[WHY & HOW]
Since the backup and restore for plane and stream states has
a significant amount of data to copy, we will change the backup
and restore sequence to only take place during full updates.
We will also move the scratch memory to struct dc instead of dc_state
to avoid needing to allocate large amounts of memory every time
we create a new DC state.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Update planes and stream version 3 separates FULL and FAST updates
to their own sequences. It aims to clean up frequent checks for
update type resulting unnecessary branching in logic flow. It also
adds a new commit minimal transition sequence, which detects the need
for minimal transition based on the actual comparison of current and
new states instead of "predicting" it based on per feature software
policy, i.e. could_mpcc_tree_change_for_active_pipes.
The new commit minimal transition sequence is made universal to any
power saving features that would use extra free pipes such as Dynamic
ODM/MPC Combine, MPO or SubVp. Therefore there is no longer a need to
specially handle compatibility problems with transitions among those
features as they are now transparent to the new sequence.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
This commit just adds some simple comments to help understand the
calculation of V total duration for Freesync. Also, remove a legacy TODO
comment from link service type.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
- Update replay residency tracing design to support more types
including tracking PHY and ALPM residency types
- Add commands for Replay frame update count profiling
- Enhance HWFQ with additional flags to allow for more
optimized IPS low power state residencies
- Add new flag to indicate if a new frame update needed for
ABM to ramp up into steady state
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
If DCN is in idle then we should not be accessing DCN registers or
it can lead to hangs.
[HOW]
Log the error and return 0 or drop the write if it's in idle.
This is skipped in the exit sequence itself since the boolean flips
before it starts.
It also does not cover accesses from external clients outside of DM/DC
like firmware or the kernel mode driver.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes index out of bounds issue in the color transformation function.
The issue could occur when the index 'i' exceeds the number of transfer
function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, an error message is
logged and the function returns false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Fixes: b629596072 ("drm/amd/display: Build unity lut for shaper")
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Cc: Charlene Liu <Charlene.Liu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to support low hz case, but the original
vtotal/vtotal_min/vtotal_max can't support more
than 0x7FFF.
[HOW]
We use the 2 HW reg to contorl long vblank case.
1. OTG_V_COUNT_STOP_CONTROL -> vcount_stop
2. OTG_V_COUNT_STOP_CONTROL2 -> vcount_stop_timer
vcount_stop define from which line we stop using vcount
and start using vcount2.
vcount_stop_timer define how long we use vcount2.
Ex:
Vtotal = 7
OTG_V_COUNT_STOP_CONTROL = 4
OTG_V_COUNT_STOP_CONTROL2 = 5
time : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
vcount : 0, 1, 2, 3, - - - - - 4, 5, 6
vcount2 : 0, 1, 2, 3, 4,
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Robin Chen<robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Change default size for dummy plane in DML2
- Enable DML2 debug flags
- Add some forward declarations
- Add DML2 folder to include path
- Set DCN351 BB and IP the same as DCN35
- Override min required DCFCLK in dml1_validate
- Fix function banner for amdgpu_dm_psr_disable_all()
- Allow dirty rects to be sent to dmub when abm is active
- Add debug key to allow disabling dtbclk
- Add debug prints for IPS testing
- Exit idle optimizations before HDCP execution
- Add entry and exit counters
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To log commit states and when we transition in/out of allow and idle
states and the caller.
[HOW]
Add a new logging helper and wrap idle optimization calls to receive
the caller.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[HOW]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
PSP can access DCN registers during command submission and we need
to ensure that DCN is not in PG before doing so.
[HOW]
Add a callback to DM to lock and notify DC for idle optimization exit.
It can't be DC directly because of a potential race condition with the
link protection thread and the rest of DM operation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Odm update is doubled buffered. We need to wait for ODM update to be
completed before optimizing bandwidth or programming new udpates.
[HOW]
implement wait_for_odm_update_pending_complete function to wait for:
1. odm configuration update is no longer pending in timing generator.
2. no pending dpg pattern update for each active OPP.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On DCN32 we support dynamic ODM even when OTG is blanked. When ODM
configuration is dynamically changed and the OTG is on blank pattern,
we will need to reprogram OPP's test pattern based on new ODM
configuration. Therefore we need to lock the OTG pipe to avoid temporary
corruption when we are reprogramming OPP blank patterns.
[HOW]
Add a new interdependent update lock implementation to lock all enabled
OTG pipes even when there is no plane on the OTG for DCN32.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When committing an update with ODM combine change when the plane is
removing or already removed, we fail to detect odm change in pipe
update flags. This has caused mismatch between new dc state and the
actual hardware state, because we missed odm programming.
[HOW]
- Detect odm change even for otg master pipe without a plane.
- Update odm config before calling program pipes for pipe with planes.
The commit also updates blank pattern programming when odm is changed
without plane. This is because number of OPP is changed when ODM
combine is changed. Blank pattern is per OPP so we will need to
reprogram OPP based on the new pipe topology.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For linux-next repository.
./drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h:1: warning: no structured comments found
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:1: warning: no structured comments found
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:162: warning: Function parameter or struct member 'pre_multiplied_alpha' not described in 'mpcc_blnd_cfg'
Signed-off-by: R SUNDAR <prosunofficial@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds a check in the map_hw_resources function to prevent a potential
buffer overflow. The function was accessing arrays using an index that
could potentially be greater than the size of the arrays, leading to a
buffer overflow.
Adds a check to ensure that the index is within the bounds of the
arrays. If the index is out of bounds, an error message is printed and
break it will continue execution with just ignoring extra data early to
prevent the buffer overflow.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7
Fixes: 7966f319c6 ("drm/amd/display: Introduce DML2")
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
