Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Support new EC if the memory region information comes from the CRS
ACPI resource descriptor in cros_ec_lpc
Improvements:
- Make sure EC is in RW before probing
- Only check events on MKBP notifies to reduce the number of query
commands in cros_ec_lpc
Cleanups:
- Remove unused code and DT bindings for cros-kbd-led-backlight
- Constify 'struct bin_attribute' in cros_ec_vbc
- Use str_enabled_disabled() in cros_usbpd_logger"
* tag 'chrome-platform-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_lpc: Handle EC without CRS section
platform/chrome: cros_usbpd_logger: Use str_enabled_disabled() helper
platform/chrome: cros_ec_lpc: Support direct EC register memory access
platform/chrome: cros_ec_lpc: Merge lpc_driver_ops into ec private structure
platform/chrome: Update ChromeOS EC command tracing
platform/chrome: cros_ec_lpc: Only check for events on MKBP notifies
platform/chrome: cros_ec_vbc: Constify 'struct bin_attribute'
dt-bindings: cros-ec: Remove google,cros-kbd-led-backlight
platform/chrome: cros_kbd_led_backlight: Remove OF match
platform/chrome: cros_ec_proto: remove unnecessary retries
platform/chrome: cros_ec: jump to RW before probing
platform/chrome: cros_kbd_led_backlight: remove unneeded if-statement
Pull drm updates from Dave Airlie:
"There are two external interactions of note, the msm tree pull in some
opp tree, hopefully the opp tree arrives from the same git tree
however it normally does.
There is also a new cgroup controller for device memory, that is used
by drm, so is merging through my tree. This will hopefully help open
up gpu cgroup usage a bit more and move us forward.
There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs.
Then the usual xe/amdgpu/i915/msm leaders and lots of changes and
refactors across the board:
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on
suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine
instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two
SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling"
* tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits)
drm/bridge: fix documentation for the hdmi_audio_prepare() callback
doc/cgroup: Fix title underline length
drm/doc: Include new drm-compute documentation
cgroup/dmem: Fix parameters documentation
cgroup/dmem: Select PAGE_COUNTER
kernel/cgroup: Remove the unused variable climit
drm/display: hdmi: Do not read EDID on disconnected connectors
drm/tests: hdmi: Add connector disablement test
drm/connector: hdmi: Do atomic check when necessary
drm/amd/display: 3.2.316
drm/amd/display: avoid reset DTBCLK at clock init
drm/amd/display: improve dpia pre-train
drm/amd/display: Apply DML21 Patches
drm/amd/display: Use HW lock mgr for PSR1
drm/amd/display: Revised for Replay Pseudo vblank control
drm/amd/display: Add a new flag for replay low hz
drm/amd/display: Remove unused read_ono_state function from Hwss module
drm/amd/display: Do not elevate mem_type change to full update
drm/amd/display: Do not wait for PSR disable on vbl enable
drm/amd/display: Remove unnecessary eDP power down
...
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add new VID/PID 13d3/3610 for MT7922
- btusb: Add new VID/PID 13d3/3628 for MT7925
- btusb: Add MT7921e device 13d3:3576
- btusb: Add RTL8851BE device 13d3:3600
- btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
- btusb: add sysfs attribute to control USB alt setting
- qca: Expand firmware-name property
- qca: Fix poor RF performance for WCN6855
- L2CAP: handle NULL sock pointer in l2cap_sock_alloc
- Allow reset via sysfs
- ISO: Allow BIG re-sync
- dt-bindings: Utilize PMU abstraction for WCN6750
- MGMT: Mark LL Privacy as stable
* tag 'for-net-next-2025-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits)
Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync
Bluetooth: qca: Fix poor RF performance for WCN6855
Bluetooth: Allow reset via sysfs
Bluetooth: Get rid of cmd_timeout and use the reset callback
Bluetooth: Remove the cmd timeout count in btusb
Bluetooth: Use str_enable_disable-like helpers
Bluetooth: btmtk: Remove resetting mt7921 before downloading the fw
Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc
Bluetooth: btusb: Add RTL8851BE device 13d3:3600
dt-bindings: bluetooth: Utilize PMU abstraction for WCN6750
Bluetooth: btusb: Add MT7921e device 13d3:3576
Bluetooth: btrtl: check for NULL in btrtl_setup_realtek()
Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()
Bluetooth: qca: Expand firmware-name to load specific rampatch
Bluetooth: qca: Update firmware-name to support board specific nvm
dt-bindings: net: bluetooth: qca: Expand firmware-name property
Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925
Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922
Bluetooth: btusb: add sysfs attribute to control USB alt setting
Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
...
