Optimize get gpu metrics data function for smu_v13_0_12 to
allocate metrics structure only once
v2: Free and alloc moved to same function(Kevin)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi_port_num interface reports external link number for port number. To
be consistent, use the external link number for reporting other XGMI
link data also.
v2: For invalid link number return -EINVAL (Kevin)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_v13_0_display_clock_voltage_request() and
smu_v13_0_set_min_deep_sleep_dcefclk() were added in 2020 by
commit c05d1c4015 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
but have remained unused.
Remove them.
smu_v13_0_display_clock_voltage_request() was the only user
of smu_v13_0_set_hard_freq_limited_range(). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last use of smu_v11_0_get_dpm_level_range() was removed in 2020 by
commit 46a301e14e ("drm/amd/powerplay: drop unnecessary Navi1x specific
APIs")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add and expose board voltage node as vddboard to hwmon for smu_v13_0_6
v2: Replace ip check with supported sensor attribute(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill static metrics data for smu_v13_0_6
v2: Proceed with driver load just with warning even if board
voltage reads invalid value
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch static metrics table for smu_v13_0_6
v2: Add static metrics caps check to fetch static metrics table
v3: Update version having all fixes for static metrics support
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SMU v13.0.2 and SMU v13.0.6 variants user may choose custom min/max
clocks in manual perf mode. Those custom min/max values need to be
reset once user switches to auto or restores default settings.
Otherwise, they may get used inadvertently during the next operation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1e866f1fe5 ("drm/amd/pm: Prevent divide by zero")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use gpu_metrics_v1_8 for smu_v13_0_6 to fill metrics data
v2: Move exposing caps to separate patch, move smu_v13.0.12 gpu metrics
1.8 usage to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update smu metrics table to vesrion 0x10 for smu_v13_0_6
v2: Host metrics support removal moved to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Firmware algorithm changed and the values in this version
are not accurate thereby remove host limit metric support
for smu_v13_0_6, smu_v13_0_12 & smu_v13_0_14
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b64625a303 ("drm/amd/pm: correct the address of Arcturus fan related registers")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c05d1c4015 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Few of the metrics data for smu_v13_0_6 has not been reported
in Q10 format, remove UQ10 to UINT conversion for those
v2: Move smu_v13_0_12 changes to separate patch(Kevin)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain cases, it's desirable to avoid PMFW log transactions to
system memory. Add a mask bit to decide whether to allocate smu pool in
device memory or system memory.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, it seems like the code was carried over from RDNA3 because
it assumes two possible values to set. RDNA4, instead of having:
0: min SCLK
1: max SCLK
only has
0: SCLK offset
This change makes it so it only reports current offset value instead of
showing possible min/max values and their indices. Moreover, it now only
accepts the offset as a value, without the indice index.
Additionally, the lower bound was printed as %u by mistake.
Old:
OD_SCLK_OFFSET:
0: -500Mhz
1: 1000Mhz
OD_MCLK:
0: 97Mhz
1: 1259MHz
OD_VDDGFX_OFFSET:
0mV
OD_RANGE:
SCLK_OFFSET: -500Mhz 1000Mhz
MCLK: 97Mhz 1500Mhz
VDDGFX_OFFSET: -200mv 0mv
New:
OD_SCLK_OFFSET:
0Mhz
OD_MCLK:
0: 97Mhz
1: 1259MHz
OD_VDDGFX_OFFSET:
0mV
OD_RANGE:
SCLK_OFFSET: -500Mhz 1000Mhz
MCLK: 97Mhz 1500Mhz
VDDGFX_OFFSET: -200mv 0mv
Setting this offset:
Old: "s 1 <offset>"
New: "s <offset>"
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4036
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_sriov_multi_vf_mode to replace amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev).
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
