Ihor Solodrai reported selftest 'btf_tag/btf_type_tag_percpu_vmlinux_helper'
failure ([1]) during 6.16 merge window. The failure log:
...
7: (15) if r0 == 0x0 goto pc+1 ; R0=ptr_css_rstat_cpu()
; *(volatile int *)rstat; @ btf_type_tag_percpu.c:68
8: (61) r1 = *(u32 *)(r0 +0)
cannot access ptr member updated_children with moff 0 in struct css_rstat_cpu with off 0 size 4
Two changes are needed. First, 'struct cgroup_rstat_cpu' needs to be
replaced with 'struct css_rstat_cpu' to be consistent with new data
structure. Second, layout of 'css_rstat_cpu' is changed compared
to 'cgroup_rstat_cpu'. The first member becomes a pointer so
the bpf prog needs to do 8-byte load instead of 4-byte load.
[1] https://lore.kernel.org/bpf/6f688f2e-7d26-423a-9029-d1b1ef1c938a@linux.dev/
Cc: Ihor Solodrai <ihor.solodrai@linux.dev>
Cc: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20250529201151.1787575-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull tracing updates from Steven Rostedt:
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.
- Use a new tracer_tracing_disable/enable() instead of data->disable
flag
There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace
functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
Pull cgroup updates from Tejun Heo:
- cgroup rstat shared the tracking tree across all controllers with the
rationale being that a cgroup which is using one resource is likely
to be using other resources at the same time (ie. if something is
allocating memory, it's probably consuming CPU cycles).
However, this turned out to not scale very well especially with memcg
using rstat for internal operations which made memcg stat read and
flush patterns substantially different from other controllers. JP
Kobryn split the rstat tree per controller.
- cgroup BPF support was hooking into cgroup init/exit paths directly.
Convert them to use a notifier chain instead so that other usages can
be added easily. The two of the patches which implement this are
mislabeled as belonging to sched_ext instead of cgroup. Sorry.
- Relatively minor cpuset updates
- Documentation updates
* tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier
sched_ext: Introduce cgroup_lifetime_notifier
cgroup: Minor reorganization of cgroup_create()
cgroup, docs: cpu controller's interaction with various scheduling policies
cgroup, docs: convert space indentation to tab indentation
cgroup: avoid per-cpu allocation of size zero rstat cpu locks
cgroup, docs: be specific about bandwidth control of rt processes
cgroup: document the rstat per-cpu initialization
cgroup: helper for checking rstat participation of css
cgroup: use subsystem-specific rstat locks to avoid contention
cgroup: use separate rstat trees for each subsystem
cgroup: compare css to cgroup::self in helper for distingushing css
cgroup: warn on rstat usage by early init subsystems
cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask()
cgroup/rstat: Improve cgroup_rstat_push_children() documentation
cgroup: fix goto ordering in cgroup_init()
cgroup: fix pointer check in css_rstat_init()
cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs
cgroup/cpuset: Fix obsolete comment in cpuset_css_offline()
cgroup/cpuset: Always use cpu_active_mask
...
Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to the Intel
driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the x86 and PowerPC
platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker, Ian
Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang, Sandipan
Das, Thorsten Blum)"
* tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
perf/headers: Clean up <linux/perf_event.h> a bit
perf/uapi: Clean up <uapi/linux/perf_event.h> a bit
perf/uapi: Fix PERF_RECORD_SAMPLE comments in <uapi/linux/perf_event.h>
mips/perf: Remove driver-specific throttle support
xtensa/perf: Remove driver-specific throttle support
sparc/perf: Remove driver-specific throttle support
loongarch/perf: Remove driver-specific throttle support
csky/perf: Remove driver-specific throttle support
arc/perf: Remove driver-specific throttle support
alpha/perf: Remove driver-specific throttle support
perf/apple_m1: Remove driver-specific throttle support
perf/arm: Remove driver-specific throttle support
s390/perf: Remove driver-specific throttle support
powerpc/perf: Remove driver-specific throttle support
perf/x86/zhaoxin: Remove driver-specific throttle support
perf/x86/amd: Remove driver-specific throttle support
perf/x86/intel: Remove driver-specific throttle support
perf: Only dump the throttle log for the leader
perf: Fix the throttle logic for a group
perf/core: Add the is_event_in_freq_mode() helper to simplify the code
...
