Provide a userspace mechanism to pull precise error information upon
failed operations. Extending the current error codes returned by the
interfaces allows userspace to better determine the course of action.
This could be for instance, retrying a failed transaction at a later
point and thus offloading the error handling from the driver.
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220429235644.697372-3-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Normal SQEs are 64-bytes in length, which is fine for all the commands
we support. However, in preparation for supporting passthrough IO,
provide an option for setting up a ring with 128-byte SQEs.
We continue to use the same type for io_uring_sqe, it's marked and
commented with a zero sized array pad at the end. This provides up
to 80 bytes of data for a passthrough command - 64 bytes for the
extra added data, and 16 bytes available at the end of the existing
SQE.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-5.19/io_uring-socket:
io_uring: use the text representation of ops in trace
io_uring: rename op -> opcode
io_uring: add io_uring_get_opcode
io_uring: add type to op enum
io_uring: add socket(2) support
net: add __sys_socket_file()
io_uring: fix trace for reduced sqe padding
io_uring: add fgetxattr and getxattr support
io_uring: add fsetxattr and setxattr support
fs: split off do_getxattr from getxattr
fs: split off setxattr_copy and do_setxattr function from setxattr
* for-5.19/io_uring: (85 commits)
io_uring: don't clear req->kbuf when buffer selection is done
io_uring: eliminate the need to track provided buffer ID separately
io_uring: move provided buffer state closer to submit state
io_uring: move provided and fixed buffers into the same io_kiocb area
io_uring: abstract out provided buffer list selection
io_uring: never call io_buffer_select() for a buffer re-select
io_uring: get rid of hashed provided buffer groups
io_uring: always use req->buf_index for the provided buffer group
io_uring: ignore ->buf_index if REQ_F_BUFFER_SELECT isn't set
io_uring: kill io_rw_buffer_select() wrapper
io_uring: make io_buffer_select() return the user address directly
io_uring: kill io_recv_buffer_select() wrapper
io_uring: use 'sr' vs 'req->sr_msg' consistently
io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg
io_uring: check IOPOLL/ioprio support upfront
io_uring: replace smp_mb() with smp_mb__after_atomic() in io_sq_thread()
io_uring: add IORING_SETUP_TASKRUN_FLAG
io_uring: use TWA_SIGNAL_NO_IPI if IORING_SETUP_COOP_TASKRUN is used
io_uring: set task_work notify method at init time
io-wq: use __set_notify_signal() to wake workers
...
The definition of RFKILL_IOCTL_MAX_SIZE introduced by commit
54f586a915 ("rfkill: make new event layout opt-in") is unusable
since it is based on RFKILL_IOC_EXT_SIZE which has not been defined.
Fix that by replacing the undefined constant with the constant which
is intended to be used in this definition.
Fixes: 54f586a915 ("rfkill: make new event layout opt-in")
Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Link: https://lore.kernel.org/r/20220506172454.120319-1-glebfm@altlinux.org
[add commit message provided later by Dmitry]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If IORING_RECVSEND_POLL_FIRST is set for recv/recvmsg or send/sendmsg,
then we arm poll first rather than attempt a receive or send upfront.
This can be useful if we expect there to be no data (or space) available
for the request, as we can then avoid wasting time on the initial
issue attempt.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many archs have termbits.h as octal numbers. It makes hard for humans
to parse the magnitude of large numbers correctly and to compare with
hex ones of the same define.
Convert octal values to hex.
First step is an automated conversion with:
for i in $(git ls-files | grep 'termbits\.h'); do
awk --non-decimal-data '/^#define\s+[A-Z][A-Z0-9]*\s+0[0-9]/ {
l=int(((length($3) - 1) * 3 + 3) / 4);
repl = sprintf("0x%0" l "x", $3);
print gensub(/[^[:blank:]]+/, repl, 3);
next} {print}' $i > $i~;
mv $i~ $i;
done
On top of that, some manual processing on alignment and number of zeros.
In addition, small tweaks to formatting of a few comments on the same
lines.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/2c8c96f-a12f-aadc-18ac-34c1d371929c@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows userspace to tell kernel to add a new subflow to an existing
mptcp connection.
