Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch
the limit from firmware instead of using cached values.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The power source flag should be updated when
[1] System receives an interrupt indicating that the power source
has changed.
[2] System resumes from suspend or runtime suspend
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With WBRF feature supported, as a driver responding to the frequencies,
amdgpu driver is able to do shadow pstate switching to mitigate possible
interference(between its (G-)DDR memory clocks and local radio module
frequency bands used by Wifi 6/6e/7).
--
v1->v2:
- update the prompt for feature support(Lijo)
v8->v9:
- update parameter document for smu_wbrf_event_handler(Simon)
v9->v10:
v10->v11:
- correct the logics for wbrf range sorting(Lijo)
v13:
- Fix the format issue (IIpo Jarvinen)
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The smu needs to get the rlc power down message to sync the rlc state
with smu, the rlc state updating message need to be sent at while smu
begin suspend sequence , otherwise SMU will crash while RLC state is not
notified by driver, and rlc state probally changed after that
notification, so it needs to notify rlc state to smu at the end of the
suspend sequence in amdgpu_device_suspend() that can make sure the rlc
state is correctly set to SMU.
[ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
[ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features.
[ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features!
[ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 110.884394] PM: suspend of devices aborted after 21213.620 msecs
[ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs
[ 110.884405] PM: Some devices failed to suspend, or early wake event detected
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For IMU enabled APUs, after sending the PrepareMp1ForUnload message
to SMU in system_features_control, the RLC registers can't be touched.
The driver to stop the rlc in suspending is no longer required.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the high voltage and temperature issue after the driver is unloaded on smu 13.0.0,
smu 13.0.7 and smu 13.0.10
v2 - fix the code format and make sure it is used on the unload case only.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW will handle the features disablement properly for gpu reset case,
driver involvement may cause some unexpected issues.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for getting power1_cap_min value on smu13 and smu11.
For other Asics, we still use 0 as the default value.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial swSMU support for smu 14 series ASIC.
v2: squash in build fixes and updates (Li Ma)
fix warnings (Alex)
v3: squash in updates (Alex)
v4: squash in updates (Alex)
v5: squash in avg/current power updates (Alex)
Signed-off-by: Li Ma <li.ma@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The matching values for `pcie_gen_cap` and `pcie_width_cap` when
fetched from powerplay tables are 1 byte, so narrow the arguments
to match to ensure min() and max() comparisons without casts.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Assign DEFAULT mode if it supports plpd, otherwise keeps NONE
v2: reduce ip version checks
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the interface to change xgmi per-link power down policy.
v2: split from sysfs interface code and miscellaneous updates
v3: check against XGMI_PLPD_DEFAULT/XGMI_PLPD_OPTIMIZED and
pass PPSMC param
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If vcn is disabled in kernel parameters, don't touch vcn,
otherwise it may cause vcn hang.
v2: delete unnecessary logs
v3: move "is_vcn_enabled" check to smu_dpm_setvcn/jpeg_enable (Evan)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: spaces required around that '=' (ctx:WxV)
ERROR: spaces required around that '&&' (ctx:VxW)
ERROR: that open brace { should be on the previous line
ERROR: space required before the open parenthesis '('
ERROR: space required before the open brace '{'
ERROR: spaces required around that ':' (ctx:VxW)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An intentional delay is added on soft ctf triggered. Then there will
be a double check for the GPU temperature before taking further
action. This can avoid unintended shutdown due to temperature
momentary fluctuation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[For 1P NPS1 mode driver bringup]
Changes required to initialize the amdgpu driver with frontdoor firmware
loading and discovery=2 with the native mode SBIOS that enables CPU GPU
unified interleaved memory.
sudo modprobe amdgpu discovery=2
Once PSP TMR region is reported via the ACPI interface, the dependency
on the ip_discovery.bin will be removed.
Choice of where to allocate driver table is given to each IP version. In
general, both GTT and VRAM domains will be considered. If one of the
tables has a strict restriction for VRAM domain, then only VRAM domain
is considered.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
(lijo: Modified the handling for SMU Tables)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW may boots the ASIC with a different power mode from the system's
real one. Notify PMFW explicitly the power mode the system in. This
is needed only when ACDC switch via gpio is not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang with W=1 reports
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:1700:6: error: variable
'num_of_active_display' set but not used [-Werror,-Wunused-but-set-variable]
int num_of_active_display = 0;
^
This variable is not used so remove it.
Fixes: 75145aab7a ("drm/amdgpu/swsmu: clean up a bunch of stale interfaces")
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
added a sysfs interface for thermal throttling, then userspace
can get/update thermal limit
Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is assumed the pptable used before runpm is same as
the one used afterwards. Thus, we can reuse the stored
copy and do not need to resetup the pptable again.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <feifei.xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The logical operator '&&' will make
smu->ppt_funcs->set_gfx_power_up_by_imu segment fault when
smu->ppt_funcs is NULL.
Signed-off-by: Yu Songping <yusongping@huawei.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
