Pull IPMI updates from Corey Minyard:
"This is a fairly large rework of the IPMI code, along with a bunch of
smaller fixes. The major changes have been in the next tree for a
couple of months, so they should be good to do in.
- Some users had IPMI systems where the GUID of the IPMI controller
could change. So rescanning of the GUID was added. The naming of
some sysfs things was dependent on the GUID, however, so this
resulted in the sysfs interface code in IPMI changing to remove
that dependency and name the IPMI BMCs like other sysfs devices.
- The ipmi_si_intf.c code was fairly bloated with all the different
discovery methods (PCI, ACPI, SMBIOS, OF, platform, module
parameters, hot add). The structure of how the interfaces were
added was redone to make them more modular, then the individual
methods were pulled out into their own files"
* tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmi: (48 commits)
ipmi_si: Delete an error message for a failed memory allocation in try_smi_init()
ipmi_si: fix memory leak on new_smi
ipmi: remove redundant initialization of bmc
ipmi: pr_err() strings should end with newlines
ipmi: Clean up some print operations
ipmi: Make the DMI probe into a generic platform probe
ipmi: Make the IPMI proc interface configurable
ipmi_ssif: Add device attrs for the things in proc
ipmi_si: Add device attrs for the things in proc
ipmi_si: remove ipmi_smi_alloc() function
ipmi_si: Move port and mem I/O handling to their own files
ipmi_si: Get rid of unused spacing and port fields
ipmi_si: Move PARISC handling to another file
ipmi_si: Move PCI setup to another file
ipmi_si: Move platform device handling to another file
ipmi_si: Move hardcode handling to a separate file.
ipmi_si: Move the hotmod handling to another file.
ipmi_si: Change ipmi_si_add_smi() to take just I/O info
ipmi_si: Move io setup into io structure
ipmi_si: Move irq setup handling into the io struct
...
Pull rdma updates from Doug Ledford:
"This is a fairly plain pull request. Lots of driver updates across the
stack, a huge number of static analysis cleanups including a close to
50 patch series from Bart Van Assche, and a number of new features
inside the stack such as general CQ moderation support.
Nothing really stands out, but there might be a few conflicts as you
take things in. In particular, the cleanups touched some of the same
lines as the new timer_setup changes.
Everything in this pull request has been through 0day and at least two
days of linux-next (since Stephen doesn't necessarily flag new
errors/warnings until day2). A few more items (about 30 patches) from
Intel and Mellanox showed up on the list on Tuesday. I've excluded
those from this pull request, and I'm sure some of them qualify as
fixes suitable to send any time, but I still have to review them
fully. If they contain mostly fixes and little or no new development,
then I will probably send them through by the end of the week just to
get them out of the way.
There was a break in my acceptance of patches which coincides with the
computer problems I had, and then when I got things mostly back under
control I had a backlog of patches to process, which I did mostly last
Friday and Monday. So there is a larger number of patches processed in
that timeframe than I was striving for.
Summary:
- Add iWARP support to qedr driver
- Lots of misc fixes across subsystem
- Multiple update series to hns roce driver
- Multiple update series to hfi1 driver
- Updates to vnic driver
- Add kref to wait struct in cxgb4 driver
- Updates to i40iw driver
- Mellanox shared pull request
- timer_setup changes
- massive cleanup series from Bart Van Assche
- Two series of SRP/SRPT changes from Bart Van Assche
- Core updates from Mellanox
- i40iw updates
- IPoIB updates
- mlx5 updates
- mlx4 updates
- hns updates
- bnxt_re fixes
- PCI write padding support
- Sparse/Smatch/warning cleanups/fixes
- CQ moderation support
- SRQ support in vmw_pvrdma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (296 commits)
RDMA/core: Rename kernel modify_cq to better describe its usage
IB/mlx5: Add CQ moderation capability to query_device
IB/mlx4: Add CQ moderation capability to query_device
IB/uverbs: Add CQ moderation capability to query_device
IB/mlx5: Exposing modify CQ callback to uverbs layer
IB/mlx4: Exposing modify CQ callback to uverbs layer
IB/uverbs: Allow CQ moderation with modify CQ
iw_cxgb4: atomically flush the qp
iw_cxgb4: only call the cq comp_handler when the cq is armed
iw_cxgb4: Fix possible circular dependency locking warning
RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion
IB/core: Only maintain real QPs in the security lists
IB/ocrdma_hw: remove unnecessary code in ocrdma_mbx_dealloc_lkey
RDMA/core: Make function rdma_copy_addr return void
RDMA/vmw_pvrdma: Add shared receive queue support
RDMA/core: avoid uninitialized variable warning in create_udata
RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs
RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP
RDMA/bnxt_re: Set QP state in case of response completion errors
RDMA/bnxt_re: Add memory barriers when processing CQ/EQ entries
...
Pull cgroup updates from Tejun Heo:
"Cgroup2 cpu controller support is finally merged.
- Basic cpu statistics support to allow monitoring by default without
the CPU controller enabled.
- cgroup2 cpu controller support.
- /sys/kernel/cgroup files to help dealing with new / optional
features"
* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: export list of cgroups v2 features using sysfs
cgroup: export list of delegatable control files using sysfs
cgroup: mark @cgrp __maybe_unused in cpu_stat_show()
MAINTAINERS: relocate cpuset.c
cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat
sched: Implement interface for cgroup unified hierarchy
sched: Misc preps for cgroup unified hierarchy interface
sched/cputime: Add dummy cputime_adjust() implementation for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
cgroup: statically initialize init_css_set->dfl_cgrp
cgroup: Implement cgroup2 basic CPU usage accounting
cpuacct: Introduce cgroup_account_cputime[_field]()
sched/cputime: Expose cputime_adjust()
Pull libata updates from Tejun Heo:
"Nothing too interesting or alarming. Other than a new power saving
mode addition to ahci and crash fix on a tracepoint, all changes are
trivial or device-specific"
* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits)
ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
ata: sata_dwc_460ex: Propagate platform device ID to DMA driver
ata: fixes kernel crash while tracing ata_eh_link_autopsy event
ata: pata_pdc2027x: Fix space before '[' error.
libata: fix spelling mistake: 'ambigious' -> 'ambiguous'
ata: ceva: Add SMMU support for SATA IP
ata: ceva: Correct the suspend and resume logic for SATA
ata: ceva: Correct the AXI bus configuration for SATA ports
ata: ceva: Add CCI support for SATA if CCI is enabled
ata: ceva: Make RxWaterMark value as module parameter
ata: ceva: Disable Device Sleep capability
ata: ceva: Add gen 3 mode support in driver
ata: ceva: Move sata port phy oob settings to device-tree
devicetree: bindings: Add sata port phy config parameters in ahci-ceva
ata: mark expected switch fall-throughs
ata: sata_mv: remove a redundant assignment to pointer ehi
ahci: Add support for Cavium's fifth generation SATA controller
ata: sata_rcar: Use of_device_get_match_data() helper
libata: make ata_port_type const
libata: make static arrays const, reduces object code size
...
