commit ac62a0174d upstream.
For some systems, the IPA driver must make a request to ensure that
its registers are retained across power collapse of the IPA hardware.
On such systems, we'll use the existence of the "qcom,qmp" property
as a signal that this request is required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ddc3a32488 upstream.
Mute the warning from "make dtbs_check":
larb@14016000: 'mediatek,larb-id' is a required property
arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@15001000: 'mediatek,larb-id' is a required property
arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@16010000: 'mediatek,larb-id' is a required property
arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
As the description of mediatek,larb-id, the property is only
required when the larbid is not consecutive from its IOMMU point of view.
Also, from the description of mediatek,larbs in
Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml, all the larbs
must sort by the larb index.
In mt8167, there is only one IOMMU HW and three larbs. The drivers already
know its larb index from the mediatek,larbs property of IOMMU, thus no
need this property.
Fixes: 27bb0e4285 ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220113111057.29918-3-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 320689a1b5 upstream.
When running dt_binding_check on the nvidia,tegra210-quad.yaml binding
document the following error is reported ...
nvidia,tegra210-quad.example.dt.yaml:0:0: /example-0/spi@70410000/flash@0:
failed to match any schema with compatible: ['spi-nor']
Update the example in the binding document to fix the above error.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 9684752e5f ("dt-bindings: spi: Add Tegra Quad SPI device tree binding")
Link: https://lore.kernel.org/r/20220307113529.315685-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ef248d9bd6 ]
This fixes the near-silence of the headphone jack on the ALC256-based
Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found
through trial and error, using known ALC298 hacks as inspiration. The
fixup is auto-enabled only when the NP730QCJ is detected. It can be
manually enabled using model=alc256-samsung-headphone.
Signed-off-by: Matt Kramer <mccleetus@gmail.com>
Link: https://lore.kernel.org/r/3168355.aeNJFYEL58@linus
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8484291132 ]
Although kptr_restrict is set to 0 and the kernel is booted with
no_hash_pointers parameter, the content of /proc/vmallocinfo is
lacking the real addresses.
/ # cat /proc/vmallocinfo
0x(ptrval)-0x(ptrval) 8192 load_module+0xc0c/0x2c0c pages=1 vmalloc
0x(ptrval)-0x(ptrval) 12288 start_kernel+0x4e0/0x690 pages=2 vmalloc
0x(ptrval)-0x(ptrval) 12288 start_kernel+0x4e0/0x690 pages=2 vmalloc
0x(ptrval)-0x(ptrval) 8192 _mpic_map_mmio.constprop.0+0x20/0x44 phys=0x80041000 ioremap
0x(ptrval)-0x(ptrval) 12288 _mpic_map_mmio.constprop.0+0x20/0x44 phys=0x80041000 ioremap
...
According to the documentation for /proc/sys/kernel/, %pK is
equivalent to %p when kptr_restrict is set to 0.
Fixes: 5ead723a20 ("lib/vsprintf: no_hash_pointers prints all addresses as unhashed")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/107476128e59bff11a309b5bf7579a1753a41aca.1645087605.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bddac7c1e0 upstream.
This reverts commit aa6f8dcbab.
It turns out this breaks at least the ath9k wireless driver, and
possibly others.
What the ath9k driver does on packet receive is to set up the DMA
transfer with:
int ath_rx_init(..)
..
bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
common->rx_bufsize,
DMA_FROM_DEVICE);
and then the receive logic (through ath_rx_tasklet()) will fetch
incoming packets
static bool ath_edma_get_buffers(..)
..
dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data);
if (ret == -EINPROGRESS) {
/*let device gain the buffer again*/
dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
return false;
}
and it's worth noting how that first DMA sync:
dma_sync_single_for_cpu(..DMA_FROM_DEVICE);
is there to make sure the CPU can read the DMA buffer (possibly by
copying it from the bounce buffer area, or by doing some cache flush).
The iommu correctly turns that into a "copy from bounce bufer" so that
the driver can look at the state of the packets.
In the meantime, the device may continue to write to the DMA buffer, but
we at least have a snapshot of the state due to that first DMA sync.
