Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
Pull kselftest updates from Shuah Khan:
- kbuild kselftest-merge target fixes
- fixes to several tests
- resctrl test fixes and enhancements
- ksft_perror() helper and reporting improvements
- printf attribute to kselftest prints to improve reporting
- documentation and clang build warning fixes
The bulk of the patches are for resctrl fixes and enhancements.
* tag 'linux_kselftest-next-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (51 commits)
selftests/resctrl: Fix MBM test failure when MBA unavailable
selftests/clone3: Report descriptive test names
selftests:modify the incorrect print format
selftests/efivarfs: create-read: fix a resource leak
selftests/ftrace: Add riscv support for kprobe arg tests
selftests/ftrace: add loongarch support for kprobe args char tests
selftests/amd-pstate: Added option to provide perf binary path
selftests/amd-pstate: Fix broken paths to run workloads in amd-pstate-ut
selftests/resctrl: Move run_benchmark() to a more fitting file
selftests/resctrl: Fix schemata write error check
selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests
selftests/resctrl: Fix feature checks
selftests/resctrl: Refactor feature check to use resource and feature name
selftests/resctrl: Move _GNU_SOURCE define into Makefile
selftests/resctrl: Remove duplicate feature check from CMT test
selftests/resctrl: Extend signal handler coverage to unmount on receiving signal
selftests/resctrl: Fix uninitialized .sa_flags
selftests/resctrl: Cleanup benchmark argument parsing
selftests/resctrl: Remove ben_count variable
selftests/resctrl: Make benchmark command const and build it with pointers
...
KVM/arm64 updates for 6.7
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
KVM selftests fixes for 6.6:
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
The __printf() macro is used in many tools in the linux kernel to
validate the format specifiers in functions that use printf. The kvm
selftest uses it without putting it in a macro definition while it
also imports the kselftests.h header where the macro attribute is
defined.
Use __printf() from kselftests.h instead of the full attribute.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Extend x86's state to forcefully load *all* host-supported xfeatures by
modifying xstate_bv in the saved state. Stuffing xstate_bv ensures that
the selftest is verifying KVM's full ABI regardless of whether or not the
guest code is successful in getting various xfeatures out of their INIT
state, e.g. see the disaster that is/was MPX.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify support XSAVE state in the "state test's" guest code so that saving
and loading state via KVM_{G,S}ET_XSAVE actually does something useful,
i.e. so that xstate_bv in XSAVE state isn't empty.
Punt on BNDCSR for now, it's easier to just stuff that xfeature from the
host side.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/riscv changes for 6.6
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for Guest/VM
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
KVM: x86: Selftests changes for 6.6:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry
get-reg-list test is used to check for KVM registers regressions
during VM migration which happens when destination host kernel
missing registers that the source host kernel has. The blessed
list registers was created by running on v6.5-rc3
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
No functional changes. Just move the finalize_vcpu call back to
run_test and do weak function trick to prepare for the opration
in riscv.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Rename vcpu_config to vcpu_reg_list to be more specific and add
it to kvm_util.h. While it may not get used outside get-reg-list
tests, exporting it doesn't hurt, as long as it has a unique enough
name. This is a step in the direction of sharing most of the get-
reg-list test code between architectures.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The original author of aarch64/get-reg-list.c (me) was wearing
tunnel vision goggles when implementing str_with_index(). There's
no reason to have such a special case string function. Instead,
take inspiration from glib and implement strdup_printf. The
implementation builds on vasprintf() which requires _GNU_SOURCE,
but we require _GNU_SOURCE in most files already.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Drop the param-based guest assert macros and enable the printf versions
for all selftests. Note! This change can affect tests even if they
don't use directly use guest asserts! E.g. via library code, or due to
the compiler making different optimization decisions.
Link: https://lore.kernel.org/r/20230729003643.1053367-33-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an architecture specific ucall.h and inline the simple arch hooks,
e.g. the init hook for everything except ARM, and the actual "do ucall"
hook for everything except x86 (which should be simple, but temporarily
isn't due to carrying a workaround).
Having a per-arch ucall header will allow adding a #define for the
expected KVM exit reason for a ucall that is colocated (for everything
except x86) with the ucall itself.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230731203026.1192091-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add printf-based GUEST_ASSERT macros and accompanying host-side support to
provide an assert-specific versions of GUEST_PRINTF(). To make it easier
to parse assert messages, for humans and bots alike, preserve/use the same
layout as host asserts, e.g. in the example below, the reported expression,
file, line number, and message are from the guest assertion, not the host
reporting of the assertion.