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
Pull audit updates from Paul Moore:
"Another relatively small pull request for audit, nine patches total.
The only real new bit of functionality is the patch from Richard which
adds the ability to filter records based on the filesystem type.
The remainder are bug fixes and cleanups; the bug fix highlights
include:
- ensuring that we properly audit init/PID-1 (me)
- allowing the audit daemon to shutdown the kernel/auditd connection
cleanly by setting the audit PID to zero (Steve)"
* tag 'audit-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: filter PATH records keyed on filesystem magic
Audit: remove unused audit_log_secctx function
audit: Allow auditd to set pid to 0 to end auditing
audit: Add new syscalls to the perm=w filter
audit: use audit_set_enabled() in audit_enable()
audit: convert audit_ever_enabled to a boolean
audit: don't use simple_strtol() anymore
audit: initialize the audit subsystem as early as possible
audit: ensure that 'audit=1' actually enables audit for PID 1
Pull networking updates from David Miller:
"Highlights:
1) Maintain the TCP retransmit queue using an rbtree, with 1GB
windows at 100Gb this really has become necessary. From Eric
Dumazet.
2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.
3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
Lunn.
4) Add meter action support to openvswitch, from Andy Zhou.
5) Add a data meta pointer for BPF accessible packets, from Daniel
Borkmann.
6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.
7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.
8) More work to move the RTNL mutex down, from Florian Westphal.
9) Add 'bpftool' utility, to help with bpf program introspection.
From Jakub Kicinski.
10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
Dangaard Brouer.
11) Support 'blocks' of transformations in the packet scheduler which
can span multiple network devices, from Jiri Pirko.
12) TC flower offload support in cxgb4, from Kumar Sanghvi.
13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
Leitner.
14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.
15) Add RED qdisc offloadability, and use it in mlxsw driver. From
Nogah Frankel.
16) eBPF based device controller for cgroup v2, from Roman Gushchin.
17) Add some fundamental tracepoints for TCP, from Song Liu.
18) Remove garbage collection from ipv6 route layer, this is a
significant accomplishment. From Wei Wang.
19) Add multicast route offload support to mlxsw, from Yotam Gigi"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
tcp: highest_sack fix
geneve: fix fill_info when link down
bpf: fix lockdep splat
net: cdc_ncm: GetNtbFormat endian fix
openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
netem: remove unnecessary 64 bit modulus
netem: use 64 bit divide by rate
tcp: Namespace-ify sysctl_tcp_default_congestion_control
net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
ipv6: set all.accept_dad to 0 by default
uapi: fix linux/tls.h userspace compilation error
usbnet: ipheth: prevent TX queue timeouts when device not ready
vhost_net: conditionally enable tx polling
uapi: fix linux/rxrpc.h userspace compilation errors
net: stmmac: fix LPI transitioning for dwmac4
atm: horizon: Fix irq release error
net-sysfs: trigger netlink notification on ifalias change via sysfs
openvswitch: Using kfree_rcu() to simplify the code
openvswitch: Make local function ovs_nsh_key_attr_size() static
openvswitch: Fix return value check in ovs_meter_cmd_features()
...
Pull arm64 updates from Will Deacon:
"The big highlight is support for the Scalable Vector Extension (SVE)
which required extensive ABI work to ensure we don't break existing
applications by blowing away their signal stack with the rather large
new vector context (<= 2 kbit per vector register). There's further
work to be done optimising things like exception return, but the ABI
is solid now.
Much of the line count comes from some new PMU drivers we have, but
they're pretty self-contained and I suspect we'll have more of them in
future.
Plenty of acronym soup here:
- initial support for the Scalable Vector Extension (SVE)
- improved handling for SError interrupts (required to handle RAS
events)
- enable GCC support for 128-bit integer types
- remove kernel text addresses from backtraces and register dumps
- use of WFE to implement long delay()s
- ACPI IORT updates from Lorenzo Pieralisi
- perf PMU driver for the Statistical Profiling Extension (SPE)
- perf PMU driver for Hisilicon's system PMUs
- misc cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
arm64: Make ARMV8_DEPRECATED depend on SYSCTL
arm64: Implement __lshrti3 library function
arm64: support __int128 on gcc 5+
arm64/sve: Add documentation
arm64/sve: Detect SVE and activate runtime support
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: Add sysctl to set the default vector length for new processes
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: ptrace and ELF coredump support
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Backend logic for setting the vector length
arm64/sve: Signal handling support
arm64/sve: Support vector length resetting for new processes
arm64/sve: Core task context handling
arm64/sve: Low-level CPU setup
...
Pull RISC-V architecture support from Palmer Dabbelt:
"This contains the core RISC-V Linux port, which has been through nine
rounds of review on various mailing lists. The port is not complete:
there's some cleanup patches moving through the review process, a
whole bunch of drivers that need some work, and a lot of feature
additions that will be needed.
The patches contained in this tag have been through nine rounds of
review on the various mailing lists. I have some outstanding cleanup
patches, but since there's been so much review on these patches I
thought it would be best to submit them as-is and then submit explicit
cleanup patches so everyone can review them. This first patch set is
big enough that it's a bit of a pain to constantly rewrite, and it's
caused a few headaches with various contributors.
The port is definately a work in progress. While what's there builds
and boots with 4.14, it's a bit hard to actually see anything happen
because there are no device drivers yet. I maintain a staging branch
that contains all the device drivers and cleanup that actually works,
but those patches won't all be ready for a while. I'd like to get what
we currently have into your tree so everyone can start working from a
single base -- of particular importance is allowing the glibc
upstreaming process to proceed so we can sort out any possibly
lingering user-visible ABI problems we might have.
Copied below is the ChangeLog that contains the history of this patch
set:
(v9) As per suggestions on our v8 patch set, I've split the core
architecture code out from our drivers and would like to submit
this patch set to be included into linux-next, with the goal
being to be merged in during the next merge window. This patch
set is based on 4.14-rc2, but if it's better to have it based on
something else then I can change it around.
This patch set contains just the core arch code for RISC-V, so
while it builds an nominally boots, you can't print or take an
interrupt so it's not that useful. If you're looking to actually
boot a system it would probably be better to use the full patch
set listed below.
