The flags stored in the BO grew over time without following
much a naming pattern. First of all, get rid of the _BIT suffix that was
banned from everywhere else due to the guideline in
drivers/gpu/drm/i915/i915_reg.h that xe kind of follows:
Define bits using ``REG_BIT(N)``. Do **not** add ``_BIT`` suffix to the name.
Here the flags aren't for a register, but it's good practice to keep it
consistent.
Second divergence on names is the use or not of "CREATE". This is
because most of the flags are passed to xe_bo_create*() family of
functions, changing its behavior. However, since the flags are also
stored in the bo itself and checked elsewhere in the code, it seems
better to just omit the CREATE part.
With those 2 guidelines, all the flags are given the form
XE_BO_FLAG_<FLAG_NAME> with the following commands:
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i \
-e "s/XE_BO_\([_A-Z0-9]*\)_BIT/XE_BO_\1/g" \
-e 's/XE_BO_CREATE_/XE_BO_FLAG_/g'
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i -r \
-e 's/XE_BO_(DEFER_BACKING|SCANOUT|FIXED_PLACEMENT|PAGETABLE|NEEDS_CPU_ACCESS|NEEDS_UC|INTERNAL_TEST|INTERNAL_64K|GGTT_INVALIDATE)/XE_BO_FLAG_\1/g'
And then the defines in drivers/gpu/drm/xe/xe_bo.h are adjusted to
follow the coding style.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322142702.186529-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Disable dynamic HW load balancing of compute resource assignment
to engines and instead enabled fixed mode of mapping compute
resources to engines on all platforms with more than one compute
engine.
By default enable only one CCS engine with all compute slices
assigned to it. This is the desired configuration for common
workloads.
PVC platform supports only the fixed CCS mode (workaround 16016805146).
v2: Rebase, make it platform agnostic
v3: Minor code refactoring
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A helper for managed BO allocations makes it possible to remove specific
"fini" actions and will simplify the following patches adding ability to
execute a release action for specific BO directly.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The XE_WARN_ON macro maps to WARN_ON which is not justified
in many cases where only a simple debug check is needed.
Replace the use of the XE_WARN_ON macro with the new xe_assert
macros which relies on drm_*. This takes a struct drm_device
argument, which is one of the main changes in this commit. The
other main change is that the condition is reversed, as with
XE_WARN_ON a message is displayed if the condition is true,
whereas with xe_assert it is if the condition is false.
v2:
- Rebase
- Keep WARN splats in xe_wopcm.c (Matt Roper)
v3:
- Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Replace calls to XE_BUG_ON() with calls XE_WARN_ON() which in turn calls
WARN() instead of BUG(). BUG() crashes the kernel and should only be
used when it is absolutely unavoidable in case of catastrophic and
unrecoverable failures, which is not the case here.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reduce the number of warnings reported by checkpatch.pl from 118 to 48 by
addressing those warnings types:
LEADING_SPACE
LINE_SPACING
BRACES
TRAILING_SEMICOLON
CONSTANT_COMPARISON
BLOCK_COMMENT_STYLE
RETURN_VOID
ONE_SEMICOLON
SUSPECT_CODE_INDENT
LINE_CONTINUATIONS
UNNECESSARY_ELSE
UNSPECIFIED_INT
UNNECESSARY_INT
MISORDERED_TYPE
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since memory and address spaces are a tile concept rather than a GT
concept, we need to plumb tile-based handling through lots of
memory-related code.
Note that one remaining shortcoming here that will need to be addressed
before media GT support can be re-enabled is that although the address
space is shared between a tile's GTs, each GT caches the PTEs
independently in their own TLB and thus TLB invalidation should be
handled at the GT level.
v2:
- Fix kunit test build.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
guc_mmio_regset_write() had a flags for the registers to be added to the
GuC's regset list. The only register actually using that was RCU_MODE,
but it was setting the flags to a bogus value. From
struct xe_guc_fwif.h,
#define GUC_REGSET_MASKED BIT(0)
#define GUC_REGSET_MASKED_WITH_VALUE BIT(2)
#define GUC_REGSET_RESTORE_ONLY BIT(3)
Cross checking with i915, the only flag to set in RCU_MODE is
GUC_REGSET_MASKED. That can be done automatically from the register, as
long as the definition is correct.
