- Setup replay config on device init.
- Enable replay if feature is enabled (prioritize replay over PSR, since
it can be enabled in more usecases)
- Add debug masks to enable replay on supported ASICs
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Improve power saving feature
- Clean up for code clarity
- Fix crashing bug
- Fix pipe allocation for older ASIC
- Fix for gamut remap
- Fix 8K 60Hz display in test cases
- Fix bug in clock gating
- Improve DP2 compliance
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a lack of encapsulation of pipe connection representation in pipe context.
This has caused many challenging bugs and coding errors with repeated
logic to identify the same pipe type.
[how]
Formally define pipe types and provide getters to identify a pipe type and
find a pipe based on specific requirements. Update existing logic in non dcn
specific files and dcn32 and future versions to use the new accessors.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
8k60hz compliace test failing because we restrict it single memory
channels. Workaround by not restricting it on single displays.
[How]
Adding an additional check to DCN314 to restrict 8k60hz mode if it has
more than 1 display connected.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a recent work for developing a new pipe resource allocation
policy used for new ASIC. The new code change needs to modify asic
independent pipe resource allocation flow and hook up the new allocation
policy in asic dependent layer. Unfortunately this change revealed a
hidden bug in the old pipe resource allocation sequence used for older
asics. In the older version of acquiring pipe for layer, we are always
assigning otg master's opp and tg to the newly allocated secondary dpp
pipe. This logic is incorrect when the secodnary dpp
pipe is connected to a secondary opp head pipe in ODM combine
configuration. Before the recent change, we will overwrite this wrong
assignement in asic independent layer again. This covers up the issue.
With the recent change, we will no longer cover up this in upper layer
and therefore causes wrong tg and opp assignement to the secondary
dpp pipe connected to a secondary opp head.
[how]
Always assign tg and opp from its own opp head instead of otg master.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
If surface format is dynamically changed within app without changing
timing / whole plane, we don't reprogram gamut remap matrix.
Issue example:
Linear FP16 scRGB going to PQ+BT.2020 monitor.
Remap = scRGB->BT.2020
App switches swapchain format to 10-bit PQ+BT.2020.
SW calculates correctly that new Remap = bypass (in=-out=BT.2020).
But update not applied in HW.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Certain retimer requires workarounds in order to correctly output test patterns.
[HOW]
Add vendor-specific aux sequences to program retimer's TX and pattern generator
when specific compliance test patterns are requested by sink.
Note: SQ128 w/a in DPMF mode only works in one flip orientation currently
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These functions don't use kernel-doc notation for comments so
don't begin each comment block with the "/**" kernel-doc marker.
This prevents a bunch of kernel-doc warnings:
dmub_replay.c:37: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
dmub_replay.c:37: warning: missing initial short description on line:
* Get Replay state from firmware.
dmub_replay.c:66: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
dmub_replay.c:66: warning: missing initial short description on line:
* Enable/Disable Replay.
dmub_replay.c:116: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
dmub_replay.c:116: warning: missing initial short description on line:
* Set REPLAY power optimization flags.
dmub_replay.c:134: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
dmub_replay.c:134: warning: missing initial short description on line:
* Setup Replay by programming phy registers and sending replay hw context values to firmware.
and 10 more similar warnings.
Fixes: c7ddc0a800 ("drm/amd/display: Add Functions to enable Freesync Panel Replay")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202308081459.US5rLYAY-lkp@intel.com
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add checks for Cursor update and dirty rects (sending updates to dmub)
- Add checks for dc_notify_vsync, and fbc and subvp
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to make sure that the panel supports replay.
This info is inside the amd vsdb (vendor specific data block). Create a
function to parse the block and read the replay_mode bit.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: spaces required around that '?' (ctx:VxE)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: else should follow close brace '}'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: else should follow close brace '}'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: switch and case should be at the same indent
ERROR: code indent should use tabs where possible
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
ERROR: code indent should use tabs where possible
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
ERROR: code indent should use tabs where possible
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: space required before the open brace '{'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: space required before the open brace '{'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: spaces required around that '=' (ctx:WxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: trailing whitespace
ERROR: else should follow close brace '}'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are many ternary operators, the true or false judgement
of which is unnecessary in C language semantics.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added return value check hpd_enable
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix a regression in blank pixel data caused by coding mistake
- Fix a bug when searching for insert_above_mpcc
- Update add plane to context logic with a new algorithm
- Adjust visual confirm dpp height offset to be 1/240 of v addressable
- Add interface to enable DPIA trace
- Support plane clip with zero recout size
- Blocking invalid 420 modes on HDMI TMDS for DCN31 and DCN314
- Make mpc32 functions available to future DCNs
- Change HDCP update sequence for DM
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
