This patch is for linux-6.3.y only, it has no direct mainline
equivalent.
LLVM 17 will now use the GOT for extern weak symbols when using the
medany model, which causes a linker orphan section warning on
linux-6.3.y:
ld.lld: warning: <internal>:(.got) is being placed in '.got'
This is not an issue in mainline because handling of the .got section
was added by commit 39b3307294 ("riscv: Introduce CONFIG_RELOCATABLE")
and further extended by commit 26e7aacb83 ("riscv: Allow to downgrade
paging mode from the command line") in 6.4-rc1. Neither of these changes
are suitable for stable, so add explicit handling of the .got section in
a standalone change to align 6.3 and mainline, which addresses the
warning.
This is only an issue for 6.3 because commit f4b71bff8d ("riscv:
select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL") landed in 6.3-rc1, so
earlier releases will not see this warning because it will not be
enabled.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1865
Link: a178ba9fbd
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
riscv establishes 2 virtual mappings:
- early_pg_dir maps the kernel which allows to discover the system
memory
- swapper_pg_dir installs the final mapping (linear mapping included)
We used to map the dtb in early_pg_dir using DTB_EARLY_BASE_VA, and this
mapping was not carried over in swapper_pg_dir. It happens that
early_init_fdt_scan_reserved_mem() must be called before swapper_pg_dir is
setup otherwise we could allocate reserved memory defined in the dtb.
And this function initializes reserved_mem variable with addresses that
lie in the early_pg_dir dtb mapping: when those addresses are reused
with swapper_pg_dir, this mapping does not exist and then we trap.
The previous "fix" was incorrect as early_init_fdt_scan_reserved_mem()
must be called before swapper_pg_dir is set up otherwise we could
allocate in reserved memory defined in the dtb.
So move the dtb mapping in the fixmap region which is established in
early_pg_dir and handed over to swapper_pg_dir.
Fixes: 922b0375fc ("riscv: Fix memblock reservation for device tree blob")
Fixes: 8f3a2b4a96 ("RISC-V: Move DT mapping outof fixmap")
Fixes: 50e63dd8ed ("riscv: fix reserved memory setup")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-2-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We're currently using stop_machine() to update ftrace & kprobes, which
means that the thread that takes text_mutex during may not be the same
as the thread that eventually patches the code. This isn't actually a
race because the lock is still held (preventing any other concurrent
accesses) and there is only one thread running during stop_machine(),
but it does trigger a lockdep failure.
This patch just elides the lockdep check during stop_machine.
Fixes: c15ac4fd60 ("riscv/ftrace: Add dynamic function tracer support")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230303143754.4005217-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull RISC-V updates from Palmer Dabbelt:
"There's a bunch of fixes/cleanups throughout the tree as usual, but we
also have a handful of new features:
- Various improvements to the extension detection and alternative
patching infrastructure
- Zbb-optimized string routines
- Support for cpu-capacity in the RISC-V DT bindings
- Zicbom no longer depends on toolchain support
- Some performance and code size improvements to ftrace
- Support for ARCH_WANT_LD_ORPHAN_WARN
- Oops now contain the faulting instruction"
* tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (67 commits)
RISC-V: add a spin_shadow_stack declaration
riscv: mm: hugetlb: Enable ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
riscv: Add header include guards to insn.h
riscv: alternative: proceed one more instruction for auipc/jalr pair
riscv: Avoid enabling interrupts in die()
riscv, mm: Perform BPF exhandler fixup on page fault
RISC-V: take text_mutex during alternative patching
riscv: hwcap: Don't alphabetize ISA extension IDs
RISC-V: fix ordering of Zbb extension
riscv: jump_label: Fixup unaligned arch_static_branch function
RISC-V: Only provide the single-letter extensions in HWCAP
riscv: mm: fix regression due to update_mmu_cache change
scripts/decodecode: Add support for RISC-V
riscv: Add instruction dump to RISC-V splats
riscv: select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL
riscv: vmlinux.lds.S: explicitly catch .init.bss sections from EFI stub
riscv: vmlinux.lds.S: explicitly catch .riscv.attributes sections
riscv: vmlinux.lds.S: explicitly catch .rela.dyn symbols
riscv: lds: define RUNTIME_DISCARD_EXIT
RISC-V: move some stray __RISCV_INSN_FUNCS definitions from kprobes
...
