To verify CSV output, just check the number of separators (",") using
the tr and wc commands like this.
grep -v "^#" ${result} | tr -d -c | wc -c
Now it expects 6 columns (and 5 separators) in the output, but it may
be changed later so count the field in the header first and compare it
to the actual output lines.
$ cat ${result}
# output: contended, total wait, max wait, avg wait, type, caller
1, 28787, 28787, 28787, spinlock, raw_spin_rq_lock_nested+0x1b
The test looks like below now:
$ sudo ./perf test -v contention
86: kernel lock contention analysis test :
--- start ---
test child forked, pid 2705822
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
Testing perf lock contention --callstack-filter (w/ unix_stream)
Testing perf lock contention --callstack-filter with task aggregation
Testing perf lock contention CSV output
test child finished with 0
---- end ----
kernel lock contention analysis test: Ok
Acked-by: Ian Rogers <irogers@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230628200141.2739587-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This test checks if the output of perf stat to match event names and
metrics. So it wants the output lines to have both event name and
metric. Otherwise it should skip the line.
On AMD machines, the instruction event has two metrics and they are printed
in separate lines. It makes the line without event name like below:
# perf stat -a sleep 1
Performance counter stats for 'system wide':
64,383.34 msec cpu-clock # 64.048 CPUs utilized
14,526 context-switches # 225.617 /sec
112 cpu-migrations # 1.740 /sec
190 page-faults # 2.951 /sec
807,558,652 cycles # 0.013 GHz (83.30%)
69,809,799 stalled-cycles-frontend # 8.64% frontend cycles idle (83.30%)
196,983,266 stalled-cycles-backend # 24.39% backend cycles idle (83.30%)
424,876,008 instructions # 0.53 insn per cycle
(here) ---> # 0.46 stalled cycles per insn (83.30%)
97,788,321 branches # 1.519 M/sec (83.34%)
4,147,377 branch-misses # 4.24% of all branches (83.46%)
1.005241409 seconds time elapsed
Also modern Intel machines have TopDown metrics which also don't have
event names.
# perf stat -a sleep 1
Performance counter stats for 'system wide':
8,015.39 msec cpu-clock # 7.996 CPUs utilized
5,823 context-switches # 726.477 /sec
189 cpu-migrations # 23.580 /sec
139 page-faults # 17.342 /sec
435,139,308 cycles # 0.054 GHz
193,891,345 instructions # 0.45 insn per cycle
42,773,028 branches # 5.336 M/sec
2,298,113 branch-misses # 5.37% of all branches
TopdownL1 # 25.5 % tma_backend_bound
/--> # 7.9 % tma_bad_speculation
(here) --+ # 55.7 % tma_frontend_bound
\--> # 10.9 % tma_retiring
1.002395924 seconds time elapsed
There is a check to skip TopdownL1 and TopdownL2 specifically but it
does not cover every affected lines.
So there is another check to skip the line if it has nothing on the left
side of # sign. Well.. it seems ok but that's not enough too.
When aggregation mode (like --per-socket or --per-thread) is used, it
adds some prefix (e.g. CPU socket, task name and PID) in the output
line. So the test code ignores them to normalize result.
A problem can happen for per-thread mode when task name contains one or
more spaces. It'd only ignore the first part of the task name, and it
thinks there's something more in the line so it would not skip.
# perf stat -a --perf-thread sleep 1
...
perf-21276 # 70.2 % tma_backend_bound
perf-21276 # 3.9 % tma_bad_speculation
perf-21276 # 10.5 % tma_frontend_bound
perf-21276 # 15.3 % tma_retiring
^^^^^^^^^^
(ignored)
my task-21328 # 70.2 % tma_backend_bound
my task-21328 # 3.9 % tma_bad_speculation
my task-21328 # 10.5 % tma_frontend_bound
my task-21328 # 15.3 % tma_retiring
^^
(ignored)
So I think it should look at the metric names instead. Add skip_metric
to hold the list of names to skip. It would contain 'stalled cycles per
insn' and metrics started by 'tma_'.