We've collected a handful of tags from reviewers, and the
remainder of the patch set only got minimal feedback last time.
Here's what changed:
- We now use the device tree to initialize the timer driver so
it's less tighly coupled with the arch port.
- I cleaned up the defconfigs -- there's actually now just one,
and it's empty. For now I think we're OK with what the kernel
sets as defaults, but I anticipate we'll begin to expand this
as people start to use the port more.
- The VDSO symbols version is sane.
- We WFI while spinning in the boot loop.
- A handful of comments have been added.
While there are still a handful of FIXMEs in this patch set,
we've started to get enough interest from various users and
contributors that maintaining an out of tree patch set is
starting to become a big burden. Hopefully the patches are good
enough to merge now, which will at least get everyone working in
a more reasonable manner as we clean up the remaining issues.
(v8) I know it may not be the ideal time to submit a patch set right
now, as it's the middle of the merge window, but things have
calmed down quite a bit in the last month so I thought it would
be good to get everyone on the same page. There's been a handful
of changes since the last patch set, but most of them are fairly
minor:
- We changed PAGE_OFFSET to allowing mapping more physical
memory on 64-bit systems. This is user configurable, as it
triggers a different code model that generates slightly less
efficient code.
- The device tree binding documentation is back, I'd managed to
lose it at some point.
- We now pass the atomic64 test suite
- The SBI timer driver has been refactored.
(v7) It's been a while since my last patch set, but the changes han
been fairly minimal:
- The PCI cleanup patches have been dropped, we'll do them as a
separate patch set later.
- We've the Kconfig entries from CONFIG_ISA_* to
CONFIG_RISCV_ISA_*, to make grep easier.
- There have been a handful of memory model related tweaks in
I/O land, particularly relating the PCI and the upcoming
platform specification. There are significant comments in the
relevant files. This is still a WIP, but I think we're close
to getting as good as we're going to get until we end up with
some more specifications.
(v6) As it's been only a day since the v5 patch set, the changes are
pretty minimal:
- The patch set is now based on linux-next/master, which I
believe is a better base now that we're getting closer to
upstream.
- EARLY_PRINTK is no longer an option. Since the SBI console is
reasonable, there's no penalty to enabling it (and thus no
benefit to disabling it).
- The mmap syscalls were refactored a bit.
(v5) Things have really started to calm down, so this is fairly
similar to the v4 patch set. The most interesting changes
include:
- We've moved back to a single patch set.
- SMP support has been fixed, I was accidentally running on a
non-SMP configuration. There were various mistakes all over
the tree as a result of this.
- The cmpxchg syscalls have been removed, as they were deemed a
bad idea. As a result, RISC-V Linux systems mandate the A
extension. The corresponding Kconfig entry to enable builds
on non-A systems has been removed.
- A few more atomic fixes: mostly fence changes, but those
resulted in a handful of additional macros that were no
longer necessary.
- riscv_early_sie has been removed.
(v4) There have only been a few changes since the v3 patch set:
- The cmpxchg64 syscall is no longer enabled on 32-bit systems.
It's not possible to provide this on SMP systems, and it's
not necessary as glibc knows not to call it.
- We provide a ELF_HWCAP so users can determine the ISA of the
machine the kernel is running on.
- The multi-line comments are in a better form.
- There were a handful of headers that could be replaced with
the asm-generic versions, and a few unnecessary definitions.
- We no longer use printk, but instead use pr_*.
- A few Kconfig and defconfig entries have been cleaned up.
(v3) A highlight of the changes since the v2 patch set includes:
- We've split out all our drivers into separate patch sets,
which I've already sent out to the relevant maintainers. I
haven't included those patches in this patch set, but some of
them are necessary to build our port.
- The patch set is now split up differently: rather than being
split per directory it is split per topic. Hopefully this
will make it easier to review the port on the mailing list.
The split is a bit rough, so you probably still want to look
at the patch set as a whole.
- atomic.h has been completely rewritten and is hopefully now
correct. I've attempted to sanitize the various other memory
model related code as well, and I think it should all be sane
now aside from a handful of FIXMEs commented in the code.
- We've changed the cmpexchg syscall to always exist and to not
be multiplexed. There is also a VDSO entry for compare and
exchange, which allows kernels with the A extension to
execute user code without the A extension reasonably fast.
- Our user-visible register state now contains enough space for
the Q extension for 128-bit floating point, as well as a few
words to allow extensibility to future ISA extensions like
the eventual V extension for vectors.
- A handful of driver cleanups, but these have been split into
separate patch sets now so I won't duplicate them here.
(v2) A highlight of the changes since the v1 patch set includes:
- We've split out our drivers into the right places, which
means now there's a lot more patches. I'll be submitting
these patches to various subsystem maintainers and including
them in any future RISC-V patch sets until they've been
merged.
- The SBI console driver has been completely rewritten to use
the HVC helpers and is now significantly smaller.
- We've begun to use weaker barriers as opposed to just the big
"fence". There's still some work to do here, specifically:
- We need fences in the relaxed MMIO functions.
- The non-relaxed MMIO functions are missing R/W bits on their fences.
- Many AMOs need the aq and rl bits set.
- We now have thread_info in task_struct. As a result, sscratch
now contains TP instead of SP. This was necessary because
thread_info is no longer on the stack.
- A few shared routines have been added that we use instead of
creating another arch copy"
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
RISC-V: Build Infrastructure
RISC-V: User-facing API
RISC-V: Paging and MMU
RISC-V: Device, timer, IRQs, and the SBI
RISC-V: Task implementation
RISC-V: ELF and module implementation
RISC-V: Generic library routines and assembly
RISC-V: Atomic and Locking Code
RISC-V: Init and Halt Code
dt-bindings: RISC-V CPU Bindings
lib: Add shared copies of some GCC library routines
MAINTAINERS: Add RISC-V
Pull livepatching updates from Jiri Kosina:
- shadow variables support, allowing livepatches to associate new
"shadow" fields to existing data structures, from Joe Lawrence
- pre/post patch callbacks API, allowing livepatch writers to register
callbacks to be called before and after patch application, from Joe
Lawrence
* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: __klp_disable_patch() should never be called for disabled patches
livepatch: Correctly call klp_post_unpatch_callback() in error paths
livepatch: add transition notices
livepatch: move transition "complete" notice into klp_complete_transition()
livepatch: add (un)patch callbacks
livepatch: Small shadow variable documentation fixes
livepatch: __klp_shadow_get_or_alloc() is local to shadow.c
livepatch: introduce shadow variable API
Pull HID updates from Jiri Kosina:
- high resolution mode for Dell canvas support, from Benjamin Tissoires
- pen handling fixes for the Wacom driver, from Jason Gerecke
- i2c-hid: Apollo-Lake based laptops improvements, from Hans de Goede
- Input/Core: eraser tool support, from Ping Cheng
- new ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook
Stduio and HP Elite book x360) supportm from Masaki Ota
- other smaller assorted fixes
* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
HID: cp2112: fix broken gpio_direction_input callback
HID: cp2112: fix interface specification URL
HID: Wacom: switch Dell canvas into highres mode
HID: wacom: generic: Send BTN_STYLUS3 when both barrel switches are set
HID: sony: Fix SHANWAN pad rumbling on USB
HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 device
HID: add backlight level quirk for Asus ROG laptops
HID: cp2112: add HIDRAW dependency
HID: Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel
HID: hid-logitech: remove redundant assignment to pointer value
HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection
HID: rmi: Check that a device is a RMI device before calling RMI functions
HID: add multi-input quirk for GamepadBlock
HID: alps: add new U1 device ID
HID: alps: add support for Alps T4 Touchpad device
HID: alps: remove variables local to u1_init() from the device struct
HID: alps: properly handle max_fingers and minimum on X and Y axis
HID: alps: Separate U1 device code
HID: alps: delete unnecessary struct u1_dev devInfo
HID: usbhid: Convert timers to use timer_setup()
...