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
Pull EFI updates from Ard Biesheuvel:
"A healthy mix of EFI contributions this time:
- Performance tweaks for efifb earlycon (Andy)
- Preparatory refactoring and cleanup work in the efivar layer, which
is needed to accommodate the Snapdragon arm64 laptops that expose
their EFI variable store via a TEE secure world API (Johan)
- Enhancements to the EFI memory map handling so that Xen dom0 can
safely access EFI configuration tables (Demi Marie)
- Wire up the newly introduced IBT/BTI flag in the EFI memory
attributes table, so that firmware that is generated with ENDBR/BTI
landing pads will be mapped with enforcement enabled
- Clean up how we check and print the EFI revision exposed by the
firmware
- Incorporate EFI memory attributes protocol definition and wire it
up in the EFI zboot code (Evgeniy)
This ensures that these images can execute under new and stricter
rules regarding the default memory permissions for EFI page
allocations (More work is in progress here)
- CPER header cleanup (Dan Williams)
- Use a raw spinlock to protect the EFI runtime services stack on
arm64 to ensure the correct semantics under -rt (Pierre)
- EFI framebuffer quirk for Lenovo Ideapad (Darrell)"
* tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
arm64: efi: Make efi_rt_lock a raw_spinlock
efi: Add mixed-mode thunk recipe for GetMemoryAttributes
efi: x86: Wire up IBT annotation in memory attributes table
efi: arm64: Wire up BTI annotation in memory attributes table
efi: Discover BTI support in runtime services regions
efi/cper, cxl: Remove cxl_err.h
efi: Use standard format for printing the EFI revision
efi: Drop minimum EFI version check at boot
efi: zboot: Use EFI protocol to remap code/data with the right attributes
efi/libstub: Add memory attribute protocol definitions
efi: efivars: prevent double registration
efi: verify that variable services are supported
efivarfs: always register filesystem
efi: efivars: add efivars printk prefix
efi: Warn if trying to reserve memory under Xen
efi: Actually enable the ESRT under Xen
efi: Apply allowlist to EFI configuration tables when running under Xen
efi: xen: Implement memory descriptor lookup based on hypercall
efi: memmap: Disregard bogus entries instead of returning them
...
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Jisheng Zhang <jszhang@kernel.org> says:
This series tries to improve link time handling of riscv:
patch1 adds the missing RUNTIME_DISCARD_EXIT as suggested by Masahiro.
Similar as other architectures such as x86, arm64 and so on, enable
ARCH_WANT_LD_ORPHAN_WARN to enable linker orphan warnings to prevent
from missing any new sections in future. So the following two patches
are preparation ones, and the last patch finally selects
ARCH_WANT_LD_ORPHAN_WARN
* b4-shazam-merge:
riscv: select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL
riscv: vmlinux.lds.S: explicitly catch .init.bss sections from EFI stub
riscv: vmlinux.lds.S: explicitly catch .riscv.attributes sections
riscv: vmlinux.lds.S: explicitly catch .rela.dyn symbols
riscv: lds: define RUNTIME_DISCARD_EXIT
Link: https://lore.kernel.org/r/20230119155417.2600-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
While working on something else, I noticed that the kernel would start
accepting interrupts again after crashing in an interrupt handler. Since
the kernel is already in inconsistent state, enabling interrupts is
dangerous and opens up risk of kernel state deteriorating further.
Interrupts do get enabled via what looks like an unintended side effect of
spin_unlock_irq, so switch to the more cautious
spin_lock_irqsave/spin_unlock_irqrestore instead.
