The move of the scan complete notification handling to the wiphy worker
introduced a race between scan complete notification and scan abort:
- The wiphy lock is held, e.g., for rfkill handling etc.
- Scan complete notification is received but not handled yet.
- Scan abort is triggered, and scan abort is sent to the FW. Once the
scan abort command is sent successfully, the flow synchronously waits
for the scan complete notification. However, as the scan complete
notification was already received but not processed yet, this hangs for
a second and continues leaving the scan status in an inconsistent
state.
- Once scan complete handling is started (when the wiphy lock is not held)
since the scan status is not an inconsistent state, a warning is issued
and the scan complete notification is not handled.
To fix this issue, switch back the scan complete notification to be
asynchronously handling, and only move the link selection logic to
a worker (which was the original reason for the move to use wiphy lock).
While at it, refactor some prints to improve debug data.
Fixes: 07bf5297d3 ("wifi: iwlwifi: mvm: Implement new link selection algorithm")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.1f484a86324b.I63ed445a47f144546948c74ae6df85587fdb4ce3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When there's an active link in a non-station vif, the station vif is
not allowed to enter EMLSR
Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule
an exit from EMLSR worker, but the worker cannot run before the
activation of the non-BSS link, as ieee80211_remain_on_channel already
holds the wiphy mutex.
Handle that by explicitly calling ieee80211_set_active_links()
to leave EMLSR, and then doing iwl_mvm_block_esr() only for
consistency and to avoid re-entering it before ready.
Note that a call to ieee80211_set_active_links requires to release the
mvm mutex, but that's ok since we still hold the wiphy lock. The only
thing that might race here is the ESR_MODE_NOTIF, so this changes its
handler to run under the wiphy lock.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replaces the current logic with a new algorithm based on the link
grading introduced in a previous patch.
The new selection algorithm will be invoked upon successful scan to ensure
it has the necessary updated data it needs.
This update delegates the selection logic as the primary link
determiner in EMLSR mode, storing it in mvmvif to avoid repeated
calculations, as the result may vary.
Additionally, includes tests for iwl_mvm_valid_link_pair to validate
link pairs for EMLSR.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.309fb1b3fe44.I5baf0c293c89a5a28bd1a6386bf9ca6d2bf61ab8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For channel contexts, mac80211 currently uses the cfg80211
chandef struct (control channel, center freq(s), width) to
define towards drivers and internally how these behave. In
fact, there are _two_ such structs used, where the min_def
can reduce bandwidth according to the stations connected.
Unfortunately, with EHT this is longer be sufficient, at
least not for all hardware. EHT requires that non-AP STAs
that are connected to an AP with a lower bandwidth than it
(the AP) advertises (e.g. 160 MHz STA connected to 320 MHz
AP) still be able to receive downlink OFDMA and respond to
trigger frames for uplink OFDMA that specify the position
and bandwidth for the non-AP STA relative to the channel
the AP is using. Therefore, they need to be aware of this,
and at least for some hardware (e.g. Intel) this awareness
is in the hardware. As a result, use of the "same" channel
may need to be split over two channel contexts where they
differ by the AP being used.
As a first step, introduce a concept of a channel request
('chanreq') for each interface, to control the context it
requests. This step does nothing but reorganise the code,
so that later the AP's chandef can be added to the request
in order to handle the EHT case described above.
Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The wiphy_work infra ensures that the entire worker will run
with the wiphy mutex. It is useful to have RX handlers
running as a wiphy_work, when we don't want the handler to
run in parallel with mac80211 work (to avoid races).
For example - BT notification can disable eSR starting from the next
patch.
In ieee80211_set_active_links we first check that eSR is
allowed, (drv_can_activate_links) and then activate it.
If the BT notif was received after drv_can_activate_links
(which returned true), and before the activation - eSR will be
activated when it shouldn't.
If BT notif is handled with the wiphy mutex, it can't run in
parallel to ieee80211_set_active_links, which also holds that
mutex.
Add the necessary infrastructure here, for use in the next commit.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240123200528.ce83d16cdec8.I35ef53fa23f58b9ec17924099238b61deafcecd7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's only one user of this code, which is STA unblock
during sleep for uAPSD on really old devices. Instead of
having this all through the API with calls up and down,
just implemented a special-case CMD_BLOCK_TXQS flag for
this, it's only needed in the old gen1 transport.
While at it, fix a complain that lockdep would have, as
we lock the cmd queue and then the TXQs in the reclaim
by using spin_lock_nested(). We no longer need to disable
BHs in iwl_trans_pcie_block_txq_ptrs() since it's called
with them disabled already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.2bd95e0570fc.I16486dbc82570d2f73a585872f5394698627310d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
set_antenna() is supported only when the device is not started in
mac80211 which translates to the firmware not being loaded in iwlwifi.
The tricky part is that iwlwifi populates the sband data during its boot
and doesn't touch this data afterwards, but if the antenna settings
forbid MIMO, we need to update the sband data.
Rework the nvm parsing code to allow to get an existing nvm_data and
modify the sband with additional constraints (tx / rx chains masks).
Suggested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.81d94d630c95.I9473da818cbeeb51b2f89dcc59b00019113e7f55@changeid
[add bugfix from Benjamin for iwl_mvm_get_valid_rx_ant()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the device initialized with ME active, this would indeed
work, since the NVM information would be obtained from ME.