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Use folios for symlinks in the page cache
FUSE already uses folios for its symlinks. Mirror that conversion
in the generic code and the NFS code. That lets us get rid of a few
folio->page->folio conversions in this path, and some of the few
remaining users of read_cache_page() / read_mapping_page()
- Try and make a few filesystem operations killable on the VFS
inode->i_mutex level
- Add sysctl vfs_cache_pressure_denom for bulk file operations
Some workloads need to preserve more dentries than we currently
allow through out sysctl interface
A HDFS servers with 12 HDDs per server, on a HDFS datanode startup
involves scanning all files and caching their metadata (including
dentries and inodes) in memory. Each HDD contains approximately 2
million files, resulting in a total of ~20 million cached dentries
after initialization
To minimize dentry reclamation, they set vfs_cache_pressure to 1.
Despite this configuration, memory pressure conditions can still
trigger reclamation of up to 50% of cached dentries, reducing the
cache from 20 million to approximately 10 million entries. During
the subsequent cache rebuild period, any HDFS datanode restart
operation incurs substantial latency penalties until full cache
recovery completes
To maintain service stability, more dentries need to be preserved
during memory reclamation. The current minimum reclaim ratio (1/100
of total dentries) remains too aggressive for such workload. This
patch introduces vfs_cache_pressure_denom for more granular cache
pressure control
The configuration [vfs_cache_pressure=1,
vfs_cache_pressure_denom=10000] effectively maintains the full 20
million dentry cache under memory pressure, preventing datanode
restart performance degradation
- Avoid some jumps in inode_permission() using likely()/unlikely()
- Avid a memory access which is most likely a cache miss when
descending into devcgroup_inode_permission()
- Add fastpath predicts for stat() and fdput()
- Anonymous inodes currently don't come with a proper mode causing
issues in the kernel when we want to add useful VFS debug assert.
Fix that by giving them a proper mode and masking it off when we
report it to userspace which relies on them not having any mode
- Anonymous inodes currently allow to change inode attributes because
the VFS falls back to simple_setattr() if i_op->setattr isn't
implemented. This means the ownership and mode for every single
user of anon_inode_inode can be changed. Block that as it's either
useless or actively harmful. If specific ownership is needed the
respective subsystem should allocate anonymous inodes from their
own private superblock
- Raise SB_I_NODEV and SB_I_NOEXEC on the anonymous inode superblock
- Add proper tests for anonymous inode behavior
- Make it easy to detect proper anonymous inodes and to ensure that
we can detect them in codepaths such as readahead()
Cleanups:
- Port pidfs to the new anon_inode_{g,s}etattr() helpers
- Try to remove the uselib() system call
- Add unlikely branch hint return path for poll
- Add unlikely branch hint on return path for core_sys_select
- Don't allow signals to interrupt getdents copying for fuse
- Provide a size hint to dir_context for during readdir()
- Use writeback_iter directly in mpage_writepages
- Update compression and mtime descriptions in initramfs
documentation
- Update main netfs API document
- Remove useless plus one in super_cache_scan()
- Remove unnecessary NULL-check guards during setns()
- Add separate separate {get,put}_cgroup_ns no-op cases
Fixes:
- Fix typo in root= kernel parameter description
- Use KERN_INFO for infof()|info_plog()|infofc()
- Correct comments of fs_validate_description()
- Mark an unlikely if condition with unlikely() in
vfs_parse_monolithic_sep()
- Delete macro fsparam_u32hex()
- Remove unused and problematic validate_constant_table()
- Fix potential unsigned integer underflow in fs_name()
- Make file-nr output the total allocated file handles"
* tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (43 commits)
fs: Pass a folio to page_put_link()
nfs: Use a folio in nfs_get_link()
fs: Convert __page_get_link() to use a folio
fs/read_write: make default_llseek() killable
fs/open: make do_truncate() killable
fs/open: make chmod_common() and chown_common() killable
include/linux/fs.h: add inode_lock_killable()
readdir: supply dir_context.count as readdir buffer size hint
vfs: Add sysctl vfs_cache_pressure_denom for bulk file operations
fuse: don't allow signals to interrupt getdents copying
Documentation: fix typo in root= kernel parameter description
include/cgroup: separate {get,put}_cgroup_ns no-op case
kernel/nsproxy: remove unnecessary guards
fs: use writeback_iter directly in mpage_writepages
fs: remove useless plus one in super_cache_scan()
fs: add S_ANON_INODE
fs: remove uselib() system call
device_cgroup: avoid access to ->i_rdev in the common case in devcgroup_inode_permission()
fs/fs_parse: Remove unused and problematic validate_constant_table()
fs: touch up predicts in inode_permission()
...
