[Why]
Specific TBT4 dock doesn't send out short HPD to notify source
that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec
and cause source can't send out streams to mst sinks.
[How]
To cover this misbehavior, add an additional polling method to detect
DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept.
Just hook up our handler to drm mgr->cbs->poll_hpd_irq().
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors & warnings reported by checkpatch:
ERROR: space required before the open brace '{'
ERROR: space required before the open parenthesis '('
ERROR: that open brace { should be on the previous line
ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: else should follow close brace '}'
ERROR: open brace '{' following function definitions go on the next line
ERROR: code indent should use tabs where possible
WARNING: braces {} are not necessary for single statement blocks
WARNING: void function return statements are not generally useful
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Up until now, amdgpu was silently degrading to vsync when
user-space requested an async flip but the hardware didn't support
it.
The hardware doesn't support immediate flips when the update changes
the FB pitch, the DCC state, the rotation, enables or disables CRTCs
or planes, etc. This is reflected in the dm_crtc_state.update_type
field: UPDATE_TYPE_FAST means that immediate flip is supported.
Silently degrading async flips to vsync is not the expected behavior
from a uAPI point-of-view. Xorg expects async flips to fail if
unsupported, to be able to fall back to a blit. i915 already behaves
this way.
This patch aligns amdgpu with uAPI expectations and returns a failure
when an async flip is not possible.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why&How]
DCN301 does not have FAMS hence the workaround needed on other DCN3x
variants related to OTG min/max selector programming is not applicable for it.
Hence isolate it and have it use the old sequence without workaround.
Fixes: 1598fc5764 ("drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+")
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Make a few functions non static so that they can be reused for other
asic. This is in preparation for separating out OTG programming sequence
for DCN301
Fixes: 1598fc5764 ("drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+")
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Improve debugging mechanism for Gaming FAMS
- Add monitor specific edid quirks
- Fixes for Phantom pipe
- Fixes for Shapper LUT
- Clean up asserts
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- A full update is required if the number of planes for a given
stream changes
- The new fast update path only checked for stream and plane updates,
but there could be a plane addition or removal without one of the
stream and plane updates triggering a full update
- Add an explicit check for number of planes changing for a full update
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- We want to limit the new fast update path to address and gamma updates
only.
- Add a check in dc_update_planes_and_stream to only take the new fast
update path if we only have the specific fast updates defined.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The shaper LUT requires a 10-bit value of the delta between segments. We
were using dc_fixpt_clamp_u0d10() to do that but it doesn't do what we
want it to do. It will preserve 10-bit precision after the decimal
point, but that's not quite what we want. We want 14-bit precision and
discard the 4 most-significant bytes.
To do that we'll do dc_fixpt_clamp_u0d14() & 0x3ff instead.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If shaper and 3D LUT data updates, lut_3d bit in update_flag is updated
and we need to call set_input_transfer_func to program DPP shaper and 3D
LUTs. Small cleanup of code style in the related if-condition.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This display doesn't properly indicate link loss through DPCD bits such
as CR_DONE / CHANNEL_EQ_DONE / SYMBOL_LOCKED / INTERLANE_ALIGN_DONE,
which all remain set.
In addition, DPCD200Eh doesn't match the value of DPCD204h in all cases.
For these reasons, we can miss re-training the link, since we don't
properly detect link loss with this display.
[Why]
Add display-specific workaround to read DPCD204h, so that we can detect
link loss based on 128b132b-specific status bits in this register.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, it is possible for us to access memory that we shouldn't.
Since, we acquire (possibly dangling) pointers to dirty rectangles
before doing a bounds check to make sure we can actually accommodate the
number of dirty rectangles userspace has requested to fill. This issue
is especially evident if a compositor requests both MPO and damage clips
at the same time, in which case I have observed a soft-hang. So, to
avoid this issue, perform the bounds check before filling a single dirty
rectangle and WARN() about it, if it is ever attempted in
fill_dc_dirty_rect().
Cc: stable@vger.kernel.org # 6.1+
Fixes: 30ebe41582 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- DCN314 fixes
- DCN32x fixes
- New fast update sequence enablement
- DC mode clock switching enablement for DCN32x
- DP link loss fix
- New debugfs entry to set MST link settings
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- DC mode clock switch interface was previously only executed
for DCN303. Enable it for DCN32x so that the interface is called
correctly
- Assign function pointers for DCN32x that are used in the dc mode
interface
- Update the dc mode interface to work generically for each ASIC
- In update_clocks, make sure to consider softmax if we're in DC mode
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We don't check 128b132b-specific bits in LANE_ALIGN_STATUS_UPDATED DPCD
registers when parsing link loss status, which can cause us to miss a
link loss notification from some sinks.