- High resolution mode for DEll canvas support, from Benjamin Tissoires
- A lot of improvements to pen handling in the Wacom driver, from Jason Gerecke
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski
- i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede
- Input/Core: add eraser tool support, from Ping Cheng
- small assorted code fixes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make default TCP default congestion control to a per namespace
value. This changes default congestion control to a pointer to congestion ops
(rather than implicit as first element of available lsit).
The congestion control setting of new namespaces is inherited
from the current setting of the root namespace.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move inclusion of a private kernel header <net/tcp.h>
from uapi/linux/tls.h to its only user - net/tls.h,
to fix the following linux/tls.h userspace compilation error:
/usr/include/linux/tls.h:41:21: fatal error: net/tcp.h: No such file or directory
As to this point uapi/linux/tls.h was totaly unusuable for userspace,
cleanup this header file further by moving other redundant includes
to net/tls.h.
Fixes: 3c4d755915 ("tls: kernel TLS support")
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consistently use types provided by <linux/types.h> to fix the following
linux/rxrpc.h userspace compilation errors:
/usr/include/linux/rxrpc.h:24:2: error: unknown type name 'u16'
u16 srx_service; /* service desired */
/usr/include/linux/rxrpc.h:25:2: error: unknown type name 'u16'
u16 transport_type; /* type of transport socket (SOCK_DGRAM) */
/usr/include/linux/rxrpc.h:26:2: error: unknown type name 'u16'
u16 transport_len; /* length of transport address */
Use __kernel_sa_family_t instead of sa_family_t the same way
as uapi/linux/in.h does, to fix the following
linux/rxrpc.h userspace compilation errors:
/usr/include/linux/rxrpc.h:23:2: error: unknown type name 'sa_family_t'
sa_family_t srx_family; /* address family */
/usr/include/linux/rxrpc.h:28:3: error: unknown type name 'sa_family_t'
sa_family_t family; /* transport address family */
Fixes: 727f891447 ("rxrpc: Expose UAPI definitions to userspace")
Cc: <stable@vger.kernel.org> # v4.14
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull DeviceTree updates from Rob Herring:
"A bigger diffstat than usual with the kbuild changes and a tree wide
fix in the binding documentation.
Summary:
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing
memory leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node.
The prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to
dtb compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage
Technology, shimafuji, Tecon Microprocessor Technologies, DH
electronics GmbH, Opal Kelly, and Next Thing"
* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: usb: add #phy-cells to usb-nop-xceiv
dt-bindings: Remove leading zeros from bindings notation
kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
.gitignore: sort normal pattern rules alphabetically
dt-bindings: add vendor prefix for Next Thing Co.
scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
of: dynamic: fix memory leak related to properties of __of_node_dup
of: overlay: make pr_err() string unique
of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
of: overlay: remove unneeded check for NULL kbasename()
of: overlay: remove a dependency on device node full_name
of: overlay: simplify applying symbols from an overlay
of: overlay: avoid race condition between applying multiple overlays
of: overlay: loosen overly strict phandle clash check
of: overlay: expand check of whether overlay changeset can be removed
of: overlay: detect cases where device tree may become corrupt
of: overlay: minor restructuring
...
Pull LED updates from Jacek Anaszewski:
"New LED class driver:
- add a driver for PC Engines APU/APU2 LEDs
New LED trigger:
- add a system activity LED trigger
LED core improvements:
- replace flags bit shift with BIT() macros
Convert timers to use timer_setup() in:
- led-core
- ledtrig-activity
- ledtrig-heartbeat
- ledtrig-transient
LED class drivers fixes:
- lp55xx: fix spelling mistake: 'cound' -> 'could'
- tca6507: Remove unnecessary reg check
- pca955x: Don't invert requested value in pca955x_gpio_set_value()
LED documentation improvements:
- update 00-INDEX file"
* tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: Add driver for PC Engines APU/APU2 LEDs
leds: lp55xx: fix spelling mistake: 'cound' -> 'could'
leds: Convert timers to use timer_setup()
Documentation: leds: Update 00-INDEX file
leds: tca6507: Remove unnecessary reg check
leds: ledtrig-heartbeat: Convert timers to use timer_setup()
leds: Replace flags bit shift with BIT() macros
leds: pca955x: Don't invert requested value in pca955x_gpio_set_value()
leds: ledtrig-activity: Add a system activity LED trigger
Pull input updates from Dmitry Torokhov:
- three new touchscreen drivers: EETI EXC3000, HiDeep, and Samsung
S6SY761
- the timer API conversion (setup_timer() -> timer_setup())
- a few drivers swiytched to using managed API for creating custom
device attributes
- other assorted fixed and cleanups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: gamecon - mark expected switch fall-throughs
Input: sidewinder - mark expected switch fall-throughs
Input: spaceball - mark expected switch fall-throughs
Input: uinput - unlock on allocation failure in ioctl
Input: add support for the Samsung S6SY761 touchscreen
Input: add support for HiDeep touchscreen
Input: st1232 - remove obsolete platform device support
Input: convert autorepeat timer to use timer_setup()
media: ttpci: remove autorepeat handling and use timer_setup
Input: cyttsp4 - avoid overflows when calculating memory sizes
Input: mxs-lradc - remove redundant assignment to pointer input
Input: add I2C attached EETI EXC3000 multi touch driver
Input: goodix - support gt1151 touchpanel
Input: ps2-gpio - actually abort probe when connected to sleeping GPIOs
Input: hil_mlc - convert to using timer_setup()
Input: hp_sdc - convert to using timer_setup()
Input: touchsceen - convert timers to use timer_setup()
Input: keyboard - convert timers to use timer_setup()
Input: uinput - fold header into the driver proper
Input: uinput - remove uinput_allocate_device()
...