Fixes: 76d2a0493a ("RISC-V: Init and Halt Code")
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230215144828.3370316-1-mnissler@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When enabling linker orphan section warning, I got warnings similar as
below:
ld.lld: warning:
./drivers/firmware/efi/libstub/lib.a(efi-stub-helper.stub.o):(.init.bss)
is being placed in '.init.bss'
Catch the sections so that we can enable linker orphan section warning.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230119155417.2600-5-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When enabling linker orphan section warning, I got warnings similar as
below:
riscv64-linux-gnu-ld: warning: orphan section `.riscv.attributes' from
`init/main.o' being placed in section `.riscv.attributes'
While I don't see any usage of .riscv.attributes sections' in kernel
now, just catch the sections so that we can enable linker orphan
section warning.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230119155417.2600-4-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When enabling linker orphan section warning, I got warnings similar as
below:
riscv64-linux-gnu-ld: warning: orphan section `.rela.text' from
`init/main.o' being placed in section `.rela.dyn'
Use the approach similar as ARM64 does and declare it in vmlinux.lds.S
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230119155417.2600-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
riscv discards .exit.* sections at run-time but doesn't define
RUNTIME_DISCARD_EXIT. However, the .exit.* sections are still allocated
and kept even if the generic DISCARDS would discard the sections due
to missing RUNTIME_DISCARD_EXIT, because the DISCARD sits at the end of
the linker script. Add the missing RUNTIME_DISCARD_EXIT define so that
it still works if we move DISCARD up or even at the beginning of the
linker script.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230119155417.2600-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and clockevent/source drivers:
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be
directed to the no restart function instead of doing a partial
setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a
user space bug, preventing this is a correctness issue and caters
to the least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and
RISC-V variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place"
* tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ
clocksource/drivers/em_sti: Mark driver as non-removable
clocksource/drivers/sh_tmu: Mark driver as non-removable
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
clocksource/drivers/timer-microchip-pit64b: Add delay timer
clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM
dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx
dt-bindings: timer: mediatek,mtk-timer: add MT8365
clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback
clocksource/drivers/sh_cmt: Mark driver as non-removable
clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST
clocksource/drivers/riscv: Increase the clock source rating
clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
dt-bindings: timer: Add bindings for the RISC-V timer device
RISC-V: time: initialize hrtimer based broadcast clock event device
dt-bindings: timer: rk-timer: Add rktimer for rv1126
time/debug: Fix memory leak with using debugfs_lookup()
clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime()
clocksource: Verify HPET and PMTMR when TSC unverified
...
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-17
We've added 64 non-merge commits during the last 7 day(s) which contain
a total of 158 files changed, 4190 insertions(+), 988 deletions(-).
The main changes are:
1) Add a rbtree data structure following the "next-gen data structure"
precedent set by recently-added linked-list, that is, by using
kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky.
2) Add a new benchmark for hashmap lookups to BPF selftests,
from Anton Protopopov.
3) Fix bpf_fib_lookup to only return valid neighbors and add an option
to skip the neigh table lookup, from Martin KaFai Lau.
4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory
accouting for container environments, from Yafang Shao.
5) Batch of ice multi-buffer and driver performance fixes,
from Alexander Lobakin.
6) Fix a bug in determining whether global subprog's argument is
PTR_TO_CTX, which is based on type names which breaks kprobe progs,
from Andrii Nakryiko.
7) Prep work for future -mcpu=v4 LLVM option which includes usage of
BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier,
from Eduard Zingerman.
8) More prep work for later building selftests with Memory Sanitizer
in order to detect usages of undefined memory, from Ilya Leoshkevich.
9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer
dereference via sendmsg(), from Maciej Fijalkowski.
10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui.
11) Fix BPF memory allocator in combination with BPF hashtab where it could
corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao.
12) Fix LoongArch BPF JIT to always use 4 instructions for function
address so that instruction sequences don't change between passes,
from Hengqi Chen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
selftests/bpf: Add bpf_fib_lookup test
bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup
riscv, bpf: Add bpf trampoline support for RV64
riscv, bpf: Add bpf_arch_text_poke support for RV64
riscv, bpf: Factor out emit_call for kernel and bpf context
riscv: Extend patch_text for multiple instructions
Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"
selftests/bpf: Add global subprog context passing tests
selftests/bpf: Convert test_global_funcs test to test_loader framework
bpf: Fix global subprog context argument resolution logic
LoongArch, bpf: Use 4 instructions for function address in JIT
bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state
bpf: Disable bh in bpf_test_run for xdp and tc prog
xsk: check IFF_UP earlier in Tx path
Fix typos in selftest/bpf files
selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd()
...