However, in the much more likely case that ME isn't active
and the firmware takes actions requiring the sync, this was
not working correctly when the firmware is only run at init
to obtain NVM data, since mac80211 isn't even initialized.
Fix this by moving the 'pldr_sync' handling to a different
place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.45a94d480e56.Id9277f1df6a63ab0dfca0d0c0f448c759e1b8e73@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's quite a bit of code accessing sband iftype data
(HE, HE 6 GHz, EHT) and we always need to remember to use
the ieee80211_vif_type_p2p() helper. Add new helpers to
directly get it from the sband/vif rather than having to
call ieee80211_vif_type_p2p().
Convert most code with the following spatch:
@@
expression vif, sband;
@@
-ieee80211_get_he_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_eht_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_eht_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_he_6ghz_capa(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_6ghz_capa_vif(sband, vif)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.db099f49e764.Ie892966c49e22c7b7ee1073bc684f142debfdc84@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When CSME is connected and has link protection set, the driver must
connect to the same AP CSME is connected to.
When in link protection, modify scan request parameters to include
only the channel of the AP CSME is connected to and scan for the
same SSID. In addition, filter the scan results to include only
results from the same AP. This will make sure the driver will connect
to the same AP and will do it fast enough to keep the session alive.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.c1b55de3d704.I3895eebe18b3b672607695c887d728e113fc85ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
Major stack changes:
* TC offload support for drivers below mac80211
* reduced neighbor report (RNR) handling for AP mode
* mac80211 mesh fast-xmit and fast-rx support
* support for another mesh A-MSDU format
(seems nobody got the spec right)
Major driver changes:
Kalle moved the drivers that were just plain C files
in drivers/net/wireless/ to legacy/ and virtual/ dirs.
hwsim
* multi-BSSID support
* some FTM support
ath11k
* MU-MIMO parameters support
* ack signal support for management packets
rtl8xxxu
* support for RTL8710BU aka RTL8188GU chips
rtw89
* support for various newer firmware APIs
ath10k
* enabled threaded NAPI on WCN3990
iwlwifi
* lots of work for multi-link/EHT (wifi7)
* hardware timestamping support for some devices/firwmares
* TX beacon protection on newer hardware
* tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits)
wifi: clean up erroneously introduced file
wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del()
wifi: iwlwifi: separate AP link management queues
wifi: iwlwifi: mvm: free probe_resp_data later
wifi: iwlwifi: bump FW API to 75 for AX devices
wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta
wifi: iwlwifi: mvm: send full STA during HW restart
wifi: iwlwifi: mvm: rework active links counting
wifi: iwlwifi: mvm: update mac config when assigning chanctx
wifi: iwlwifi: mvm: use the correct link queue
wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta
wifi: iwlwifi: mvm: fix station link data leak
wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link
wifi: iwlwifi: mvm: use appropriate link for rate selection
wifi: iwlwifi: mvm: use the new lockdep-checking macros
wifi: iwlwifi: mvm: remove chanctx WARN_ON
wifi: iwlwifi: mvm: avoid sending MAC context for idle
wifi: iwlwifi: mvm: remove only link-specific AP keys
wifi: iwlwifi: mvm: skip inactive links
wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO
...
====================
Link: https://lore.kernel.org/r/20230330205612.921134-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For TM/FTM frames, report the hardware timestamps reported by the
fw as part of the RX/TX status. Since the fw reports the timestamps
in a dedicated notification (and not as part of the RX/TX status),
hold the frame until the fw timestamps notification is received.
Timestamping is enabled when a station is connected and disabled
when disconnected. For AP interface, only the first station will
have timestamping enabled since the fw only supports timestamping
for one peer.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.e0392d498101.I9bf12c8ecfb3f17253a13dc48a48647ddd6e7855@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some recent upstream debugging uncovered the fact that in
iwlwifi, the TXQ list manipulation is racy.
Introduce a new state bit for when the TXQ is completely
ready and can be used without locking, and if that's not
set yet acquire the lock to check everything correctly.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This could race if the queue is redirected while full, then
the flushing internally would start it while it's not yet
usable again. Fix it by using two state bits instead of just
one.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The CSR_HW_IF_CONFIG_REG register is no longer in use from
IWL_DEVICE_FAMILY_AX210 and on.
This register uses now for CSR_CTXT_INFO_BOOT_CTRL
which has a different meaning and a different format.
Currently we're writing to the register according to
CSR_HW_IF_CONFIG_REGs format, regardless to the device family.
This causes to miss-interpretation of the register value, as it is
parsed according to CSR_CTXT_INFO_BOOT_CTRLs format for devices
families >= IWL_DEVICE_FAMILY_AX210.
Fix this by writing to the register according to the old format
only for the relevant hardware.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221205102808.8e91eb10dc7d.I3882a2452785ef8b455d99af235e4477917bf46d@changeid
In order to support MLD, the key API is also changing to have
station masks instead of just the station ID etc. Change the
driver to support this, and add the new code in a new file so
it's more clearly separated.
For now this isn't separated at the mac80211 ops level, which
we wanted to do, but we're calling these functions in a place
when pre-start keys are installed in iwl_mvm_start_ap_ibss(),
and the function has some glue logic to mac80211. We may want
to change that later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221102165239.ed9ccd814abc.Iacc7360de68807fbac19e5b67c86504b39cc15df@changeid