====================
Link: https://patch.msgid.link/20250117213203.3921910-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ath.git patches for v6.14
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, this time including the device
grouping infrastructure, and the advertisement of MLO support to the
wireless core. However the MLO feature is still considered to be
incomplete.
In addition, there was the usual set of bug fixes and cleanups, mostly
in ath12k, but also in ath9k.
We are now using the on-chip PMU node for power sequencing to manage the
enable/disable functionality of Bluetooth. Consequently, the inputs
previously marked as required under the Bluetooth node can be removed.
For instance, the enable GPIO is now managed by the PMU node with the
property bt-enable-gpios.
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Expand the firmware-name property to specify the names of NVM and
rampatch firmware to load. This update will support loading specific
firmware (nvm and rampatch) for certain chips, like the QCA6698
Bluetooth chip, which shares the same IP core as the WCN6855 but has
different RF components and RAM sizes, requiring new firmware files.
We might use different connectivity boards on the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.
So In firmware-name, if the NVM file has an extension, the NVM file will
be used. Otherwise, the system will first try the .bNN (board ID) file,
and if that fails, it will fall back to the .bin file.
Possible configurations:
firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21.bin";
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small IIO and interconnect and other driver fixes
to resolve reported issues. Included in here are:
- loads of iio driver fixes as a result of an audit of places where
uninitialized data would leak to userspace.
- other smaller, and normal, iio driver fixes.
- mhi driver fix
- interconnect driver fixes
- pci1xxxx driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits)
misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
interconnect: icc-clk: check return values of devm_kasprintf()
interconnect: qcom: icc-rpm: Set the count member before accessing the flex array
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
...
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-01-10
Pierre-Henry Moussay adds PIC64GX compatibility to the DT bindings for
Microchip's mpfs-can IP core.
The next 3 patches are by Sean Nyekjaer and target the tcan4x5x
driver. First the DT bindings is converted to DT schema, then nWKRQ
voltage selection is added to the driver.
Dario Binacchi's patch for the sun4i_can makes the driver more
consistent by adding a likely() to the driver.
Another patch by Sean Nyekjaer for the tcan4x5x driver gets rid of a
false error message.
Charan Pedumuru converts the atmel-can DT bindings to DT schema.
The next 2 patches are by Oliver Hartkopp. The first one maps Oliver's
former mail addresses to a dedicated CAN mail address. The second one
assigns net/sched/em_canid.c additionally to the CAN maintainers.
Ariel Otilibili's patch removes dead code from the CAN dev helper.
The next 3 patches are by Sean Nyekjaer and add HW standby support to
the tcan4x5x driver.
A patch by Dario Binacchi fixes the DT bindings for the st,stm32-bxcan
driver.
The last 4 patches are by Jimmy Assarsson and target the kvaser_usb
and the kvaser_pciefd driver: error statistics are improved and
CAN_CTRLMODE_BERR_REPORTING is added.
* tag 'linux-can-next-for-6.14-20250110' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_pciefd: Add support for CAN_CTRLMODE_BERR_REPORTING
can: kvaser_pciefd: Update stats and state even if alloc_can_err_skb() fails
can: kvaser_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
can: kvaser_usb: Update stats and state even if alloc_can_err_skb() fails
dt-bindings: can: st,stm32-bxcan: fix st,gcan property type
can: m_can: call deinit/init callback when going into suspend/resume
can: tcan4x5x: add deinit callback to set standby mode
can: m_can: add deinit callback
can: dev: can_get_state_str(): Remove dead code
MAINTAINERS: assign em_canid.c additionally to CAN maintainers
mailmap: add an entry for Oliver Hartkopp
dt-bindings: net: can: atmel: Convert to json schema
can: tcan4x5x: get rid of false clock errors
can: sun4i_can: continue to use likely() to check skb
can: tcan4x5x: add option for selecting nWKRQ voltage
dt-bindings: can: tcan4x5x: Document the ti,nwkrq-voltage-vio option
dt-bindings: can: convert tcan4x5x.txt to DT schema
dt-bindings: can: mpfs: add PIC64GX CAN compatibility
====================
Link: https://patch.msgid.link/20250110112712.3214173-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, this has the usual amdgpu/xe/i915 bits.