====================
Link: https://lore.kernel.org/r/20230217221737.31122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The __RISCV_INSN_FUNCS originally declared riscv_insn_is_* functions inside
the kprobes implementation. This got moved into a central header in
commit ec5f908775 ("RISC-V: Move riscv_insn_is_* macros into a common header").
Though it looks like I overlooked two of them, so fix that. FENCE itself is
an instruction defined directly by its own opcode, while the created
riscv_isn_is_system function covers all instructions defined under the SYSTEM
opcode.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230113211955.3534431-1-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
guoren@kernel.org <guoren@kernel.org> says:
From: Guo Ren <guoren@linux.alibaba.com>
The previous ftrace detour implementation fc76b8b8011 ("riscv: Using
PATCHABLE_FUNCTION_ENTRY instead of MCOUNT") contain three problems.
- The most horrible bug is preemption panic which found by Andy [1].
Let's disable preemption for ftrace first, and Andy could continue
the ftrace preemption work.
- The "-fpatchable-function-entry= CFLAG" wasted code size
!RISCV_ISA_C.
- The ftrace detour implementation wasted code size.
- When livepatching, the trampoline (ftrace_regs_caller) would not
return to <func_prolog+12> but would rather jump to the new function.
So, "REG_L ra, -SZREG(sp)" would not run and the original return
address would not be restored. The kernel is likely to hang or crash
as a result. (Found by Evgenii Shatokhin [4])
[Palmer: The first three patches in this series are pretty concrete
fixes, so I'm pulling them ahead of the rest of the series.]
* b4-shazam-merge:
riscv: ftrace: Reduce the detour code size to half
riscv: ftrace: Remove wasted nops for !RISCV_ISA_C
riscv: ftrace: Fixup panic by disabling preemption
Link: https://lore.kernel.org/r/20230112090603.1295340-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use a temporary register to reduce the size of detour code from 16 bytes to
8 bytes. The previous implementation is from 'commit afc76b8b80 ("riscv:
Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")'.
Before the patch:
<func_prolog>:
0: REG_S ra, -SZREG(sp)
4: auipc ra, ?
8: jalr ?(ra)
12: REG_L ra, -SZREG(sp)
(func_boddy)
After the patch:
<func_prolog>:
0: auipc t0, ?
4: jalr t0, ?(t0)
(func_boddy)
This patch not just reduces the size of detour code, but also fixes an
important issue:
An Ftrace callback registered with FTRACE_OPS_FL_IPMODIFY flag can
actually change the instruction pointer, e.g. to "replace" the given
kernel function with a new one, which is needed for livepatching, etc.
In this case, the trampoline (ftrace_regs_caller) would not return to
<func_prolog+12> but would rather jump to the new function. So, "REG_L
ra, -SZREG(sp)" would not run and the original return address would not
be restored. The kernel is likely to hang or crash as a result.
This can be easily demonstrated if one tries to "replace", say,
cmdline_proc_show() with a new function with the same signature using
instruction_pointer_set(&fregs->regs, new_func_addr) in the Ftrace
callback.
Link: https://lore.kernel.org/linux-riscv/20221122075440.1165172-1-suagrfillet@gmail.com/
Link: https://lore.kernel.org/linux-riscv/d7d5730b-ebef-68e5-5046-e763e1ee6164@yadro.com/
Co-developed-by: Song Shuai <suagrfillet@gmail.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Evgenii Shatokhin <e.shatokhin@yadro.com>
Reviewed-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/r/20230112090603.1295340-4-guoren@kernel.org
Cc: stable@vger.kernel.org
Fixes: 10626c32e3 ("riscv/ftrace: Add basic support")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
Ever since RISC-V starting using generic arch topology code, the code
paths for cpu-capacity have been there but there's no binding defined to
actually convey the information. Defining the same property as used on
arm seems to be the only logical thing to do, so do it.
[Palmer: This is on top of the fix required to make it work, which
itself wasn't merged until late in the 6.2 cycle and thus pulls in
various other fixes.]