Fixes: 99a04a48f2 ("perf test: Add test case for the standard 'perf stat' output")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230623230139.985594-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On AMD machines, the perf stat STD output test failed like below:
$ sudo ./perf test -v 98
98: perf stat STD output linter :
--- start ---
test child forked, pid 1841901
Checking STD output: no argswrong event metric.
expected 'GHz' in 108,121 stalled-cycles-frontend # 10.88% frontend cycles idle
test child finished with -1
---- end ----
perf stat STD output linter: FAILED!
This is because there are stalled-cycles-{frontend,backend} events are
used by default. The current logic checks the event_name array to find
which event it's running. But 'cycles' event comes before those stalled
cycles event and it matches first. So it tries to find 'GHz' metric
in the output (which is for the 'cycles') and fails.
Move the stalled-cycles-{frontend,backend} events before 'cycles' so
that it can find the stalled cycles events first.
Also add a space after 'no args' test name for consistency.
Fixes: 99a04a48f2 ("perf test: Add test case for the standard 'perf stat' output")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230623230139.985594-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The task-analyzer.py script (actually every other scripts too) requires
PERF_EXEC_PATH env to find dependent libraries and scripts. For scripts
test to run correctly, it needs to set PERF_EXEC_PATH to the perf tool
source directory.
Instead of blindly update the env, let's check the directory structure
to make sure it points to the correct location.
Fixes: e8478b84d6 ("perf test: add new task-analyzer tests")
Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The commit fc51fc87b1 factored out the helper functions to a library
but the new file had execute permission. Due to the way it detects
the shell test scripts, it showed up in the perf test list unexpectedly.
$ ./perf test list 2>&1 | grep 86
76: x86 bp modify
77: x86 Sample parsing
78: x86 hybrid
86: <---- (here)
$ ./perf test -v 86
86: :
--- start ---
test child forked, pid 1932207
test child finished with 0
---- end ----
: Ok
As it's a collection of library functions, it should not run as is.
Let's remove the execute permission.
Fixes: fc51fc87b1 ("perf test: Move all the check functions of stat CSV output to lib")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230622055832.83476-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Test "perf script task-analyzer tests" fails in environment with missing
libtraceevent support, as perf record fails to create the perf.data
file, which further tests depend on.
Instead, when perf is not compiled with libtraceevent support, skip
those tests instead of failing them, by checking the output of `perf
record --dry-run` to see if it prints the error "libtraceevent is
necessary for tracepoint support"
For the following output, perf compiled with: `make NO_LIBTRACEEVENT=1`
Before the patch:
108: perf script task-analyzer tests :
test child forked, pid 24105
failed to open perf.data: No such file or directory (try 'perf record' first)
FAIL: "invokation of perf script report task-analyzer command failed" Error message: ""
FAIL: "test_basic" Error message: "Failed to find required string:'Comm'."
failed to open perf.data: No such file or directory (try 'perf record' first)
FAIL: "invokation of perf script report task-analyzer --ns --rename-comms-by-tids 0:random command failed" Error message: ""
FAIL: "test_ns_rename" Error message: "Failed to find required string:'Comm'."
failed to open perf.data: No such file or directory (try 'perf record' first)
<...>
perf script task-analyzer tests: FAILED!
With this patch, the script instead returns 2 signifying SKIP, and after
the patch:
108: perf script task-analyzer tests :
test child forked, pid 26010
libtraceevent is necessary for tracepoint support
WARN: Skipping tests. No libtraceevent support
test child finished with -2
perf script task-analyzer tests: Skip
Fixes: e8478b84d6 ("perf test: Add new task-analyzer tests")
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-18-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixed the following shellcheck issues in test_task_analyzer.sh file:
SC2086: Double quote to prevent globbing and word splitting
warnings in shell-check.