sk->sk_txrehash is only used for TCP.
Let's restrict SO_TXREHASH to TCP to reflect this.
Later, we will make sk_txrehash a part of the union for other
protocol families.
Note that we need to modify BPF selftest not to get/set
SO_TEREHASH for non-TCP sockets.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test redirection logic. All supported and unsupported redirect combinations
are tested for success and failure respectively.
BPF_MAP_TYPE_SOCKMAP
BPF_MAP_TYPE_SOCKHASH
x
sk_msg-to-egress
sk_msg-to-ingress
sk_skb-to-egress
sk_skb-to-ingress
x
AF_INET, SOCK_STREAM
AF_INET6, SOCK_STREAM
AF_INET, SOCK_DGRAM
AF_INET6, SOCK_DGRAM
AF_UNIX, SOCK_STREAM
AF_UNIX, SOCK_DGRAM
AF_VSOCK, SOCK_STREAM
AF_VSOCK, SOCK_SEQPACKET
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-5-a1ea723f7e7e@rbox.co
Introduce SKIP_LLVM makefile variable that allows to avoid using llvm
dependencies when building BPF selftests. This is different from
existing feature-llvm, as the latter is a result of automatic detection
and should not be set by user explicitly.
Avoiding llvm dependencies could be useful for environments that do not
have them, given that as of now llvm dependencies are required only by
jit_disasm_helpers.c.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250522013813.125428-1-mykyta.yatsenko5@gmail.com
Different subsystems may call cgroup_rstat_updated() within the same
cgroup, resulting in a tree of pending updates from multiple subsystems.
When one of these subsystems is flushed via cgroup_rstat_flushed(), all
other subsystems with pending updates on the tree will also be flushed.
Change the paradigm of having a single rstat tree for all subsystems to
having separate trees for each subsystem. This separation allows for
subsystems to perform flushes without the side effects of other subsystems.
As an example, flushing the cpu stats will no longer cause the memory stats
to be flushed and vice versa.
In order to achieve subsystem-specific trees, change the tree node type
from cgroup to cgroup_subsys_state pointer. Then remove those pointers from
the cgroup and instead place them on the css. Finally, change update/flush
functions to make use of the different node type (css). These changes allow
a specific subsystem to be associated with an update or flush. Separate
rstat trees will now exist for each unique subsystem.
Since updating/flushing will now be done at the subsystem level, there is
no longer a need to keep track of updated css nodes at the cgroup level.
The list management of these nodes done within the cgroup (rstat_css_list
and related) has been removed accordingly.
Conditional guards for checking validity of a given css were placed within
css_rstat_updated/flush() to prevent undefined behavior occuring from kfunc
usage in bpf programs. Guards were also placed within css_rstat_init/exit()
in order to help consolidate calls to them. At call sites for all four
functions, the existing guards were removed.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Remove llvm dependencies from binaries that do not use llvm libraries.
Filter out libxml2 from llvm dependencies, as it seems that
it is not actually used. This patch reduced link dependencies
for BPF selftests.