* b4-shazam-merge:
dt-bindings: riscv: add a capacity-dmips-mhz cpu property
dt-bindings: arm: move cpu-capacity to a shared loation
riscv: Move call to init_cpu_topology() to later initialization stage
riscv/kprobe: Fix instruction simulation of JALR
riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT
MAINTAINERS: add an IRC entry for RISC-V
RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2
dt-bindings: riscv: fix single letter canonical order
dt-bindings: riscv: fix underscore requirement for multi-letter extensions
riscv: uaccess: fix type of 0 variable on error in get_user()
riscv, kprobes: Stricter c.jr/c.jalr decoding
Link: https://lore.kernel.org/r/20230104180513.1379453-1-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Having a clocksource_arch_init() callback always sets vdso_clock_mode to
VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
required for the riscv-timer.
This works for platforms where just riscv-timer clocksource is present.
On platforms where other clock sources are available we want them to
register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.
On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
move setting of vdso_clock_mode in the riscv-timer driver instead of doing
this in clocksource_arch_init() callback as done similarly for ARM/64
architecture.
[0] drivers/clocksource/renesas-ostm.c
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221229224601.103851-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Similarly to commit 022eb8ae8b ("ARM: 8938/1: kernel: initialize
broadcast hrtimer based clock event device"), RISC-V needs to initiate
hrtimer based broadcast clock event device before C3STOP can be used.
Otherwise, the introduction of C3STOP for the RISC-V arch timer in
commit 232ccac1bd ("clocksource/drivers/riscv: Events are stopped
during CPU suspend") leaves us without any broadcast timer registered.
This prevents the kernel from entering oneshot mode, which breaks timer
behaviour, for example clock_nanosleep().
A test app that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250
& C3STOP enabled, the sleep times are rounded up to the next jiffy:
== CPU: 1 == == CPU: 2 == == CPU: 3 == == CPU: 4 ==
Mean: 7.974992 Mean: 7.976534 Mean: 7.962591 Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000 Hi: 10.495000 Hi: 8.864000 Hi: 4.736000
Lo: 6.087000 Lo: 6.380000 Lo: 4.872000 Lo: 3.403000
Samples: 521 Samples: 521 Samples: 521 Samples: 521
Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Fixes: 232ccac1bd ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Suggested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-2-apatel@ventanamicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Add the generic plumbing to detect whether or not the runtime code
regions were constructed with BTI/IBT landing pads by the firmware,
permitting the OS to enable enforcement when mapping these regions into
the OS's address space.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
When running kfence_test, I found some testcases failed like this:
# test_out_of_bounds_read: EXPECTATION FAILED at mm/kfence/kfence_test.c:346
Expected report_matches(&expect) to be true, but is false
not ok 1 - test_out_of_bounds_read
The corresponding call-trace is:
BUG: KFENCE: out-of-bounds read in kunit_try_run_case+0x38/0x84
Out-of-bounds read at 0x(____ptrval____) (32B right of kfence-#10):
kunit_try_run_case+0x38/0x84
kunit_generic_run_threadfn_adapter+0x12/0x1e
kthread+0xc8/0xde
ret_from_exception+0x0/0xc
The kfence_test using the first frame of call trace to check whether the
testcase is succeed or not. Commit 6a00ef4493 ("riscv: eliminate
unreliable __builtin_frame_address(1)") skip first frame for all
case, which results the kfence_test failed. Indeed, we only need to skip
the first frame for case (task==NULL || task==current).
