As well as the last patch, pass struct btrfs_inode to the function and
let it distinguish which data space it is working on in a later patch.
There is no functional change with this commit.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Old code has a lot of int for bool return values, bool is recommended
and done in new code. Convert the trivial cases that do simple 0/false
and 1/true. Functions comment are updated if needed.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The unsigned type is a recommended practice (CWE-190, CWE-194) for bit
shifts to avoid problems with potential unwanted sign extensions.
Although there are no such cases in btrfs codebase, follow the
recommendation.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Using the helper makes it a bit more clear that we're accessing the
first list entry.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the conditional warning instead of typing the whole condition.
Optional message is printed where it seems clear what could be the
problem.
Conversion is left out in btree_csum_one_bio() because of the additional
condition.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move kmapping the page out of btrfs_check_sector_csum().
This allows using bvec_kmap_local() where suitable and reduces the number
of kmap*() calls in the raid56 code.
This also means btrfs_check_sector_csum() will only accept a properly
kmapped address.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename all the exported functions from extent_map.h that don't have a
'btrfs_' prefix in their names, so that they are consistent with all the
other functions, to make it clear they are btrfs specific functions and
to avoid potential name collisions in the future with functions defined
elsewhere in the kernel.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported and don't have a 'btrfs_' prefix in their
names, which goes against coding style conventions. Rename them to have
such prefix, making it clear they are from btrfs and avoiding potential
collisions in the future with functions defined elsewhere outside btrfs.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported and don't have a 'btrfs_' prefix in their
names, which goes against coding style conventions. Rename them to have
such prefix, making it clear they are from btrfs and avoiding potential
collisions in the future with functions defined elsewhere outside btrfs.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported and don't have a 'btrfs_' prefix in their
names, which goes against coding style conventions. Rename them to have
such prefix, making it clear they are from btrfs and avoiding potential
collisions in the future with functions defined elsewhere outside btrfs.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel.
So add a 'btrfs_' prefix to their names to make it clear they are from
btrfs.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel.
So add a 'btrfs_' prefix to their name to make it clear they are from
btrfs.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is an exported function so it should have a 'btrfs_' prefix by
convention, to make it clear it's btrfs specific and to avoid collisions
with functions from elsewhere in the kernel.
So rename it to btrfs_set_extent_bit().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel. One of them has a
double underscore prefix which is also discouraged.
So remove double underscore prefix where applicable and add a 'btrfs_'
prefix to their name to make it clear they are from btrfs.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel. Their double
underscore prefix is also discouraged.
So remove their double underscore prefix, add a 'btrfs_' prefix to their
name to make it clear they are from btrfs and a '_bits' suffix to avoid
collision with btrfs_lock_extent() and btrfs_try_lock_extent().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel. So add a prefix to
their name.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the trivial pattern for path auto free, initialize at the
beginning and free at the end with simple goto -> return conversions.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the trivial pattern for path auto free, initialize at the
beginning and free at the end with simple goto -> return conversions.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the trivial pattern for path auto free, initialize at the
beginning and free at the end with simple goto -> return conversions.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the trivial pattern for path auto free, initialize at the
beginning and free at the end with simple goto -> return conversions.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The most trivial pattern for the auto freeing when the variable is
declared with the macro and the final btrfs_free_path() is removed.
There are almost none goto -> return conversions and there's no other
function cleanup.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Several places are using clear_extent_bit() and passing a NULL value for
the 'cached' argument, which is pointless as they can use instead
clear_extent_bits().
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When the release_folio callback (from struct address_space_operations) is
invoked we don't allow the folio to be released if its range is currently
locked in the inode's io_tree, as it may indicate the folio may be needed
by the task that locked the range.
However if the range is locked because an ordered extent is finishing,
then we can safely allow the folio to be released because ordered extent
completion doesn't need to use the folio at all.
When we are under memory pressure, the kernel starts writeback of dirty
pages (folios) with the goal of releasing the pages from the page cache
after writeback completes, however this often is not possible on btrfs
because:
* Once the writeback completes we queue the ordered extent completion;
* Once the ordered extent completion starts, we lock the range in the
inode's io_tree (at btrfs_finish_one_ordered());
* If the release_folio callback is called while the folio's range is
locked in the inode's io_tree, we don't allow the folio to be
released, so the kernel has to try to release memory elsewhere,
which may result in triggering more writeback or releasing other
pages from the page cache which may be more useful to have around
for applications.
