[ Upstream commit 70445dee1b ]
DOWNSPREAD_CTRL (0x107) shall be cleared to 0 upon power-on reset or an
upstream device disconnect. This patch will enforce this rule by always
cleared DOWNSPREAD_CTRL register to 0 before start link training. At rare
case that DP MSA timing parameters may be mis-interpreted by the sink
which causes audio sampling rate be calculated wrongly and cause audio
did not work at sink if DOWNSPREAD_CTRL register is not cleared to 0.
Changes in v2:
1) fix spelling at commit text
2) merge ssc variable into encoding[0]
Changes in v3:
-- correct spelling of DOWNSPREAD_CTRL
-- replace err with len of ssize_t
Changes in v4:
-- split into 2 patches
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: c943b4948b ("drm/msm/dp: add displayPort driver support")
Patchwork: https://patchwork.freedesktop.org/patch/502532/
Link: https://lore.kernel.org/r/1662999830-13916-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a66124796 ]
DRM commit_tails() will disable downstream crtc/encoder/bridge if
both disable crtc is required and crtc->active is set before pushing
a new frame downstream.
There is a rare case that user space display manager issue an extra
screen update immediately followed by close DRM device while down
stream display interface is disabled. This extra screen update will
timeout due to the downstream interface is disabled but will cause
crtc->active be set. Hence the followed commit_tails() called by
drm_release() will pass the disable downstream crtc/encoder/bridge
conditions checking even downstream interface is disabled.
This cause the crash to happen at dp_bridge_disable() due to it trying
to access the main link register to push the idle pattern out while main
link clocks is disabled.
This patch adds atomic_check to prevent the extra frame will not
be pushed down if display interface is down so that crtc->active
will not be set neither. This will fail the conditions checking
of disabling down stream crtc/encoder/bridge which prevent
drm_release() from calling dp_bridge_disable() so that crash
at dp_bridge_disable() prevented.
There is no protection in the DRM framework to check if the display
pipeline has been already disabled before trying again. The only
check is the crtc_state->active but this is controlled by usermode
using UAPI. Hence if the usermode sets this and then crashes, the
driver needs to protect against double disable.
SError Interrupt on CPU7, code 0x00000000be000411 -- SError
CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19
Hardware name: Google Lazor (rev3 - 8) (DT)
pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __cmpxchg_case_acq_32+0x14/0x2c
lr : do_raw_spin_lock+0xa4/0xdc
sp : ffffffc01092b6a0
x29: ffffffc01092b6a0 x28: 0000000000000028 x27: 0000000000000038
x26: 0000000000000004 x25: ffffffd2973dce48 x24: 0000000000000000
x23: 00000000ffffffff x22: 00000000ffffffff x21: ffffffd2978d0008
x20: ffffffd2978d0008 x19: ffffff80ff759fc0 x18: 0000000000000000
x17: 004800a501260460 x16: 0441043b04600438 x15: 04380000089807d0
x14: 07b0089807800780 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000438 x10: 00000000000007d0 x9 : ffffffd2973e09e4
x8 : ffffff8092d53300 x7 : ffffff808902e8b8 x6 : 0000000000000001
x5 : ffffff808902e880 x4 : 0000000000000000 x3 : ffffff80ff759fc0
x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffffff80ff759fc0
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19
Hardware name: Google Lazor (rev3 - 8) (DT)
Call trace:
dump_backtrace.part.0+0xbc/0xe4
show_stack+0x24/0x70
dump_stack_lvl+0x68/0x84
dump_stack+0x18/0x34
panic+0x14c/0x32c
nmi_panic+0x58/0x7c
arm64_serror_panic+0x78/0x84
do_serror+0x40/0x64
el1h_64_error_handler+0x30/0x48
el1h_64_error+0x68/0x6c
__cmpxchg_case_acq_32+0x14/0x2c
_raw_spin_lock_irqsave+0x38/0x4c
lock_timer_base+0x40/0x78
__mod_timer+0xf4/0x25c
schedule_timeout+0xd4/0xfc
