Starting on Xe2, the GSCCS engine reset is a 2-step process. When the
driver or the GuC hits the GDRST register, the CS is immediately reset
and a success is reported, but the GSC shim continues its reset in the
background. While the shim reset is ongoing, the CS is able to accept
new context submission, but any commands that require the shim will
be stalled until the reset is completed. This means that we can keep
submitting to the GSCCS as long as we make sure that the preemption
timeout is big enough to cover any delay introduced by the reset; since
the GSC preempt timeout is not tunable at runtime, we only need to check
that the value set in kconfig is big enough (and increase it if it
isn't).
When the shim reset completes, a specific CS interrupt is triggered,
in response to which we need to check the GSCI_TIMER_STATUS register
to see if the reset was successful or not.
Note that the GSCI_TIMER_STATUS register is not power save/restored,
so it gets reset on MC6 entry. However, a reset failure stops MC6,
so in that scenario we're always guaranteed to find the correct value.
Since we can't check the register within interrupt context, the
existing GSC worker has been updated to handle it.
The expected action to take on ER failure is to trigger a driver FLR,
but we still don't support that, so for now we just print an error. A
comment has been added to the code to keep track of the FLR requirement.
v2: Add a check for the initial timeout value (Alan)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304145634.820684-1-daniele.ceraolospurio@intel.com
The GSC notifies us of a proxy request via the HECI2 interrupt. The
interrupt must be enabled both in the HECI layer and in our usual gt irq
programming; for the latter, the interrupt is enabled via the same enable
register as the GSC CS, but it does have its own mask register. When the
interrupt is received, we also need to de-assert it in both layers.
The handling of the proxy request is deferred to the same worker that we
use for GSC load. New flags have been added to distinguish between the
init case and the proxy interrupt.
v2: rename irq define, fix include ordering (Alan)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117182621.2653049-3-daniele.ceraolospurio@intel.com
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there.
We do this by recompiling i915/display code twice.
Now that i915 has been adapted to support the Xe build, we can add
the xe/display support.
This initial work is a collaboration of many people and unfortunately
this squashed patch won't fully honor the proper credits.
But let's try to add a few from the squashed patches:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Starting with Xe_LP+, GFX_MSTR_IRQ contains status bits that have W1C
behavior. If we do not properly reset them, we would miss delivery of
interrupts if a pending bit is set when enabling IRQs.
As an example, the display part of our probe routine contains paths
where we wait for vblank interrupts. If a display interrupt was already
pending when enabling IRQs, we would time out waiting for the vblank.
That in fact happened recently when modprobing Xe on a Lunar Lake with a
specific configuration; and that's how we found out we were missing this
step in the IRQ enabling logic.
Fix the issue by clearing GFX_MSTR_IRQ as part of the IRQ reset.
v2:
- Make resetting GFX_MSTR_IRQ be the last step to avoid bit
re-latching. (Ville)
v3:
- Swap nesting order: guard loop with the IP version check instead of
doing the check at each iteration. (Lucas)
v4:
- Add braces for the "if" statement guarding the loop to make the
compiler happy. (Gustavo)
BSpec: 50875, 54028, 62357
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230926221914.106843-2-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As a preparation for msix support, changing for new msi irq api
which supports both msi and msix.
Reviewed-by: Ohad Sharabi <osharabi@habana.ai>
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rebase fixes by Rodrigo]
The guc_submission_enabled() function is being used as a boolean toggle
for all firmwares and all related features, not just GuC submission. We
could add additional flags/functions to distinguish and allow different
use-cases (e.g. loading HuC but not using GuC submission), but given
that not using GuC is a debug-only scenario having a global switch for
all FWs is enough. However, we want to make it clear that this switch
turns off everything, so rename it to uc_enabled().
v2: rebase on s/XE_WARN_ON/xe_assert
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are a set of engine group busyness counters provided by HW which are
perfect fit to be exposed via PMU perf events.
