While calculating the output rate of a fractional divider clock, the
value is divided and multipled by 10000, discarding the least
significant digits -- presumably to fit the intermediate value within 32
bits.
The precision we're losing is, however, not insignificant for things like
I2S clock. Maybe also elsewhere, now that since commit ea56ad6026 ("clk:
mmp2: Stop pretending PLL outputs are constant") the parent rates are more
precise and no longer rounded to 10000s.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-2-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
bcm2835_debugfs_clock_reg32 is never changed and can therefore be made
const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
26598 16088 64 42750 a6fe drivers/clk/bcm/clk-bcm2835.o
After:
text data bss dec hex filename
26662 16024 64 42750 a6fe drivers/clk/bcm/clk-bcm2835.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lkml.kernel.org/r/20200508220238.4883-1-rikard.falkeborn@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fix the following gcc warning:
drivers/clk/ti/clk-7xx.c:320:43: warning: ‘dra7_gpu_sys_clk_data’
defined but not used [-Wunused-const-variable=]
static const struct omap_clkctrl_div_data dra7_gpu_sys_clk_data
__initconst = {
^~~~~~~~~~~~~~~~~~~~~
drivers/clk/ti/clk-7xx.c:315:27: warning: ‘dra7_gpu_sys_clk_parents’
defined but not used [-Wunused-const-variable=]
static const char * const dra7_gpu_sys_clk_parents[] __initconst = {
^~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lkml.kernel.org/r/20200417073523.42520-1-yanaijie@huawei.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The function _sprd_pll_recalc_rate() defines return value to unsigned
long, but it would return a negative value when malloc fail, changing
to return its parent_rate makes more sense, since if the callback
.recalc_rate() is not set, the framework returns the parent_rate as
well.
Fixes: 3e37b00558 ("clk: sprd: add adjustable pll support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200519030036.1785-2-zhang.lyra@gmail.com
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Clock Generation Unit(CGU) is a new clock controller IP of a forthcoming
Intel network processor SoC named Lightning Mountain(LGM). It provides
programming interfaces to control & configure all CPU & peripheral clocks.
Add common clock framework based clock controller driver for CGU.
Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lkml.kernel.org/r/42a4f71847714df482bacffdcd84341a4052800b.1587102634.git.rahul.tanwar@linux.intel.com
[sboyd@kernel.org: Kill init function to alloc and cleanup newline]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Older firmware version sets BIT(13) in clkflag to mark a
divider as fractional divider. Updated firmware version sets BIT(4)
in type flags to mark a divider as fractional divider since
BIT(13) is defined as CLK_DUTY_CYCLE_PARENT in the common clk
framework flags.
To support both old and new firmware version, consider BIT(13) from
clkflag and BIT(4) from type_flag to check if divider is fractional
or not.
To maintain compatibility BIT(13) of clkflag in firmware will not be
used in future for any purpose and will be marked as unused.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1584048699-24186-3-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
zynqmp_get_divider2_val() calculates, divider value of type DIV2 clock,
considering best possible combination of DIV1 and DIV2.
To find best possible values of DIV1 and DIV2, DIV1's parent rate
should be consider and not DIV2's parent rate since it would rate of
div1 clock. Consider a below topology,
out_clk->div2_clk->div1_clk->fixed_parent
where out_clk = (fixed_parent/div1_clk) / div2_clk, so parent clock
of div1_clk (i.e. out_clk) should be divided by div1_clk and div2_clk.
Existing code divides parent rate of div2_clk's clock instead of
div1_clk's parent rate, which is wrong.
Fix the same by considering div1's parent clock rate.
Fixes: 4ebd92d2e2 ("clk: zynqmp: Fix divider calculation")
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1583185843-20707-3-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There are four different callback functions that are used for the
clk_register callback that all have different second parameter types.
bcm2835_register_pll -> struct bcm2835_pll_data
bcm2835_register_pll_divider -> struct bcm2835_pll_divider_data
bcm2835_register_clock -> struct bcm2835_clock_data
bcm2835_register_date -> struct bcm2835_gate_data
These callbacks are cast to bcm2835_clk_register so that there is no
error about incompatible pointer types. Unfortunately, this is a control
flow integrity violation, which verifies that the callback function's
types match the prototypes exactly before jumping.