In contrast, when the release_folio callback is invoked after writeback
finishes and before ordered extent completion starts or locks the range,
we allow the folio to be released, as well as when the release_folio
callback is invoked after ordered extent completion unlocks the range.
Improve on this by detecting if the range is locked for ordered extent
completion and if it is, allow the folio to be released. This detection
is achieved by adding a new extent flag in the io_tree that is set when
the range is locked during ordered extent completion.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After commit 52b029f427 ("btrfs: remove unnecessary EXTENT_UPTODATE
state in buffered I/O path") we never set EXTENT_UPTODATE in an inode's
io_tree anymore, but we still have some code attempting to clear that
bit from an inode's io_tree. Remove that code as it doesn't do anything
anymore. The sole use of the EXTENT_UPTODATE bit is for the excluded
extents io_tree (fs_info->excluded_extents), which is used to track the
locations of super blocks, so that their ranges are never marked as free,
making them unavailable for extent allocation.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 1d2fbb7f1f ("btrfs: allow compression even if the range is not
page aligned") introduced the block perfect compression for block size <
page size cases.
Before that commit, if the fs block size is smaller than page size (aka
subpage cases), compressed write is only enabled if the dirty range is
fully page aligned.
This block perfect compression support was introduced in v6.13, and has
been tested for two kernel releases.
I believe it's time to move it out of experimental features so that we
can get more tests in the real world.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from David Sterba:
- fix potential endless loop when discarding a block group when
disabling discard
- reinstate message when setting a large value of mount option 'commit'
- fix a folio leak when async extent submission fails
* tag 'for-6.15-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add back warning for mount option commit values exceeding 300
btrfs: fix folio leak in submit_one_async_extent()
btrfs: fix discard worker infinite loop after disabling discard
If btrfs_reserve_extent() fails while submitting an async_extent for a
compressed write, then we fail to call free_async_extent_pages() on the
async_extent and leak its folios. A likely cause for such a failure
would be btrfs_reserve_extent() failing to find a large enough
contiguous free extent for the compressed extent.
I was able to reproduce this by:
1. mount with compress-force=zstd:3
2. fallocating most of a filesystem to a big file
3. fragmenting the remaining free space
4. trying to copy in a file which zstd would generate large compressed
extents for (vmlinux worked well for this)
Step 4. hits the memory leak and can be repeated ad nauseam to
eventually exhaust the system memory.
Fix this by detecting the case where we fallback to uncompressed
submission for a compressed async_extent and ensuring that we call
free_async_extent_pages().
Fixes: 131a821a24 ("btrfs: fallback if compressed IO fails for ENOSPC")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Co-developed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from David Sterba:
- fix potential inode leak in iget() after memory allocation failure
- in subpage mode, fix extent buffer bitmap iteration when writing out
dirty sectors
- fix range calculation when falling back to COW for a NOCOW file
* tag 'for-6.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: adjust subpage bit start based on sectorsize
btrfs: fix the inode leak in btrfs_iget()
btrfs: fix COW handling in run_delalloc_nocow()
[BUG]
There is a bug report that a syzbot reproducer can lead to the following
busy inode at unmount time:
BTRFS info (device loop1): last unmount of filesystem 1680000e-3c1e-4c46-84b6-56bd3909af50
VFS: Busy inodes after unmount of loop1 (btrfs)
------------[ cut here ]------------
kernel BUG at fs/super.c:650!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 48168 Comm: syz-executor Not tainted 6.15.0-rc2-00471-g119009db2674 #2 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:generic_shutdown_super+0x2e9/0x390 fs/super.c:650
Call Trace:
<TASK>
kill_anon_super+0x3a/0x60 fs/super.c:1237
btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2099
deactivate_locked_super+0xbe/0x1a0 fs/super.c:473
deactivate_super fs/super.c:506 [inline]
deactivate_super+0xe2/0x100 fs/super.c:502
cleanup_mnt+0x21f/0x440 fs/namespace.c:1435
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x269/0x290 kernel/entry/common.c:218
do_syscall_64+0xd4/0x250 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
[CAUSE]
When btrfs_alloc_path() failed, btrfs_iget() directly returned without
releasing the inode already allocated by btrfs_iget_locked().
This results the above busy inode and trigger the kernel BUG.
[FIX]
Fix it by calling iget_failed() if btrfs_alloc_path() failed.
