This is a quick and low risk fix. Those APIs which
are exposed to other IPs or to support sysfs/hwmon
interfaces or DAL will have lock protection. Meanwhile
no lock protection is enforced for swSMU internal used
APIs. Future optimization is needed.
V2: strip the lock protection for all swSMU internal APIs
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some cases, display fixes memory clock frequency to a high value
rather than the natural memory clock switching.
When we comes back from s3 resume, the request from display is not reset,
this causes the bug which makes the memory clock goes into a low value.
Then due to the insuffcient memory clock, the screen flicks.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix gfx cgpg setting sequence for RLC deadlock at safe mode entry in polling gfx response.
The patch can fix VCN IB test failed and DAL get dispaly count failed issue.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
there are two paths for renoir dc access smu.
one dc access smu directly using bios smc
interface: set disply, dprefclk, etc.
another goes through pplib for get dpm clock
table and set watermmark.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bug fix for pcie paramerers override on swsmu.
Below is a scenario to have this problem.
pptable definition on pcie dpm:
0 -> pcie gen speed:1, pcie lanes: *16
1 -> pcie gen speed:4, pcie lanes: *16
Then if we have a system only have the capbility:
pcie gen speed: 3, pcie lanes: *8,
we will override dpm 1 to pcie gen speed 3, pcie lanes *8.
But the code skips the dpm 0 configuration.
So the real pcie dpm parameters are:
0 -> pcie gen speed:1, pcie lanes: *16
1 -> pcie gen speed:3, pcie lanes: *8
Then the wrong pcie lanes will be toggled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error handling is off by one. We should not free the first
"tables[i].bo" without decrementing "i" because that might result in a
double free. The second problem is that when an error occurs, then the
zeroth element "tables[0].bo" isn't freed.
I had make "i" signed int for the error handling to work, so I just
updated "ret" as well as a clean up.
Fixes: f96357a991 ("drm/amd/powerplay: implement smu_init(fini)_fb_allocations function")
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function needs to drop the mutex before returning.
Fixes: f7e3a5776f ("drm/amd/powerplay: check SMU engine readiness before proceeding on S3 resume")
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the member of is_apu in smu_context need to initlialize by default.
set default value is false (dGPU)
for patch:
drm/amd/powerplay: bypass dpm_context null pointer check guard
for some smu series
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The APU soft freq range set by different way from DGPU, thus need implement
the function respectively base on each common SMU part.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For now APU has no smu_dpm_context structure for containing default/current related dpm tables,
thus will needn't initialize smu_dpm_context to aviod APU null pointer issue.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when multithreading access sysfs of amdgpu_pm_info at the sametime.
the swsmu driver cause smu firmware hang.
eg:
single thread access:
Message A + Param A ==> right
Message B + Param B ==> right
Message C + Param C ==> right
multithreading access:
Message A + Param B ==> error
Message B + Param A ==> error
Message C + Param C ==> right
the patch will add sensor lock(mutex) to avoid this error.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changes to function "smu_suspend" in amdgpu_smu.c is a workaround.
We should get real information about if baco is enabled or not, while we
always consider APU SMU feature as enabled in current code.
I know APU do not support baco mode for GPU reset, so I use
"adev->flags" to skip function "smu_feature_is_enabled".
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sdma_v4 should be ungated when the IP resume back,
otherwise it will hang up and resume time out error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix bellow patch issue:
drm/amd/powerplay: introduce smu table id type to handle the smu table
for each asic
----
"This patch introduces new smu table type, it's to handle the
different smu table
defines for each asic with the same smu ip."
before:
use smu->table_count to represent the actual table count in smc firmware
use actual table count to check smu function parameter about smu table
after:
use logic table count "SMU_TABLE_COUNT" to check function parameter
because table id already mapped in smu driver,
and smu function will use logic table id not actual table id to check func parameter.
v2: squash in warning fix
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to update in cache feature enablement status after pp_feature
settings. Another fix for the commit below:
drm/amd/powerplay: implment sysfs feature status function in smu
V2: update smu_feature_update_enable_state() and relates
V3: use bitmap_or and bitmap_andnot
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add the get_dpm_ultimate_freq for supporting different swSMU.
-v2:
Handle the unsupported clock type and read smc message failed case and return error code.
Move the smu12 uclk frequency retrieved logic to renoir ppt.
-v3:
Use goto clause to handle invalidate clk index.
Add the limited tag for smu_get_dpm_uclk to avoid other likewise interface introduced.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no driver message to enable/disable feature mask for APU.
For the sake of APU reusing swSMU interface and assume APU supports all
the feature.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid the dpm frequence range get failed when DPM enabled and it
will be enabled later once handle well the feature bit map struct.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir DPM is not functional so far, we skip it for the comment.
Will revert this patch once SMU 12 is functional.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Implement PowerUpSDMA/PowerDownSDMA interfaces in the swSMU for renoir
2.adjust smu ip block ahead of gfx&sdma ip block
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
change the smu_read_sensor sequence to:
asic specific sensor read -> smu v11 specific sensor read -> smu v11 common sensor read
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a few spelling mistakes "unknow" -> "unknown" and
"enabeld" -> "enabled". Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two occurrances of off-by-one upper bound checking of indexes
causing potential out-of-bounds array reads. Fix these.
Addresses-Coverity: ("Out-of-bounds read")
Fixes: cb33363d0e ("drm/amd/powerplay: add smu feature name support")
Fixes: 6b294793e3 ("drm/amd/powerplay: add smu message name support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The power limit retrieval should be done per asic. Since we may
need to lookup in the pptable and that's really asic specific.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Unified feature enable status format in sysfs
2. Rename ppfeature to pp_features to adapt other pp sysfs node name
3. this function support all asic, not asic related function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Rui Huang <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
