Place it in drm_property where drm_property_replace_blob and
drm_property_lookup_blob live. Then we can use the DRM helper for
driver-specific KMS properties too.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Atomic modesetting code lacked support for specifying mouse cursor
hotspots. The legacy kms DRM_IOCTL_MODE_CURSOR2 had support for setting
the hotspot but the functionality was not implemented in the new atomic
paths.
Due to the lack of hotspots in the atomic paths userspace compositors
completely disable atomic modesetting for drivers that require it (i.e.
all paravirtualized drivers).
This change adds hotspot properties to the atomic codepaths throughtout
the DRM core and will allow enabling atomic modesetting for virtualized
drivers in the userspace.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023074613.41327-3-aesteve@redhat.com
If the driver supports it, allow user-space to supply the
DRM_MODE_PAGE_FLIP_ASYNC flag to request an async page-flip.
Set drm_crtc_state.async_flip accordingly.
Document that drivers will reject atomic commits if an async
flip isn't possible. This allows user-space to fall back to
something else. For instance, Xorg falls back to a blit.
Another option is to wait as close to the next vblank as
possible before performing the page-flip to reduce latency.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Co-developed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122161941.320564-3-andrealmeid@igalia.com
The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.
Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.
Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.
We'll then be able to phase out the older tv mode property.
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-5-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
There is two TV subconnector related properties registered by
drm_mode_create_tv_properties(): subconnector and select subconnector.
While the select subconnector property is stored in the kernel by the
drm_tv_connector_state structure, the subconnector property isn't stored
anywhere.
Worse, the select subconnector property is stored in a field called
subconnector, creating some ambiguity about which property content we're
accessing.
Let's rename that field to one called select_subconnector to make it move
obvious what it's about.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-5-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
drm_gem_plane_helper_prepare_fb() was using
drm_atomic_set_fence_for_plane() which ignores all implicit fences when an
explicit fence is already set. That's rather unfortunate when the fb still
has a kernel fence we need to wait for to avoid presenting garbage on the
screen.
So instead update the fence in the plane state directly. While at it also
take care of all potential GEM objects and not just the first one.
Also remove the now unused drm_atomic_set_fence_for_plane() function, new
drivers should probably use the atomic helpers directly.
v2: improve kerneldoc, use local variable and num_planes, WARN_ON_ONCE
on missing planes.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429134230.24334-1-christian.koenig@amd.com
The DRM_UT_STATE controls whether we're calling
drm_atomic_print_new_state() whenever a new state is committed. However,
that call is made in the drm_mode_atomic_ioctl(), whereas we have
multiple users of the drm_atomic_commit() function in the kernel
(framebuffer emulation, drm_atomic_helper_dirtyfb, etc.).
This leads to multiple states being committed but never actually
displayed even though we asked to have verbose atomic state debugging.
Let's move the call to drm_atomic_print_new_state() to
drm_atomic_commit() to make sure we don't miss any. Non-blocking commits
were never logged though, and it would create too much churn in the logs
to do so, so leave them out for now.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220328124304.2309418-2-maxime@cerno.tech
Add support for generic electronic privacy screen properties, that
can be added by systems that have an integrated EPS.
Changes in v2 (Hans de Goede)
- Create 2 properties, "privacy-screen sw-state" and
"privacy-screen hw-state", to deal with devices where the OS might be
locked out of making state changes
- Write kerneldoc explaining how the 2 properties work together, what
happens when changes to the state are made outside of the DRM code's
control, etc.
Changes in v3 (Hans de Goede)
- Some small tweaks to the kerneldoc describing the 2 properties
Changes in v4 (Hans de Goede)
- Change the "Enabled, locked" and "Disabled, locked" hw-state enum value
names to "Enabled-locked" and "Disabled-locked". The xrandr command shows
all possible enum values separated by commas in its output, so having a
comma in an enum name is not a good idea.
- Do not add a privacy_screen_hw_state member to drm_connector_state
since this property is immutable its value must be directly stored in the
obj->properties->values array
Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-2-hdegoede@redhat.com
* devcoredump support for display errors
* dpu: irq cleanup/refactor
* dpu: dt bindings conversion to yaml
* dsi: dt bindings conversion to yaml
* mdp5: alpha/blend_mode/zpos support
* a6xx: cached coherent buffer support
* a660 support
* gpu iova fault improvements:
- info about which block triggered the fault, etc
- generation of gpu devcoredump on fault
* assortment of other cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs4=qsGBBbyn-4JWqW4-YUSTKh67X3DsPQ=T2D9aXKqNA@mail.gmail.com
Introduce per-plane and per-CRTC scaling filter properties to allow
userspace to select the driver's default scaling filter or
Nearest-neighbor(NN) filter for upscaling operations on CRTC and
plane.