Userspace provides the token to identify the mptcp-level connection
that needs a change in active subflows and the local and remote
addresses of the new or the to-be-removed subflow.
MPTCP_PM_CMD_SUBFLOW_CREATE requires the following parameters:
{ token, { loc_id, family, loc_addr4 | loc_addr6 }, { family, rem_addr4 |
rem_addr6, rem_port }
MPTCP_PM_CMD_SUBFLOW_DESTROY requires the following parameters:
{ token, { family, loc_addr4 | loc_addr6, loc_port }, { family, rem_addr4 |
rem_addr6, rem_port }
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds a MPTCP netlink command for issuing a
REMOVE_ADDR signal for an address over the chosen MPTCP
connection from a userspace path manager.
The command requires the following parameters: {token, loc_id}.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds a MPTCP netlink interface for issuing
ADD_ADDR advertisements over the chosen MPTCP connection from a
userspace path manager.
The command requires the following parameters:
{ token, { loc_id, family, daddr4 | daddr6 [, dport] } [, if_idx],
flags[signal] }.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds new clock type for the GPIO controller which can
timestamp gpio lines in using hardware means. To expose such
functionalities to the userspace, code has been added where
during line create or set config API calls, it checks for new
clock type and if requested, calls HTE API. During line change
event, the HTE subsystem pushes timestamp data to userspace
through gpiolib-cdev.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND" describes a PSCI call that allows
software to request that a system be placed in the deepest possible
low-power state. Effectively, software can use this to suspend itself to
RAM.
Unfortunately, there really is no good way to implement a system-wide
PSCI call in KVM. Any precondition checks done in the kernel will need
to be repeated by userspace since there is no good way to protect a
critical section that spans an exit to userspace. SYSTEM_RESET and
SYSTEM_OFF are equally plagued by this issue, although no users have
seemingly cared for the relatively long time these calls have been
supported.
The solution is to just make the whole implementation userspace's
problem. Introduce a new system event, KVM_SYSTEM_EVENT_SUSPEND, that
indicates to userspace a calling vCPU has invoked PSCI SYSTEM_SUSPEND.
Additionally, add a CAP to get buy-in from userspace for this new exit
type.
Only advertise the SYSTEM_SUSPEND PSCI call if userspace has opted in.
If a vCPU calls SYSTEM_SUSPEND, punt straight to userspace. Provide
explicit documentation of userspace's responsibilites for the exit and
point to the PSCI specification to describe the actual PSCI call.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-8-oupton@google.com
Introduce a new MP state, KVM_MP_STATE_SUSPENDED, which indicates a vCPU
is in a suspended state. In the suspended state the vCPU will block
until a wakeup event (pending interrupt) is recognized.
Add a new system event type, KVM_SYSTEM_EVENT_WAKEUP, to indicate to
userspace that KVM has recognized one such wakeup event. It is the
responsibility of userspace to then make the vCPU runnable, or leave it
suspended until the next wakeup event.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-7-oupton@google.com
This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV)
that makes it so that when notifications are received by the supervisor the
notifying process will transition to wait killable semantics. Although wait
killable isn't a set of semantics formally exposed to userspace, the
concept is searchable. If the notifying process is signaled prior to the
notification being received by the userspace agent, it will be handled as
normal.
One quirk about how this is handled is that the notifying process
only switches to TASK_KILLABLE if it receives a wakeup from either
an addfd or a signal. This is to avoid an unnecessary wakeup of
the notifying task.
The reasons behind switching into wait_killable only after userspace
receives the notification are:
* Avoiding unncessary work - Often, workloads will perform work that they
may abort (request racing comes to mind). This allows for syscalls to be
aborted safely prior to the notification being received by the
supervisor. In this, the supervisor doesn't end up doing work that the
workload does not want to complete anyways.
* Avoiding side effects - We don't want the syscall to be interruptible
once the supervisor starts doing work because it may not be trivial
to reverse the operation. For example, unmounting a file system may
take a long time, and it's hard to rollback, or treat that as
reentrant.