But that _second_ DMA sync:
dma_sync_single_for_device(..DMA_FROM_DEVICE);
is telling the DMA mapping that the CPU wasn't interested in the area
because the packet wasn't there. In the case of a DMA bounce buffer,
that is a no-op.
Note how it's not a sync for the CPU (the "for_device()" part), and it's
not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part).
Or rather, it _should_ be a no-op. That's what commit aa6f8dcbab
broke: it made the code bounce the buffer unconditionally, and changed
the DMA_FROM_DEVICE to just unconditionally and illogically be
DMA_TO_DEVICE.
[ Side note: purely within the confines of the swiotlb driver it wasn't
entirely illogical: The reason it did that odd DMA_FROM_DEVICE ->
DMA_TO_DEVICE conversion thing is because inside the swiotlb driver,
it uses just a swiotlb_bounce() helper that doesn't care about the
whole distinction of who the sync is for - only which direction to
bounce.
So it took the "sync for device" to mean that the CPU must have been
the one writing, and thought it meant DMA_TO_DEVICE. ]
Also note how the commentary in that commit was wrong, probably due to
that whole confusion, claiming that the commit makes the swiotlb code
"bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer"
which is nonsensical for two reasons:
- that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was
exactly when it always did - and should do - the bounce.
- since this is a sync for the device (not for the CPU), we're clearly
fundamentally not coping back stale data from the bounce buffers at
all, because we'd be copying *to* the bounce buffers.
So that commit was just very confused. It confused the direction of the
synchronization (to the device, not the cpu) with the direction of the
DMA (from the device).
Reported-and-bisected-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Olha Cherevyk <olha.cherevyk@gmail.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa6f8dcbab upstream.
Unfortunately, we ended up merging an old version of the patch "fix info
leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph
(the swiotlb maintainer), he asked me to create an incremental fix
(after I have pointed this out the mix up, and asked him for guidance).
So here we go.
The main differences between what we got and what was agreed are:
* swiotlb_sync_single_for_device is also required to do an extra bounce
* We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters
* The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE
must take precedence over DMA_ATTR_SKIP_CPU_SYNC
Thus this patch removes DMA_ATTR_OVERWRITE, and makes
swiotlb_sync_single_for_device() bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer.
Let me note, that if the size used with dma_sync_* API is less than the
size used with dma_[un]map_*, under certain circumstances we may still
end up with swiotlb not being transparent. In that sense, this is no
perfect fix either.
To get this bullet proof, we would have to bounce the entire
mapping/bounce buffer. For that we would have to figure out the starting
address, and the size of the mapping in
swiotlb_sync_single_for_device(). While this does seem possible, there
seems to be no firm consensus on how things are supposed to work.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: ddbd89deb7 ("swiotlb: fix info leak with DMA_FROM_DEVICE")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ddbd89deb7 ]
The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.
A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
and a corresponding dxferp. The peculiar thing about this is that TUR
is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
bounces the user-space buffer. As if the device was to transfer into
it. Since commit a45b599ad8 ("scsi: sg: allocate with __GFP_ZERO in
sg_build_indirect()") we make sure this first bounce buffer is
allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
device won't touch the buffer we prepare as if the we had a
DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
and the buffer allocated by SG is mapped by the function
virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
scatter-gather and not scsi generics). This mapping involves bouncing
via the swiotlb (we need swiotlb to do virtio in protected guest like
s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
(that is swiotlb) bounce buffer (which most likely contains some
previous IO data), to the first bounce buffer, which contains all
zeros. Then we copy back the content of the first bounce buffer to
the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
ain't all zeros and fails.
One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).
Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e9b6013a7c upstream.
Update the link to the "Software Techniques for Managing Speculation
on AMD Processors" whitepaper.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ad3eb1132 upstream.
Update the doc with the new fun.
[ bp: Massage commit message. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[fllinden@amazon.com: backported to 5.15]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f37c3bbc63 ]
Since referencing user space pointers is special, if the user wants to
filter on a field that is a pointer to user space, then they need to
specify it.
Add a ".ustring" attribute to the field name for filters to state that the
field is pointing to user space such that the kernel can take the
appropriate action to read that pointer.