Pull sound updates from Takashi Iwai:
"There are no big surprising changes in this cycle, yet not too boring,
either. The biggest change from diffstat POV is the removal of the
legacy OSS driver codes that have been already disabled for a long
time. This will bring a few trivial merge conflicts.
As new features in ASoC side, there are two things: a new AC97 bus
implementation and AMD Stony platform support. Both include the
relevant changes shared with other subsystems, e.g. AC97 MFD changes
and DRM AMD changes.
Some other highlighted topics are:
- A bunch of USB-audio drivers got the hardening against the
malicious device accesses with a new helper code for endpoint
sanity check
- Lots of cleanups for ASoC Intel platform code, including support
for their open source audio firmware
- Continued ASoC core componentization works
- Support for scaling MCLK with sample rate in ASoC simple-card
- Stabler PCM hot-unplug capability, especially for ASoC usages"
* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
Documentation: sound: hd-audio: notes.rst
ASoC: bcm2835: Support left/right justified and DSP modes
ASoC: bcm2835: Enforce full symmetry
ASoC: bcm2835: Support additional samplerates up to 384kHz
ASoC: bcm2835: Add support for TDM modes
ASoC: add mclk-fs support to audio graph card
ASoC: add mclk-fs to audio graph card binding
ASoC: rt5514: work around link error
ASoC: rt5514: mark PM functions as __maybe_unused
ASoC: rt5663: Check the JD status in the button pushing
ASoC: amd: Modified DMA transfer Mechanism for Playback
ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
ASoC: da7213: add support for DSP modes
ASoC: sun8i-codec: Add a comment on the LRCK inversion
ASoC: sun8i-codec: Set the BCLK divider
ASoC: rt5663: Delay and retry reading rt5663 ID register
ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
ASoC: cs42l56: Fix reset GPIO name in example DT binding
ASoC: rt5514-spi: check irq status to schedule data copy in resume function
...
Pull i2c updates from Wolfram Sang:
"This contains two bigger than usual tree-wide changes this time. They
all have proper acks, caused no merge conflicts in linux-next where
they have been for a while. They are namely:
- to-gpiod conversion of the i2c-gpio driver and its users (touching
arch/* and drivers/mfd/*)
- adding a sbs-manager based on I2C core updates to SMBus alerts
(touching drivers/power/*)
Other notable changes:
- i2c_boardinfo can now carry a dev_name to be used when the device
is created. This is because some devices in ACPI world need fixed
names to find the regulators.
- the designware driver got a long discussed overhaul of its PM
handling. img-scb and davinci got PM support, too.
- at24 driver has way better OF support. And it has a new maintainer.
Thanks Bartosz for stepping up!
The rest is regular driver updates and fixes"
* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
ARM: sa1100: simpad: Correct I2C GPIO offsets
i2c: aspeed: Deassert reset in probe
eeprom: at24: Add OF device ID table
MAINTAINERS: new maintainer for AT24 driver
i2c: nuc900: remove platform_data, too
i2c: thunderx: Remove duplicate NULL check
i2c: taos-evm: Remove duplicate NULL check
i2c: Make i2c_unregister_device() NULL-aware
i2c: xgene-slimpro: Support v2
i2c: mpc: remove useless variable initialization
i2c: omap: Trigger bus recovery in lockup case
i2c: gpio: Add support for named gpios in DT
dt-bindings: i2c: i2c-gpio: Add support for named gpios
i2c: gpio: Local vars in probe
i2c: gpio: Augment all boardfiles to use open drain
i2c: gpio: Enforce open drain through gpiolib
gpio: Make it possible for consumers to enforce open drain
i2c: gpio: Convert to use descriptors
power: supply: sbs-message: fix some code style issues
power: supply: sbs-battery: remove unchecked return var
...
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.15 kernel cycle:
Core:
- Fix the semantics of raw GPIO to actually be raw. No inversion
semantics as before, but also no open draining, and allow the raw
operations to affect lines used for interrupts as the caller
supposedly knows what they are doing if they are getting the big
hammer.
- Rewrote the __inner_function() notation calls to names that make
more sense. I just find this kind of code disturbing.
- Drop the .irq_base() field from the gpiochip since now all IRQs are
mapped dynamically. This is nice.
- Support for .get_multiple() in the core driver API. This allows us
to read several GPIO lines with a single register read. This has
high value for some usecases: it can be used to create
oscilloscopes and signal analyzers and other things that rely on
reading several lines at exactly the same instant. Also a generally
nice optimization. This uses the new assign_bit() macro from the
bitops lib that was ACKed by Andrew Morton and is implemented for
two drivers, one of them being the generic MMIO driver so everyone
using that will be able to benefit from this.
- Do not allow requests of Open Drain and Open Source setting of a
GPIO line simultaneously. If the hardware actually supports
enabling both at the same time the electrical result would be
disastrous.
- A new interrupt chip core helper. This will be helpful to deal with
"banked" GPIOs, which means GPIO controllers with several logical
blocks of GPIO inside them. This is several gpiochips per device in
the device model, in contrast to the case when there is a 1-to-1
relationship between a device and a gpiochip.
New drivers:
- Maxim MAX3191x industrial serializer, a very interesting piece of
professional I/O hardware.
- Uniphier GPIO driver. This is the GPIO block from the recent
Socionext (ex Fujitsu and Panasonic) platform.
- Tegra 186 driver. This is based on the new banked GPIO
infrastructure.
Other improvements:
- Some documentation improvements.
- Wakeup support for the DesignWare DWAPB GPIO controller.
- Reset line support on the DesignWare DWAPB GPIO controller.
- Several non-critical bug fixes and improvements for the Broadcom
BRCMSTB driver.
- Misc non-critical bug fixes like exotic errorpaths, removal of dead
code etc.
