Add a new set of tests validating behavior of capturing stack traces
with build ID. We extend uprobe_multi target binary with ability to
trigger uprobe (so that we can capture stack traces from it), but also
we allow to force build ID data to be either resident or non-resident in
memory (see also a comment about quirks of MADV_PAGEOUT).
That way we can validate that in non-sleepable context we won't get
build ID (as expected), but with sleepable uprobes we will get that
build ID regardless of it being physically present in memory.
Also, we add a small add-on linker script which reorders
.note.gnu.build-id section and puts it after (big) .text section,
putting build ID data outside of the very first page of ELF file. This
will test all the relaxations we did in build ID parsing logic in kernel
thanks to freader abstraction.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add 3 test cases for skb dynptr used in tp_btf:
- test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is
read-only.
- skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb
should fail in fentry/fexit.
In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb,
test_pkt_access is used for its test_run, as in kfree_skb.c. Because the
test process is different from others, a new setup type is defined,
i.e., SETUP_SKB_PROG_TP.
The result is like:
$ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf'
#84/14 dynptr/test_dynptr_skb_tp_btf:OK
#84 dynptr:OK
#127 kfunc_dynptr_param:OK
Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED
$ ./test_progs -t 'dynptr/skb_invalid_ctx_f'
#84/85 dynptr/skb_invalid_ctx_fentry:OK
#84/86 dynptr/skb_invalid_ctx_fexit:OK
#84 dynptr:OK
#127 kfunc_dynptr_param:OK
Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED
Also fix two coding style nits (change spaces to tabs).
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240911033719.91468-6-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Currently, xskxceiver assumes that MAX_SKB_FRAGS value is always 17
which is not true - since the introduction of BIG TCP this can now take
any value between 17 to 45 via CONFIG_MAX_SKB_FRAGS.
Adjust the TOO_MANY_FRAGS test case to read the currently configured
MAX_SKB_FRAGS value by reading it from /proc/sys/net/core/max_skb_frags.
If running system does not provide that sysctl file then let us try
running the test with a default value.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240910124129.289874-1-maciej.fijalkowski@intel.com
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-09-10
1) Remove an unneeded WARN_ON on packet offload.
From Patrisious Haddad.
2) Add a copy from skb_seq_state to buffer function.
This is needed for the upcomming IPTFS patchset.
From Christian Hopps.
3) Spelling fix in xfrm.h.
From Simon Horman.
4) Speed up xfrm policy insertions.
From Florian Westphal.
5) Add and revert a patch to support xfrm interfaces
for packet offload. This patch was just half cooked.
6) Extend usage of the new xfrm_policy_is_dead_or_sk helper.
From Florian Westphal.
7) Update comments on sdb and xfrm_policy.
From Florian Westphal.
8) Fix a null pointer dereference in the new policy insertion
code From Florian Westphal.
9) Fix an uninitialized variable in the new policy insertion
code. From Nathan Chancellor.
* tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: Restore dir assignments in xfrm_hash_rebuild()
xfrm: policy: fix null dereference
Revert "xfrm: add SA information to the offloaded packet"
xfrm: minor update to sdb and xfrm_policy comments
xfrm: policy: use recently added helper in more places
xfrm: add SA information to the offloaded packet
xfrm: policy: remove remaining use of inexact list
xfrm: switch migrate to xfrm_policy_lookup_bytype
xfrm: policy: don't iterate inexact policies twice at insert time
selftests: add xfrm policy insertion speed test script
xfrm: Correct spelling in xfrm.h
net: add copy from skb_seq_state to buffer function
xfrm: Remove documentation WARN_ON to limit return values for offloaded SA
====================
Link: https://patch.msgid.link/20240910065507.2436394-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Padding is not included in UDP and TCP checksums. Therefore, reduce the
length of the checksummed data to include only the data in the IP
payload. This fixes spurious reported checksum failures like
rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe
pkt: bad csum
Technically it is possible for there to be trailing bytes after the UDP
data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) +
udp.len < ip.len). However, we don't generate such packets.
Fixes: 91a7de8560 ("selftests/net: add csum offload test")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In x86's debug_regs test, change the RDMSR(MISC_ENABLES) in the single-step
testcase to a WRMSR(TSC_DEADLINE) in order to verify that KVM honors
KVM_GUESTDBG_SINGLESTEP when handling a fastpath VM-Exit.
Note, the extra coverage is effectively Intel-only, as KVM only handles
TSC_DEADLINE in the fastpath when the timer is emulated via the hypervisor
timer, a.k.a. the VMX preemption timer.
Link: https://lore.kernel.org/r/20240830044448.130449-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Lay the groundwork to import into kselftests the over 150 packetdrill
TCP/IP conformance tests on github.com/google/packetdrill.
Florian recently added support for packetdrill tests in nf_conntrack,
in commit a8a388c2aa ("selftests: netfilter: add packetdrill based
conntrack tests").
This patch takes a slightly different approach. It relies on
ksft_runner.sh to run every *.pkt file in the directory.
Any future imports of packetdrill tests should require no additional
coding. Just add the *.pkt files.