BSPEC: 46559, 46560, 46722, 46729, 52071, 71028
events can be listed using:
perf list
xe_0000_03_00.0/any-engine-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/copy-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/interrupts/ [Kernel PMU event]
xe_0000_03_00.0/media-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/render-group-busy-gt0/ [Kernel PMU event]
and can be read using:
perf stat -e "xe_0000_8c_00.0/render-group-busy-gt0/" -I 1000
time counts unit events
1.001139062 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
2.003294678 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
3.005199582 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
4.007076497 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
5.008553068 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
6.010531563 43520 ns xe_0000_8c_00.0/render-group-busy-gt0/
7.012468029 44800 ns xe_0000_8c_00.0/render-group-busy-gt0/
8.013463515 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
9.015300183 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.017233010 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.971934120 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
The pmu base implementation is taken from i915.
v2:
Store last known value when device is awake return that while the GT is
suspended and then update the driver copy when read during awake.
v3:
1. drop init_samples, as storing counters before going to suspend should
be sufficient.
2. ported the "drm/i915/pmu: Make PMU sample array two-dimensional" and
dropped helpers to store and read samples.
3. use xe_device_mem_access_get_if_ongoing to check if device is active
before reading the OA registers.
4. dropped format attr as no longer needed
5. introduce xe_pmu_suspend to call engine_group_busyness_store
6. few other nits.
v4: minor nits.
v5: take forcewake when accessing the OAG registers
v6:
1. drop engine_busyness_sample_type
2. update UAPI documentation
v7:
1. update UAPI documentation
2. drop MEDIA_GT specific change for media busyness counter.
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Co-developed-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We cannot have spin locks around xe_irq_reset, since it will
call the intel_display_power_is_enabled() function, and
that needs a mutex lock. Hence causing the undesired
"[ BUG: Invalid wait context ]"
We cannot convert i915's power domain lock to spin lock
due to the nested dependency of non-atomic context waits.
So, let's move the xe_irq_reset functions from the
critical area, while still ensuring that we are protecting
the irq.enabled and ensuring the right serialization
in the irq handlers.
v2: On the first version, I had missed the fact that
irq.enabled is checked on the xe/display glue layer,
and that i915 display code is actually using the irq
spin lock properly. So, this got changed to a version
suggested by Matthew Auld.
v3: do not use lockdep_assert for display glue.
do not save restore irq from inside IRQ or we can
get bogus irq restore warnings
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/463
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reduce the number of warnings reported by checkpatch.pl from 118 to 48 by
addressing those warnings types:
LEADING_SPACE
LINE_SPACING
BRACES
TRAILING_SEMICOLON
CONSTANT_COMPARISON
BLOCK_COMMENT_STYLE
RETURN_VOID
ONE_SEMICOLON
SUSPECT_CODE_INDENT
LINE_CONTINUATIONS
UNNECESSARY_ELSE
UNSPECIFIED_INT
UNNECESSARY_INT
MISORDERED_TYPE
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The majority of xe_gt_irq_postinstall() is really focused on the
hardware engine interrupts; other GT-related interrupts such as the GuC
are enabled/disabled independently. Renaming the function and making it
truly GT-specific will make it more clear what the intended focus is.
Disabling/masking of other interrupts (such as GuC interrupts) is
unnecessary since that has already happened during the irq_reset stage,
and doing so will become harmful once the media GT is re-enabled since
calls to xe_gt_irq_postinstall during media GT initialization would
incorrectly disable the primary GT's GuC interrupts.
Also, since this function is called from gt_fw_domain_init(), it's not
necessary to also call it earlier during xe_irq_postinstall; just
xe_irq_resume to handle runtime resume should be sufficient.
v2:
- Drop unnecessary !gt check. (Lucas)
- Reword some comments about enable/unmask for clarity. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-26-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The xe_irq_postinstall() never actually gets called after installing the
interrupt handler. This oversight seems to get papered over due to the
fact that the (misnamed) xe_gt_irq_postinstall does more than it really
should and gets called in the middle of the GT initialization. The
callstack for postinstall is also a bit muddled with top-level device
interrupt enablement happening within platform-specific functions called
from the per-tile xe_gt_irq_postinstall() function.
