[ Upstream commit 150a27328b ]
Building the kernel with CONFIG_BPF_PRELOAD, and by providing a relative
path for the output directory, may fail with the following error:
$ make O=build bindeb-pkg
...
/.../linux/tools/scripts/Makefile.include:5: *** O=build does not exist. Stop.
make[7]: *** [/.../linux/kernel/bpf/preload/Makefile:9: kernel/bpf/preload/libbpf.a] Error 2
make[6]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf/preload] Error 2
make[5]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf] Error 2
make[4]: *** [/.../linux/Makefile:1799: kernel] Error 2
make[4]: *** Waiting for unfinished jobs....
In the case above, for the "bindeb-pkg" target, the error is produced by
the "dummy" check in Makefile.include, called from libbpf's Makefile.
This check changes directory to $(PWD) before checking for the existence
of $(O). But at this step we have $(PWD) pointing to "/.../linux/build",
and $(O) pointing to "build". So the Makefile.include tries in fact to
assert the existence of a directory named "/.../linux/build/build",
which does not exist.
Note that the error does not occur for all make targets and
architectures combinations. This was observed on x86 for "bindeb-pkg",
or for a regular build for UML [0].
Here are some details. The root Makefile recursively calls itself once,
after changing directory to $(O). The content for the variable $(PWD) is
preserved across recursive calls to make, so it is unchanged at this
step. For "bindeb-pkg", $(PWD) is eventually updated because the target
writes a new Makefile (as debian/rules) and calls it indirectly through
dpkg-buildpackage. This script does not preserve $(PWD), which is reset
to the current working directory when the target in debian/rules is
called.
Although not investigated, it seems likely that something similar causes
UML to change its value for $(PWD).
Non-trivial fixes could be to remove the use of $(PWD) from the "dummy"
check, or to make sure that $(PWD) and $(O) are preserved or updated to
always play well and form a valid $(PWD)/$(O) path across the different
targets and architectures. Instead, we take a simpler approach and just
update $(O) when calling libbpf's Makefile, so it points to an absolute
path which should always resolve for the "dummy" check run (through
includes) by that Makefile.
David Gow previously posted a slightly different version of this patch
as a RFC [0], two months ago or so.
[0] https://lore.kernel.org/bpf/20201119085022.3606135-1-davidgow@google.com/t/#u
Fixes: d71fa5c976 ("bpf: Add kernel module with user mode driver that populates bpffs.")
Reported-by: David Gow <davidgow@google.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/bpf/20210126161320.24561-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb8b81e396 ]
A toctou issue in `__cgroup_bpf_run_filter_getsockopt` can trigger a
WARN_ON_ONCE in a check of `copy_from_user`.
`*optlen` is checked to be non-negative in the individual getsockopt
functions beforehand. Changing `*optlen` in a race to a negative value
will result in a `copy_from_user(ctx.optval, optval, ctx.optlen)` with
`ctx.optlen` being a negative integer.
Fixes: 0d01da6afc ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Loris Reiff <loris.reiff@liblor.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20210122164232.61770-1-loris.reiff@liblor.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 640f17c824 ]
create_worker() will already set the right affinity using
kthread_bind_mask(), this means only the rescuer will need to change
it's affinity.
Howveer, while in cpu-hot-unplug a regular task is not allowed to run
on online&&!active as it would be pushed away quite agressively. We
need KTHREAD_IS_PER_CPU to survive in that environment.
Therefore set the affinity after getting that magic flag.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.826629830@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac687e6e8c ]
There is a need to distinguish geniune per-cpu kthreads from kthreads
that happen to have a single CPU affinity.
Geniune per-cpu kthreads are kthreads that are CPU affine for
correctness, these will obviously have PF_KTHREAD set, but must also
have PF_NO_SETAFFINITY set, lest userspace modify their affinity and
ruins things.
However, these two things are not sufficient, PF_NO_SETAFFINITY is
also set on other tasks that have their affinities controlled through
other means, like for instance workqueues.