The call stack still captures the host reporting, but capturing the guest
stack is a less pressing concern, i.e. can be done in the future, and an
optimal solution would capture *both* the host and guest stacks, i.e.
capturing the host stack isn't an outright bug.
Running soft int test
==== Test Assertion Failure ====
x86_64/svm_nested_soft_inject_test.c:39: regs->rip != (unsigned long)l2_guest_code_int
pid=214104 tid=214104 errno=4 - Interrupted system call
1 0x0000000000401b35: run_test at svm_nested_soft_inject_test.c:191
2 0x00000000004017d2: main at svm_nested_soft_inject_test.c:212
3 0x0000000000415b03: __libc_start_call_main at libc-start.o:?
4 0x000000000041714f: __libc_start_main_impl at ??:?
5 0x0000000000401660: _start at ??:?
Expected IRQ at RIP 0x401e50, received IRQ at 0x401e50
Don't bother sharing code between ucall_assert() and ucall_fmt(), as
forwarding the variable arguments would either require using macros or
building a va_list, i.e. would make the code less readable and/or require
just as much copy+paste code anyways.
Gate the new macros with a flag so that tests can more or less be switched
over one-by-one. The slow conversion won't be perfect, e.g. library code
won't pick up the flag, but the only asserts in library code are of the
vanilla GUEST_ASSERT() variety, i.e. don't print out variables.
Add a temporary alias to GUEST_ASSERT_1() to fudge around ARM's
arch_timer.h header using GUEST_ASSERT_1(), thus thwarting any attempt to
convert tests one-by-one.
Link: https://lore.kernel.org/r/20230729003643.1053367-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add more flexibility to guest debugging and testing by adding
GUEST_PRINTF() and GUEST_ASSERT_FMT() to the ucall framework.
Add a sized buffer to the ucall structure to hold the formatted string,
i.e. to allow the guest to easily resolve the string, and thus avoid the
ugly pattern of the host side having to make assumptions about the desired
format, as well as having to pass around a large number of parameters.
The buffer size was chosen to accommodate most use cases, and based on
similar usage. E.g. printf() uses the same size buffer in
arch/x86/boot/printf.c. And 1KiB ought to be enough for anybody.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
[sean: massage changelog, wrap macro param in ()]
Link: https://lore.kernel.org/r/20230729003643.1053367-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add additional pages to the guest to account for the number of pages
the ucall headers need. The only reason things worked before is the
ucall headers are fairly small. If they were ever to increase in
size the guest could run out of memory.
This is done in preparation for adding string formatting options to
the guest through the ucall framework which increases the size of
the ucall headers.
Fixes: 426729b2cf ("KVM: selftests: Add ucall pool based implementation")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230729003643.1053367-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a local version of guest_snprintf() for use in the guest.
Having a local copy allows the guest access to string formatting
options without dependencies on LIBC. LIBC is problematic because
it heavily relies on both AVX-512 instructions and a TLS, neither of
which are guaranteed to be set up in the guest.
The file guest_sprintf.c was lifted from arch/x86/boot/printf.c and
adapted to work in the guest, including the addition of buffer length.
I.e. s/sprintf/snprintf/
The functions where prefixed with "guest_" to allow guests to
explicitly call them.
A string formatted by this function is expected to succeed or die. If
something goes wrong during the formatting process a GUEST_ASSERT()
will be thrown.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/all/mtdi6smhur5rqffvpu7qux7mptonw223y2653x2nwzvgm72nlo@zyc4w3kwl3rg
[sean: add a link to the discussion of other options]
Link: https://lore.kernel.org/r/20230729003643.1053367-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Clean up TEST_ASSERT_EQ() so that the (mostly) raw code is captured in the
main assert message, not the helper macro's code. E.g. make this:
x86_64/tsc_msrs_test.c:106: __a == __b
pid=40470 tid=40470 errno=0 - Success
1 0x000000000040170e: main at tsc_msrs_test.c:106
2 0x0000000000416f23: __libc_start_call_main at libc-start.o:?
3 0x000000000041856f: __libc_start_main_impl at ??:?
4 0x0000000000401ef0: _start at ??:?
