretprobe switched away from traps, and does so
with something that should be easy to backport.
- Allow uretprobe on x86_64 to avoid behavioral complications (Eyal
Birger)"
* tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: validate uretprobe syscall passes through seccomp
seccomp: passthrough uretprobe systemcall without filtering
The lld.ld borkage is fixed in the latest llvm release (?) but will
not be backported, meaning we're stuck with broken linker for a fair
while.
Lets not spam all clang build logs and move warning to verbose.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