Fixes the following shellcheck issues,
SC2086: Double quote to prevent globbing and word splitting
warnings in shell-check.
Before Patch:
$ shellcheck ./test_task_analyzer.sh | grep "SC2086" | ...
In ./test_task_analyzer.sh line 13:
SC2086: Double quote to prevent globbing and word splitting.
In ./test_task_analyzer.sh line 24:
SC2086: Double quote to prevent globbing and word splitting.
In ./test_task_analyzer.sh line 39:
SC2086: Double quote to prevent globbing and word splitting.
After Patch:
$ shellcheck ./test_task_analyzer.sh | grep -i "SC2086"
None
perf test result after patch:
PASS: "test_basic"
PASS: "test_ns_rename"
PASS: "test_ms_filtertasks_highlight"
PASS: "test_extended_times_timelimit_limittasks"
PASS: "test_summary"
PASS: "test_summaryextended"
PASS: "test_summaryonly"
PASS: "test_extended_times_summary_ns"
PASS: "test_extended_times_summary_ns"
PASS: "test_csv"
PASS: "test_csvsummary"
PASS: "test_csv_extended_times"
PASS: "test_csvsummary_extended"
Signed-off-by: Aboorva Devarajan <aboorvad@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-10-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixed shellcheck warning SC2076 in stat_all_metrics.sh.
Before the patch:
shell$ shellcheck stat_all_metrics.sh
In stat_all_metrics.sh line 9:
if [[ "$result" =~ "${m:0:50}" ]] || [[ "$result" =~ "<not supported>" ]]
^---------^ SC2076: Don't quote right-hand
side of =~, it'll match literally rather than as a regex.
In stat_all_metrics.sh line 15:
if [[ "$result" =~ "${m:0:50}" ]]
^---------^ SC2076: Don't quote right-hand
side of =~, it'll match literally rather than as a regex.
In stat_all_metrics.sh line 22:
if [[ "$result" =~ "${m:0:50}" ]]
^---------^ SC2076: Don't quote right-hand
side of =~, it'll match literally rather than as a regex.
After the patch:
shell$ shellcheck stat_all_metrics.sh
shell$
Signed-off-by: Barnali Guha Thakurata <barnali@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-9-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixed the following shellcheck issues in test_arm_coresight.sh file:
In tools/perf/tests/shell/test_arm_coresight.sh line 31:
trap - exit term int
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
In tools/perf/tests/shell/test_arm_coresight.sh line 35:
trap cleanup_files exit term int
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
In tools/perf/tests/shell/test_arm_coresight.sh line 92:
if [ $? -eq 0 -a -e "$1/enable_sink" ]; then
^-- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
Fixed above warnings by:
1)Capitalize signals(INT, TERM, EXIT) to avoid mixed/lower case naming of
signals.
2)Expression [p -a q] was not defined,changed it to [p] && [q] to avoid the
ambiguity as this is older format using -a or -o ,now we use [p] && [q] in
place of [p -a q] and [p] || [q] in place of [p -o q].
Result after fixing the issues:
shell$ shellcheck -S warning test_arm_coresight.sh
shell$
Signed-off-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-8-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running the shellcheck on stat+csv_output resulted in the following
warning.
Result with shellcheck without patch:
=====
$ shellcheck -S warning stat+csv_output.sh
In stat+csv_output.sh line 23:
[ $(uname -m) = "s390x" ] && exp='^[6-7]$'
^---------^ SC2046: Quote this to prevent word splitting.
In stat+csv_output.sh line 51:
[ $(id -u) != 0 ] && [ $(cat /proc/sys/kernel/perf_event_paranoid) -gt $1 ]
^------^ SC2046: Quote this to prevent word splitting.
^-- SC2046: Quote this to prevent word splitting.
=====
Fixed the warning SC2046 by adding quotes to prevent word splitting.