- Explicit comments on fall-through switch() statements"
* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
gpio: tegra186: Remove tegra186_gpio_lock_class
gpio: rcar: Add r8a77995 (R-Car D3) support
pinctrl: bcm2835: Fix some merge fallout
gpio: Fix undefined lock_dep_class
gpio: Automatically add lockdep keys
gpio: Introduce struct gpio_irq_chip.first
gpio: Disambiguate struct gpio_irq_chip.nested
gpio: Add Tegra186 support
gpio: Export gpiochip_irq_{map,unmap}()
gpio: Implement tighter IRQ chip integration
gpio: Move lock_key into struct gpio_irq_chip
gpio: Move irq_valid_mask into struct gpio_irq_chip
gpio: Move irq_nested into struct gpio_irq_chip
gpio: Move irq_chained_parent to struct gpio_irq_chip
gpio: Move irq_default_type to struct gpio_irq_chip
gpio: Move irq_handler to struct gpio_irq_chip
gpio: Move irqdomain into struct gpio_irq_chip
gpio: Move irqchip into struct gpio_irq_chip
gpio: Introduce struct gpio_irq_chip
pinctrl: armada-37xx: remove unused variable
...
Pull dma-mapping updates from Christoph Hellwig:
- turn dma_cache_sync into a dma_map_ops instance and remove
implementation that purely are dead because the architecture doesn't
support noncoherent allocations
- add a flag for busses that need DMA configuration (Robin Murphy)
* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: turn dma_cache_sync into a dma_map_ops method
sh: make dma_cache_sync a no-op
xtensa: make dma_cache_sync a no-op
unicore32: make dma_cache_sync a no-op
powerpc: make dma_cache_sync a no-op
mn10300: make dma_cache_sync a no-op
microblaze: make dma_cache_sync a no-op
ia64: make dma_cache_sync a no-op
frv: make dma_cache_sync a no-op
x86: make dma_cache_sync a no-op
floppy: consolidate the dummy fd_cacheflush definition
drivers: flag buses which demand DMA configuration
Pull dmaengine updates from Vinod Koul:
"Updates for this cycle include:
- new driver for Spreadtrum dma controller, ST MDMA and DMAMUX
controllers
- PM support for IMG MDC drivers
- updates to bcm-sba-raid driver and improvements to sun6i driver
- subsystem conversion for:
- timers to use timer_setup()
- remove usage of PCI pool API
- usage of %p format specifier
- minor updates to bunch of drivers"
* tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits)
dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
dmaengine: dmatest: warn user when dma test times out
dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue"
dmaengine: stm32_mdma: activate pack/unpack feature
dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad
dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad
MAINTAINERS: Step down from a co-maintaner of DW DMAC driver
dmaengine: pch_dma: Replace PCI pool old API
dmaengine: Convert timers to use timer_setup()
dmaengine: sprd: Add Spreadtrum DMA driver
dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller
dmaengine: sun6i: Retrieve channel count/max request from devicetree
dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs
dmaengine: bcm-sba-raid: Use common GPL comment header
dmaengine: bcm-sba-raid: Use only single mailbox channel
dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock
dmaengine: pl330: fix descriptor allocation fail
dmaengine: rcar-dmac: use TCRB instead of TCR for residue
dmaengine: sun6i: Add support for Allwinner A64 and compatibles
arm64: allwinner: a64: Add devicetree binding for DMA controller
...
Pull IOMMU updates from Alex Williamson:
"As Joerg mentioned[1], he's out on paternity leave through the end of
the year and I'm filling in for him in the interim:
- Enforce MSI multiple IRQ alignment in AMD IOMMU
- VT-d PASID error handling fixes
- Add r8a7795 IPMMU support
- Manage runtime PM links on exynos at {add,remove}_device callbacks
- Fix Mediatek driver name to avoid conflict
- Add terminate support to qcom fault handler
- 64-bit IOVA optimizations
- Simplfy IOVA domain destruction, better use of rcache, and skip
anchor nodes on copy
- Convert to IOMMU TLB sync API in io-pgtable-arm{-v7s}
- Drop command queue lock when waiting for CMD_SYNC completion on ARM
SMMU implementations supporting MSI to cacheable memory
- iomu-vmsa cleanup inspired by missed IOTLB sync callbacks
- Fix sleeping lock with preemption disabled for RT
- Dual MMU support for TI DRA7xx DSPs
- Optional flush option on IOVA allocation avoiding overhead when
caller can try other options
[1] https://lkml.org/lkml/2017/10/22/72"
* tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfio: (54 commits)
iommu/iova: Use raw_cpu_ptr() instead of get_cpu_ptr() for ->fq
iommu/mediatek: Fix driver name
iommu/ipmmu-vmsa: Hook up r8a7795 DT matching code
iommu/ipmmu-vmsa: Allow two bit SL0
iommu/ipmmu-vmsa: Make IMBUSCTR setup optional
iommu/ipmmu-vmsa: Write IMCTR twice
iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master
iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE()
iommu/ipmmu-vmsa: Enable multi context support
iommu/ipmmu-vmsa: Add optional root device feature
iommu/ipmmu-vmsa: Introduce features, break out alias
iommu/ipmmu-vmsa: Unify ipmmu_ops
iommu/ipmmu-vmsa: Clean up struct ipmmu_vmsa_iommu_priv
iommu/ipmmu-vmsa: Simplify group allocation
iommu/ipmmu-vmsa: Unify domain alloc/free
iommu/ipmmu-vmsa: Fix return value check in ipmmu_find_group_dma()
iommu/vt-d: Clear pasid table entry when memory unbound
iommu/vt-d: Clear Page Request Overflow fault bit
iommu/vt-d: Missing checks for pasid tables if allocation fails
iommu/amd: Limit the IOVA page range to the specified addresses
...
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
updates.
There's no major behaviour change or additions to the core in all of
this, so the potential for regressions should be small (biggest
potential being in the scsi error handler changes)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: lpfc: Fix hard lock up NMI in els timeout handling.
scsi: mpt3sas: remove a stray KERN_INFO
scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event()
scsi: aacraid: use timespec64 instead of timeval
scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions
scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
scsi: mpt3sas: fix dma_addr_t casts
scsi: be2iscsi: Use kasprintf
scsi: storvsc: Avoid excessive host scan on controller change
scsi: lpfc: fix kzalloc-simple.cocci warnings
scsi: mpt3sas: Update mpt3sas driver version.
scsi: mpt3sas: Fix sparse warnings
scsi: mpt3sas: Fix nvme drives checking for tlr.
scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info
scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives.
scsi: mpt3sas: scan and add nvme device after controller reset
scsi: mpt3sas: Set NVMe device queue depth as 128
scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.
scsi: mpt3sas: API's to remove nvme drive from sml
scsi: mpt3sas: API 's to support NVMe drive addition to SML
...