If we hit error inside btrfs_read_locked_inode(), it will properly call
iget_failed(), so nothing to worry about.
Although the iget_failed() cleanup inside btrfs_read_locked_inode() is a
break of the normal error handling scheme, let's fix the obvious bug
and backport first, then rework the error handling later.
Reported-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/20250421102425.44431-1-superman.xpt@gmail.com/
Fixes: 7c855e16ab ("btrfs: remove conditional path allocation in btrfs_read_locked_inode()")
CC: stable@vger.kernel.org # 6.13+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In run_delalloc_nocow(), when the found btrfs_key's offset > cur_offset,
it indicates a gap between the current processing region and
the next file extent. The original code would directly jump to
the "must_cow" label, which increments the slot and forces a fallback
to COW. This behavior might skip an extent item and result in an
overestimated COW fallback range.
This patch modifies the logic so that when a gap is detected:
- If no COW range is already being recorded (cow_start is unset),
cow_start is set to cur_offset.
- cur_offset is then advanced to the beginning of the next extent.
- Instead of jumping to "must_cow", control flows directly to
"next_slot" so that the same extent item can be reexamined properly.
The change ensures that we accurately account for the extent gap and
avoid accidentally extending the range that needs to fallback to COW.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dave Chen <davechen@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs updates from David Sterba:
"User visible changes:
- fall back to buffered write if direct io is done on a file that
requires checksums
- this avoids a problem with checksum mismatch errors, observed
e.g. on virtual images when writes to pages under writeback
cause the checksum mismatch reports
- this may lead to some performance degradation but currently the
recommended setup for VM images is to use the NOCOW file
attribute that also disables checksums
- fast/realtime zstd levels -15 to -1
- supported by mount options (compress=zstd:-5) and defrag ioctl
- improved speed, reduced compression ratio, check the commit for
sample measurements
- defrag ioctl extended to accept negative compression levels
- subpage mode
- remove warning when subpage mode is used, the feature is now
reasonably complete and tested
- in debug mode allow to create 2K b-tree nodes to allow testing
subpage on x86_64 with 4K pages too
Performance improvements:
- in send, better file path caching improves runtime (on sample load
by -30%)
- on s390x with hardware zlib support prepare the input buffer in a
better way to get the best results from the acceleration
- minor speed improvement in encoded read, avoid memory allocation in
synchronous mode
Core:
- enable stable writes on inodes, replacing manually waiting for
writeback and allowing to skip that on inodes without checksums
- add last checks and warnings for out-of-band dirty writes to pages,
requiring a fixup ("fixup worker"), this should not be necessary
since 5.8 where get_user_page() and pin_user_pages*() prevent this
- long history behind that, we'll be happy to remove the whole
infrastructure in the near future
- more folio API conversions and preparations for large folio support
- subpage cleanups and refactoring, split handling of data and
metadata to allow future support for large folios
- readpage works as block-by-block, no change for normal mode, this
is preparation for future subpage updates
- block group refcount fixes and hardening
- delayed iput fixes
- in zoned mode, fix zone activation on filesystem with missing
devices
Cleanups:
- inode parameter cleanups
- path auto-freeing updates
- code flow simplifications in send
- redundant parameter cleanups"
* tag 'for-6.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (164 commits)
btrfs: zoned: fix zone finishing with missing devices
btrfs: zoned: fix zone activation with missing devices
btrfs: remove end_no_trans label from btrfs_log_inode_parent()
btrfs: simplify condition for logging new dentries at btrfs_log_inode_parent()
btrfs: remove redundant else statement from btrfs_log_inode_parent()
btrfs: use memcmp_extent_buffer() at replay_one_extent()
btrfs: update outdated comment for overwrite_item()
btrfs: use variables to store extent buffer and slot at overwrite_item()
btrfs: avoid unnecessary memory allocation and copy at overwrite_item()
btrfs: don't clobber ret in btrfs_validate_super()
btrfs: prepare btrfs_page_mkwrite() for large folios
btrfs: prepare extent_io.c for future large folio support
btrfs: prepare btrfs_launcher_folio() for large folios support
btrfs: replace PAGE_SIZE with folio_size for subpage.[ch]
btrfs: add a size parameter to btrfs_alloc_subpage()
btrfs: subpage: make btrfs_is_subpage() check against a folio
btrfs: add extra warning if delayed iput is added when it's not allowed
btrfs: avoid redundant path slot assignment in btrfs_search_forward()
btrfs: remove unnecessary btrfs_key local variable in btrfs_search_forward()
btrfs: simplify the return value handling in search_ioctl()
...