Clean this all up by adding the missing call to xe_irq_postinstall()
after installing the interrupt handler and pull top-level irq enablement
up to xe_irq_postinstall where we'd expect it to be.
The xe_gt_irq_postinstall() function is still a bit misnamed here; an
upcoming patch will refocus its purpose and rename it.
v2:
- Squash in patch to actually call xe_irq_postinstall() after
installing the interrupt handler.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-25-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
IRQ delivery and handling needs to be handled on a per-tile basis. Note
that this is true even for the "GT interrupts" relating to engines and
GuCs --- the interrupts relating to both GTs get raised through a single
set of registers in the tile's sgunit range.
On true multi-tile platforms, interrupts on remote tiles are internally
forwarded to the root tile; the first thing the top-level interrupt
handler should do is consult the root tile's instance of
DG1_MSTR_TILE_INTR to determine which tile(s) had interrupts. This
register is also responsible for enabling/disabling top-level reporting
of any interrupts to the OS. Although this register technically exists
on all tiles, it should only be used on the root tile.
The (mis)use of struct xe_gt as a target for MMIO operations in the
driver makes the code somewhat confusing since we wind up needing a GT
pointer to handle programming that's unrelated to the GT. To mitigate
this confusion, all of the xe_gt structures used solely as an MMIO
target in interrupt code are renamed to 'mmio' so that it's clear that
the structure being passed does not necessarily relate to any specific
GT (primary or media) that we might be dealing with interrupts for.
Reworking the driver's MMIO handling to not be dependent on xe_gt is
planned as a future patch series.
Note that GT initialization code currently calls xe_gt_irq_postinstall()
in an attempt to enable the HWE interrupts for the GT being initialized.
Unfortunately xe_gt_irq_postinstall() doesn't really match its name and
does a bunch of other stuff unrelated to the GT interrupts (such as
enabling the top-level device interrupts). That will be addressed in
future patches.
v2:
- Clarify commit message with explanation of why DG1_MSTR_TILE_INTR is
only used on the root tile, even though it's an sgunit register that
is technically present in each tile's MMIO space. (Aravind)
- Also clarify that the xe_gt used as a target for MMIO operations may
or may not relate to the GT we're dealing with for interrupts.
(Lucas)
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-22-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are a bunch of places in the driver where we need to perform
non-GT MMIO against the platform's primary tile (display code, top-level
interrupt enable/disable, driver initialization, etc.). Rename
'to_gt()' to 'xe_primary_mmio_gt()' to clarify that we're trying to get
a primary MMIO handle for these top-level operations.
In the future we need to move away from xe_gt as the target for MMIO
operations (most of which are completely unrelated to GT).
v2:
- s/xe_primary_mmio_gt/xe_root_mmio_gt/ for more consistency with how
we refer to tile 0. (Lucas)
v3:
- Tweak comment on xe_root_mmio_gt(). (Lucas)
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-16-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
These should replace the _MMIO() and MCR_REG() from i915, with the goal
of being more extensible, allowing to pass the additional fields for
struct xe_reg and struct xe_reg_mcr. Replace all uses of _MMIO() and
MCR_REG() in xe.
Since the RTP, reg-save-restore and WA infra are not ready to use the
new type, just undef the macro like was done for the i915 types
previously. That conversion will come later.
v2: Remove MEDIA_SOFT_SCRATCH_COUNT/MEDIA_SOFT_SCRATCH re-added by
mistake (Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-8-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stop using i915 types for registers. Use our own types. Differently from
i915, this will keep under the register definition the knowledge for the
different types of registers. For now, the "flags"/"options" are mcr and
masked, although only the former is being used.
Additionally MCR registers have their own type. The only place that
should really look inside a xe_mcr_reg_t is that code dealing with the
steering and using other APIs when the register is MCR has been a source
of problem in the past.
