Remove IB end boundary requirement,
VPE has no such limitions, use existing
amdgpu_ring_generic_pad_ib() instead.
This is missed in rebase.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When MES is oversubscribed it may not frequently check for new
command submissions from driver if the scheduling load is high.
Response latency as high as 5 seconds has been observed.
Enable a flag which adds a check for new commands between
scheduling quantums.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Cc: Alexandru Tudor <alexandru.tudor@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SI hardware does not have doorbells at all, however currently the code
will try to do the allocation and thus fail, makes SI AMDGPU not usable.
Fix this failure by skipping doorbells allocation when doorbells count
is zero.
Fixes: 54c30d2a8d ("drm/amdgpu: create kernel doorbell pages")
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SI hardware does not have doorbells at all, however currently the code
will try to do the allocation and thus fail, makes SI AMDGPU not usable.
Fix this failure by skipping doorbells allocation when doorbells count
is zero.
Fixes: 54c30d2a8d ("drm/amdgpu: create kernel doorbell pages")
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Here, Adding db_size in byte to find the doorbell's
absolute offset for both 32-bit and 64-bit doorbell sizes.
So that doorbell offset will be aligned based on the doorbell
size.
v2:
- Addressed the review comment from Felix.
v3:
- Adding doorbell_size as parameter to get db absolute offset.
v4:
Squash the two patches into one.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add hub->ctx_distance when read CONTEXT1_CNTL, align w/
write back operation.
v2: fix coding style errors reported by checkpatch.pl (Christian)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_ras_get_context may return NULL if device
not support ras feature, so add check before using.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to read Manufacturer Name and FRU File Id fields. Also add
sysfs device attributes for external usage.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix wrong ip count INFO on spatial partitions. update the query
to return the instance count corresponding to the partition id.
v2:
initialize variables only when required to be (Christian)
move variable declarations to the beginning of function (Christian)
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't update the fault cache if status is 0. In the multiple
fault case, subsequent faults will return a 0 status which is
useless for userspace and replaces the useful fault status, so
only update if status is non-0.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some systems with Navi3x dGPU will attempt to use BACO for runtime
PM but fails to resume properly. This is because on these systems
the root port goes into D3cold which is incompatible with BACO.
This happens because in this case dGPU is connected to a bridge between
root port which causes BOCO detection logic to fail. Fix the intent of
the logic by looking at root port, not the immediate upstream bridge for
_PR3.
Cc: stable@vger.kernel.org
Suggested-by: Jun Ma <Jun.Ma2@amd.com>
Tested-by: David Perry <David.Perry@amd.com>
Fixes: b10c1c5b3a ("drm/amdgpu: add check for ACPI power resources")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Several files declare MIN() or MAX() macros that ignore the types of the
values being compared. Drop these macros and switch to min() min_t(),
and max() from `linux/minmax.h`.
Suggested-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To allow bigger allocations specially on systems such as GFXIP 9.4.3
that use GTT memory for VRAM allocations, relax the limits to
maximize ROCm allocations.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needed to avoid a hardware issue.
v2: force high for all GC11 parts for consistency (Alex)
v3: rebase
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We normally place GART based on the location of VRAM and the
available address space around that, but provide an option
to force a particular location for hardware that needs it.
v2: Switch to passing the placement via parameter
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some systems with Navi3x dGPU will attempt to use BACO for runtime
PM but fails to resume properly. This is because on these systems
the root port goes into D3cold which is incompatible with BACO.
This happens because in this case dGPU is connected to a bridge between
root port which causes BOCO detection logic to fail. Fix the intent of
the logic by looking at root port, not the immediate upstream bridge for
_PR3.
Cc: stable@vger.kernel.org
Suggested-by: Jun Ma <Jun.Ma2@amd.com>
Tested-by: David Perry <David.Perry@amd.com>
Fixes: b10c1c5b3a ("drm/amdgpu: add check for ACPI power resources")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I think this was an abstraction back from when
kfd supported both radeon and amdgpu. Since we just
support amdgpu now, there is no more need for this and
we can use the amdgpu structures directly.
This also avoids having the kfd_cu_info structures on
the stack when inlining which can blow up the stack.
Cc: Arnd Bergmann <arnd@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next for v6.7-rc1:
UAPI Changes:
- drm_file owner is now updated during use, in the case of a drm fd
opened by the display server for a client, the correct owner is
displayed.
- Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo
recycling.
Cross-subsystem Changes:
- Disable boot logo for au1200fb, mmpfb and unexport logo helpers.
Only fbcon should manage display of logo.
- Update freescale in MAINTAINERS.
- Add some bridge files to bridge in MAINTAINERS.
- Update gma500 driver repo in MAINTAINERS to point to drm-misc.
Core Changes:
- Move size computations to drm buddy allocator.
- Make drm_atomic_helper_shutdown(NULL) a nop.
- Assorted small fixes in drm_debugfs, DP-MST payload addition error handling.
- Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling.
- Handle bad (h/v)sync_end in EDID by clipping to htotal.
- Build GPUVM as a module.
Driver Changes:
- Simple drivers don't need to cache prepared result.
- Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot
more drm drivers.
- Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic,
nouveau, tc358768.
- Add NV12 for komeda writeback.
- Add arbitration lost event to synopsis/dw-hdmi-cec.
- Speed up s/r in nouveau by not restoring some big bo's.
- Assorted nouveau display rework in preparation for GSP-RM,
especially related to how the modeset sequence works and
the DP sequence in relation to link training.
- Update anx7816 panel.
- Support NVSYNC and NHSYNC in tegra.
- Allow multiple power domains in simple driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1fae5eb-25b8-192a-9a53-215e1184ce81@linux.intel.com
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