Result with shellcheck with patch:
=====
$ shellcheck -S warning tests/shell/stat+csv_output.sh
$ ./perf test "stat CSV output linter"
96: perf stat CSV output linter : Ok
=====
Signed-off-by: Korrapati Likhitha <likhitha@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-6-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck -S on daemon.sh throws below warnings:
Result from shellcheck:
# shellcheck -S warning daemon.sh
local line_name=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $2 }'`
^-------^ SC2155: Declare and assign separately to avoid masking return values.
trap "echo 'FAILED: Signal caught'; daemon_exit ${config}; exit 1" SIGINT SIGTERM
^-------^ SC2064: Use single quotes, otherwise this expands now rather than when signalled.
count=`ls ${base}/session-test/ | grep perf.data | wc -l`
^-- SC2010: Don't use ls | grep. Use a glob or a for loop with a condition to allow non-alphanumeric filenames.
if [ ${size} != "OK" -o ${type} != "OK" ]; then
^-- SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
Fixed above warnings by:
- declaring and assigning local variables separately
- To fix SC2010, instead of using "ls | grep", used glob to allow non-alphanumeric filenames
- Used single quotes to prevent expanding.
Result from shellcheck after patch changes:
$ shellcheck -S warning daemon.sh
$ echo $?
0
Signed-off-by: Shirisha G <shirisha@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-5-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The recent --per-cache option test caused a problem. According to the
option name, I think it should check args.per_cache instead of
args.per_cache_instance.
$ sudo ./perf test -v 99
99: perf stat JSON output linter :
--- start ---
test child forked, pid 3086101
Checking json output: no args [Success]
Checking json output: system wide [Success]
Checking json output: interval [Success]
Checking json output: event [Success]
Checking json output: per thread [Success]
Checking json output: per node [Success]
Checking json output: system wide no aggregation [Success]
Checking json output: per core [Success]
Checking json output: per cache_instance Test failed for input:
...
Traceback (most recent call last):
File "linux/tools/perf/tests/shell/lib/perf_json_output_lint.py", line 88, in <module>
elif args.per_core or args.per_socket or args.per_node or args.per_die or args.per_cache_instance:
AttributeError: 'Namespace' object has no attribute 'per_cache_instance'
test child finished with -1
---- end ----
perf stat JSON output linter: FAILED!
Fixes: bfce728db3 ("pert tests: Add tests for new "perf stat --per-cache" aggregation option")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230524210600.3095830-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit adds support for testing the JSON output generated by the
'perf data' command's conversion to JSON functionality.
The test script now includes a step to ensure that the resulting JSON
file contains valid data.
Changes:
V1 -> V2:
Added a check for the existence of the result output file.
Replaced the usage of jq with json.load for validating the JSON format.
Checks using ShellCheck and checkpatch, addressing and resolving warnings.
Removed the unnecessary root permission check.
Modified the 'perf record' command to avoid requiring root permissions.
Committer testing:
$ perf test to-json
115: 'perf data convert --to-json' command test : Ok
$ perf test -v to-json
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
115: 'perf data convert --to-json' command test :
--- start ---
test child forked, pid 1746867
Testing Perf Data Convertion Command to JSON
Perf Data Converter Command to JSON [SUCCESS]
Validating Perf Data Converted JSON file
The file contains valid JSON format [SUCCESS]
test child finished with 0
---- end ----
'perf data convert --to-json' command test: Ok
$
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/ZGcoJBAGlknjsA/n@yoga
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Anup Sharma <anupnewsmail@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
[ Fixup indentation to use consistently tabs, not a mixture of spaces and tabs, have 'if ... ; then' on the same line ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test case 'Test java symbol' might run for a long time. On Fedora 38 the
run time is very, very long:
Output before:
# time ./perf test 108
108: Test java symbol : Ok
real 22m15.775s
user 3m42.584s
sys 4m30.685s
#
The reason is a lookup for the server for debug symbols as shown in:
# cat /etc/debuginfod/elfutils.urls
https://debuginfod.fedoraproject.org/
#
This lookup is done for every symbol/sample, so about 3500 lookups
will take place.