Link: https://lore.kernel.org/all/yt9d8rvmt2jq.fsf@linux.ibm.com/
Fixes: 77360f9bbc ("tracing: Add test for user space strings when filtering on string pointers")
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77360f9bbc ]
Pingfan reported that the following causes a fault:
echo "filename ~ \"cpu\"" > events/syscalls/sys_enter_openat/filter
echo 1 > events/syscalls/sys_enter_at/enable
The reason is that trace event filter treats the user space pointer
defined by "filename" as a normal pointer to compare against the "cpu"
string. The following bug happened:
kvm-03-guest16 login: [72198.026181] BUG: unable to handle page fault for address: 00007fffaae8ef60
#PF: supervisor read access in kernel mode
#PF: error_code(0x0001) - permissions violation
PGD 80000001008b7067 P4D 80000001008b7067 PUD 2393f1067 PMD 2393ec067 PTE 8000000108f47867
Oops: 0001 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1 Comm: systemd Kdump: loaded Not tainted 5.14.0-32.el9.x86_64 #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:strlen+0x0/0x20
Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11
48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8
48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31
RSP: 0018:ffffb5b900013e48 EFLAGS: 00010246
RAX: 0000000000000018 RBX: ffff8fc1c49ede00 RCX: 0000000000000000
RDX: 0000000000000020 RSI: ffff8fc1c02d601c RDI: 00007fffaae8ef60
RBP: 00007fffaae8ef60 R08: 0005034f4ddb8ea4 R09: 0000000000000000
R10: ffff8fc1c02d601c R11: 0000000000000000 R12: ffff8fc1c8a6e380
R13: 0000000000000000 R14: ffff8fc1c02d6010 R15: ffff8fc1c00453c0
FS: 00007fa86123db40(0000) GS:ffff8fc2ffd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fffaae8ef60 CR3: 0000000102880001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
filter_pred_pchar+0x18/0x40
filter_match_preds+0x31/0x70
ftrace_syscall_enter+0x27a/0x2c0
syscall_trace_enter.constprop.0+0x1aa/0x1d0
do_syscall_64+0x16/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa861d88664
The above happened because the kernel tried to access user space directly
and triggered a "supervisor read access in kernel mode" fault. Worse yet,
the memory could not even be loaded yet, and a SEGFAULT could happen as
well. This could be true for kernel space accessing as well.
To be even more robust, test both kernel and user space strings. If the
string fails to read, then simply have the filter fail.
Note, TASK_SIZE is used to determine if the pointer is user or kernel space
and the appropriate strncpy_from_kernel/user_nofault() function is used to
copy the memory. For some architectures, the compare to TASK_SIZE may always
pick user space or kernel space. If it gets it wrong, the only thing is that
the filter will fail to match. In the future, this needs to be fixed to have
the event denote which should be used. But failing a filter is much better
than panicing the machine, and that can be solved later.
Link: https://lore.kernel.org/all/20220107044951.22080-1-kernelfans@gmail.com/
Link: https://lkml.kernel.org/r/20220110115532.536088fd@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Reported-by: Pingfan Liu <kernelfans@gmail.com>
Tested-by: Pingfan Liu <kernelfans@gmail.com>
Fixes: 87a342f5db ("tracing/filters: Support filtering for char * strings")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23885389db ]
Commit e428e250fd ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.
Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.
Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.
Fixes: e428e250fd ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 87ab9f6b74 upstream.
This reverts commit 39aead8373.
Revert the first (of 2) commits which disabled scrolling acceleration in
fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards
because of the performance penalty by doing screen scrolling by software
instead of using the existing graphic card 2D hardware acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0ac702f33 upstream.
Adjust the path of the ABI files for firewire.rst to prevent a
documentation build error. Prevents this problem:
Sphinx parallel build error:
docutils.utils.SystemMessage: Documentation/driver-api/firewire.rst:22: (SEVERE/4) Problems with "include" directive path:
InputError: [Errno 2] No such file or directory: '../Documentation/driver-api/ABI/stable/firewire-cdev'.
Fixes: 2f4830ef96 ("FireWire: add driver-api Introduction section")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220119033905.4779-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82ca67321f upstream.