Therefore another bit is needed; it turns out kthread_create_per_cpu()
already has such a bit: KTHREAD_IS_PER_CPU, which is used to make
kthread_park()/kthread_unpark() work correctly.
Expose this flag and remove the implicit setting of it from
kthread_create_on_cpu(); the io_uring usage of it seems dubious at
best.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.557620262@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 56c91a1843 upstream.
Function kernel_kexec() is called with lock system_transition_mutex
held in reboot system call. While inside kernel_kexec(), it will
acquire system_transition_mutex agin. This will lead to dead lock.
The dead lock should be easily triggered, it hasn't caused any
failure report just because the feature 'kexec jump' is almost not
used by anyone as far as I know. An inquiry can be made about who
is using 'kexec jump' and where it's used. Before that, let's simply
remove the lock operation inside CONFIG_KEXEC_JUMP ifdeffery scope.
Fixes: 55f2503c3b ("PM / reboot: Eliminate race between reboot and suspend")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pingfan Liu <kernelfans@gmail.com>
Cc: 4.19+ <stable@vger.kernel.org> # 4.19+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0e386ee0c upstream.
Before the commit 896fbe20b4 ("printk: use the lockless
ringbuffer"), msg_print_text() would only write up to size-1 bytes
into the provided buffer. Some callers expect this behavior and
append a terminator to returned string. In particular:
arch/powerpc/xmon/xmon.c:dump_log_buf()
arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout()
msg_print_text() has been replaced by record_print_text(), which
currently fills the full size of the buffer. This causes a
buffer overflow for the above callers.
Change record_print_text() so that it will only use size-1 bytes
for text data. Also, for paranoia sakes, add a terminator after
the text data.
And finally, document this behavior so that it is clear that only
size-1 bytes are used and a terminator is added.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210114170412.4819-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b1b6b5a30d ]
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34b1a1ce14 upstream
fixup_pi_state_owner() tries to ensure that the state of the rtmutex,
pi_state and the user space value related to the PI futex are consistent
before returning to user space. In case that the user space value update
faults and the fault cannot be resolved by faulting the page in via
fault_in_user_writeable() the function returns with -EFAULT and leaves
the rtmutex and pi_state owner state inconsistent.
A subsequent futex_unlock_pi() operates on the inconsistent pi_state and
releases the rtmutex despite not owning it which can corrupt the RB tree of
the rtmutex and cause a subsequent kernel stack use after free.
It was suggested to loop forever in fixup_pi_state_owner() if the fault
cannot be resolved, but that results in runaway tasks which is especially
undesired when the problem happens due to a programming error and not due
to malice.
As the user space value cannot be fixed up, the proper solution is to make
the rtmutex and the pi_state consistent so both have the same owner. This
leaves the user space value out of sync. Any subsequent operation on the
futex will fail because the 10th rule of PI futexes (pi_state owner and
user space value are consistent) has been violated.
As a consequence this removes the inept attempts of 'fixing' the situation
in case that the current task owns the rtmutex when returning with an
unresolvable fault by unlocking the rtmutex which left pi_state::owner and
rtmutex::owner out of sync in a different and only slightly less dangerous
way.
Fixes: 1b7558e457 ("futexes: fix fault handling in futex_lock_pi")
Reported-by: gzobqq@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5cade200a upstream
Updating pi_state::owner is done at several places with the same
code. Provide a function for it and use that at the obvious places.
This is also a preparation for a bug fix to avoid yet another copy of the
same code or alternatively introducing a completely unpenetratable mess of
gotos.
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04b79c5520 upstream
If that unexpected case of inconsistent arguments ever happens then the
futex state is left completely inconsistent and the printk is not really
helpful. Replace it with a warning and make the state consistent.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12bb3f7f1b upstream
In case that futex_lock_pi() was aborted by a signal or a timeout and the
task returned without acquiring the rtmutex, but is the designated owner of
the futex due to a concurrent futex_unlock_pi() fixup_owner() is invoked to
establish consistent state. In that case it invokes fixup_pi_state_owner()
which in turn tries to acquire the rtmutex again. If that succeeds then it
does not propagate this success to fixup_owner() and futex_lock_pi()
returns -EINTR or -ETIMEOUT despite having the futex locked.