* Avoid breaking runtimes - Various runtimes do not GC when they are
during a syscall (or while running native code that subsequently
calls a syscall). If many notifications are blocked, and not picked
up by the supervisor, this can get the application into a bad state.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
Linux 5.18-rc5
There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add support for management applications to send an MPI3 Encapsulated NVMe
passthru command to the NVMe devices attached to an Avenger controller.
Since the NVMe drives are exposed as SCSI devices by the controller, the
standard NVMe applications cannot be used to interact with the drives and
the command sets supported are also limited by the controller firmware.
Special handling is required for MPI3 Encapsulated NVMe passthru commands
for PRP/SGL setup in the commands.
Link: https://lore.kernel.org/r/20220429211641.642010-8-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Take care of faults occuring between the PARange and IPA range by
injecting an exception
- Fix S2 faults taken from a host EL0 in protected mode
- Work around Oops caused by a PMU access from a 32bit guest when PMU
has been created. This is a temporary bodge until we fix it for
good.
x86:
- Fix potential races when walking host page table
- Fix shadow page table leak when KVM runs nested
- Work around bug in userspace when KVM synthesizes leaf 0x80000021
on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
- Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: work around QEMU issue with synthetic CPUID leaves
Revert "x86/mm: Introduce lookup_address_in_mm()"
KVM: x86/mmu: fix potential races when walking host page table
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
KVM: arm64: Inject exception on out-of-IPA-range translation fault
KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set
KVM: arm64: Handle host stage-2 faults from 32-bit EL0
This patch is needed because the BASE-T1 uses different registers
for status, control and advertisement to those already
employed in the existing phy-c45 functions.
Where required, genphy_c45 functions will now check whether
the device supports BASE-T1 and use the specific registers
instead: 45.2.7.19 BASE-T1 AN control register,
45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN
advertisement register, 45.2.7.22 BASE-T1 AN LP Base
Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control
register.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added BASE-T1 AN advertisement register (Registers 7.514, 7.515, and
7.516) and BASE-T1 AN LP Base Page ability register (Registers 7.517,
7.518, and 7.519).
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 802.3gc specification defines the 10-BaseT1L link
mode for ethernet trafic on twisted wire pair.
PMA status register can be used to detect if the phy supports
2.4 V TX level and PCS control register can be used to
enable/disable PCS level loopback.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If IORING_SETUP_COOP_TASKRUN is set to use cooperative scheduling for
running task_work, then IORING_SETUP_TASKRUN_FLAG can be set so the
application can tell if task_work is pending in the kernel for this
ring. This allows use cases like io_uring_peek_cqe() to still function
appropriately, or for the task to know when it would be useful to
call io_uring_wait_cqe() to run pending events.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220426014904.60384-7-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If this is set, io_uring will never use an IPI to deliver a task_work
notification. This can be used in the common case where a single task or
thread communicates with the ring, and doesn't rely on
io_uring_cqe_peek().
This provides a noticeable win in performance, both from eliminating
the IPI itself, but also from avoiding interrupting the submitting
task unnecessarily.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220426014904.60384-6-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For now just use a CQE flag for this, with big CQE support we could
return the actual number of bytes left.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-5.19/io_uring-socket: (73 commits)
io_uring: use the text representation of ops in trace
io_uring: rename op -> opcode
io_uring: add io_uring_get_opcode
io_uring: add type to op enum
io_uring: add socket(2) support
net: add __sys_socket_file()
io_uring: fix trace for reduced sqe padding
io_uring: add fgetxattr and getxattr support
io_uring: add fsetxattr and setxattr support
fs: split off do_getxattr from getxattr
fs: split off setxattr_copy and do_setxattr function from setxattr
io_uring: return an error when cqe is dropped
io_uring: use constants for cq_overflow bitfield
io_uring: rework io_uring_enter to simplify return value
io_uring: trace cqe overflows
io_uring: add trace support for CQE overflow
io_uring: allow re-poll if we made progress
io_uring: support MSG_WAITALL for IORING_OP_SEND(MSG)
io_uring: add support for IORING_ASYNC_CANCEL_ANY
io_uring: allow IORING_OP_ASYNC_CANCEL with 'fd' key
...