Drivers can set up this property for a plane by calling
drm_plane_create_scaling_filter() and for a CRTC by calling
drm_crtc_create_scaling_filter().
NN filter works by filling in the missing color values in the upscaled
image with that of the coordinate-mapped nearest source pixel value.
NN filter for integer multiple scaling can be particularly useful for
for pixel art games that rely on sharp, blocky images to deliver their
distinctive look.
changes since: v6:
* Move property doc to existing "Standard CRTC Properties" and
"Plane Composition Properties" doc comments (Simon)
changes since v3:
* Refactor code, add new function for common code (Ville)
changes since v2:
* Create per-plane and per-CRTC scaling filter property (Ville)
changes since v1:
* None
changes since RFC:
* Add separate properties for plane and CRTC (Ville)
Link: https://github.com/xbmc/xbmc/pull/18194
Link: https://github.com/xbmc/xbmc/pull/18567
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161427.6941-2-pankaj.laxminarayan.bharadiya@intel.com
We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This patch adds a DRM ENUM property to the selected connectors.
This property is used for mentioning the protected content's type
from userspace to kernel HDCP authentication.
Type of the stream is decided by the protected content providers.
Type 0 content can be rendered on any HDCP protected display wires.
But Type 1 content can be rendered only on HDCP2.2 protected paths.
So when a userspace sets this property to Type 1 and starts the HDCP
enable, kernel will honour it only if HDCP2.2 authentication is through
for type 1. Else HDCP enable will be failed.
Pekka have completed the Weston DRM-backend review in
https://gitlab.freedesktop.org/wayland/weston/merge_requests/48
and the UAPI for HDCP 2.2 looks good.
The userspace is accepted in Weston.
v2:
cp_content_type is replaced with content_protection_type [daniel]
check at atomic_set_property is removed [Maarten]
v3:
%s/content_protection_type/hdcp_content_type [Pekka]
v4:
property is created for the first requested connector and then reused.
[Danvet]
v5:
kernel doc nits addressed [Daniel]
Rebased as part of patch reordering.
v6:
Kernel docs are modified [pekka]
v7:
More details in Kernel docs. [pekka]
v8:
Few more clarification into kernel doc of content type [pekka]
v9:
Small fixes in coding style.
v10:
Moving DRM_MODE_HDCP_CONTENT_TYPEx definition to drm_hdcp.h [pekka]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/320957/?series=57232&rev=14
Features:
- Engine discovery query (Tvrtko)
- Support for DP YCbCr4:2:0 outputs (Gwan-gyeong)
- HDCP revocation support, refactoring (Ramalingam)
- Remove DRM_AUTH from IOCTLs which also have DRM_RENDER_ALLOW (Christian König)
- Asynchronous display power disabling (Imre)
- Perma-pin uC firmware and re-enable global reset (Fernando)
- GTT remapping for display, for bigger fb size and stride (Ville)
- Enable pipe HDR mode on ICL if only HDR planes are used (Ville)
- Kconfig to tweak the busyspin durations for i915_wait_request (Chris)
- Allow multiple user handles to the same VM (Chris)
- GT/GEM runtime pm improvements using wakerefs (Chris)
- Gen 4&5 render context support (Chris)
- Allow userspace to clone contexts on creation (Chris)
- SINGLE_TIMELINE flags for context creation (Chris)
- Allow specification of parallel execbuf (Chris)
Refactoring:
- Header refactoring (Jani)
- Move GraphicsTechnology files under gt/ (Chris)
- Sideband code refactoring (Chris)
Fixes:
- ICL DSI state readout and checker fixes (Vandita)
- GLK DSI picture corruption fix (Stanislav)
- HDMI deep color fixes (Clinton, Aditya)
- Fix driver unbinding from a device in use (Janusz)
- Fix clock gating with pipe scaling (Radhakrishna)
- Disable broken FBC on GLK (Daniel Drake)
- Miscellaneous GuC fixes (Michal)
- Fix MG PHY DP register programming (Imre)
- Add missing combo PHY lane power setup (Imre)
- Workarounds for early ICL VBT issues (Imre)
- Fix fastset vs. pfit on/off on HSW EDP transcoder (Ville)
- Add readout and state check for pch_pfit.force_thru (Ville)
- Miscellaneous display fixes and refactoring (Ville)
- Display workaround fixes (Ville)
- Enable audio even if ELD is bogus (Ville)
- Fix use-after-free in reporting create.size (Chris)
- Sideband fixes to avoid BYT hard lockups (Chris)
- Workaround fixes and improvements (Chris)
Maintainer shortcomings:
- Failure to adequately describe and give credit for all changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgt3n45z.fsf@intel.com
This patch adds a blob property to get HDR metadata
information from userspace. This will be send as part
of AVI Infoframe to panel.