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
Pull configfs updates from Christoph Hellwig:
"A couple of configfs cleanups:
- proper use of the bool type (Thomas Meyer)
- constification of struct config_item_type (Bhumika Goyal)"
* tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs:
RDMA/cma: make config_item_type const
stm class: make config_item_type const
ACPI: configfs: make config_item_type const
nvmet: make config_item_type const
usb: gadget: configfs: make config_item_type const
PCI: endpoint: make config_item_type const
iio: make function argument and some structures const
usb: gadget: make config_item_type structures const
dlm: make config_item_type const
netconsole: make config_item_type const
nullb: make config_item_type const
ocfs2/cluster: make config_item_type const
target: make config_item_type const
configfs: make ci_type field, some pointers and function arguments const
configfs: make config_item_type const
configfs: Fix bool initialization/comparison
Pull quota, ext2, isofs and udf fixes from Jan Kara:
- two small quota error handling fixes
- two isofs fixes for architectures with signed char
- several udf block number overflow and signedness fixes
- ext2 rework of mount option handling to avoid GFP_KERNEL allocation
with spinlock held
- ... it also contains a patch to implement auditing of responses to
fanotify permission events. That should have been in the fanotify
pull request but I mistakenly merged that patch into a wrong branch
and noticed only now at which point I don't think it's worth rebasing
and redoing.
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: be aware of error from dquot_initialize
quota: fix potential infinite loop
isofs: use unsigned char types consistently
isofs: fix timestamps beyond 2027
udf: Fix some sign-conversion warnings
udf: Fix signed/unsigned format specifiers
udf: Fix 64-bit sign extension issues affecting blocks > 0x7FFFFFFF
udf: Remove some outdate references from documentation
udf: Avoid overflow when session starts at large offset
ext2: Fix possible sleep in atomic during mount option parsing
ext2: Parse mount options into a dedicated structure
audit: Record fanotify access control decisions
Pull fsnotify updates from Jan Kara:
- fixes of use-after-tree issues when handling fanotify permission
events from Miklos
- refcount_t conversions from Elena
- fixes of ENOMEM handling in dnotify and fsnotify from me
* 'fsnotify' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: convert fsnotify_mark.refcnt from atomic_t to refcount_t
fanotify: clean up CONFIG_FANOTIFY_ACCESS_PERMISSIONS ifdefs
fsnotify: clean up fsnotify()
fanotify: fix fsnotify_prepare_user_wait() failure
fsnotify: fix pinning group in fsnotify_prepare_user_wait()
fsnotify: pin both inode and vfsmount mark
fsnotify: clean up fsnotify_prepare/finish_user_wait()
fsnotify: convert fsnotify_group.refcnt from atomic_t to refcount_t
fsnotify: Protect bail out path of fsnotify_add_mark_locked() properly
dnotify: Handle errors from fsnotify_add_mark_locked() in fcntl_dirnotify()
Pull gfs2 updates from Bob Peterson:
"We've got a total of 17 GFS2 patches for this merge window. The
patches are basically in three categories: (1) patches related to
broken xfstest cases, (2) patches related to improving iomap and start
using it in GFS2, and (3) general typos and clarifications.
Please note that one of the iomap patches extends beyond GFS2 and
affects other file systems, but it was publically reviewed by a
variety of file system people in the community.
From Andreas Gruenbacher:
- rename variable 'bsize' to 'factor' to clarify the logic related to
gfs2_block_map.
- correctly set ctime in the setflags ioctl, which fixes broken
xfstests test 277.
- fix broken xfstest 258, due to an atime initialization problem.
- fix broken xfstest 307, in which GFS2 was not setting ctime when
setting acls.
- switch general iomap code from blkno to disk offset for a variety
of file systems.
- add a new IOMAP_F_DATA_INLINE flag for iomap to indicate blocks
that have data mixed with metadata.
- implement SEEK_HOLE and SEEK_DATA via iomap in GFS2.
- fix failing xfstest case 066, which was due to not properly syncing
dirty inodes when changing extended attributes.
- fix a minor typo in a comment.
- partially fix xfstest 424, which involved GET_FLAGS and SET_FLAGS
ioctl. This is also a cleanup and simplification of the translation
of flags from fs flags to gfs2 flags.
- add support for STATX_ATTR_ in statx, which fixed broken xfstest
424.
- fix for failing xfstest 093 which fixes a recursive glock problem
with gfs2_xattr_get and _set
From me:
- make inode height info part of the 'metapath' data structure to
facilitate using iomap in GFS2.
- start using iomap inside GFS2 and switch GFS2's block_map functions
to use iomap under the covers.
- switch GFS2's fiemap implementation from using block_map to using
iomap under the covers.
- fix journaled data pages not being properly synced to media when
writing inodes. This was caught with xfstests.
- fix another failing xfstest case in which switching a file from
ordered_write to journaled data via set_flags caused a deadlock"
* tag 'gfs2-4.15.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Allow gfs2_xattr_set to be called with the glock held
gfs2: Add support for statx inode flags
gfs2: Fix and clean up {GET,SET}FLAGS ioctl
gfs2: Fix a harmless typo
gfs2: Fix xattr fsync
GFS2: Take inode off order_write list when setting jdata flag
GFS2: flush the log and all pages for jdata as we do for WB_SYNC_ALL
gfs2: Implement SEEK_HOLE / SEEK_DATA via iomap
GFS2: Switch fiemap implementation to use iomap
GFS2: Implement iomap for block_map
GFS2: Make height info part of metapath
gfs2: Always update inode ctime in set_acl
gfs2: Support negative atimes
gfs2: Update ctime in setflags ioctl
gfs2: Clarify gfs2_block_map
Pull btrfs updates from David Sterba:
"There are some new user features and the usual load of invisible
enhancements or cleanups.
New features:
- extend mount options to specify zlib compression level, -o
compress=zlib:9
- v2 of ioctl "extent to inode mapping", addressing a usecase where
we want to retrieve more but inaccurate results and do the
postprocessing in userspace, aiding defragmentation or
deduplication tools
- populate compression heuristics logic, do data sampling and try to
guess compressibility by: looking for repeated patterns, counting
unique byte values and distribution, calculating Shannon entropy;
this will need more benchmarking and possibly fine tuning, but the
base should be good enough
- enable indexing for btrfs as lower filesystem in overlayfs
- speedup page cache readahead during send on large files
Internal enhancements:
- more sanity checks of b-tree items when reading them from disk
- more EINVAL/EUCLEAN fixups, missing BLK_STS_* conversion, other
errno or error handling fixes
- remove some homegrown IO-related logic, that's been obsoleted by
core block layer changes (batching, plug/unplug, own counters)
- add ref-verify, optional debugging feature to verify extent
reference accounting
- simplify code handling outstanding extents, make it more clear
where and how the accounting is done
- make delalloc reservations per-inode, simplify the code and make
the logic more straightforward
- extensive cleanup of delayed refs code
Notable fixes:
- fix send ioctl on 32bit with 64bit kernel"
* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (102 commits)
btrfs: Fix bug for misused dev_t when lookup in dev state hash table.