The next line was adding llvm dependencies to every target in the
makefile, while the only targets that require those are test
runnners (test_progs, test_progs-no_alu32,...):
```
$(OUTPUT)/$(TRUNNER_BINARY): LDLIBS += $$(LLVM_LDLIBS)
```
Before this change:
ldd linux/tools/testing/selftests/bpf/veristat
linux-vdso.so.1 (0x00007ffd2c3fd000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007fe1dcf89000)
libz.so.1 => /lib64/libz.so.1 (0x00007fe1dcf6f000)
libm.so.6 => /lib64/libm.so.6 (0x00007fe1dce94000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007fe1dcddd000)
libxml2.so.2 => /lib64/libxml2.so.2 (0x00007fe1dcc54000)
libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007fe1dca00000)
libc.so.6 => /lib64/libc.so.6 (0x00007fe1dc600000)
/lib64/ld-linux-x86-64.so.2 (0x00007fe1dcfb1000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fe1dc9d4000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fe1dcc38000)
After:
ldd linux/tools/testing/selftests/bpf/veristat
linux-vdso.so.1 (0x00007ffc83370000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007f4b87515000)
libz.so.1 => /lib64/libz.so.1 (0x00007f4b874fb000)
libc.so.6 => /lib64/libc.so.6 (0x00007f4b87200000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f4b87444000)
/lib64/ld-linux-x86-64.so.2 (0x00007f4b8753d000)
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250516195522.311769-1-mykyta.yatsenko5@gmail.com
Most tracepoints in the kernel are created with TRACE_EVENT(). The
TRACE_EVENT() macro (and DECLARE_EVENT_CLASS() and DEFINE_EVENT() where in
reality, TRACE_EVENT() is just a helper macro that calls those other two
macros), will create not only a tracepoint (the function trace_<event>()
used in the kernel), it also exposes the tracepoint to user space along
with defining what fields will be saved by that tracepoint.
There are a few places that tracepoints are created in the kernel that are
not exposed to userspace via tracefs. They can only be accessed from code
within the kernel. These tracepoints are created with DEFINE_TRACE()
Most of these tracepoints end with "_tp". This is useful as when the
developer sees that, they know that the tracepoint is for in-kernel only
(meaning it can only be accessed inside the kernel, either directly by the
kernel or indirectly via modules and BPF programs) and is not exposed to
user space.
Instead of making this only a process to add "_tp", enforce it by making
the DECLARE_TRACE() append the "_tp" suffix to the tracepoint. This
requires adding DECLARE_TRACE_EVENT() macros for the TRACE_EVENT() macro
to use that keeps the original name.
Link: https://lore.kernel.org/all/20250418083351.20a60e64@gandalf.local.home/
Cc: netdev <netdev@vger.kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250510163730.092fad5b@gandalf.local.home
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently rst2man is required to build bpf selftests, as the tool is
used by Makefile.docs. rst2man may be missing in some build
environments and is not essential for selftests. It makes sense to
allow user to skip building docs.
This patch adds SKIP_DOCS variable into bpf selftests Makefile that when
set to 1 allows skipping building docs, for example:
make -C tools/testing/selftests TARGETS=bpf SKIP_DOCS=1
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250510002450.365613-1-mykyta.yatsenko5@gmail.com
Tests:
- 458/p ld_dw: xor semi-random 64-bit imms, test 5
- 501/p scale: scale test 1
- 502/p scale: scale test 2
fail in verbose mode due to bpf_vlog[] overflowing. These tests
generate large verifier logs that exceed the current buffer size,
causing them to fail to load.
Increase the size of the bpf_vlog[] buffer to accommodate larger
logs and prevent false failures during test runs with verbose output.
Signed-off-by: Gregory Bell <grbell@redhat.com>
Link: https://lore.kernel.org/r/e49267100f07f099a5877a3a5fc797b702bbaf0c.1747058195.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running test_verifier with the -v flag and a test with
`expected_ret==VERBOSE_ACCEPT`, the opts.log_level is unintentionally
overwritten because the verbose flag takes precedence. This leads to
a mismatch in the expected and actual contents of bpf_vlog, causing
tests to fail incorrectly.
Reorder the conditional logic that sets opts.log_level to preserve
the expected log level and prevent it from being overridden by -v.
Signed-off-by: Gregory Bell <grbell@redhat.com>
Link: https://lore.kernel.org/r/182bf00474f817c99f968a9edb119882f62be0f8.1747058195.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, __xlated_unpriv and __jited_unpriv do not work because the
BPF syscall will overwrite info.jited_prog_len and info.xlated_prog_len
with 0 if the process is not bpf_capable(). This bug was not noticed
before, because there is no test that actually uses
__xlated_unpriv/__jited_unpriv.
To resolve this, simply restore the capabilities earlier (but still
after loading the program). Adding this here unconditionally is fine
because the function first checks that the capabilities were initialized
before attempting to restore them.
