xgmi doesn't have discrete max speeds defined. Speed numbers can be
arbitrary based on SOC. Deprecate the enum.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi_port_num interface reports external link number for port number. To
be consistent, use the external link number for reporting other XGMI
link data also.
v2: For invalid link number return -EINVAL (Kevin)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add APIs to initialize XGMI speed, width details and get to max
bandwidth supported. It is assumed that a device only supports same
generation of XGMI links with uniform width.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case of poison inband log, the error type need to be specified
by checking the deferred or poison bit of status register.
v2: check both deferred and poison bit
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Deprecate KFD XGMI peer info calls in favour of calling directly from
simplified XGMI peer info functions.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ACA error types managed by driver a direct 1:1
correspondence with those managed by firmware.
To address this, for each ACA bank, include
both the ACA error type and the ACA SMU type.
This addition is useful for creating CPER records.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <keivnyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get XGMI_v_6_4_0 link status and populate it to metrics v1_7 for
SMU_v_13_0_6
v2: Get link status register value for each soc from separate
function (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host drivers can create partial hives per guest by disabling xgmi sharing
between certain peers in the main hive.
Typically, these partial hives are fully connected per guest session.
In the event that the host makes a mistake by adding a non-shared node
to a guest session, have the KFD reflect sharing disabled by severing
the IO link.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: James Yao <yiqing.yao@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On a hive, NPS request is placed by the first one for all devices in the
hive. If the request fails, mark the mode as UNKNOWN so that subsequent
devices on unload don't request it. Also, fix the mutex double lock
issue in error condition, should have been mutex_unlock.
Fixes: ee52489d12 ("drm/amdgpu: Place NPS mode request on unload")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When reset on initialization is requested, wait for the reset to finish.
In cases where module is loaded after boot, this makes sure all
initialization work is done after a successful return of modprobe.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ramesh Errabolu <ramesh.errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a user has requested NPS mode switch, place the request through PSP
during unload of the driver. For devices which are part of a hive, all
requests are placed together. If one of them fails, revert back to the
current NPS mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a common interface in GMC to request NPS mode through PSP. Also add
a variable in hive and gmc control to track the last requested mode.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- amdgpu_ras_error_statistic_ue_count()
- amdgpu_ras_error_statistic_ce_count()
- amdgpu_ras_error_statistic_de_count()
The parameter 'err_addr' is no longer used since following patch.
Fixes: a7e8467fbe ("drm/amdgpu: Remove unused code")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new types to distinguish between ACA error type and smu mca type.
e.g.:
the ACA_ERROR_TYPE_DEFERRED is not matched any smu mca valid bank
channel, so add new type 'aca_smu_type' to distinguish aca error type
and smu mca type.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Use the mirrored topology info to fill links for VF.
The new solution is required to simplify and optimize host driver logic.
Only use the new solution for VFs that support full duplex and
extended_peer_link_info otherwise the info would be incomplete.
2. avoid calling extended_link_info on VF as its not supported
Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By catting the xgmi_port_num sysfs node, it prints out the info in the
format of <src node id>:<src port num> -> <dst node id>:<dst port num>
for one xgmi link.
For example, in case of 4 sockets fully and evenly connected setup, it
would be like as below for the first node in the hive.
01:02 -> 02:03
01:03 -> 02:02
01:07 -> 03:04
01:04 -> 03:07
01:06 -> 04:05
01:05 -> 04:06
Based on the fact that there is two xgmi links between each socket pair,
"01:02 -> 02:03" means that the current socket in question use the port 2
to connect with port 3 of the second node in the hive and so on.
v2: print out the src/dst node id for each xgmi link (lijo)
v3: replace the current_node++ with +1 to align with dst node (le)
and use the dev_err instead of pr_err (lijo)
v4: fix checkpatch warning (alex)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set_xgmi_plpd_mode may be unsupported and this isn't error, no need to
print warning for it.
v2: add ret2 to save the status of psp_ras_trigger_error.
Suggested-by: lijo.lazar@amd.com
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add these two dev attrs for xgmi info details which is helpful for
developers checking the xgmi topology by catting the sys file directly.
Take 4 cards with xgmi connection as an example, get the num_hops for each
device or node through xmig_hive_info dir like,
cat /sys/bus/pci/devices/0000:41:00.0/xgmi_hive_info/node1/num_hops
will return "00 41 41 41" where "00" stands for the hops to node1 itself
and "41" is the hops in hex format to every other node in the same hive.
There are node1/node2/node3/node4 representing 4 cards in the hive.
The same for num_links dev attr.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can specify injected instances by the mask. For backward
compatibility, the mask value is incorporated into sub block index
without interface change of RAS TA.
User uses logical mask and driver should convert it to physical value
before sending it to RAS TA.
v2: update parameter name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is xgmi3x16 pcs error status for aldebaran, driver should
check xgmi3x16 pcs error status field instead of gopx16 pcs error
status field.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pcs error count should be determined by PCS ERROR status and
PCS ERROR MASK registers, only PCS ERROR status register can not
refect error counts accurately.
Changed from V1:
remove clean noncorrectable mask registers
optimize query pcs error status
Changed from V2:
remove check mask_value bits
correct set value corresponding bit
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_get_xgmi_hive(), we should not call kfree() after
kobject_put() as the PUT will call kfree().
In amdgpu_device_ip_init(), we need to check the returned *hive*
which can be NULL before we dereference it.
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