__wait_for_common+0xac/0x140
wait_for_completion_timeout+0x2c/0x54
dp_ctrl_push_idle+0x40/0x88
dp_bridge_disable+0x24/0x30
drm_atomic_bridge_chain_disable+0x90/0xbc
drm_atomic_helper_commit_modeset_disables+0x198/0x444
msm_atomic_commit_tail+0x1d0/0x374
commit_tail+0x80/0x108
drm_atomic_helper_commit+0x118/0x11c
drm_atomic_commit+0xb4/0xe0
drm_client_modeset_commit_atomic+0x184/0x224
drm_client_modeset_commit_locked+0x58/0x160
drm_client_modeset_commit+0x3c/0x64
__drm_fb_helper_restore_fbdev_mode_unlocked+0x98/0xac
drm_fb_helper_set_par+0x74/0x80
drm_fb_helper_hotplug_event+0xdc/0xe0
__drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xac
drm_fb_helper_restore_fbdev_mode_unlocked+0x20/0x2c
drm_fb_helper_lastclose+0x20/0x2c
drm_lastclose+0x44/0x6c
drm_release+0x88/0xd4
__fput+0x104/0x220
____fput+0x1c/0x28
task_work_run+0x8c/0x100
do_exit+0x450/0x8d0
do_group_exit+0x40/0xac
__wake_up_parent+0x0/0x38
invoke_syscall+0x84/0x11c
el0_svc_common.constprop.0+0xb8/0xe4
do_el0_svc+0x8c/0xb8
el0_svc+0x2c/0x54
el0t_64_sync_handler+0x120/0x1c0
el0t_64_sync+0x190/0x194
SMP: stopping secondary CPUs
Kernel Offset: 0x128e800000 from 0xffffffc008000000
PHYS_OFFSET: 0x80000000
CPU features: 0x800,00c2a015,19801c82
Memory Limit: none
Changes in v2:
-- add more commit text
Changes in v3:
-- add comments into dp_bridge_atomic_check()
Changes in v4:
-- rewording the comment into dp_bridge_atomic_check()
Changes in v5:
-- removed quote x at end of commit text
Changes in v6:
-- removed quote x at end of comment in dp_bridge_atomic_check()
Fixes: 8a3b4c17f8 ("drm/msm/dp: employ bridge mechanism for display enable and disable")
Reported-by: Leonard Lausen <leonard@lausen.nl>
Suggested-by: Rob Clark <robdclark@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/17
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/505331/
Link: https://lore.kernel.org/r/1664408211-25314-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a58d2ae57 ]
Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.
This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel panic.
For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.
That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.
A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.
This bug was attempted to be fixed in commit 623f279c77 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:
systemd-shutdown[1]: Powering off.
kvm: exiting hardware virtualization
platform wifi-firmware.0: Removing from iommu group 12
platform video-firmware.0: Removing from iommu group 10
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
lr : drm_modeset_lock_all_ctx+0x48/0x3d0
sp : ffff80000805bb80
x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
Call trace:
drm_modeset_lock_all_ctx+0x3c4/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
---[ end trace 0000000000000000 ]---
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
[0000000000000018] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ww_mutex_lock+0x28/0x32c
lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
sp : ffff80000805bb50
x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018
x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800
x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018
Call trace:
ww_mutex_lock+0x28/0x32c
drm_modeset_lock_all_ctx+0x1b0/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Kernel Offset: 0x495d77c00000 from 0xffff800008000000
PHYS_OFFSET: 0xffffcd8500000000
CPU features: 0x800,00c2a015,19801c82
Memory Limit: none
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Fixes: 9d5cbf5fe4 ("drm/msm: add shutdown support for display platform_driver")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816134612.916527-1-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes for v6.0
- Fix for inconsistent indenting in function msm_dsi_dphy_timing_calc_v3.