Return success from fixup_pi_state_owner() in all cases where the current
task owns the rtmutex and therefore the futex and propagate it correctly
through fixup_owner(). Fixup the other callsite which does not expect a
positive return value.
Fixes: c1e2f0eaf0 ("futex: Avoid violating the 10th rule of futex")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a9c72ad4c upstream.
The verifier allows ARG_PTR_TO_BTF_ID helper arguments to be NULL, so
helper implementations need to check this before dereferencing them.
This was already fixed for the socket storage helpers but not for task
and inode.
The issue can be reproduced by attaching an LSM program to
inode_rename hook (called when moving files) which tries to get the
inode of the new file without checking for its nullness and then trying
to move an existing file to a new path:
mv existing_file new_file_does_not_exist
The report including the sample program and the steps for reproducing
the bug:
https://lore.kernel.org/bpf/CANaYP3HWkH91SN=wTNO9FL_2ztHfqcXKX38SSE-JJ2voh+vssw@mail.gmail.com
Fixes: 4cf1bc1f10 ("bpf: Implement task local storage")
Fixes: 8ea636848a ("bpf: Implement bpf_local_storage for inodes")
Reported-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075525.256820-3-kpsingh@kernel.org
[ just take 1/2 of this patch for 5.10.y - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 668af87f99 ]
Counting text lines in a record simply involves counting the number
of newline characters (+1). However, it is searching the full data
block for newline characters, even though the text data can be (and
often is) a subset of that area. Since the extra area in the data
block was never initialized, the result is that extra newlines may
be seen and counted.
Restrict newline searching to the text data length.
Fixes: b6cf8b3f33 ("printk: add lockless ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210113144234.6545-1-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5541075a34 ]
The bpf_tracing_prog_attach error path calls bpf_prog_put
on prog, which causes refcount underflow when it's called
from link_create function.
link_create
prog = bpf_prog_get <-- get
...
tracing_bpf_link_attach(prog..
bpf_tracing_prog_attach(prog..
out_put_prog:
bpf_prog_put(prog); <-- put
if (ret < 0)
bpf_prog_put(prog); <-- put
Removing bpf_prog_put call from bpf_tracing_prog_attach
and making sure its callers call it instead.
Fixes: 4a1e7c0c63 ("bpf: Support attaching freplace programs to multiple attach points")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210111191650.1241578-1-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bc895e8b2a upstream.
Fix incorrect signed_{sub,add32}_overflows() input types (and a related buggy
comment). It looks like this might have slipped in via copy/paste issue, also
given prior to 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
the signature of signed_sub_overflows() had s64 a and s64 b as its input args
whereas now they are truncated to s32. Thus restore proper types. Also, the case
of signed_add32_overflows() is not consistent to signed_sub32_overflows(). Both
have s32 as inputs, therefore align the former.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: De4dCr0w <sa516203@mail.ustc.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1b04fa9900 ]
PowerPC testing encountered boot failures due to RCU Tasks not being
fully initialized until core_initcall() time. This commit therefore
initializes RCU Tasks (along with Rude RCU and RCU Tasks Trace) just
before early_initcall() time, thus allowing waiting on RCU Tasks grace
periods from early_initcall() handlers.