With this patch, the call-trace will be:
BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0x88/0x19e
Out-of-bounds read at 0x(____ptrval____) (1B left of kfence-#7):
test_out_of_bounds_read+0x88/0x19e
kunit_try_run_case+0x38/0x84
kunit_generic_run_threadfn_adapter+0x12/0x1e
kthread+0xc8/0xde
ret_from_exception+0x0/0xc
Fixes: 6a00ef4493 ("riscv: eliminate unreliable __builtin_frame_address(1)")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221207025038.1022045-1-liushixin2@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The kernel would panic when probed for an illegal position. eg:
(CONFIG_RISCV_ISA_C=n)
echo 'p:hello kernel_clone+0x16 a0=%a0' >> kprobe_events
echo 1 > events/kprobes/hello/enable
cat trace
Kernel panic - not syncing: stack-protector: Kernel stack
is corrupted in: __do_sys_newfstatat+0xb8/0xb8
CPU: 0 PID: 111 Comm: sh Not tainted
6.2.0-rc1-00027-g2d398fe49a4d #490
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80007268>] dump_backtrace+0x38/0x48
[<ffffffff80c5e83c>] show_stack+0x50/0x68
[<ffffffff80c6da28>] dump_stack_lvl+0x60/0x84
[<ffffffff80c6da6c>] dump_stack+0x20/0x30
[<ffffffff80c5ecf4>] panic+0x160/0x374
[<ffffffff80c6db94>] generic_handle_arch_irq+0x0/0xa8
[<ffffffff802deeb0>] sys_newstat+0x0/0x30
[<ffffffff800158c0>] sys_clone+0x20/0x30
[<ffffffff800039e8>] ret_from_syscall+0x0/0x4
---[ end Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: __do_sys_newfstatat+0xb8/0xb8 ]---
That is because the kprobe's ebreak instruction broke the kernel's
original code. The user should guarantee the correction of the probe
position, but it couldn't make the kernel panic.
This patch adds arch_check_kprobe in arch_prepare_kprobe to prevent an
illegal position (Such as the middle of an instruction).
Fixes: c22b0bcb1d ("riscv: Add kprobes supported")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230201040604.3390509-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jisheng Zhang <jszhang@kernel.org> says:
Generally, riscv ISA extensions are fixed for any specific hardware
platform, so a hart's features won't change after booting, this
chacteristic makes it straightforward to use a static branch to check
a specific ISA extension is supported or not to optimize performance.
However, some ISA extensions such as SVPBMT and ZICBOM are handled
via. the alternative sequences.
Basically, for ease of maintenance, we prefer to use static branches
in C code, but recently, Samuel found that the static branch usage in
cpu_relax() breaks building with CONFIG_CC_OPTIMIZE_FOR_SIZE[1]. As
Samuel pointed out, "Having a static branch in cpu_relax() is
problematic because that function is widely inlined, including in some
quite complex functions like in the VDSO. A quick measurement shows
this static branch is responsible by itself for around 40% of the jump
table."
Samuel's findings pointed out one of a few downsides of static branches
usage in C code to handle ISA extensions detected at boot time:
static branch's metadata in the __jump_table section, which is not
discarded after ISA extensions are finalized, wastes some space.
I want to try to solve the issue for all possible dynamic handling of
ISA extensions at boot time. Inspired by Mark[2], this patch introduces
riscv_has_extension_*() helpers, which work like static branches but
are patched using alternatives, thus the metadata can be freed after
patching.
[1]https://lore.kernel.org/linux-riscv/20220922060958.44203-1-samuel@sholland.org/
[2]https://lore.kernel.org/linux-arm-kernel/20220912162210.3626215-8-mark.rutland@arm.com/
[3]https://lore.kernel.org/linux-riscv/20221130225614.1594256-1-heiko@sntech.de/
* b4-shazam-merge:
riscv: remove riscv_isa_ext_keys[] array and related usage
riscv: KVM: Switch has_svinval() to riscv_has_extension_unlikely()
riscv: cpu_relax: switch to riscv_has_extension_likely()
riscv: alternative: patch alternatives in the vDSO
riscv: switch to relative alternative entries
riscv: module: Add ADD16 and SUB16 rela types
riscv: module: move find_section to module.h
riscv: fpu: switch has_fpu() to riscv_has_extension_likely()
riscv: introduce riscv_has_extension_[un]likely()
riscv: cpufeature: extend riscv_cpufeature_patch_func to all ISA extensions
riscv: hwcap: make ISA extension ids can be used in asm
riscv: cpufeature: detect RISCV_ALTERNATIVES_EARLY_BOOT earlier
riscv: move riscv_noncoherent_supported() out of ZICBOM probe
Link: https://lore.kernel.org/r/20230128172856.3814-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Instead of using absolute addresses for both the old instrucions and
the alternative instructions, use offsets relative to the alt_entry
values. So this not only cuts the size of the alternative entry, but
also meets the prerequisite for patching alternatives in the vDSO,
since absolute alternative entries are subject to dynamic relocation,
which is incompatible with the vDSO building.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-10-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