The config RANDOMIZE_SLAB does not exist, the authors probably intended to
refer to the config RANDOMIZE_BASE, which provides kernel address-space
randomization. They probably just confused SLAB with BASE (these two
four-letter words coincidentally share three common letters), as they also
point out the config SLAB_FREELIST_RANDOM as further randomization within
the same sentence.
Fix the reference of the config for kernel address-space randomization to
the config that provides that.
Fixes: 6e88559470 ("Documentation: Add section about CPU vulnerabilities for Spectre")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211230171940.27558-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a111749522 upstream.
The data node reference documentation was missing a package that must
contain the property values, instead property name and multiple values
being present in a single package. This is not aligned with the _DSD
spec.
Fix it by adding the package for the values.
Also add the missing "reg" properties to two numbered nodes.
Fixes: b10134a364 ("ACPI: property: Document hierarchical data extension references")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 49bcb1506f ]
When converting the thermal-zones bindings to yaml the definition of the
contribution property changed. The intention is the same, an integer
value expressing a ratio of a sum on how much cooling is provided by the
device to the zone. But after the conversion the integer value is
limited to the range 0 to 100 and expressed as a percentage.
This is problematic for two reasons.
- This do not match how the binding is used. Out of the 18 files that
make use of the property only two (ste-dbx5x0.dtsi and
ste-hrefv60plus.dtsi) sets it at a value that satisfy the binding,
100. The remaining 16 files set the value higher and fail to validate.
- Expressing the value as a percentage instead of a ratio of the sum is
confusing as there is nothing to enforce the sum in the zone is not
greater then 100.
This patch restore the pre yaml conversion description and removes the
value limitation allowing the usage of the bindings to validate.
Fixes: 1202a442a3 ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211109103045.1403686-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9222ba68c3 ]
We've got a bug report about the non-working keyboard on ASUS ZenBook
UX425UA. It seems that the PS/2 device isn't ready immediately at
boot but takes some seconds to get ready. Until now, the only
workaround is to defer the probe, but it's available only when the
driver is a module. However, many distros, including openSUSE as in
the original report, build the PS/2 input drivers into kernel, hence
it won't work easily.
This patch adds the support for the deferred probe for i8042 stuff as
a workaround of the problem above. When the deferred probe mode is
enabled and the device couldn't be probed, it'll be repeated with the
standard deferred probe mechanism.
The deferred probe mode is enabled either via the new option
i8042.probe_defer or via the quirk table entry. As of this patch, the
quirk table contains only ASUS ZenBook UX425UA.
The deferred probe part is based on Fabio's initial work.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190256
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Samuel Čavoj <samuel@cavoj.net>
Link: https://lore.kernel.org/r/20211117063757.11380-1-tiwai@suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0ff29701ff upstream.
Update the documentation for kvm-intel's emulate_invalid_guest_state to
rectify the description of KVM's default behavior, and to document that
the behavior and thus parameter only applies to L1.
Fixes: a27685c33a ("KVM: VMX: Emulate invalid guest state by default")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-4-seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f8344f7693 ]
TMP461 is almost identical to TMP451 and was actually detected as TMP451
with the existing lm90 driver if its I2C address is 0x4c. Add support
for it to the lm90 driver. At the same time, improve the chip detection
function to at least try to distinguish between TMP451 and TMP461.
As a side effect, this fixes commit 24333ac26d ("hwmon: (tmp401) use
smb word operations instead of 2 smb byte operations"). TMP461 does not
support word operations on temperature registers, which causes bad
temperature readings with the tmp401 driver. The lm90 driver does not
perform word operations on temperature registers and thus does not have
this problem.
Support is listed as basic because TMP461 supports a sensor resolution
of 0.0625 degrees C, while the lm90 driver assumes a resolution of 0.125
degrees C. Also, the TMP461 supports negative temperatures with its
default temperature range, which is not the case for similar chips
supported by the lm90 and the tmp401 drivers. Those limitations will be
addressed with follow-up patches.
Fixes: 24333ac26d ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations")
Reported-by: David T. Wilson <david.wilson@nasa.gov>
Cc: David T. Wilson <david.wilson@nasa.gov>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