Pull vfs async dir updates from Christian Brauner:
"This contains cleanups that fell out of the work from async directory
handling:
- Change kern_path_locked() and user_path_locked_at() to never return
a negative dentry. This simplifies the usability of these helpers
in various places
- Drop d_exact_alias() from the remaining place in NFS where it is
still used. This also allows us to drop the d_exact_alias() helper
completely
- Drop an unnecessary call to fh_update() from nfsd_create_locked()
- Change i_op->mkdir() to return a struct dentry
Change vfs_mkdir() to return a dentry provided by the filesystems
which is hashed and positive. This allows us to reduce the number
of cases where the resulting dentry is not positive to very few
cases. The code in these places becomes simpler and easier to
understand.
- Repack DENTRY_* and LOOKUP_* flags"
* tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: fix inline emphasis warning
VFS: Change vfs_mkdir() to return the dentry.
nfs: change mkdir inode_operation to return alternate dentry if needed.
fuse: return correct dentry for ->mkdir
ceph: return the correct dentry on mkdir
hostfs: store inode in dentry after mkdir if possible.
Change inode_operations.mkdir to return struct dentry *
nfsd: drop fh_update() from S_IFDIR branch of nfsd_create_locked()
nfs/vfs: discard d_exact_alias()
VFS: add common error checks to lookup_one_qstr_excl()
VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry
VFS: repack LOOKUP_ bit flags.
VFS: repack DENTRY_ flags.
That function is only calling btrfs_qgroup_free_data(), which doesn't
care about the size of the folio.
Just replace the fixed PAGE_SIZE with folio_size().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To support large data folios, we can no longer assume every filemap
folio is page sized.
So btrfs_is_subpage() check must be done against a folio.
Thankfully for metadata folios, we have the full control and ensure a
large folio will not be large than nodesize, so
btrfs_meta_is_subpage() doesn't need this change.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since I have triggered the ASSERT() on the delayed iput too many times,
now is the time to add some extra debug warnings for delayed iput.
All delayed iputs should be queued after all ordered extents finish
their IO and all involved workqueues are flushed.
Thus after the btrfs_run_delayed_iputs() inside close_ctree(), there
should be no more delayed puts added.
So introduce a new BTRFS_FS_STATE_NO_DELAYED_IPUT, set after the above
mentioned timing. And all btrfs_add_delayed_iput() will check that flag
and give a WARN_ON_ONCE().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's an internal function and btrfs_iget() is now returning a btrfs inode,
so change btrfs_iget_path() to also return a btrfs inode instead of a VFS
inode.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's an internal function and most of the time the callers are doing a lot
of BTRFS_I() calls on the returned VFS inode to get the btrfs inode, so
change the return type to struct btrfs_inode instead.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The zstd and zlib compression types support setting compression levels.
Enhance the defrag interface to specify the levels as well. For zstd the
negative (realtime) levels are also accepted.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[OUT-OF-BAND DIRTY FOLIOS]
An out-of-band folio means the folio is marked dirty but without
notifying the filesystem.
This can lead to various problems, not limited to:
- No folio::private to track per block status
- No proper space reserved for such a dirty folio
[HISTORY IN BTRFS]
This used to be a problem related to get_user_page(), but with the
introduction of pin_user_pages*(), we should no longer hit such
case anymore.
In btrfs, we have a long history of catching such out-of-band dirty
folios by:
- Mark the folio ordered during delayed allocation
- Check the folio ordered flag during writeback
If the folio has no ordered flag, it means it doesn't go through
delayed allocation, thus it's definitely an out-of-band
one.
If we got one, we go through COW fixup, which will re-dirty the folio
with proper handling in another workqueue.
[PROBLEMS OF COW-FIXUP]
Such workaround is a blockage for us to migrate to iomap (it requires
extra flags to trace if a folio is dirtied by the fs or not) and I'd
argue it's not data checksum safe, since if a folio can be marked dirty
without informing the fs, the content can also change at any time.
But with the introduction of pin_user_pages*() during v5.8 merge
window, such out-of-band dirty folio such be treated as a bug.
Ext4 has treated such case by warning and erroring out even before
pin_user_pages*().