This will be important later when we add tests that check whether a
speculation barrier was inserted in the correct location.
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Fixes: 9c9f733913 ("selftests/bpf: allow checking xlated programs in verifier_* tests")
Fixes: 7d743e4c75 ("selftests/bpf: __jited test tag to check disassembly after jit")
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250501073603.1402960-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, we pass 0x1234567890abcdef to __retval() for the following
two tests:
verifier_load_acquire/load_acquire_64
verifier_store_release/store_release_64
However, the upper 32 bits of that value are being ignored, since
__retval() expects an int. Actually, the tests would still pass even if
I change '__retval(0x1234567890abcdef)' to e.g. '__retval(0x90abcdef)'.
Restructure the tests a bit to test the entire 64-bit values properly.
Do the same to their 8-, 16- and 32-bit variants as well to keep the
style consistent.
Fixes: ff3afe5da9 ("selftests/bpf: Add selftests for load-acquire and store-release instructions")
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/d67f4c6f6ee0d0388cbce1f4892ec4176ee2d604.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of open-coding the conditions, use
'#ifdef CAN_USE_LOAD_ACQ_STORE_REL' to guard the following tests:
verifier_precision/bpf_load_acquire
verifier_precision/bpf_store_release
verifier_store_release/*
Note that, for the first two tests in verifier_precision.c, switching to
'#ifdef CAN_USE_LOAD_ACQ_STORE_REL' means also checking if
'__clang_major__ >= 18', which has already been guaranteed by the outer
'#if' check.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/45d7e025f6e390a8ff36f08fc51e31705ac896bd.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch has a much simplified rbtree usage from the
kernel sch_fq qdisc. It has a "struct node_data" which can be
added to two different rbtrees which are ordered by different keys.
The test first populates both rbtrees. Then search for a lookup_key
from the "groot0" rbtree. Once the lookup_key is found, that node
refcount is taken. The node is then removed from another "groot1"
rbtree.
While searching the lookup_key, the test will also try to remove
all rbnodes in the path leading to the lookup_key.
The test_{root,left,right}_spinlock_true tests ensure that the
return value of the bpf_rbtree functions is a non_own_ref node pointer.
This is done by forcing an verifier error by calling a helper
bpf_jiffies64() while holding the spinlock. The tests then
check for the verifier message
"call bpf_rbtree...R0=rcu_ptr_or_null_node..."
The other test_{root,left,right}_spinlock_false tests ensure that
they must be called with spinlock held.
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> # Check non_own_ref marking
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_rbtree_{remove,left,right} requires the root's lock to be held.
They also check the node_internal->owner is still owned by that root
before proceeding, so it is safe to allow refcounted bpf_rb_node
pointer to be used in these kfuncs.
In a bpf fq implementation which is much closer to the kernel fq,
https://lore.kernel.org/bpf/20250418224652.105998-13-martin.lau@linux.dev/,
a networking flow (allocated by bpf_obj_new) can be added to two different
rbtrees. There are cases that the flow is searched from one rbtree,
held the refcount of the flow, and then removed from another rbtree:
struct fq_flow {
struct bpf_rb_node fq_node;
struct bpf_rb_node rate_node;
struct bpf_refcount refcount;
unsigned long sk_long;
};
int bpf_fq_enqueue(...)
{
/* ... */
bpf_spin_lock(&root->lock);
while (can_loop) {
/* ... */
if (!p)
break;
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
if (gc_f->sk_long == sk_long) {
f = bpf_refcount_acquire(gc_f);
break;
}
/* ... */
}
bpf_spin_unlock(&root->lock);
if (f) {
bpf_spin_lock(&q->lock);
bpf_rbtree_remove(&q->delayed, &f->rate_node);
bpf_spin_unlock(&q->lock);
}
}
bpf_rbtree_{left,right} do not need this change but are relaxed together
with bpf_rbtree_remove instead of adding extra verifier logic
to exclude these kfuncs.
To avoid bi-sect failure, this patch also changes the selftests together.