Btrfs: heuristic: add Shannon entropy calculation
Btrfs: heuristic: add byte core set calculation
Btrfs: heuristic: add byte set calculation
Btrfs: heuristic: add detection of repeated data patterns
Btrfs: heuristic: implement sampling logic
Btrfs: heuristic: add bucket and sample counters and other defines
Btrfs: compression: separate heuristic/compression workspaces
btrfs: move btrfs_truncate_block out of trans handle
btrfs: don't call btrfs_start_delalloc_roots in flushoncommit
btrfs: track refs in a rb_tree instead of a list
btrfs: add a comp_refs() helper
btrfs: switch args for comp_*_refs
btrfs: make the delalloc block rsv per inode
btrfs: add tracepoints for outstanding extents mods
Btrfs: rework outstanding_extents
btrfs: increase output size for LOGICAL_INO_V2 ioctl
btrfs: add a flags argument to LOGICAL_INO and call it LOGICAL_INO_V2
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents
btrfs: send: remove unused code
...
Pull ext4 updates from Ted Ts'o:
- Add support for online resizing of file systems with bigalloc
- Fix a two data corruption bugs involving DAX, as well as a corruption
bug after a crash during a racing fallocate and delayed allocation.
- Finally, a number of cleanups and optimizations.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve smp scalability for inode generation
ext4: add support for online resizing with bigalloc
ext4: mention noload when recovering on read-only device
Documentation: fix little inconsistencies
ext4: convert timers to use timer_setup()
jbd2: convert timers to use timer_setup()
ext4: remove duplicate extended attributes defs
ext4: add ext4_should_use_dax()
ext4: add sanity check for encryption + DAX
ext4: prevent data corruption with journaling + DAX
ext4: prevent data corruption with inline data + DAX
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ext4: retry allocations conservatively
ext4: Switch to iomap for SEEK_HOLE / SEEK_DATA
ext4: Add iomap support for inline data
iomap: Add IOMAP_F_DATA_INLINE flag
iomap: Switch from blkno to disk offset
Pull fscrypt updates from Ted Ts'o:
"Lots of cleanups, mostly courtesy by Eric Biggers"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: lock mutex before checking for bounce page pool
fscrypt: add a documentation file for filesystem-level encryption
ext4: switch to fscrypt_prepare_setattr()
ext4: switch to fscrypt_prepare_lookup()
ext4: switch to fscrypt_prepare_rename()
ext4: switch to fscrypt_prepare_link()
ext4: switch to fscrypt_file_open()
fscrypt: new helper function - fscrypt_prepare_setattr()
fscrypt: new helper function - fscrypt_prepare_lookup()
fscrypt: new helper function - fscrypt_prepare_rename()
fscrypt: new helper function - fscrypt_prepare_link()
fscrypt: new helper function - fscrypt_file_open()
fscrypt: new helper function - fscrypt_require_key()
fscrypt: remove unneeded empty fscrypt_operations structs
fscrypt: remove ->is_encrypted()
fscrypt: switch from ->is_encrypted() to IS_ENCRYPTED()
fs, fscrypt: add an S_ENCRYPTED inode flag
fscrypt: clean up include file mess
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
* pci/host-tango:
PCI: tango: Add MSI controller support
PCI: Use of_pci_dma_range_parser_init() to reduce duplication
of/pci: Add of_pci_dma_range_parser_init() for dma-ranges parsing support
* pci/virtualization:
PCI: Document reset method return values
PCI: Detach driver before procfs & sysfs teardown on device remove
PCI: Apply Cavium ThunderX ACS quirk to more Root Ports
PCI: Set Cavium ACS capability quirk flags to assert RR/CR/SV/UF
PCI: Restore ARI Capable Hierarchy before setting numVFs
PCI: Create SR-IOV virtfn/physfn links before attaching driver
PCI: Expose SR-IOV offset, stride, and VF device ID via sysfs
PCI: Cache the VF device ID in the SR-IOV structure
PCI: Add Kconfig PCI_IOV dependency for PCI_REALLOC_ENABLE_AUTO
PCI: Remove unused function __pci_reset_function()
PCI: Remove reset argument from pci_iov_{add,remove}_virtfn()
* pci/resource:
PCI: Fail pci_map_rom() if the option ROM is invalid
PCI: Move pci_map_rom() error path
x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)
PCI: Add pci_resize_resource() for resizing BARs
PCI: Add resizable BAR infrastructure
PCI: Add PCI resource type mask #define
* pci/msi:
PCI/portdrv: Compute MSI/MSI-X IRQ vectors after final allocation
PCI/portdrv: Factor out Interrupt Message Number lookup
PCI/portdrv: Consolidate comments
PCI/portdrv: Add #defines for AER and DPC Interrupt Message Number masks
* pci/hotplug:
PCI: pciehp: Do not clear Presence Detect Changed during initialization
PCI: pciehp: Fix race condition handling surprise link down
PCI: Distribute available resources to hotplug-capable bridges
PCI: Distribute available buses to hotplug-capable bridges
PCI: Do not allocate more buses than available in parent
PCI: Open-code the two pass loop when scanning bridges
PCI: Move pci_hp_add_bridge() to drivers/pci/probe.c
PCI: Add for_each_pci_bridge() helper
PCI: shpchp: Convert timers to use timer_setup()
PCI: cpqphp: Convert timers to use timer_setup()
PCI: pciehp: Convert timers to use timer_setup()
PCI: ibmphp: Use common error handling code in unconfigure_boot_device()
Add and use #defines for L1 Substate register fields instead of hard-coding
the masks. Also update comments to use names from the spec. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Reformat register field definitions in the style used elsewhere and align
comments with names used in the spec. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
move tls_make_aad as it is going to be reused
by the device offload code and rx path.
Remove unused recv parameter.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously the TLS ulp context would leak if we attached a TLS ulp
to a socket but did not use the TLS_TX setsockopt,
or did use it but it failed.
This patch solves the issue by overriding prot[TLS_BASE_TX].close
and fixing tls_sk_proto_close to work properly
when its called with ctx->tx_conf == TLS_BASE_TX.
This patch also removes ctx->free_resources as we can use ctx->tx_conf
to obtain the relevant information.
Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tx configuration is now stored in ctx->tx_conf.
And sk->sk_prot is updated trough a function
This will simplify things when we add rx
and support for different possible
tx and rx cross configurations.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