[How]
Add a 128b132b-specific status bit check.
Cc: stable@vger.kernel.org # 6.3+
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using debugfs to change MST link settings, we need to wait until
the next stream update to apply the preferred link setting. So, trigger
a hotplug event right after the preferred link setting is applied.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Limiting clocks to DC mode max results in some
display modes to no longer be supported
How:
Disable the path that limits the clock values
Fixes: 3b718dcaf1 ("drm/amd/display: Filter out AC mode frequencies on DC mode systems")
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear update flags so the next flip does not have any redundant
programming (if a subsequent flip does not have a stream or plane
update, the update flags are not cleared).
Fixes: 0baae62463 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Condition for programming manually trigger used the wrong pipe (always
used top pipe instead of the one we are iterating through).
Fixes: 0baae62463 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This partially reverts commit de231189e7 ("drm/amd/display: Fix
possible underflow for displays with large vblank").
[Why]
The increased value of VBlankNomDefaultUS causes underflow at the
desktop of an IP KVM setup
[How]
Change the value from 800 back to 668
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Identify issues that arise by using the tests/doubletest.cocci
semantic patch. Need to remove duplicate expression in if statement.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The sequence for collecting down_reply from source perspective should
be:
Request_n->repeat (get partial reply of Request_n->clear message ready
flag to ack DPRX that the message is received) till all partial
replies for Request_n are received->new Request_n+1.
Now there is chance that drm_dp_mst_hpd_irq() will fire new down
request in the tx queue when the down reply is incomplete. Source is
restricted to generate interveleaved message transactions so we should
avoid it.
Also, while assembling partial reply packets, reading out DPCD DOWN_REP
Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be
wrapped up as a complete operation for reading out a reply packet.
Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might
be risky. e.g. If the reply of the new request has overwritten the
DPRX DOWN_REP Sideband MSG buffer before source writing one to clear
DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply
for the new request. Should handle the up request in the same way.
[How]
Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ
event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might
trigger drm_dp_mst_kick_tx() only when there is no on going message
transaction.
Changes since v1:
* Reworked on review comments received
-> Adjust the fix to let driver explicitly kick off new down request
when mst irq event is handled and acked
-> Adjust the commit message
Changes since v2:
* Adjust the commit message
* Adjust the naming of the divided 2 functions and add a new input
parameter "ack".
* Adjust code flow as per review comments.
Changes since v3:
* Update the function description of drm_dp_mst_hpd_irq_handle_event
Changes since v4:
* Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align
the size of esi[]
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning:
display/dc/dcn10/dcn10_optc.c:45: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* apply_front_porch_workaround TODO FPGA still need?
display/dc/dcn10/dcn10_optc.c:136: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* program_timing_generator used by mode timing set
display/dc/dcn10/dcn10_optc.c:391: warning: Function parameter or member 'optc' not described in 'optc1_set_timing_double_buffer'
display/dc/dcn10/dcn10_optc.c:391: warning: Function parameter or member 'enable' not described in 'optc1_set_timing_double_buffer'
display/dc/dcn10/dcn10_optc.c:404: warning: Function parameter or member 'optc' not described in 'optc1_unblank_crtc'
display/dc/dcn10/dcn10_optc.c:404: warning: expecting prototype for unblank_crtc(). Prototype was for optc1_unblank_crtc() instead
display/dc/dcn10/dcn10_optc.c:427: warning: Function parameter or member 'optc' not described in 'optc1_blank_crtc'
display/dc/dcn10/dcn10_optc.c:427: warning: expecting prototype for blank_crtc(). Prototype was for optc1_blank_crtc() instead
display/dc/dcn10/dcn10_optc.c:496: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Enable CRTC
display/dc/dcn10/dcn10_optc.c:895: warning: Cannot understand *****************************************************************************
on line 895 - I thought it was a doc line
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following gcc with W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:285: warning: Function parameter or member 'dc' not described in 'dcn32_determine_det_override'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:285: warning: Function parameter or member 'context' not described in 'dcn32_determine_det_override'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:285: warning: Function parameter or member 'pipes' not described in 'dcn32_determine_det_override'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:624: warning: Cannot understand * *****************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:676: warning: Cannot understand * *****************************************************************
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Stylon Wang <stylon.wang@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