Link: https://lore.kernel.org/rcu/87eekfh80a.fsf@dja-thinkpad.axtens.net/
Fixes: 36dadef23f ("kprobes: Init kprobes in early_initcall")
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01341fbd0d ]
In realtime scenario, We do not want to have interference on the
isolated cpu cores. but when invoking alloc_workqueue() for percpu wq
on the housekeeping cpu, it kick a kworker on the isolated cpu.
alloc_workqueue
pwq_adjust_max_active
wake_up_worker
The comment in pwq_adjust_max_active() said:
"Need to kick a worker after thawed or an unbound wq's
max_active is bumped"
So it is unnecessary to kick a kworker for percpu's wq when invoking
alloc_workqueue(). this patch only kick a worker based on the actual
activation of delayed works.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31784cff7e ]
In preparation for converting exec_update_mutex to a rwsem so that
multiple readers can execute in parallel and not deadlock, add
down_read_interruptible. This is needed for perf_event_open to be
converted (with no semantic changes) from working on a mutex to
wroking on a rwsem.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/87k0tybqfy.fsf@x220.int.ebiederm.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f9368b5bf ]
In preparation for converting exec_update_mutex to a rwsem so that
multiple readers can execute in parallel and not deadlock, add
down_read_killable_nested. This is needed so that kcmp_lock
can be converted from working on a mutexes to working on rw_semaphores.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/87o8jabqh3.fsf@x220.int.ebiederm.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78af4dc949 ]
Syzbot reported a lock inversion involving perf. The sore point being
perf holding exec_update_mutex() for a very long time, specifically
across a whole bunch of filesystem ops in pmu::event_init() (uprobes)
and anon_inode_getfile().
This then inverts against procfs code trying to take
exec_update_mutex.
Move the permission checks later, such that we need to hold the mutex
over less code.
Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba8ea8e7dd ]
can_stop_idle_tick() checks whether the do_timer() duty has been taken over
by a CPU on boot. That's silly because the boot CPU always takes over with
the initial clockevent device.
But even if no CPU would have installed a clockevent and taken over the
duty then the question whether the tick on the current CPU can be stopped
or not is moot. In that case the current CPU would have no clockevent
either, so there would be nothing to keep ticking.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20201206212002.725238293@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38dc717e97 ]
Apparently there has been a longstanding race between udev/systemd and
the module loader. Currently, the module loader sends a uevent right
after sysfs initialization, but before the module calls its init
function. However, some udev rules expect that the module has
initialized already upon receiving the uevent.
This race has been triggered recently (see link in references) in some
systemd mount unit files. For instance, the configfs module creates the
/sys/kernel/config mount point in its init function, however the module
loader issues the uevent before this happens. sys-kernel-config.mount
expects to be able to mount /sys/kernel/config upon receipt of the
module loading uevent, but if the configfs module has not called its
init function yet, then this directory will not exist and the mount unit
fails. A similar situation exists for sys-fs-fuse-connections.mount, as
the fuse sysfs mount point is created during the fuse module's init
function. If udev is faster than module initialization then the mount
unit would fail in a similar fashion.
To fix this race, delay the module KOBJ_ADD uevent until after the
module has finished calling its init routine.
References: https://github.com/systemd/systemd/issues/17586
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-By: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e8ed280da ]
If a module fails to load due to an error in prepare_coming_module(),
the following error handling in load_module() runs with
MODULE_STATE_COMING in module's state. Fix it by correctly setting
MODULE_STATE_GOING under "bug_cleanup" label.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit adab66b71a upstream.
It was believed that metag was the only architecture that required the ring
buffer to keep 8 byte words aligned on 8 byte architectures, and with its
removal, it was assumed that the ring buffer code did not need to handle
this case. It appears that sparc64 also requires this.
The following was reported on a sparc64 boot up:
kernel: futex hash table entries: 65536 (order: 9, 4194304 bytes, linear)
kernel: Running postponed tracer tests:
kernel: Testing tracer function:
kernel: Kernel unaligned access at TPC[552a20] trace_function+0x40/0x140
kernel: Kernel unaligned access at TPC[552a24] trace_function+0x44/0x140
kernel: Kernel unaligned access at TPC[552a20] trace_function+0x40/0x140
kernel: Kernel unaligned access at TPC[552a24] trace_function+0x44/0x140
kernel: Kernel unaligned access at TPC[552a20] trace_function+0x40/0x140
kernel: PASSED
Need to put back the 64BIT aligned code for the ring buffer.