Add the XE_REG_OPTION_MASKED annotation to RCU_MODE and kill the "flags"
field in guc_mmio_regset_write(): guc_mmio_regset_write_one() can decide
that based on the register being passed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230429062332.354139-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that struct xe_reg and struct xe_reg_mcr are types that can be used
by xe, convert more of the driver to use them. Some notes about the
conversions:
- The RTP tables don't need the MASKED flags anymore in the
actions as that information now comes from the register
definition
- There is no need for the _XE_RTP_REG/_XE_RTP_REG_MCR macros
and the register types on RTP infra: that comes from the
register definitions.
- When declaring the RTP entries, there is no need anymore to
undef XE_REG and friends: the RTP macros deal with removing
the cast where needed due to not being able to use a compound
statement for initialization in the tables
- The index in the reg-sr xarray is the register offset only.
Otherwise we wouldn't catch mistakes about adding both a
MCR-style and normal-style registers. For that, the register
is now also part of the entry, so the options can be compared
to check for compatible entries.
In order to be able to accomplish this, some improvements are needed on
the RTP macros. Change its implementation to concentrate on "pasting a prefix
to each argument" rather than the more general "call any macro for each
argument". Hopefully this will avoid trying to extend this infra and
making it more complex. With the use of tuples for building the
arguments, it's not possible to pass additional register fields and
using xe_reg in the RTP tables.
xe_mmio_* still need to be converted, from u32 to xe_reg, but that is
left for another change.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-10-lucas.demarchi@intel.com
Link: https://lore.kernel.org/r/20230427223256.1432787-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The defines for the registers were brought over from i915 while
bootstrapping the driver. As xe supports TGL and later only, it doesn't
make sense to keep the GEN* prefixes and suffixes in the registers: TGL
is graphics version 12, previously called "GEN12". So drop the prefix
everywhere.
v2:
- Also drop _TGL suffix and reword commit message as suggested
by Matt Roper. While at it, rename VSUNIT_CLKGATE_DIS_TGL to
VSUNIT_CLKGATE2_DIS with the additional "2", so it doesn't clash
with the define for the other register
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There's no good reason to keep the GuC registers outside the regs/
directory: move the header with GuC registers under that.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reprogramming the LNCF MOCS registers on render domain reset is not
intended to be regular driver programming, but rather the implementation
of a specific workaround (Wa_1607983814). This workaround no longer
applies on Xe_HP any beyond, so we can expect that these registers, like
the rest of the LNCF/LBCF registers, will maintain their values through
all engine resets. We should only add these registers to the GuC's
save/restore list on platforms that need the workaround.
Furthermore, xe_mocs_init_engine() appears to be another attempt to
satisfy this same workaround. This is unnecessary on the Xe driver
since even on platforms where the workaround is necessary, all
single-engine resets are initiated by the GuC and thus the GuC will take
care of saving/restoring these registers. The only host-initiated
resets we have in Xe are full GT resets which will already
(re)initialize these registers as part of the regular xe_mocs_init()
flow.
v2:
- Add needs_wa_1607983814() so that calculate_regset_size() doesn't
overallocate regset space when the workaround isn't needed. (Lucas)
- On platforms affected by Wa_1607983814, only add the LNCF MOCS
registers to the render engine's GuC save/restore list; resets of
other engines don't need to save/restore these.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Create regs/xe_gt_regs.h file with all the registers and bit
definitions used by the xe driver. Eventually the registers may be
defined in a different way and since xe doesn't supported below gen12,
the number of registers touched is much smaller, so create a new header.
The definitions themselves are direct copy from the
gt/intel_gt_regs.h file, just sorting the registers by address.
Cleaning those up and adhering to a common coding style is left for
later.
v2: Make the change to MCR_REG location in a separate patch to go
through the i915 branch (Matt Roper / Rodrigo)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Create regs/xe_engine_regs.h file with all the registers and bit
definitions used by the xe driver. Eventually the registers may be
defined in a different way and since xe doesn't supported below gen12,
the number of registers touched is much smaller, so create a new header.
The definitions themselves are direct copy from the
gt/intel_engine_regs.h file, just sorting the registers by address.
Cleaning those up and adhering to a common coding style is left for
later.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sort includes and split them in blocks:
1) .h corresponding to the .c. Example: xe_bb.c should have a "#include
"xe_bb.h" first.
2) #include <linux/...>
3) #include <drm/...>
4) local includes
5) i915 includes
This is accomplished by running
`clang-format --style=file -i --sort-includes drivers/gpu/drm/xe/*.[ch]`
and ignoring all the changes after the includes. There are also some
manual tweaks to split the blocks.
v2: Also sort includes in headers
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
