[ Upstream commit a40c5d727b ]
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see
3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates
Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.
Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6bbce873a9 ]
[Why]
The RAD of sideband message printed today is incorrect.
For RAD stored within MST branch
- If MST branch LCT is 1, it's RAD array is untouched and remained as 0.
- If MST branch LCT is larger than 1, use nibble to store the up facing
port number in cascaded sequence as illustrated below:
u8 RAD[0] = (LCT_2_UFP << 4) | LCT_3_UFP
RAD[1] = (LCT_4_UFP << 4) | LCT_5_UFP
...
In drm_dp_mst_rad_to_str(), it wrongly to use BIT_MASK(4) to fetch the port
number of one nibble.
[How]
Adjust the code by:
- RAD array items are valuable only for LCT >= 1.
- Use 0xF as the mask to replace BIT_MASK(4)
V2:
- Document how RAD is constructed (Imre)
V3:
- Adjust the comment for rad[] so kdoc formats it properly (Lyude)
Fixes: 2f015ec6ea ("drm/dp_mst: Add sideband down request tracing + selftests")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-2-Wayne.Lin@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 12d8f31834 upstream.
The handling of the MST Connection Status Notify message is skipped if
the probing of the topology is still pending. Acquiring the
drm_dp_mst_topology_mgr::probe_lock for this in
drm_dp_mst_handle_up_req() is problematic: the task/work this function
is called from is also responsible for handling MST down-request replies
(in drm_dp_mst_handle_down_rep()). Thus drm_dp_mst_link_probe_work() -
holding already probe_lock - could be blocked waiting for an MST
down-request reply while drm_dp_mst_handle_up_req() is waiting for
probe_lock while processing a CSN message. This leads to the probe
work's down-request message timing out.
A scenario similar to the above leading to a down-request timeout is
handling a CSN message in drm_dp_mst_handle_conn_stat(), holding the
probe_lock and sending down-request messages while a second CSN message
sent by the sink subsequently is handled by drm_dp_mst_handle_up_req().
Fix the above by moving the logic to skip the CSN handling to
drm_dp_mst_process_up_req(). This function is called from a work
(separate from the task/work handling new up/down messages), already
holding probe_lock. This solves the above timeout issue, since handling
of down-request replies won't be blocked by probe_lock.
Fixes: ddf983488c ("drm/dp_mst: Skip CSN if topology probing is not done yet")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org # v6.6+
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307183152.3822170-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6daaae5ff7 ]
If the hotplug detect of a display is low for longer than one second
(configurable through drm_dp_cec_unregister_delay), then the CEC adapter
is unregistered since we assume the display was disconnected. If the
HPD went low for less than one second, then we check if the properties
of the CEC adapter have changed, since that indicates that we actually
switch to new hardware and we have to unregister the old CEC device and
register a new one.
Unfortunately, the test for changed properties was written poorly, and
after a new CEC capability was added to the CEC core code the test always
returned true (i.e. the properties had changed).
As a result the CEC device was unregistered and re-registered for every
HPD toggle. If the CEC remote controller integration was also enabled
(CONFIG_MEDIA_CEC_RC was set), then the corresponding input device was
also unregistered and re-registered. As a result the input device in
/sys would keep incrementing its number, e.g.:
/sys/devices/pci0000:00/0000:00:08.1/0000:e7:00.0/rc/rc0/input20
Since short HPD toggles are common, the number could over time get into
the thousands.
While not a serious issue (i.e. nothing crashes), it is not intended
to work that way.
This patch changes the test so that it only checks for the single CEC
capability that can actually change, and it ignores any other
capabilities, so this is now safe as well if new caps are added in
the future.
With the changed test the bit under #ifndef CONFIG_MEDIA_CEC_RC can be
dropped as well, so that's a nice cleanup.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Farblos <farblos@vodafonemail.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 2c6d1fffa1 ("drm: add support for DisplayPort CEC-Tunneling-over-AUX")
Tested-by: Farblos <farblos@vodafonemail.de>
Link: https://patchwork.freedesktop.org/patch/msgid/361bb03d-1691-4e23-84da-0861ead5dbdc@xs4all.nl
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d34357743b ]
Our infoframe setting code currently lacks the ability to clear
infoframes. For some of the infoframes, we only need to replace them,
so if an error occurred when generating a new infoframe we would leave
a stale frame instead of clearing the frame.
However, the Dynamic Range and Mastering (DRM) infoframe should only
be present when displaying HDR content (ie: the HDR_OUTPUT_METADATA blob
is set). If we can't clear infoframes, the stale DRM infoframe will
remain and we can never set the display back to SDR mode.
With this change, we clear infoframes when they can not, or should not,
be generated. This fixes switching to an SDR mode from an HDR one.
Fixes: f378b77227 ("drm/connector: hdmi: Add Infoframes generation")
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202181939.724011-1-derek.foreman@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e54b00086f ]
While receiving an MST up request message from one thread in
drm_dp_mst_handle_up_req(), the MST topology could be removed from
another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing
mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL.
This could lead to a NULL deref/use-after-free of mst_primary in
drm_dp_mst_handle_up_req().