To omit this lookup, which is not needed, unset environment variable
DEBUGINFOD_URLS=''.
Output after:
# time ./perf test 108
108: Test java symbol : Ok
real 0m6.242s
user 0m4.982s
sys 0m3.243s
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230509131847.835974-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit a980755beb.
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test case probe libc's inet_pton & backtrace it with ping fails with
Fedora 38 on x86_64.
Function getaddrinfo() does not show up in the call chain anymore:
# ./perf script
ping 1803 [000] 728.567146: probe_libc:inet_pton: (7f5275afc840)
133840 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
27b4a __libc_start_call_main+0x7a (/usr/lib64/libc.so.6)
27c0b __libc_start_main@@GLIBC_2.34+0x8b (/usr/lib64/libc.so.6)
ping 1803 [000] 728.567184: probe_libc:inet_pton: (7f5275afc840)
133840 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
493e main+0xcde (/usr/bin/ping)
27b4a __libc_start_call_main+0x7a (/usr/lib64/libc.so.6)
#
which causes the test case to fail. Remove function getaddrinfo()
from list of expected functions.
Output before:
# ./perf test 'libc'
91: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Output after:
# ./perf test 'libc'
91: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230503081255.3372986-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With Fedora 38 the perf test 86 probe libc's inet_pton fails on s390.
The call chain of the ping command changed. The functions
text_to_binary_address() and gaih_inet() do not show up in the call
chain anymore.
Output before:
# ./perf test -v 86
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 541050
fgrep: warning: fgrep is obsolescent; using grep -F
fgrep: warning: fgrep is obsolescent; using grep -F
BFD: DWARF error: could not find variable specification at offset 0x22011
...
ping 541078 [002] 348826.679581: probe_libc:inet_pton_1: (3ffad84b940)
14b940 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
10e9c3 __GI_getaddrinfo+0xeb3 (inlined)
4397 main+0x737 (/usr/bin/ping)
FAIL: expected backtrace entry "gaih_inet.*\+0x[[:xdigit:]]\
+[[:space:]]\(/usr/lib64/libc.so.6|inlined\)$"
got "4397 main+0x737 (/usr/bin/ping)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
#
Output after:
# ./perf test -v 86
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 541098
fgrep: warning: fgrep is obsolescent; using grep -F
fgrep: warning: fgrep is obsolescent; using grep -F
BFD: DWARF error: could not find variable specification at offset 0x309d1
...
ping 541126 [006] 349309.099067: probe_libc:inet_pton_1: (3ffb7f4b940)
14b940 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
10e9c3 __GI_getaddrinfo+0xeb3 (inlined)
4397 main+0x737 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230503081134.3372415-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Testcase stat_all_metrics.sh fails in powerpc:
98: perf all metrics test : FAILED!
Logs with verbose:
[command]# ./perf test 98 -vv
98: perf all metrics test :
--- start ---
test child forked, pid 13262
Testing BRU_STALL_CPI
Testing COMPLETION_STALL_CPI
----
Testing TOTAL_LOCAL_NODE_PUMPS_P23
Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'.
Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
----
Based on above logs, we could see some of the hv-24x7 metric events
fails, and logs suggest to run the metric event with -a option. This
change happened after the commit a4b8cfcabb ("perf stat: Delay
metric parsing"), which delayed the metric parsing phase and now before
metric parsing phase perf tool identifies, whether target is system-wide
or not. With this change, perf_event_open will fails with workload
monitoring for uncore events as expected.
The perf all metric test case fails as some of the hv-24x7 metric events
may need bigger workload with system wide monitoring to get the data.
Fix this issue by changing current system wide check from true workload
to sleep 0.01 workload.
Result with the patch changes in powerpc:
98: perf all metrics test : Ok
Fixes: a4b8cfcabb ("perf stat: Delay metric parsing")
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230215093827.124921-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