This fixes a smatch warning reported by kbot
- Fix to make eDP the first connector in the connected list. This was
mainly done to address a screen corruption issue we were seeing on
sc7280 boards which have eDP as the primary display. The corruption
itself is from usermode but we decided to fix it this way because
things work correct with the primary display as the first one for
usermode
- Fix to populate intf_cfg correctly before calling reset_intf_cfg().
Without this, the display pipeline is not torn down correctly for
writeback
- Specify the correct number of DSI regulators for SDM660. It should
have been 1 but 2 was mentioned
- Specify the correct number of DSI regulators for MSM8996. It should
have been 3 but 2 was mentioned
- Fix for removing DP_RECOVERED_CLOCK_OUT_EN bit for tps4 link training
for DP. This was causing link training failures and hence no display
for a specific DP to HDMI cable on chromebooks
- Fix probe-deferral crash in gpu devfreq
- Fix gpu debugfs deadlock
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuY=jd44itwTkLXVqhnoKgY0BswPTrxDTxCiPG3WbmLA@mail.gmail.com
Data Symbols scrambled is required for tps4 at link training 2.
Therefore SCRAMBLING_DISABLE bit should not be set for tps4 to
work.
RECOVERED_CLOCK_OUT_EN is for enable simple EYE test for jitter
measurement with minimal equipment for embedded applications purpose
and is not required to be set during normal operation. Current
implementation always have RECOVERED_CLOCK_OUT_EN bit set which
cause SCRAMBLING_DISABLE bit wrongly set at tps4 which prevent
tps4 from working.
This patch delete setting RECOVERED_CLOCK_OUT_EN to fix
SCRAMBLING_DISABLE be wrongly set at tps4.
Changes in v2:
-- fix Fixes tag
Changes in v3:
-- revise commit text
Changes in v4:
-- fix commit text newline
Changes in v5:
-- fix commit text line over 75 chars
Fixes: c943b4948b ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/497194/
Link: https://lore.kernel.org/r/1660258670-4200-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
Some userspace presumes that the first connected connector is the main
display, where it's supposed to display e.g. the login screen. For
laptops, this should be the main panel.
This patch call drm_helper_move_panel_connectors_to_head() after
drm_bridge_connector_init() to make sure eDP stay at head of
connected connector list. This fixes unexpected corruption happen
at eDP panel if eDP is not placed at head of connected connector
list.
Changes in v2:
-- move drm_helper_move_panel_connectors_to_head() to
dpu_kms_drm_obj_init()
Changes in v4:
-- move drm_helper_move_panel_connectors_to_head() to msm_drm_init()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: ef7837ff09 ("drm/msm/dp: Add DP controllers for sc7280")
Patchwork: https://patchwork.freedesktop.org/patch/492581/
Link: https://lore.kernel.org/r/1657135928-31195-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Next for v5.20
GPU:
- a619 support
- Fix for unclocked GMU register access
- Devcore dump enhancements
Core:
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
DPU:
- constification of HW catalog
- support for using encoder as CRC source
- WB support on sc7180
- WB resolution fixes
DP:
- dropped custom bulk clock implementation
- made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable
- fix link retraining on resolution change
MDP5:
- MSM8953 perf data
HDMI:
- YAML'ification of schema
- dropped obsolete GPIO support
- misc cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com
To avoid preventing the display from coming up before the rootfs is
mounted, without resorting to packing fw in the initrd, the GPU has
this limbo state where the device is probed, but we aren't ready to
start sending commands to it. This is particularly problematic for
a6xx, since the GMU (which requires fw to be loaded) is the one that
is controlling the power/clk/icc votes.
So defer enabling runpm until we are ready to call gpu->hw_init(),
as that is a point where we know we have all the needed fw and are
ready to start sending commands to the coproc's.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489337/
Link: https://lore.kernel.org/r/20220613182036.2567963-1-robdclark@gmail.com