TEST_ASSERT_EQ(rounded_host_rdmsr(MSR_IA32_TSC), val + 1) failed.
rounded_host_rdmsr(MSR_IA32_TSC) is 0
val + 1 is 0x1
look like this:
x86_64/tsc_msrs_test.c:106: rounded_host_rdmsr(MSR_IA32_TSC) == val + 1
pid=5737 tid=5737 errno=0 - Success
1 0x0000000000401714: main at tsc_msrs_test.c:106
2 0x0000000000415c23: __libc_start_call_main at libc-start.o:?
3 0x000000000041726f: __libc_start_main_impl at ??:?
4 0x0000000000401e60: _start at ??:?
0 != 0x1 (rounded_host_rdmsr(MSR_IA32_TSC) != val + 1)
Opportunstically clean up the formatting of the entire macro.
Link: https://lore.kernel.org/r/20230729003643.1053367-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There is already an ASSERT_EQ macro in the file
tools/testing/selftests/kselftest_harness.h, so currently KVM selftests
can't include test_util.h from the KVM selftests together with that file.
Rename the macro in the KVM selftests to TEST_ASSERT_EQ to avoid the
problem - it is also more similar to the other macros in test_util.h that
way.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230712075910.22480-2-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use pread() with an explicit offset when reading the header and the header
name for a binary stats fd so that the common helper and the binary stats
test don't subtly rely on the file effectively being untouched, e.g. to
allow multiple reads of the header, name, etc.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mimic the dirty log test and allow the user to pin demand paging test
tasks to physical CPUs.
Put the help message into a general helper as suggested by Sean.
Signed-off-by: Peter Xu <peterx@redhat.com>
[sean: rebase, tweak arg ordering, add "print" to helper, print program name]
Link: https://lore.kernel.org/r/20230607001226.1398889-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM selftests, and an AMX/XCR0 bugfix, for 6.4:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
- Overhaul the AMX selftests to improve coverage and cleanup the test
- Misc cleanups
KVM x86 PMU changes for 6.4:
- Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, and overhaul the vmx_pmu_caps selftest to better
validate PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- Misc cleanups and fixes
Check both architectural rules and KVM's ABI for KVM_GET_SUPPORTED_CPUID
to ensure the supported xfeatures[1] don't violate any of them.
The architectural rules[2] and KVM's contract with userspace ensure for a
given feature, e.g. sse, avx, amx, etc... their associated xfeatures are
either all sets or none of them are set, and any dependencies are enabled
if needed.
[1] EDX:EAX of CPUID.(EAX=0DH,ECX=0)
[2] SDM vol 1, 13.3 ENABLING THE XSAVE FEATURE SET AND XSAVE-ENABLED
FEATURES
Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
[sean: expand comments, use a fancy X86_PROPERTY]
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Take the XFeature mask in __vm_xsave_require_permission() instead of the
bit so that there's no need to define macros for both the bit and the
mask. Asserting that only a single bit is set and retrieving said bit
is easy enough via log2 helpers.
Opportunistically clean up the error message for the
ARCH_REQ_XCOMP_GUEST_PERM sanity check.
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Assert that KVM provides "read what you wrote" semantics for all "durable"
MSRs (for lack of a better name). The extra coverage is cheap from a
runtime performance perspective, and verifying the behavior in the common
helper avoids gratuitous copy+paste in individual tests.
Note, this affects all tests that set MSRs from userspace!
Link: https://lore.kernel.org/r/20230311004618.920745-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reimplement vcpu_set_msr() as a macro and pretty print the failing MSR
(when possible) and the value if KVM_SET_MSRS fails instead of using the
using the standard KVM_IOCTL_ERROR(). KVM_SET_MSRS is somewhat odd in
that it returns the index of the last successful write, i.e. will be
'0' on failure barring an entirely different KVM bug. And for writing
MSRs, the MSR being written and the value being written are almost always
relevant to the failure, i.e. just saying "failed!" doesn't help debug.
Place the string goo in a separate macro in anticipation of using it to
further expand MSR testing.
Link: https://lore.kernel.org/r/20230311004618.920745-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a working xstate data structure for the usage of AMX and potential
future usage on other xstate components. AMX selftest requires checking
both the xstate_bv and xcomp_bv. Existing code relies on pointer
arithmetics to fetch xstate_bv and does not support xcomp_bv.
So, add a working xstate data structure into processor.h for x86.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-3-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM selftests changes for 6.3:
- Cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct
hypercall instruction instead of relying on KVM to patch in VMMCALL
- A variety of one-off cleanups and fixes