There is a bigger bunch of mediatek patches that I considered not
including at this stage, but all the changes (except for one were
obvious small fixes, and the rotation one is a few lines, and I
suppose will help someone have their screen up the right way), I
decided to include it since I expect it got slowed down by holidays
etc, and it's not that mainstream a hw platform.
i915:
- Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from
check_link"
amdgpu:
- Display interrupt fixes
- Fix display max surface mismatches
- Fix divide error in DM plane scale calcs
- Display divide by 0 checks in dml helpers
- SMU 13 AD/DC interrrupt handling fix
- Fix locking around buddy trim handling
amdkfd:
- Fix page fault with shader debugger enabled
- Fix eviction fence wq handling
xe:
- Avoid a NULL ptr deref when wedging
- Fix power gate sequence on DG1
mediatek:
- Revert "drm/mediatek: dsi: Correct calculation formula of PHY
Timing"
- Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind
returns err
- Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
- Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
- Add support for 180-degree rotation in the display driver
- Stop selecting foreign drivers
- Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
- Fix YCbCr422 color format issue for DP
- Fix mode valid issue for dp
- dp: Reference common DAI properties
- dsi: Add registers to pdata to fix MT8186/MT8188
- Remove unneeded semicolon
- Add return value check when reading DPCD
- Initialize pointer in mtk_drm_of_ddp_path_build_one()"
* tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe/dg1: Fix power gate sequence.
drm/xe: Fix tlb invalidation when wedging
Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
drm/amdgpu: Add a lock when accessing the buddy trim function
drm/amd/pm: fix BUG: scheduling while atomic
drm/amdkfd: wq_release signals dma_fence only when available
drm/amd/display: Add check for granularity in dml ceil/floor helpers
drm/amdkfd: fixed page fault when enable MES shader debugger
drm/amd/display: fix divide error in DM plane scale calcs
drm/amd/display: increase MAX_SURFACES to the value supported by hw
drm/amd/display: fix page fault due to max surface definition mismatch
drm/amd/display: Remove unnecessary amdgpu_irq_get/put
drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one()
drm/mediatek: Add return value check when reading DPCD
drm/mediatek: Remove unneeded semicolon
drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188
dt-bindings: display: mediatek: dp: Reference common DAI properties
drm/mediatek: Fix mode valid issue for dp
drm/mediatek: Fix YCbCr422 color format issue for DP
Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
...
Mediatek DRM Fixes - 20250104
1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing"
2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err
3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
5. Add support for 180-degree rotation in the display driver
6. Stop selecting foreign drivers
7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
8. Fix YCbCr422 color format issue for DP
9. Fix mode valid issue for dp
10. dp: Reference common DAI properties
11. dsi: Add registers to pdata to fix MT8186/MT8188
12. Remove unneeded semicolon
13. Add return value check when reading DPCD
14. Initialize pointer in mtk_drm_of_ddp_path_build_one()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104124227.45505-1-chunkuang.hu@kernel.org
The MediaTek DP hardware supports audio and exposes a DAI, so the
'#sound-dai-cells' property is needed for describing the DAI links.
Reference the dai-common.yaml schema to allow '#sound-dai-cells' to be
used, and filter out non-DP compatibles as MediaTek eDP in the same
binding doesn't support audio.
This fixes dtbs_check error:
'#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241105090207.3892242-1-fshao@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. Nothing really stands out, fortunately.
- Follow-up fixes for the new compress offload API extension
- A few ASoC SOF, AMD and Mediatek quirks and fixes
- A regression fix in legacy SH driver cleanup
- Fix DMA mapping error handling in the helper code
- Fix kselftest dependency"
* tag 'sound-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: sh: Fix wrong argument order for copy_from_iter()
selftests/alsa: Fix circular dependency involving global-timer
ALSA: memalloc: prefer dma_mapping_error() over explicit address checking
ALSA: compress_offload: improve file descriptors installation for dma-buf
ALSA: compress_offload: use safe list iteration in snd_compr_task_seq()
ALSA: compress_offload: avoid 64-bit get_user()
ALSA: compress_offload: import DMA_BUF namespace
ASoC: mediatek: disable buffer pre-allocation
ASoC: rt722: add delay time to wait for the calibration procedure
ASoC: SOF: Intel: hda-dai: Do not release the link DMA on STOP
ASoC: dt-bindings: realtek,rt5645: Fix CPVDD voltage comment
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 21QA and 21QB
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 21Q6 and 21Q7
ASoC: amd: ps: Fix for enabling DMIC on acp63 platform via _DSD entry
Convert old text based binding to json schema.
Changes during conversion:
- Add a fallback for `microchip,sam9x60-can` as it is compatible with the
CAN IP core on `atmel,at91sam9x5-can`.
- Add the required properties `clock` and `clock-names`, which were
missing in the original binding.
- Update examples and include appropriate file directives to resolve
errors identified by `dt_binding_check` and `dtbs_check`.
