Adds context binding and support for FWs with a bootloader to the code
that was added to load VPR scrubber HS binaries, and ports ACR over to
using all of it.
- gv100 split from gp108 to handle FW exit status differences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Adds the start of common interfaces to load and boot the HS binaries
provided by NVIDIA that enable the usage of GR.
ACR already handles most of this, but it's very much tied into ACR's
init process, and there's other code that could benefit from reusing
a lot of this stuff too (ie. VBIOS DEVINIT/PreOS, VPR scrubber).
The VPR scrubber code is fairly independent, and a good first target.
- adds better debug output to fw loading process, to ease bring-up/debug
v2:
- whitespace, 0->false
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Mostly preparation to fit in Ampere changes, but should result in reset
sequences a lot closer to RM's, and perhaps help out with the issues we
sometimes see reported in this area.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reset regs won't be available on Ampere while SEC2 RTOS is running, and
we're apparently supposed to be doing this on earlier GPUs too.
v2:
- fixed some excessive indentation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- replaces the hacked-up version that existed solely to support TTM
v2. remove earlier hack preventing use of non-stall intr for fences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- replaces the hacked-up version that existed solely to support TTM
- noop until the next commit, adding proper support for ampere host
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Exposes a bunch of the new features that became possible as a result
of the earlier commits. DRM will build on this in the future to add
support for features such as SCG ("async compute") and multi-device
rendering, as part of the work necessary to be able to write a half-
decent vulkan driver - finally.
For the moment, this just crudely ports DRM to the API changes.
- channel class interfaces now the same for all HW classes
- channel group class exposed (SCG)
- channel runqueue selector exposed (SCG)
- channel sub-device id control exposed (multi-device rendering)
- channel names in logging will reflect creating process, not fd owner
- explicit USERD allocation required by VOLTA_CHANNEL_GPFIFO_A and newer
- drm is smarter about determining the appropriate channel class to use
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Builds on the context tracking that was added earlier.
- marks engine context PTEs as 'priv' where possible
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- adds support for specifying SUBDEVICE_ID for channel
- rounds non-power-of-two GPFIFO sizes down, rather than up
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
And use it to cleanup multiple implementations of almost the same thing.
- prepares for non-polled / client-provided USERD
- only zeroes relevant "registers", rather than entire USERD
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Currently provided by {chan,dma,gpfifo}*.c, and those are going away.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- less dependence on waiting for runlist updates, on GPUs that allow it
- supports runqueue selector in RAMRL entries
- completes switch to common runl/cgrp/chan topology info
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- nvkm_chan_error() built on top, stops channel and sends 'killed' event
- removes an odd double-bashing of channel enable regs on kepler and up
- pokes doorbell on turing and up, after enabling channel
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- adds g8x/turing registers, which were missing before
- switches fermi to polled wait, like later hw (see: 4f2fc25c0f8bc...)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Channel groups have somewhat more complicated requirements than what we
currently support. An engine context is shared between all channels in
a channel group, VEID/subctx support (later) brings per-VEID components,
and we need to track an individual channel's engine context pointers.
This commit adds the structures and refcounting to support the above,
wrapping the prior implementation for the moment.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- supports per-runlist CHIDs
- channel group lock held across reference, rather than global lock
v2:
- remove unnecessary parenthesis
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- removes a layer of indirection in the intr handling
- prevents non-stall ctrl racing with unknown intrs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Engine context tracking will move to nvkm_cgrp in later commits, so we
create SW-only channel groups on HW without support for them.
- switches to nvkm_chid for TSG/channel ID allocation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Creates an nvkm_runl for each runlist on the GPU, and an nvkm_engn for
each engine that is reachable from a runlist.
- basically what gk104- already does, but extended to all chips
- adds per-runlist CHID allocators (Ampere)
- splits g98/gt2xx out from g84 (different target engines)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Creates an nvkm_runq for each PBDMA, these will be associated with the
relevant runlist(s) later.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
We need to be able to allocate TSG IDs as well as channel IDs, also,
Ampere has per-runlist channel IDs.
- holds per-ID private data, which will be used for/to protect lookup
- holds an nvkm_event which will be used for events tied to IDs
- not used yet beyond setup, and switching use of "fifo->nr - 1" for
channel ID mask to "chid->mask"
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Adds the basic skeleton for common channel (group) interfaces.
- common behaviour between <gk104 and >=gk104 impl's
- separates priv/user channel objects
- passthrough to existing object for now, kludges removed later
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- reads channel count from GPU from gm200 onwards
- removes gm20b/gp10b (they become identical to gm200/gp100)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Will be used to protect NVIF_CLASS_OUTP method calls from racing with
in-progress supervisor handling.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Replaces a bunch of unnecessarily duplicated boilerplate in per-chipset
code with a simpler, common, implementation.
Channel "awaken" notify code is completely gone for now. KMS has never
made use of it so far, and event notify handling is about to be changed
in general anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
No changes to code at all here, just shuffling it around and removing
a bunch of (now unnecessary) forward-declarations from headers.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
About to expose head/output path/connector objects everywhere, so we will
need support for child classes prior to nv50 now.
Somewhat cleaner than the code >=nv50 used previously.
v2:
- use ?: (lyude)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dump of one struct's members into another, with a couple of list
renames because of collisions.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We don't currently have any kind of real acceleration on Ampere GPUs,
but the TTM memcpy() fallback paths aren't really designed to handle
copies between different devices, such as on Optimus systems, and
result in a kernel OOPS.
A few options were investigated to try and fix this, but didn't work
out, and likely would have resulted in a very unpleasant experience
for users anyway.
This commit adds just enough support for setting up a single channel
connected to a copy engine, which the kernel can use to accelerate
the buffer copies between devices. Userspace has no access to this
incomplete channel support, but it's suitable for TTM's needs.
A more complete implementation of host(fifo) for Ampere GPUs is in
the works, but the required changes are far too invasive that they
would be unsuitable to backport to fix this issue on current kernels.
v2: fix GPFIFO length in RAMFC (reported by Karol)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: <stable@vger.kernel.org> # v5.12+
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916220406.666454-1-skeggsb@gmail.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