Initially import only two features/directories from github. One with a
single script, and one with two. This was the only reason to pick
tcp/inq and tcp/md5.
The path replaces the directory hierarchy in github with a flat space
of files: $(subst /,_,$(wildcard tcp/**/*.pkt)). This is the most
straightforward option to integrate with kselftests. The Linked thread
reviewed two ways to maintain the hierarchy: TEST_PROGS_RECURSE and
PRESERVE_TEST_DIRS. But both introduce significant changes to
kselftest infra and with that risk to existing tests.
Implementation notes:
- restore alphabetical order when adding the new directory to
tools/testing/selftests/Makefile
- imported *.pkt files and support verbatim from the github project,
except for
- update `source ./defaults.sh` path (to adjust for flat dir)
- add SPDX headers
- remove one author statement
- Acknowledgment: drop an e (checkpatch)
Tested:
make -C tools/testing/selftests \
TARGETS=net/packetdrill \
run_tests
make -C tools/testing/selftests \
TARGETS=net/packetdrill \
install INSTALL_PATH=$KSFT_INSTALL_PATH
# in virtme-ng
./run_kselftest.sh -c net/packetdrill
./run_kselftest.sh -t net/packetdrill:tcp_inq_client.pkt
Link: https://lore.kernel.org/netdev/20240827193417.2792223-1-willemdebruijn.kernel@gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905231653.2427327-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support testcases that are themselves not executable, but need an
interpreter to run them.
If a test file is not executable, but an executable file
ksft_runner.sh exists in the TARGET dir, kselftest will run
./ksft_runner.sh ./$BASENAME_TEST
Packetdrill may add hundreds of packetdrill scripts for testing. These
scripts must be passed to the packetdrill process.
Have kselftest run each test directly, as it already solves common
runner requirements like parallel execution and isolation (netns).
A previous RFC added a wrapper in between, which would have to
reimplement such functionality.
Link: https://lore.kernel.org/netdev/66d4d97a4cac_3df182941a@willemb.c.googlers.com.notmuch/T/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905231653.2427327-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is nice to have a visual alignment in the test output to present the
different results, but it makes less sense in the TAP output that is
there for computers.
It sounds then better to remove the duplicated whitespaces in the TAP
output, also because it can cause some issues with TAP parsers expecting
only one space around the directive delimiter (#).
While at it, change the variable name (result_msg) to something more
explicit.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240906-net-next-mptcp-ksft-subtest-time-v2-5-31d5ee4f3bdf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When I was trying to modify the tx timestamping feature, I found that
running "./txtimestamp -4 -C -L 127.0.0.1" didn't reflect the error:
I succeeded to generate timestamp stored in the skb but later failed
to report it to the userspace (which means failed to put css into cmsg).
It can happen when someone writes buggy codes in __sock_recv_timestamp(),
for example.
After adding the check so that running ./txtimestamp will reflect the
result correctly like this if there is a bug in the reporting phase:
protocol: TCP
payload: 10
server port: 9000
family: INET
test SND
USR: 1725458477 s 667997 us (seq=0, len=0)
Failed to report timestamps
USR: 1725458477 s 718128 us (seq=0, len=0)
Failed to report timestamps
USR: 1725458477 s 768273 us (seq=0, len=0)
Failed to report timestamps
USR: 1725458477 s 818416 us (seq=0, len=0)
Failed to report timestamps
...
In the future, it will help us detect whether the new coming patch has
bugs or not.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905160035.62407-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When "arg#%d expected pointer to ctx, but got %s" error is printed, both
template parts actually point to the type of the argument, therefore, it
will also say "but got PTR", regardless of what was the actual register
type.
Fix the message to print the register type in the second part of the
template, change the existing test to adapt to the new format, and add a
new test to test the case when arg is a pointer to context, but reg is a
scalar.
Fixes: 00b85860fe ("bpf: Rewrite kfunc argument handling")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240909133909.1315460-1-maxim@isovalent.com
commit ce17ad0d54 ("cxl: Wait Memory_Info_Valid before access memory
related info") added another implementation, which is
cxl_dvsec_mem_range_valid(), of waiting for memory_info_valid without
realizing it duplicated wait_for_valid(). Remove wait_for_valid() and
retain cxl_dvsec_mem_range_valid() as the former is hardcoded to check
only the Memory_Info_Valid bit of DVSEC range 1, while the latter allows
for selection between DVSEC range 1 or 2 via parameter.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-3-yanfei.xu@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Currently exec-target.c is linked statically with libc, which on Fedora
at least requires installing an additional package (glibc-static).
If that package is not installed the build fails with:
CC exec_target
/usr/bin/ld: cannot find -lc: No such file or directory
collect2: error: ld returned 1 exit status
All exec_target.c does is call sys_exit, which can be done easily enough
using inline assembly, and removes the requirement for a static libc to
be installed.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240812094152.418586-1-maddy@linux.ibm.com
Pull RISC-V fixes from Palmer Dabbelt:
- A revert for the mmap() change that ties the allocation range to the
hint adress, as what we tried to do ended up regressing on other
userspace workloads.
- A fix to avoid a kernel memory leak when emulating misaligned
accesses from userspace.