Avoid the above by holding a reference for mst_primary in
drm_dp_mst_handle_up_req() while it's used.
v2: Fix kfreeing the request if getting an mst_primary reference fails.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204132007.3132494-1-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a500f3751d ]
GCC 15 enables -Werror=unterminated-string-initialization by default.
This results in the following build error
drivers/gpu/drm/display/drm_dp_dual_mode_helper.c: In function ‘is_hdmi_adaptor’:
drivers/gpu/drm/display/drm_dp_dual_mode_helper.c:164:17: error: initializer-string for array of
‘char’ is too long [-Werror=unterminated-string-initialization]
164 | "DP-HDMI ADAPTOR\x04";
| ^~~~~~~~~~~~~~~~~~~~~
After discussion with Ville, the fix was to increase the size of
dp_dual_mode_hdmi_id array by one, so that it can accommodate the NULL
line character. This should let us build the kernel with GCC 15.
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002092311.942822-1-brahmajit.xyz@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a6fa67d26d upstream.
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bb ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd2fccac61 upstream.
Fix the MST sideband message body length check, which must be at least 1
byte accounting for the message body CRC (aka message data CRC) at the
end of the message.
This fixes a case where an MST branch device returns a header with a
correct header CRC (indicating a correctly received body length), with
the body length being incorrectly set to 0. This will later lead to a
memory corruption in drm_dp_sideband_append_payload() and the following
errors in dmesg:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25
index -1 is out of range for type 'u8 [48]'
Call Trace:
drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256)
Call Trace:
drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
Cc: <stable@vger.kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241125205314.1725887-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The largest infoframe we create is the DRM (Dynamic Range Mastering)
infoframe which is 26 bytes + a 4 byte header, for a total of 30
bytes.
With HDMI_MAX_INFOFRAME_SIZE set to 29 bytes, as it is now, we
allocate too little space to pack a DRM infoframe in
write_device_infoframe(), leading to an ENOSPC return from
hdmi_infoframe_pack(), and never calling the connector's
write_infoframe() vfunc.
Instead of having HDMI_MAX_INFOFRAME_SIZE defined in two places,
replace HDMI_MAX_INFOFRAME_SIZE with HDMI_INFOFRAME_SIZE(MAX) and make
MAX 27 bytes - which is defined by the HDMI specification to be the
largest infoframe payload.
Fixes: f378b77227 ("drm/connector: hdmi: Add Infoframes generation")
Fixes: c602e4959a ("drm/connector: hdmi: Create Infoframe DebugFS entries")
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827163918.48160-1-derek.foreman@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Thomas needs 5a498d4d06 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Kconfig symbols should not declare dependency on DRM_DISPLAY_HELPER.
Move all parts of DRM_DISPLAY_HELPER to an if DRM_DISPLAY_HELPER block.
It is not possible to make those symbols select DRM_DISPLAY_HELPER
because of the link issues when a part of the helper is selected to be
built-in, while other part is selected to be as module. In such a case
the modular part doesn't get built at all, leading to undefined symbols.
The only viable alternative is to split drm_display_helper.ko into
several small modules, each of them having their own dependencies.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-1-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the
if (old_ddps != port->ddps || !created)
if (port->ddps && !port->input)
ret = drm_dp_send_enum_path_resources();
sequence the first if's condition is true if the port exists already
(!created) or the port was created anew (hence old_ddps==0) and it was
in the plugged state (port->ddps==1). The second if's condition is true
for output ports in the plugged state. So the function is called for an
output port in the plugged state, regardless if it already existed or
not and regardless of the old plugged state. In all other cases
port->full_pbn can be zeroed as the port is either an input for which
full_pbn is never set, or an output in the unplugged state for which
full_pbn was already zeroed previously or the port was just created
(with port->full_pbn==0).
Simplify the condition, making it clear that the path resources are
always enumerated for an output port in the plugged state.
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-4-imre.deak@intel.com
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
Add helpers to convert between q4 fixed point and integer/fraction
values. Also add the format/argument macros required to printk q4 fixed
point variables. The q4 notation is based on the short variant described
by
https://en.wikipedia.org/wiki/Q_(number_format)
where only the number of fraction bits in the fixed point value are
defined, while the full size is deducted from the container type, that
is the size of int for these helpers. Using the fxp_ prefix, which makes
moving these helpers outside of drm to a more generic place easier, if
they prove to be useful.
These are needed by later patches dumping the Display Stream Compression
configuration in DRM core and in the i915 driver to replace the
corresponding bpp_x16 helpers defined locally in the driver.
v2: Use the more generic/descriptive fxp_q4 prefix instead of drm_x16.
(Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-2-imre.deak@intel.com
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most of the HDMI controllers have an upper TMDS character rate limit
they can't exceed. On "embedded"-grade display controllers, it will
typically be lower than what high-grade monitors can provide these days,
so drivers will filter the TMDS character rate based on the controller
capabilities.
To make that easier to handle for drivers, let's provide an optional
hook to be implemented by drivers so they can tell the HDMI controller
helpers if a given TMDS character rate is reachable for them or not.
This will then be useful to figure out the best format and bpc count for
a given mode.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-13-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