Signed-off-by: Charan Pedumuru <charan.pedumuru@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241120-can-v3-1-da5bb4f6128d@microchip.com
[mkl: fixed indention in example]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pull devicetree fixes from Rob Herring:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks)
platforms
- Add missing root #address-cells/#size-cells in default empty DT
- Fix uninitialized variable in of_irq_parse_one()
- Fix interrupt-map cell length check in of_irq_parse_imap_parent()
- Fix refcount handling in __of_get_dma_parent()
- Fix error path in of_parse_phandle_with_args_map()
- Fix dma-ranges handling with flags cells
- Drop explicit fw_devlink handling of 'interrupt-parent'
- Fix "compression" typo in fixed-partitions binding
- Unify "fsl,liodn" property type definitions
* tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add coreboot firmware to excluded default cells list
of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one()
of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent()
of: Fix refcount leakage for OF node returned by __of_get_dma_parent()
of: Fix error path in of_parse_phandle_with_args_map()
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
of: Add #address-cells/#size-cells in the device-tree root empty node
dt-bindings: Unify "fsl,liodn" type definitions
of: address: Preserve the flags portion on 1:1 dma-ranges mapping
of/unittest: Add empty dma-ranges address translation tests
of: property: fw_devlink: Do not use interrupt-parent directly
The DP subsystem for ZynqMP supports audio via two channels, and the DP
DMA has dma-engines for those channels. For some reason the DT binding
has not specified those channels, even if the picture included in
xlnx,zynqmp-dpsub.yaml shows "2 x aud" DMAs.
This hasn't caused any issues as the drivers have not supported audio,
and has thus gone unnoticed.
To make it possible to add the audio support to the driver, add the two
audio DMAs to the binding. While strictly speaking this is an ABI break,
there should be no regressions caused by this as we're adding new
entries at the end of the dmas list, and, after the audio support has
been added in "arm64: dts: zynqmp: Add DMA for DP audio", the driver
will treat the audio DMAs as optional to also support the old bindings.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-1-5128881457be@ideasonboard.com
The QCN9274 WiFi device supports WSI (WLAN Serial Interface). WSI is used
to exchange specific control information across radios using a doorbell
mechanism. This WSI connection is essential for exchanging control
information among these devices. The WSI interface in the QCN9274 includes
TX and RX ports, which are used to connect multiple WSI-supported devices
together, forming a WSI group.
Describe QCN9274 PCI wifi device with WSI interface.
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241211153432.775335-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Jonathan writes:
IIO: 1st set of fixes for 6.13 cycle.
The usual mixed back of fixes for ancient and recent bugs
A number of these were from an audit by Javier Carrasco of places
we may leak stack data via holes in structures passed to userspace that
were not explicitly zeroed. Very helpful effort after we found a similar
bug in review of new code.
This affected:
- dummy driver
- kionix,kmx61
- murrata,zpa2326
- rockchip,saradc
- rohm,bh1745
- veml,vcnl4035
- ti,ads1119
- ti,ads8688
- ti,tmp0006
Other fixes:
core,inkern
- Underflow fo reference count issue in error path of iio_channel_get_all()
for devices we haven't yet gotten.
tests
- Kconfig typo fix so it's possible to tell what test is being enabled.
- Check for allocation failures.
adi,ad4695
- Ensure timing requirement wrt to final clock edge vs next conversion
signal are met by adding an additional SPI transfer.
adi,ad7124
- Ensure channels are disabled at probe to avoid wrong data if channel 0
is not the first one read.
adi,ad7173
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9467
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9832
- Off by one error on input verification for phase control
adi,ad9834
- Off by one error on input verification for phase control.
atmel,at91
- In an error path don't use a variable that hasn't been initialized yet.
invensense,icm42600
- SPI burst write does not work for some icm426000 chips, disable it.
- Ensure correct handling of timestamps after resume.
st,sensors
- Add back accidentally dropped IIS2MDC compatible in binding doc.
st,stm32-dfsdm:
- label property was accidentally made a required property. Make it optional
again to fix use of older DT.
ti,ads1119
- Use a fixed size for the channel data rather than an integer, bringing
the code inline with the advertised 16 bit channel size and avoiding
userspace misinterpreting the data.
ti,ads124s08
- Use _cansleep gpio calls as no reason to prevent sleeping and it
was stopping a new board design working (trivial fix).
ti,ads1298
- Add a check on failure of devm_kasprintf()
* tag 'iio-fixes-for-6.13a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer
iio: adc: ti-ads1298: Add NULL check in ads1298_init
iio: adc: stm32-dfsdm: handle label as an optional property
iio: adc: ad4695: fix buffered read, single sample timings
...