Most of the driver is agnostic to the register differences since they
either use the definition from the header or already call the correct
MCR_REG()/_MMIO() macros. By embeding the struct xe_reg inside the
struct it's also possible to guarantee the compiler will break if
using RANDOM_MCR_REG.reg is attempted, since now the u32 is inside the
inner struct.
v2:
- Deep a dedicated type for MCR registers to avoid misuse
(Matt Roper, Jani)
- Drop the typedef and just use a struct since it's not an opaque type
(Jani)
- Add more kernel-doc
v3:
- Use only 22 bits for the register address since all the platforms
supported so far have only 4MB of MMIO per tile (Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-7-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although our only multi-tile platform today (PVC) doesn't support
display, it's possible that some future multi-tile platform will.
If/when this happens, display interrupts (both traditional display and
ASLE backlight interrupts raised as a Gunit interrupt) should be
delivered to the primary tile. Save away tile0's master_ctl value so
that it can still be used for display interrupt handling after the GT
loop.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Platforms supported by the Xe driver handle top-level interrupts in one
of two ways:
- Xe_LP platforms only have a "graphics master" register and lack a
"master tile" register, so top-level interrupt detection and
enable/disable happens in the graphics master.
- Xe_LP+ (aka DG1) and beyond have a "master tile" interrupt register
that controls the enable/disable of top-level interrupts and must
also be consulted to determine which tiles have received interrupts
before the driver moves on the process the graphics master register.
For functions that are only relevant to the first set of platforms,
rename the function prefix to Xe_LP since "gen11" doesn't make sense in
the Xe driver. Also add some comments briefly describing the two
top-level handlers.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-6-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For cases where IRQ_INIT and IRQ_RESET are used, the relevant interrupt
registers are always consecutive and ordered ISR, IMR, IIR, IER. Adding
helpers to look these up from a base offset will let us eliminate some
of the CPP pasting and simplify other upcoming patches.
v2:
- s/_REGS/_OFFSET/ for consistency. (Lucas)
- Move IMR/IIR/IER helpers into xe_irq.c; they aren't needed anywhere
else. (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Copy the macros used by xe in i915_reg.h to regs/xe_regs.h. A minimal
cleanup is done while copying so they adhere minimally to the coding
style. Further reordering and cleaning is left for later.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Create regs/xe_gt_regs.h file with all the registers and bit
definitions used by the xe driver. Eventually the registers may be
defined in a different way and since xe doesn't supported below gen12,
the number of registers touched is much smaller, so create a new header.
The definitions themselves are direct copy from the
gt/intel_gt_regs.h file, just sorting the registers by address.
Cleaning those up and adhering to a common coding style is left for
later.
v2: Make the change to MCR_REG location in a separate patch to go
through the i915 branch (Matt Roper / Rodrigo)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sort includes and split them in blocks:
1) .h corresponding to the .c. Example: xe_bb.c should have a "#include
"xe_bb.h" first.
2) #include <linux/...>
3) #include <drm/...>
4) local includes
5) i915 includes
This is accomplished by running
`clang-format --style=file -i --sort-includes drivers/gpu/drm/xe/*.[ch]`
and ignoring all the changes after the includes. There are also some
manual tweaks to split the blocks.
v2: Also sort includes in headers
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A few static functions not being declared like that break the build with
W=1, like e.g.
cc1: all warnings being treated as errors
make[2]: *** [../scripts/Makefile.build:250: drivers/gpu/drm/xe/xe_gt.o] Error 1
../drivers/gpu/drm/xe/xe_guc.c:240:6: error: no previous prototype for ‘guc_write_params’ [-Werror=missing-prototypes]
240 | void guc_write_params(struct xe_guc *guc)
| ^~~~~~~~~~~~~~~~
Make them static.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
At present the interrupts are enabled while initializing the last GT.
But this is incorrect for a Multi-GT platform, as root GT initialization
will fail with interrupt disabled. Interrupts are required for
the GuC submission triggered during initialization.
Enable the interrupt during the root GT initialization.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