- A Kconfig fix for toolchain vector detection, which now correctly
detects vector support on toolchains where the V extension depends on
the M extension.
- A fix to avoid failing the linear mapping bootmem bounds check on
NOMMU systems.
- A fix for early alternatives on relocatable kernels.
* tag 'riscv-for-linus-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix RISCV_ALTERNATIVE_EARLY
riscv: Do not restrict memory size because of linear mapping on nommu
riscv: Fix toolchain vector detection
riscv: misaligned: Restrict user access to kernel memory
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
When resctrl is built on architectures without __cpuid_count()
support, build fails. resctrl uses __cpuid_count() defined in
kselftest.h.
Even though the problem is seen while building resctrl on aarch64,
this error can be seen on any platform that doesn't support CPUID.
CPUID is a x86/x86-64 feature and code paths with CPUID asm commands
will fail to build on all other architectures.
All others tests call __cpuid_count() do so from x86/x86_64 code paths
when _i386__ or __x86_64__ are defined. resctrl is an exception.
Fix the problem by defining __cpuid_count() only when __i386__ or
__x86_64__ are defined in kselftest.h and changing resctrl to call
__cpuid_count() only when __i386__ or __x86_64__ are defined.
In file included from resctrl.h:24,
from cat_test.c:11:
In function ‘arch_supports_noncont_cat’,
inlined from ‘noncont_cat_run_test’ at cat_test.c:326:6:
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:304:17: note: in expansion of macro ‘__cpuid_count’
304 | __cpuid_count(0x10, 1, eax, ebx, ecx, edx);
| ^~~~~~~~~~~~~
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:306:17: note: in expansion of macro ‘__cpuid_count’
306 | __cpuid_count(0x10, 2, eax, ebx, ecx, edx);
Fixes: ae638551ab ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/lkml/20240809071059.265914-1-usama.anjum@collabora.com/
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix crash when btf_parse_base() returns an error (Martin Lau)
- Fix out of bounds access in btf_name_valid_section() (Jeongjun Park)
* tag 'bpf-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a selftest to check for incorrect names
bpf: add check for invalid name in btf_name_valid_section()
bpf: Fix a crash when btf_parse_base() returns an error pointer
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, bluetooth and wireless.
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during
mcp251x_open
- eth: r8152: fix the firmware communication error due to use of bulk
write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h"
* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
ila: call nf_unregister_net_hooks() sooner
tools/net/ynl: fix cli.py --subscribe feature
MAINTAINERS: fix ptp ocp driver maintainers address
selftests: net: enable bind tests
net: dsa: vsc73xx: fix possible subblocks range of CAPT block
sched: sch_cake: fix bulk flow accounting logic for host fairness
docs: netdev: document guidance on cleanup.h
net: xilinx: axienet: Fix race in axienet_stop
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
r8152: fix the firmware doesn't work
fou: Fix null-ptr-deref in GRO.
bareudp: Fix device stats updates.
net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
bpf, net: Fix a potential race in do_sock_getsockopt()
net: dqs: Do not use extern for unused dql_group
sch/netem: fix use after free in netem_dequeue
usbnet: modern method to get random MAC
MAINTAINERS: wifi: cw1200: add net-cw1200.h
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
...
This patch adds DENYLIST.riscv64 file for riscv64. It will help BPF CI
and local vmtest to mask failing and unsupported test cases.
We can use the following command to use deny list in local vmtest as
previously mentioned by Manu.
PLATFORM=riscv64 CROSS_COMPILE=riscv64-linux-gnu- vmtest.sh \
-l ./libbpf-vmtest-rootfs-2024.08.30-noble-riscv64.tar.zst -- \
./test_progs -d \
\"$(cat tools/testing/selftests/bpf/DENYLIST.riscv64 \
| cut -d'#' -f1 \
| sed -e 's/^[[:space:]]*//' \
-e 's/[[:space:]]*$//' \
| tr -s '\n' ','\
)\"
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-9-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support cross platform testing for vmtest. The variable $ARCH in the
current script is platform semantics, not kernel semantics. Rename it to
$PLATFORM so that we can easily use $ARCH in cross-compilation. And drop
`set -u` unbound variable check as we will use CROSS_COMPILE env
variable. For now, Using PLATFORM= and CROSS_COMPILE= options will
enable cross platform testing:
PLATFORM=<platform> CROSS_COMPILE=<toolchain> vmtest.sh -- ./test_progs
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-7-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently, when compiling bpf selftests on RV64, the following
compilation failure occurred:
progs/bpf_dctcp.c:29:21: error: redefinition of 'fallback' as different kind of symbol
29 | volatile const char fallback[TCP_CA_NAME_MAX];
| ^
/workspace/tools/testing/selftests/bpf/tools/include/vmlinux.h:86812:15: note: previous definition is here
86812 | typedef u32 (*fallback)(u32, const unsigned char *, size_t);
The reason is that the `fallback` symbol has been defined in
arch/riscv/lib/crc32.c, which will cause symbol conflicts when vmlinux.h
is included in bpf_dctcp. Let we rename `fallback` string to
`fallback_cc` in bpf_dctcp to fix this compilation failure.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-3-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