It also implements get() and set() functions for HDR output
metadata property.The blob data is received from userspace and
saved in connector state, the same is returned as blob in get
property call to userspace.
v2: Rebase and modified the metadata structure elements
as per Ville's POC changes.
v3: No Change
v4: Addressed Shashank's review comments
v5: Rebase.
v6: Addressed Brian Starkey's review comments, defined
new structure with header for dynamic metadata scalability.
Merge get/set property functions for metadata in this patch.
v7: Addressed Jonas Karlman review comments and defined separate
structure for infoframe to better align with CTA 861.G spec. Added
Shashank's RB.
v8: Addressed Ville's review comments. Moved sink metadata structure
out of uapi headers as suggested by Jonas Karlman.
v9: Rebase and addressed Jonas Karlman review comments.
v10: Addressed Ville's review comments, dropped the metdata_changed
state variable as its not needed anymore.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-2-git-send-email-uma.shankar@intel.com
With the previous patch drm_crtc_find will return NULL when the crtc
isn't in our lease, which will then disable the plane/connector. No
longer an issue since the lessor can't escape their lease terms
anymore, but not quite great semantics yet either.
Catch this and return -EACCES, so that at least evil test cases have a
better chance of making sure the kernel works correctly.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-8-daniel.vetter@ffwll.ch
drm-misc-next for 5.2:
UAPI Changes:
- Add Colorspace connector property (Uma)
- fourcc: Several new YUV formats from ARM (Brian & Ayan)
- fourcc: Fix merge conflicts between new formats above and Swati's that
went in via topic/hdr-formats-2019-03-07 branch (Maarten)
Cross-subsystem Changes:
- Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel)
Core Changes:
- Improve component helper documentation (Daniel)
- Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf)
- Add device managed (devm) drm_device init function (Noralf)
- Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf)
- Move MIPI/DSI rate control params computation into core from i915 (David)
- Add support for shmem backed gem objects (Noralf)
Driver Changes:
- various: Use of_node_name_eq for node name comparisons (Rob Herring)
- sun4i: Add DSI burst mode support (Konstantin)
- panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin)
- virtio: A few prime improvements (Gerd)
- tinydrm: Remove tinydrm_device (Noralf)
- vc4: Add load tracker to driver to detect underflow in atomic check (Boris)
- vboxvideo: Move it out of staging \o/ (Hans)
- v3d: Add support for V3D v4.2 (Eric)
Cc: Konstantin Sudakov <k.sudakov@integrasources.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Ayan Kumar Halder <ayan.halder@arm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321170805.GA50145@art_vandelay
As writeback jobs contain a framebuffer, drivers may need to prepare and
cleanup them the same way they can prepare and cleanup framebuffers for
planes. Add two new optional connector helper operations,
.prepare_writeback_job() and .cleanup_writeback_job() to support this.
The job prepare operation is called from
drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper
that would need to be called by all drivers not using
drm_atomic_helper_commit(). The job cleanup operation is called from the
existing drm_writeback_cleanup_job() function, invoked both when
destroying the job as part of a aborted commit, or when the job
completes.
The drm_writeback_job structure is extended with a priv field to let
drivers store per-job data, such as mappings related to the writeback
framebuffer.
For internal plumbing reasons the drm_writeback_job structure needs to
store a back-pointer to the drm_writeback_connector. To avoid pushing
too much writeback-specific knowledge to drm_atomic_uapi.c, create a
drm_writeback_set_fb() function, move the writeback job setup code
there, and set the connector backpointer. The prepare_signaling()
function doesn't need to allocate writeback jobs and can ignore
connectors without a job, as it is called after the writeback jobs are
allocated to store framebuffers, and a writeback fence with a
framebuffer is an invalid configuration that gets rejected by the commit
check.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