[ 0.857913] CFI failure (target: 0xffffff9334a81820):
[ 0.857977] WARNING: CPU: 3 PID: 35 at kernel/cfi.c:29 __cfi_check_fail+0x50/0x58
[ 0.857985] Modules linked in:
[ 0.858007] CPU: 3 PID: 35 Comm: kworker/3:1 Not tainted 4.19.123-v8-01301-gdbb48f16956e4-dirty #1
[ 0.858015] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 0.858031] Workqueue: events 0xffffff9334a925c8
[ 0.858046] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 0.858058] pc : __cfi_check_fail+0x50/0x58
[ 0.858070] lr : __cfi_check_fail+0x50/0x58
[ 0.858078] sp : ffffff800814ba90
[ 0.858086] x29: ffffff800814ba90 x28: 000fffffffdfff3d
[ 0.858101] x27: 00000000002000c2 x26: ffffff93355fdb18
[ 0.858116] x25: 0000000000000000 x24: ffffff9334a81820
[ 0.858131] x23: ffffff93357f3580 x22: ffffff9334af1000
[ 0.858146] x21: a79b57e88f8ebc81 x20: ffffff93357f3580
[ 0.858161] x19: ffffff9334a81820 x18: fffffff679769070
[ 0.858175] x17: 0000000000000000 x16: 0000000000000000
[ 0.858190] x15: 0000000000000004 x14: 000000000000003c
[ 0.858205] x13: 0000000000003044 x12: 0000000000000000
[ 0.858220] x11: b57e91cd641bae00 x10: b57e91cd641bae00
[ 0.858235] x9 : b57e91cd641bae00 x8 : b57e91cd641bae00
[ 0.858250] x7 : 0000000000000000 x6 : ffffff933591d4e5
[ 0.858264] x5 : 0000000000000000 x4 : 0000000000000000
[ 0.858279] x3 : ffffff800814b718 x2 : ffffff9334a84818
[ 0.858293] x1 : ffffff9334bba66c x0 : 0000000000000029
[ 0.858308] Call trace:
[ 0.858321] __cfi_check_fail+0x50/0x58
[ 0.858337] __cfi_check+0x3ab3c/0x4467c
[ 0.858351] bcm2835_clk_probe+0x210/0x2dc
[ 0.858369] platform_drv_probe+0xb0/0xfc
[ 0.858380] really_probe+0x4a0/0x5a8
[ 0.858391] driver_probe_device+0x68/0x104
[ 0.858403] __device_attach_driver+0x100/0x148
[ 0.858418] bus_for_each_drv+0xb0/0x12c
[ 0.858431] __device_attach.llvm.17225159516306086099+0xc0/0x168
[ 0.858443] bus_probe_device+0x44/0xfc
[ 0.858455] deferred_probe_work_func+0xa0/0xe0
[ 0.858472] process_one_work+0x210/0x538
[ 0.858485] worker_thread+0x2e8/0x478
[ 0.858500] kthread+0x154/0x164
[ 0.858515] ret_from_fork+0x10/0x18
To fix this, change the second parameter of all functions void * and use
a local variable with the correct type so that everything works
properly. With this, the only use of bcm2835_clk_register is in struct
bcm2835_clk_desc so we can just remove it and use the type directly.
Fixes: 56eb3a2ed9 ("clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1028
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200516080806.1459784-2-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
bcm2835_register_gate is used as a callback for the clk_register member
of bcm2835_clk_desc, which expects a struct clk_hw * return type but
bcm2835_register_gate returns a struct clk *.
This discrepancy is hidden by the fact that bcm2835_register_gate is
cast to the typedef bcm2835_clk_register by the _REGISTER macro. This
turns out to be a control flow integrity violation, which is how this
was noticed.
Change the return type of bcm2835_register_gate to be struct clk_hw *
and use clk_hw_register_gate to do so. This should be a non-functional
change as clk_register_gate calls clk_hw_register_gate anyways but this
is needed to avoid issues with further changes.
Fixes: b19f009d45 ("clk: bcm2835: Migrate to clk_hw based registration and OF APIs")
Link: https://github.com/ClangBuiltLinux/linux/issues/1028
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200516080806.1459784-1-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk_pm_runtime_get() assumes that the PM-runtime usage counter will
be dropped by pm_runtime_get_sync() on errors, which is not the case,
so PM-runtime references to devices acquired by the former are leaked
on errors returned by the latter.
Fix this by modifying clk_pm_runtime_get() to drop the reference if
pm_runtime_get_sync() returns an error.
Fixes: 9a34b45397 clk: Add support for runtime PM
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
System timer changes for omaps for v5.8 merge window
This series of changes finally gets the legacy omap dual-mode timer and
32k counter system timer updated to use drivers/clocksource and device
tree data. And we can now remove the unused legacy platform data.
These changes are based on an immutable clocksource branch set up by
Daniel Lezcano.
