With the intent of removing driver selects from Kconfig.socs in
arch/riscv, essential drivers that were being selected there could
instead by enabled by defaulting them to the value of the SoC's Kconfig
symbol.
Do so here & drop the depend on RISC-V - the SOC_ symbols are only
defined there anyway.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221123161921.81195-1-conor@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There is an array bounds violation present during clock registration,
triggered by current code by only specific toolchains. This seems to
fail gracefully in v6.0-rc1, using a toolchain build from the riscv-
gnu-toolchain repo and with clang-15, and life carries on. While
converting the driver to use standard clock structs/ops, kernel panics
were seen during boot when built with clang-15:
[ 0.581754] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b1
[ 0.591520] Oops [#1]
[ 0.594045] Modules linked in:
[ 0.597435] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-00011-g8e1459cf4eca #1
[ 0.606188] Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
[ 0.613012] epc : __clk_register+0x4a6/0x85c
[ 0.617759] ra : __clk_register+0x49e/0x85c
[ 0.622489] epc : ffffffff803faf7c ra : ffffffff803faf74 sp : ffffffc80400b720
[ 0.630466] gp : ffffffff810e93f8 tp : ffffffe77fe60000 t0 : ffffffe77ffb3800
[ 0.638443] t1 : 000000000000000a t2 : ffffffffffffffff s0 : ffffffc80400b7c0
[ 0.646420] s1 : 0000000000000001 a0 : 0000000000000001 a1 : 0000000000000000
[ 0.654396] a2 : 0000000000000001 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.662373] a5 : ffffffff803a5810 a6 : 0000000200000022 a7 : 0000000000000006
[ 0.670350] s2 : ffffffff81099d48 s3 : ffffffff80d6e28e s4 : 0000000000000028
[ 0.678327] s5 : ffffffff810ed3c8 s6 : ffffffff810ed3d0 s7 : ffffffe77ffbc100
[ 0.686304] s8 : ffffffe77ffb1540 s9 : ffffffe77ffb1540 s10: 0000000000000008
[ 0.694281] s11: 0000000000000000 t3 : 00000000000000c6 t4 : 0000000000000007
[ 0.702258] t5 : ffffffff810c78c0 t6 : ffffffe77ff88cd0
[ 0.708125] status: 0000000200000120 badaddr: 00000000000000b1 cause: 000000000000000d
[ 0.716869] [<ffffffff803fb892>] devm_clk_hw_register+0x62/0xaa
[ 0.723420] [<ffffffff80403412>] mpfs_clk_probe+0x1e0/0x244
In v6.0-rc1 and later, this issue is visible without the follow on
patches doing the conversion using toolchains provided by our Yocto
meta layer too.
It fails on "clk_periph_timer" - which uses a different parent, that it
tries to find using the macro:
\#define PARENT_CLK(PARENT) (&mpfs_cfg_clks[CLK_##PARENT].cfg.hw)
If parent is RTCREF, so the macro becomes: &mpfs_cfg_clks[33].cfg.hw
which is well beyond the end of the array. Amazingly, builds with GCC
11.1 see no problem here, booting correctly and hooking the parent up
etc. Builds with clang-15 do not, with the above panic.
Change the macro to use specific offsets depending on the parent rather
than the dt-binding's clock IDs.
Fixes: 1c6a7ea32b ("clk: microchip: mpfs: add RTCREF clock control")
CC: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220909123123.2699583-2-conor.dooley@microchip.com
Currently the mpfs clock driver uses a reference clock called the
"msspll", set in the device tree, as the parent for the cpu/axi/ahb
(config) clocks. The frequency of the msspll is determined by the FPGA
bitstream & the bootloader configures the clock to match the bitstream.
The real reference is provided by a 100 or 125 MHz off chip oscillator.
However, the msspll clock is not actually the parent of all clocks on
the system - the reference clock for the rtc/mtimer actually has the
off chip oscillator as its parent.
In order to fix this, add support for reading the configuration of the
msspll & reparent the "config" clocks so that they are derived from
this clock rather than the reference in the device tree.
Fixes: 635e5e7337 ("clk: microchip: Add driver for Microchip PolarFire SoC")
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220413075835.3354193-8-conor.dooley@microchip.com
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Based on 1 normalized pattern(s):
this program is free software you can distribute it and or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope it will be useful but without any warranty
without even the implied warranty of merchantability or fitness for
a particular purpose see the gnu general public license for more
details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 24 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.872212424@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Optional SOSC is an external fixed clock running at 32768HZ.
So Initialize SOSC rate as per PIC32MZDA datasheet.
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
pbclk_set_rate() is using readl_poll_timeout_atomic() even
though spinlock is released. Fix it by replacing with
readl_poll_timeout().
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