Link: https://lore.kernel.org/r/CADxRZqzXQRYgKc=y-KV=S_yHL+Y8Ay2mh5ezeZUnpRvg+syWKw@mail.gmail.com
Cc: stable@vger.kernel.org
Fixes: 86b3de60a0 ("ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS")
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 950cc0d2be upstream.
The handle_inode_event() interface was added as (quoting comment):
"a simple variant of handle_event() for groups that only have inode
marks and don't have ignore mask".
In other words, all backends except fanotify. The inotify backend
also falls under this category, but because it required extra arguments
it was left out of the initial pass of backends conversion to the
simple interface.
This results in code duplication between the generic helper
fsnotify_handle_event() and the inotify_handle_event() callback
which also happen to be buggy code.
Generalize the handle_inode_event() arguments and add the check for
FS_EXCL_UNLINK flag to the generic helper, so inotify backend could
be converted to use the simple interface.
Link: https://lore.kernel.org/r/20201202120713.702387-2-amir73il@gmail.com
CC: stable@vger.kernel.org
Fixes: b9a1b97725 ("fsnotify: create method handle_inode_event() in fsnotify_operations")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 406100f3da upstream.
One of our machines keeled over trying to rebuild the scheduler domains.
Mainline produces the same splat:
BUG: unable to handle page fault for address: 0000607f820054db
CPU: 2 PID: 149 Comm: kworker/1:1 Not tainted 5.10.0-rc1-master+ #6
Workqueue: events cpuset_hotplug_workfn
RIP: build_sched_domains
Call Trace:
partition_sched_domains_locked
rebuild_sched_domains_locked
cpuset_hotplug_workfn
It happens with cgroup2 and exclusive cpusets only. This reproducer
triggers it on an 8-cpu vm and works most effectively with no
preexisting child cgroups:
cd $UNIFIED_ROOT
mkdir cg1
echo 4-7 > cg1/cpuset.cpus
echo root > cg1/cpuset.cpus.partition
# with smt/control reading 'on',
echo off > /sys/devices/system/cpu/smt/control
RIP maps to
sd->shared = *per_cpu_ptr(sdd->sds, sd_id);
from sd_init(). sd_id is calculated earlier in the same function:
cpumask_and(sched_domain_span(sd), cpu_map, tl->mask(cpu));
sd_id = cpumask_first(sched_domain_span(sd));
tl->mask(cpu), which reads cpu_sibling_map on x86, returns an empty mask
and so cpumask_first() returns >= nr_cpu_ids, which leads to the bogus
value from per_cpu_ptr() above.
The problem is a race between cpuset_hotplug_workfn() and a later
offline of CPU N. cpuset_hotplug_workfn() updates the effective masks
when N is still online, the offline clears N from cpu_sibling_map, and
then the worker uses the stale effective masks that still have N to
generate the scheduling domains, leading the worker to read
N's empty cpu_sibling_map in sd_init().
rebuild_sched_domains_locked() prevented the race during the cgroup2
cpuset series up until the Fixes commit changed its check. Make the
check more robust so that it can detect an offline CPU in any exclusive
cpuset's effective mask, not just the top one.
Fixes: 0ccea8feb9 ("cpuset: Make generate_sched_domains() work with partition")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20201112171711.639541-1-daniel.m.jordan@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 57efa1fe59 ]
Since commit 70e806e4e6 ("mm: Do early cow for pinned pages during
fork() for ptes") pages under a FOLL_PIN will not be write protected
during COW for fork. This means that pages returned from
pin_user_pages(FOLL_WRITE) should not become write protected while the pin
is active.