* tag 'omap-for-v5.8/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
ARM: dts: Configure system timers for omap3
ARM: dts: Configure system timers for omap5 and dra7
ARM: dts: Configure system timers for omap4
ARM: dts: Configure system timers for am437x
ARM: dts: Configure system timers for am335x
ARM: OMAP2+: Add omap_init_time_of()
bus: ti-sysc: Ignore timer12 on secure omap3
clk: ti: dm816: enable sysclk6_ck on init
clocksource/drivers/timer-ti-dm: Fix warning for set but not used
clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
clocksource/drivers/timer-ti-32k: Add support for initializing directly
Link: https://lore.kernel.org/r/pull-1590169577-735045@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- make mmsys kconfig entry to depend on ARCH_MEDIATEK instead of a specific SoC
- move clock driver to bind against the new mmsys driver
(mt2712, mt2701, mt8183, mt6797 and mt6779)
* tag 'v5.7-next-soc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
clk/soc: mediatek: mt6779: Bind clock driver from platform device
clk/soc: mediatek: mt6797: Bind clock driver from platform device
clk/soc: mediatek: mt8183: Bind clock driver from platform device
clk / soc: mediatek: Bind clock and gpu driver for mt2701
clk / soc: mediatek: Bind clock and gpu driver for mt2712
soc: mediatek: Enable mmsys driver by default if Mediatek arch is selected
Link: https://lore.kernel.org/r/d2eb19f4-589a-89c1-02ad-9f19a6cfb09a@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Refactor the mmsys to reflect that it's a clock driver and
the entry point for the DRM subsystem.
Replace clk-provider.h include with of_clk.h for mach-mediatek
* tag 'v5.7-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: mediatek: Replace <linux/clk-provider.h> by <linux/of_clk.h>
soc: mediatek: Missing platform_device_unregister() on error in mtk_mmsys_probe()
soc: mediatek: mmsys: Drop <linux/clk-provider.h>
soc / drm: mediatek: Fix mediatek-drm device probing
soc / drm: mediatek: Move routing control to mmsys device
clk / soc: mediatek: Move mt8173 MMSYS to platform driver
dt-bindings: mediatek: Update mmsys binding to reflect it is a system controller
drm/mediatek: Omit warning on probe defers
Link: https://lore.kernel.org/r/2cf27d33-59c6-023b-9993-57a2639824ea@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Switch the bus clk use imx8m_clk_hw_composite_bus, then
we could avoid possible issue when setting mux of the clk.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Introduce imx8m_clk_hw_composite_bus api for bus clk root slice usage.
Because the mux switch sequence issue, we could not reuse Peripheral
Clock Slice code, need use composite specific mux operation.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The CORE/BUS root slice has following design, simplied graph:
The difference is core not have pre_div block.
A composite core/bus clk has 8 inputs for mux to select, saying clk[0-7].
It support target(smart) interface and normal interface. Target interface
is exported for programmer easy to configure ccm root. Normal interface
is also exported, but we not use it in our driver, because it will
introduce more complexity compared with target interface.
The normal interface simplified as below:
SEL_A GA
+--+ +-+
| +->+ +------+
CLK[0-7]--->+ | +-+ |
| | | +----v---+ +----+
| +--+ |pre_diva+----> | +---------+
| +--------+ |mux +--+post_div |
| +--+ |pre_divb+--->+ | +---------+
| | | +----^---+ +----+
+--->+ | +-+ |
| +->+ +------+
+--+ +-+
SEL_B GB
The mux in the upper pic is not the target interface MUX, target
interface MUX is hiding SEL_A and SEL_B. When you choose clk[0-7],
you are actually writing SEL_A or SEL_B depends on the internal
counter which will also control the internal "mux".
The target interface simplified as below which is used by Linux Kernel:
CLK[0-7]--->MUX-->Gate-->pre_div-->post_div
A requirement of the Target Interface's software is that the
target clock source is active, it means when setting SEL_A, the
current input clk to SEL_A must be active, same to SEL_B.
We touch target interface, but hardware logic actually also need
configure normal interface.
There will be system hang, when doing the following steps:
The initial state:
SEL_A/SEL_B are both sourcing from clk0, the internal counter
choose SEL_A.
1. switch mux from clk0 to clk1
The hardware logic will choose SEL_B and configure SEL_B to clk1.
SEL_A no changed.
2. gate off clk0
Disable clk0, then the input to SEL_A is off.
3. swtich from clk1 to clk2
The hardware logic will choose SEL_A and configure SEL_A to clk2,
however the current SEL_A input clk0 is off, the system hang.
The solution to fix the issue is in step 1, write twice to
target interface MUX, it will make SEL_A/SEL_B both sources
from clk1, then no need to care about the state of clk0. And
finally system performs well.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Migrate A53 clk root to use composite core clk type. It
will simplify code and make it easy to use composite
specific mux operation.
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