Furthermore, there are already proofs that such folio ordered flag
tracking can be screwed up by incorrect error handling, check the commit
messages of the following commits:
06f3642847 ("btrfs: do proper folio cleanup when cow_file_range() failed")
c2b47df81c ("btrfs: do proper folio cleanup when run_delalloc_nocow() failed")
[FIXES]
Unlike btrfs, ext4 and xfs (iomap) never bother handling such
out-of-band dirty folios.
- Ext4 just warns and errors out
- Iomap always follows the folio/block dirty flags
And there is nothing really COW specific, xfs also supports COW too.
Here we take one step towards ext4 by doing warning and erroring out.
But since the cow fixup thing is introduced from the beginning, we keep
the old behavior for non-experimental builds, and only do the new warning
for experimental builds before we're 100% sure and remove cow fixup.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs utilizes inline data extent for the following cases:
- Regular small files
- Symlinks
And "btrfs check" detects any file extents that are too large as an
error.
It's not a problem for 4K block size, but for the incoming smaller
block sizes (2K), it can cause problems due to bad limits:
- Non-compressed inline data extents
We do not allow a non-compressed inline data extent to be as large as
block size.
- Symlinks
Currently the only real limit on symlinks are 4K, which can be larger
than 2K block size.
These will result btrfs-check to report too large file extents.
Fix it by adding proper size checks for the above cases.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously inline data extents creation was disabled if the block size
(previously called sector size) is smaller than the page size, for the
following reasons:
- Possible mixed inline and regular data extents
However this is also the same if the block size matches the page size,
thus we do not treat mixed inline and regular extents as an error.
And the chance to cause mixed inline and regular data extents are not
even increased, it has the same requirement (compressed inline data
extent covering the whole first block, followed by regular extents).
- Inability to handle async/inline delalloc range for block size < page
size cases
This is already fixed since commit 1d2fbb7f1f ("btrfs: allow
compression even if the range is not page aligned").
This was the major technical obstacle, but it's not anymore.
With that removed, we can enable inline data extents creation no matter
the block size nor the page size, allowing btrfs to have the same
capacity for all block sizes.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside function __cow_file_range_inline() since the inlined data no
longer take any data space, we need to free up the reserved space.
However the code is still using the old page size == sector size
assumption, and will not handle subpage case well.
Thankfully it is not going to cause any problems because we have two extra
safe nets:
- Inline data extents creation is disabled for sector size < page size
cases for now
But it won't stay that for long.
- btrfs_qgroup_free_data() will only clear ranges which have been already
reserved
So even if we pass a range larger than what we need, it should still
be fine, especially there is only reserved space for a single block at
file offset 0 of an inline data extent.
But just for the sake of consistency, fix the call site to use
sectorsize instead of page size.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently reading an inline data extent will zero out the remaining
range in the page.
This is not yet causing problems even for block size < page size
(subpage) cases because:
1) An inline data extent always starts at file offset 0
Meaning at page read, we always read the inline extent first, before
any other blocks in the page. Then later blocks are properly read out
and re-fill the zeroed out ranges.
2) Currently btrfs will read out the whole page if a buffered write is
not page aligned
So a page is either fully uptodate at buffered write time (covers the
whole page), or we will read out the whole page first.
Meaning there is nothing to lose for such an inline extent read.
But it's still not ideal:
- We're zeroing out the page twice
Once done by read_inline_extent()/uncompress_inline(), once done by
btrfs_do_readpage() for ranges beyond i_size.
- We're touching blocks that don't belong to the inline extent
In the incoming patches, we can have a partial uptodate folio, of
which some dirty blocks can exist while the page is not fully uptodate:
The page size is 16K and block size is 4K:
0 4K 8K 12K 16K
| | |/////////| |
And range [8K, 12K) is dirtied by a buffered write, the remaining
blocks are not uptodate.
If range [0, 4K) contains an inline data extent, and we try to read
the whole page, the current behavior will overwrite range [8K, 12K)
with zero and cause data loss.
So to make the behavior more consistent and in preparation for future
changes, limit the inline data extents read to only zero out the range
inside the first block, not the whole page.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct btrfs_inode to btrfs_inherit_props() as it's an internal
interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct btrfs_inode to btrfs_load_inode_props() as it's an
internal interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct btrfs_inode to btrfs_fill_inode() as it's an internal
interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct btrfs_inode to btrfs_inode() as it's an internal
interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