However, there is a small race where get_user_pages_fast(FOLL_PIN) can
establish a FOLL_PIN at the same time copy_present_page() is write
protecting it:
CPU 0 CPU 1
get_user_pages_fast()
internal_get_user_pages_fast()
copy_page_range()
pte_alloc_map_lock()
copy_present_page()
atomic_read(has_pinned) == 0
page_maybe_dma_pinned() == false
atomic_set(has_pinned, 1);
gup_pgd_range()
gup_pte_range()
pte_t pte = gup_get_pte(ptep)
pte_access_permitted(pte)
try_grab_compound_head()
pte = pte_wrprotect(pte)
set_pte_at();
pte_unmap_unlock()
// GUP now returns with a write protected page
The first attempt to resolve this by using the write protect caused
problems (and was missing a barrrier), see commit f3c64eda3e ("mm: avoid
early COW write protect games during fork()")
Instead wrap copy_p4d_range() with the write side of a seqcount and check
the read side around gup_pgd_range(). If there is a collision then
get_user_pages_fast() fails and falls back to slow GUP.
Slow GUP is safe against this race because copy_page_range() is only
called while holding the exclusive side of the mmap_lock on the src
mm_struct.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lore.kernel.org/r/CAHk-=wi=iCnYCARbPGjkVJu9eyYeZ13N64tZYLdOB8CP5Q_PLw@mail.gmail.com
Link: https://lkml.kernel.org/r/2-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Fixes: f3c64eda3e ("mm: avoid early COW write protect games during fork()")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: "Ahmed S. Darwish" <a.darwish@linutronix.de> [seqcount_t parts]
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4615fbc378 ]
When an interrupt allocation fails for N interrupts, it is pretty
common for the error handling code to free the same number of interrupts,
no matter how many interrupts have actually been allocated.
This may result in the domain freeing code to be unexpectedly called
for interrupts that have no mapping in that domain. Things end pretty
badly.
Instead, add some checks to irq_domain_free_irqs_hierarchy() to make sure
that thiss does not follow the hierarchy if no mapping exists for a given
interrupt.
Fixes: 6a6544e520 ("genirq/irqdomain: Remove auto-recursive hierarchy support")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201129135551.396777-1-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56292e8609 ]
The current memmory-allocation interface causes the following difficulties
for kvfree_rcu():
a) If built with CONFIG_PROVE_RAW_LOCK_NESTING, the lockdep will
complain about violation of the nesting rules, as in "BUG: Invalid
wait context". This Kconfig option checks for proper raw_spinlock
vs. spinlock nesting, in particular, it is not legal to acquire a
spinlock_t while holding a raw_spinlock_t.
This is a problem because kfree_rcu() uses raw_spinlock_t whereas the
"page allocator" internally deals with spinlock_t to access to its
zones. The code also can be broken from higher level of view:
<snip>
raw_spin_lock(&some_lock);
kfree_rcu(some_pointer, some_field_offset);
<snip>
b) If built with CONFIG_PREEMPT_RT, spinlock_t is converted into
sleeplock. This means that invoking the page allocator from atomic
contexts results in "BUG: scheduling while atomic".
c) Please note that call_rcu() is already invoked from raw atomic context,
so it is only reasonable to expaect that kfree_rcu() and kvfree_rcu()
will also be called from atomic raw context.
This commit therefore defers page allocation to a clean context using the
combination of an hrtimer and a workqueue. The hrtimer stage is required
in order to avoid deadlocks with the scheduler. This deferred allocation
is required only when kvfree_rcu()'s per-CPU page cache is empty.
Link: https://lore.kernel.org/lkml/20200630164543.4mdcf6zb4zfclhln@linutronix.de/
Fixes: 3042f83f19 ("rcu: Support reclaim for head-less object")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2098b4440 ]
Kim reported that perf-ftrace made his box unhappy. It turns out that
commit:
ff5c4f5cad ("rcu/tree: Mark the idle relevant functions noinstr")
removed one too many notrace qualifiers, probably due to there not being
a helpful comment.
This commit therefore reinstates the notrace and adds a comment to avoid
losing it again.
[ paulmck: Apply Steven Rostedt's feedback on the comment. ]
Fixes: ff5c4f5cad ("rcu/tree: Mark the idle relevant functions noinstr")
Reported-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