The "rbtree_api_remove_unadded_node" is not expecting verifier's error.
The test now expects bpf_rbtree_remove(&groot, &m->node) to return NULL.
The test uses __retval(0) to ensure this NULL return value.
Some of the "only take non-owning..." failure messages are changed also.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-05-02
We've added 14 non-merge commits during the last 10 day(s) which contain
a total of 13 files changed, 740 insertions(+), 121 deletions(-).
The main changes are:
1) Avoid skipping or repeating a sk when using a UDP bpf_iter,
from Jordan Rife.
2) Fixed a crash when a bpf qdisc is set in
the net.core.default_qdisc, from Amery Hung.
3) A few other fixes in the bpf qdisc, from Amery Hung.
- Always call qdisc_watchdog_init() in the .init prologue such that
the .reset/.destroy epilogue can always call qdisc_watchdog_cancel()
without issue.
- bpf_qdisc_init_prologue() was incorrectly returning an error
when the bpf qdisc is set as the default_qdisc and the mq is creating
the default_qdisc. It is now fixed.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Cleanup bpf qdisc selftests
selftests/bpf: Test attaching a bpf qdisc with incomplete operators
bpf: net_sched: Make some Qdisc_ops ops mandatory
selftests/bpf: Test setting and creating bpf qdisc as default qdisc
bpf: net_sched: Fix bpf qdisc init prologue when set as default qdisc
selftests/bpf: Add tests for bucket resume logic in UDP socket iterators
selftests/bpf: Return socket cookies from sock_iter_batch progs
bpf: udp: Avoid socket skips and repeats during iteration
bpf: udp: Use bpf_udp_iter_batch_item for bpf_udp_iter_state batch items
bpf: udp: Get rid of st_bucket_done
bpf: udp: Make sure iter->batch always contains a full bucket snapshot
bpf: udp: Make mem flags configurable through bpf_iter_udp_realloc_batch
bpf: net_sched: Fix using bpf qdisc as default qdisc
selftests/bpf: Fix compilation errors
====================
Link: https://patch.msgid.link/20250503010755.4030524-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some cleanups:
- Remove unnecessary kfuncs declaration
- Use _ns in the test name to run tests in a separate net namespace
- Call skeleton __attach() instead of bpf_map__attach_struct_ops() to
simplify tests.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Implement .destroy in bpf_fq and bpf_fifo as it is now mandatory.
Test attaching a bpf qdisc with a missing operator .init. This is not
allowed as bpf qdisc qdisc_watchdog_cancel() could have been called with
an uninitialized timer.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
First, test that bpf qdisc can be set as default qdisc. Then, attach
an mq qdisc to see if bpf qdisc can be successfully created and grafted.
The test is a sequential test as net.core.default_qdisc is global.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Introduce a set of tests that exercise various bucket resume scenarios:
* remove_seen resumes iteration after removing a socket from the bucket
that we've already processed. Before, with the offset-based approach,
this test would have skipped an unseen socket after resuming
iteration. With the cookie-based approach, we now see all sockets
exactly once.
* remove_unseen exercises the condition where the next socket that we
would have seen is removed from the bucket before we resume iteration.
This tests the scenario where we need to scan past the first cookie in
our remembered cookies list to find the socket from which to resume
iteration.
* remove_all exercises the condition where all sockets we remembered
were removed from the bucket to make sure iteration terminates and
returns no more results.
* add_some exercises the condition where a few, but not enough to
trigger a realloc, sockets are added to the head of the current bucket
between reads. Before, with the offset-based approach, this test would
have repeated sockets we've already seen. With the cookie-based
approach, we now see all sockets exactly once.
* force_realloc exercises the condition that we need to realloc the
batch on a subsequent read, since more sockets than can be held in the
current batch array were added to the current bucket. This exercies
the logic inside bpf_iter_udp_realloc_batch that copies cookies into
the new batch to make sure nothing is skipped or repeated.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the iter_udp_soreuse and iter_tcp_soreuse programs to write the
cookie of the current socket, so that we can track the identity of the
sockets that the iterator has seen so far. Update the existing do_test
function to account for this change to the iterator program output. At
the same time, teach both programs to work with AF_INET as well.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