The task exit struct needs some crucial information to be able to provide
an enhanced version of process and thread accounting. This change
provides:
1. ac_tgid in additon to ac_pid
2. thread group execution walltime in ac_tgetime
3. flag AGROUP in ac_flag to indicate the last task
in a thread group / process
4. device ID and inode of task's /proc/self/exe in
ac_exe_dev and ac_exe_inode
5. tools/accounting/procacct as demonstrator
When a task exits, taskstats are reported to userspace including the
task's pid and ppid, but without the id of the thread group this task is
part of. Without the tgid, the stats of single tasks cannot be correlated
to each other as a thread group (process).
The taskstats documentation suggests that on process exit a data set
consisting of accumulated stats for the whole group is produced. But such
an additional set of stats is only produced for actually multithreaded
processes, not groups that had only one thread, and also those stats only
contain data about delay accounting and not the more basic information
about CPU and memory resource usage. Adding the AGROUP flag to be set
when the last task of a group exited enables determination of process end
also for single-threaded processes.
My applicaton basically does enhanced process accounting with summed
cputime, biggest maxrss, tasks per process. The data is not available
with the traditional BSD process accounting (which is not designed to be
extensible) and the taskstats interface allows more efficient on-the-fly
grouping and summing of the stats, anyway, without intermediate disk
writes.
Furthermore, I do carry statistics on which exact program binary is used
how often with associated resources, getting a picture on how important
which parts of a collection of installed scientific software in different
versions are, and how well they put load on the machine. This is enabled
by providing information on /proc/self/exe for each task. I assume the
two 64-bit fields for device ID and inode are more appropriate than the
possibly large resolved path to keep the data volume down.
Add the tgid to the stats to complete task identification, the flag AGROUP
to mark the last task of a group, the group wallclock time, and
inode-based identification of the associated executable file.
Add tools/accounting/procacct.c as a simplified fork of getdelays.c to
demonstrate process and thread accounting.
[thomas.orgis@uni-hamburg.de: fix version number in comment]
Link: https://lkml.kernel.org/r/20220405003601.7a5f6008@plasteblaster
Link: https://lkml.kernel.org/r/20220331004106.64e5616b@plasteblaster
Signed-off-by: Dr. Thomas Orgis <thomas.orgis@uni-hamburg.de>
Reviewed-by: Ismael Luceno <ismael@iodev.co.uk>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull arm64 fix from Will Deacon:
"Rename and reallocate the PT_ARM_MEMTAG_MTE ELF segment type.
This is a fix to the MTE ELF ABI for a bug that was added during the
most recent merge window as part of the coredump support.
The issue is that the value assigned to the new PT_ARM_MEMTAG_MTE
segment type has already been allocated to PT_AARCH64_UNWIND by the
ELF ABI, so we've bumped the value and changed the name of the
identifier to be better aligned with the existing one"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
elf: Fix the arm64 MTE ELF segment name and value
Fixes for (relatively) old bugs, to be merged in both the -rc and next
development trees.
The merge reconciles the ABI fixes for KVM_EXIT_SYSTEM_EVENT between
5.18 and commit c24a950ec7 ("KVM, SEV: Add KVM_EXIT_SHUTDOWN metadata
for SEV-ES", 2022-04-13).
Fixes for (relatively) old bugs, to be merged in both the -rc and next
development trees:
* Fix potential races when walking host page table
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
* Fix shadow page table leak when KVM runs nested
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags
member that at the time was unused. Unfortunately this extensibility
mechanism has several issues:
- x86 is not writing the member, so it would not be possible to use it
on x86 except for new events
- the member is not aligned to 64 bits, so the definition of the
uAPI struct is incorrect for 32- on 64-bit userspace. This is a
problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately
usage of flags was only introduced in 5.18.
Since padding has to be introduced, place a new field in there
that tells if the flags field is valid. To allow further extensibility,
in fact, change flags to an array of 16 values, and store how many
of the values are valid. The availability of the new ndata field
is tied to a system capability; all architectures are changed to
fill in the field.
To avoid breaking compilation of userspace that was using the flags
field, provide a userspace-only union to overlap flags with data[0].
The new field is placed at the same offset for both 32- and 64-bit
userspace.
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220422103013.34832-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
